Hoff Online Auctions
Metro Machine & Engineering - Day 2 Closing June 10th - Starting at 10:00am CT

Item Description
751.Assorted Electrical Items Including Wire Connectors, Hole Plugs, High Temp Wire Nuts, Vibro Block Indicators and More. Items Located In Drawer, Bring Container For Removal and Pickup Prior To Final Removal Day.
752.Assorted Electrical Items Including Heat Shrink Wraps, Speed Pots, 9-25 Pin Connectos, and More Shown. Items Located In Drawer, Bring Container For Removal and Pickup Prior To Final Removal Day.
753.Electrical Box Hardware Including Nipples, Sealing Rings, Pipe Plugs, Insulating Bushings, Click Conduit Supports, Jiffy Clips, Plastic Cable Clamps, and More. Items Located In (2) Drawers, See All Photos For Contents. Bring Container For Removal and Pickup Prior To Final Removal Day.
753.1.Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. All Items are Sold AS IS/Where IS and with All Faults. Please Carefully Inspect Items Before Bidding. Click on this lot for more information.
753.2.Please click on this lot for Preview Times at the Metro Machine and Engineering Online Auction.
753.3.Please click on this lot for Rigging Information at the Metro Machine and Engineering Online Auction.
753.4.UPS Shipping Available for small items Click here for more information.
753.5.This auction features EXTENDED BIDDING! View this lot to learn more.
753.6.This auction STARTS TO CLOSE at 10:00 AM Central Time at a rate of 5 lots per minute. Click this lot to learn more.
753.7.How much time is left?
753.8.Click on This Lot For Important Removal Information at the Metro Machine and Engineering Online Auction.
754.(3) 6"x8"x1-1/4" Thick Angle Plates, 6" Base Depth.
755.NSF 2 Shelf Wire Cart, Overall: 36"x 24"x30".
756.Assorted Tool Holder Parts Including (10) Redline RC 4HRKC Pull Studs, and Assorted Collets Shown.
757.(10) Redline Cat 40 Endmill Type Tool Holders From 1/4" Up to 3/8".
758.(3) Angle Plates, (2) 9"x12"x1" Thick Plates, (1) 12"x20"x1-1/8" Thick Plate.
759.(5) Cat 40 ER20 Collet Type Tool Holders, (3) Redline Brand, (2) Fahrion Centro HPC20.
760.(3) Shell Mill Cat 40 Taper Tool Holders w/ Shell/Face Mills, Dia. From 2" Up to 3". See Photos For Specifics.
761.Assorted Air Tools Including 1/2" Ingersoll Rand Impact Wrench, Sioux 3/8" Cap. Drill, and Assorted Gauges.
762.(2) Demagnetizers and DC Magnetometer, (1) Butler 6" Cap. Pass Through, (1) Ideal Cat. No. 13-011 Pass Over Type, and (1) Alpha Lab DC Magnetometer (Gauss) Specialty Gage.
763.Specialty Electrical Items Including Fuses From .6 Amps Up to 100 Amp, Relays, and More Shown. Items Located In Drawer, Bring Container For Removal and Pickup Prior To Final Removal Day.
764.(3) Workholding Pieces Including Adjustable Angle 8" x 5-3/4" Per Side Angle Plate, and (2) 4"x12" Angle Plates.
765.Large Assortment of New Light Bulbs, Cart Not Included.
766.Monarch Model Nova Strobe Timing Light w/ DRO.
767.(8) Cat 40 Redline Brand Endmill Type Tool Holders, Dia. From 7/16" Up to 1-1/4".
768.Lista 2 Door/ 4 Drawer 40 Taper Tool Holder Ball Bearing Slide Storage Cabinet w/ (70) 40 Taper Tool Holder Pockets. Overall: 28"x30"x60".
769.Greenlee Model 79045B Quick Draw 90 Hydraulic Punch Driver w/ Case, 1/2" Up to 2" Slugbuster Dies.
770.(4) 120V. Power Tools Including Makita Model 4304 Jig Saw, 45 Degree Driver, 90 Degree Driver, and Black and Decker 3/8" VSR Holegun Drill.
771.(4) 120 V. Power Tools Including (2) Master Heat uns, and (2) Milwaukee 1/2" Cap. Magnum Hole Shooter Drills.
772.2 Door Shop Cabinet, Overall: 36"x18"x78".
773.Tooling Including 5C Collet Fixture, Collet Blocks, Parallels, 11 Piece Angle Block Set, Riser Blocks, (4) R8 Collet Holders, and More Shown.
774.Big Daishowa Model BCV40/50 High Speed Spindle Pneumatic Powered GT64, 15,000 RPM, ER16 Collet Type Tool Holder on 50 Taper Tool Holder, Includes Manuals Shown.
775.Criterion Model 203 B Boring Head on Cat 40 Tool Holder w/ 3/4" Holes.
776.(4) Cat 40 ER32 Collet Type Tool Holders Including (3) Fahrion Model HPC32.
777.Justrite No. 25450 Flammable Liquid Cabinet, 45 Gallon Capacity, 43" x 18" x 65-1/2"
778.(4) Sets of Tools Including (2) Bondhus Prohold 3/8" Drive Socket Bit Sets, Starrett Hole Saw Kit, and Sunnex 1/2" Impact Metric Allen Head Socket Kit From 6 Up to 19 MM.
779.Milbar Set 43R Retaining Ring Plier Set, 12 Piece Set w/ Case.
780.(2) Greenlee Model 7804SB Quick Draw Hydraulic Punch Driver w/ Punches From 1/2" Up to 2", * One Set Missing Punches as Shown.
781.(1) Section of Portable Racking. 102" x 29" x 104" H
782.Cal Hawk Model 240-2127 12-Speed Drill Press, 280-3280 RPM, 6-3/4" Throat, 11-1/2" Table Dia, 3/4 HP, 110 Volts
783.(1) Section of Portable Racking. 102" x 29" x 116" H
784.Rol-Lift Pallet Jack. 48" x 7" Forks with 18" Between
785.(1) Section of Portable Racking. 102 x 29 x 104" H
786.Cummins Mack Model CM16F Drill Press, 16-Speeds from 195-3500 RPM, 8 1/2" Throat, 14" Table Dia, #2MT Spindle, 3/4 HP, 115 Volt
787.(1) Section of Portable Racking. 102" x 29" x 104" H
788.Rol-Lift Pallet Jack. 48" x 7" Forks with 18" Between
789.Assorted Hand Tools Including (3) Pipe Benders, (2) Pana Vise's, Pullers, and More Shown.
790.(2) Portable Digital Hand Tachometers Including Mitutoyo Model 982-521 w/ Case and Anvils, and Tak-ette Model 1716 w/ Anvils and Case.
791.Fluke Model S4 2 Digital Thermometer w/ Various Surface Temp Probes.
792.Duymo Rhino Pro 3000 Thermal Label Printer w/ (2) New Cartridges, Battery Powered or Power Supply Included.
793.(1) Section of Portable Racking. 102" x 29" x 104" H
794.(4) Metal Framed Benches, 60" x 39" x 71" Each
795.Econline Model RA-42x24 Blast Cabinet, s/n E-82-1829 42" x 24" Chamber Size, 17" x 10-1/2" Door, Collection System, 1-Phase, 42" x 45" x 65"
796.Cincinnati 16 Royal Drill Press, 485-5289 RPM, 8-1/4" Throat, 10" x 10" Table, 1/3 HP, 115/210 Volt, 1-Phase
797.2 Door Cabinet w/ Contents of Hold Down Hardware, Parallels, and More Shown. Cabinet Measures: 30"x18"x66".
798.(4) Quick Change Tap Holder Tool Holders, (3) Cat 40 Taper, (1) 3/4" Straight Shank Arbor.
799.Criterion 203D Adjustable Boring Head on Cat 40 Taper Shank, 3/4" Dia. Holes.
800.Metal Stock w/ Rack, Sizes From 19"x10", 1" Plate Up to 61-1/2"x12", 3/4" Plate.
801.2 Shelf Metro NSF Wire Frame Cart, Overall: 48"x24"x32".
802.(33) ER20 Collets, Dia. From 1/8" Up to 7/16".
803.Acrotech 72"x42" Tilting Table On Casters, Tilts Up to 90 Degrees, 120V. At Rest 29" Height, Weight Cap. 1,000 Lb.
804.(6) Pneumatic Tools Including (2) Needle Scalers, (1) Straight Die Grinders, (1) Impact Hammer, (1) Palm Sander, and (1) Ingersoll Rand Cut Off Tool,
805.30-1/2" 2 Sheet Roll Mounted on Metal Stand. 46 x 20 x 50"
806.(4) Dyna Brade Type Pneumatic Files.
807.(4) 120V. Grinders Including Dewalt 4-1/2" Angle Grinders, (2) Makita 4-1/2" Angle Grinders, and (1) Milwaukee 7" Angle Grinder, and More Shown.
808.(2) Milwaukee 120V. Heavy Duty Grinders, (1) Cat. No. 6098 7" Angle Grinder/Sander, and (1) Cat. No. 5243 6" Straight Grinder.
809.(2) Milwaukee 120V. Power Tools Including Cat. No. 6519-31 Sawzall w/ Case, and (1) Cat. No. 6066 7"/9" Sander.
810.Assorted Hydraulic Test Equipment
811.5 Shelf Shop Cabinet w/ Contents. Overall: 36"x18"x75".
812.(12) Quick Change Tap Holders.
813.6" Dia. Cushman Model 234B 3 Jaw Chuck, 1-1/2" Through Hole, Bolted to Plate But Includes Thread on Type Back Plate.
814.Pneumatic Tools Including (5) 5" Assorted Grinding/Buffing Orbital Sanders w/ Pads, and (1) Straight Die Grinder.
815.Cordax 100 Coordinate Measuring Machine with Bendix 3-Axis DRO, Assorted Probes, 30" x 19" Table, 50" x 42" x 94" Overall.
TK Rigging will load this Item for $100
816.(4) Belton Pneumatic Abrasive Belt Sanders. (1) B-10B, (3) B-20C.
817.2 Door Metal Storage Cabinet w/ Contents of Welding Consumables Including Mig Gun Tips, Oxy-Acetelene Torch Heads, Tig Torch and Lines, Welding Masks, and More. Cabinet Measures: 36"x18"x78".
818.Welding Safety Items Including Leather Coat and Bibs, Gloves, Flame Resistant Cotton Sleaves and More.
819.(2) APC Netshelter Server Cabinets, Each Measure: 24"x35"x46".
820.Clausing Model 2286 Drill Press, s/n 507629 10" Throat, 40" x 24" Table, 150-2000 RPM, 1.5 Hp, 1,800 RPM, 220 Volt, 3-Phase, 36" x 47" x 84".
TK Rigging will load this Item for $100.
821.(2) 40 Taper Multi Position Rotating Tool Holder Stands.
822.Assorted Tooling Including (3) R8 Shank Tools Including 3-3/4" Shell Mill w/ Holder, Adjustable Boring Head w/ 5/8" Dia. Holes, Jacobs 14N, 0-1/2" Cap. Chuck, and (3) Straight Shank Tools Including Tree Groove Tool, Adjustable Boring Head and More.
823.(3) Shop Fans
824.(2) Safety Stairs, (1) 40", (1) 30"
825.Group of Assorted Space Heaters and Fans
826.Group of Step Stools
827.(8) Assorted Shop Carts
828.(5) Assorted Shop Carts
829.(5) Shop Fans
830.Metal Framed Table. 72 x 26 x 34" H, (Contents Not Included)
831.(5) Assorted Shop Carts
832.(5) Assorted Shop Carts
833.60" x 34-1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
834.(5) Assorted Shop Carts
835.60" x 34-1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
836.(4) Assorted Shop Carts
837.(3) Shop Fans
838.Metal Frame Table w/ Overhead Lights and Contents of Misc. Hold Down Hardware, Overall: 60"x30"x34". * Table Bolted to Platform, Bring Tools For Removal.
839.2 Shelf Metro NSF Wire Frame Cart, Overall: 48"x24"x32".
840.Assorted Small Parts Cabinets, Storage Boxes, Laptop Bags, and More
841.4 Shelf Metro NSF Rolling Wire Rack, Overall: 60"x24"x60".
842.(2) Dewalt 18v Cordless Drills
843.Dewalt Model D25551 Rotary Hammer with Assorted Bits
844.Assorted Dewalt Power Tools
845.60" x 34-1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
846.Assorted Hand Tools
847.Assorted Power Tools Including Dewalt D28402W Angle Grinder, Makata 4204 Jig Saw, Black & Decker Circular Saw, Craftsman Belt Sander
848.Assorted Dewalt Power Tools, DW618 Router, Palm Sander
849.(4) Dewalt 18v Cordless Drills with Batteries and Chargers
850.Group of Assorted Conduit, Tubing, Hose, and More
851.Custom 5C Collet Holder Mount w/ Material Support Arm and Custom Back Mount Plate.
852.Acrotech 72"x42" Tilting Table On Casters, Tilts Up to 90 Degrees, 120V. At Rest 29" Height, Weight Cap. 1,000 Lb.
853.(10) Toolex Parallel Sets w/ Stand From 3/4" Up to 1-5/8".
854.60" x 34-1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
855.(16) Unit Locker Station, 70" x 30" x 80"
856.Group of Assorted Conduit, Tubing, Hose, and More
857.Group of Assorted Dewalt 18v Batteries, 12v Charger, DW919 Light, and more
858.Assorted Sharps Containers
859.(4) Dewalt 18v Cordless Drills with Batteries and Chargers
860.(2) Brady Model TLS2200 Thermal Label Printers and Accessories
861.Group of Assorted Safety/Hazard Labels
862.(10) Hard Hats with (2) Hearing Protectors
863.60" x 34-1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
864.Table w/ Contents of Hold Down Hardware, Table Measures: 60"x30"x35".
865.(5) Movable Room Dividing Panels, 70" Height, 96" Panels.
866.Assorted Shop Stools and Chairs.
867.Large Assortment of Magnemotion Brand Magnets and Components Including Approx. (48) Model 150301162 Bases, Rails, Corner Slides and More. Cart Not Included.
868.5 Shelf Heavy Duty Cart, Overall: 61"x34"x71". Contents Not Included.
869.(5) Chip Baskets
870.Shop Cart, Overall: 36"x24"x36", Contents Not Included.
871.21 Bin Metal Small Drop Steel Organizer, Overall: 64"x32"x71".
872.Metal 7-Tier Cantilever Type Stock Rack, Overall: 64"x32"x71".
873.4 Compartment Sheet Stock Rack, 7-1/2" Deep Compartments, Overall: 78"x39"x52".
874.Rack w/ Contents of 0-1" Drill Rods. Lengths Up to 36".
875.(3) Moveable Room Dividing Panels, 70" Height, (2) Panels 96", (1) 48" Panel.
876.22 Position 40 Taper Tool Holder Stand.
877.Table w/ Contents of Hold Down Hardware and (5) Boring Bars, Table Measures: 60"x30"x35".
878.Heavy Duty 5 Shelf Shop Cart, Overall: 61"x35"x71". Contents Not Included.
879.Table w/ Contents Including Hold Down Hardware and Angle Plates Up to 6"x8"x9-3/4".
880.(2) 40 Taper Multi Position Rotating Tool Holder Stands.
881.60" x 34 1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
882.60" x 34 1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
883.(7) Hard Sided Travel Cases
884.Assorted Electrical as Shown
885.Large Assortment of Air Valves, Filters, Machine Components, Electrical, and More
886.60" x 34 1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
887.(2) Brady Model TLS2200 Thermal Label Printers
888.60" x 34 1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
889.Large Group of Assorted Electrical, Machinery Components, and More
890.Group of Labels for Brady Label Printers
891.Lifting Chains Including (1) Dual Branch Lifting Chain, 5' Reach, 60 HOR, 3/8" Dia. Link, Grade 8, (1) Dual Branch Drum Lifter, 1/2 Ton WLL, Grade 8, 42" Reach.
892.60" x 34 1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
893.(2) Dymo 2000 Label Printers
894.Pair of 5' Fork Extensions, Fits 4-1/2" Wide Forks.
895.60" x 34 1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
896.Fixed Arm Cantilever Stock Rack w/ Contents of Stock Including (1) 5-1/2" Dia. Aluminum, 1/2" Wall Round Tube Length Approx. 240". (6) 3"x3" Aluminum Angle Pieces, 112" Lengths, Steel Tubing Up to 3-3/4" Dia. 5/8" Thick Wall 194" Length, Threaded Rod, Plastics, and More. Rack Consists of (5) 104" Double Sided 4 Arm Uprights.
897.Group of Stainless Piping, Vibro Block, Vibrators, Electrical, and More as Shown
898.(2) Adjustable Metal Shelving Units w/ Contents of Mainly Painting Supplies.
899.Rolling 2 Drawer Shop Maintenance Cart w/ Wilton 4-1/2" Vise. Includes Contents of Plumbing Parts and Tools, Overall Unit Measures: 18"x24"x37".
900.(7) C- Clamps Including (4) 10" Cap. X 5-1/2" Throat, and (3) 8-1/2" Cap. X 5" Throat.
901.60" x 34 1/2" x 71" Heavy Duty Shop Cart (Contents Not Included)
902.(3) Multi Door Rolling Storage Cabinets Including (2) 4 Door 35"x28"x68" Cabinets, and (1) 2 Door 36"x24"x37" w/ Removable Top Opening Cabinet Measuring 20"x14"x14".
903.(4) 90 Degree Welding Clamps, 4" Materia Holding Cap, 2-1/2"x8" Clamping Edge.
904.Shelving Units w/ Contents of Electrical and Machine Parts, Shelving Unit Measures: 108"x18"x75".
905.Adjustable Double Sided Stock Rack w/ Contents of Stock Material Including Plastic Round Stock Up to 1-1/2" Dia, Angle Aluminum Stock From 1"x1" Up to 3"x3", Steel Angle From 1"x1" Up to 2-1/2"x2-1/2", Stainless Steel and Aluminum Bar Stock From 1/2" Dia Up to 1-1/2" Dia, Square Aluminum and Steel Bar Stock Up to 1-1/2"x6"x60" and More, Rack Consisting of (6) 84" Uprights, (84) 12" Cantilever Arms and Brackets, * Aluminum Extrusion On Rack Not Included.
906.Assorted Square Bar Stock and Cut Plate Stock Including Aluminum and Stainless Steel, Sizes From 3/8"x3/4" Up to 5"x1", Lengths Up to Approx. 144".
907.Aluminum Extrusion including (6) 3"x1-1/2" 80/20 Pieces, Mainly 17' Lengths, (1) 3"x3" 80/20 17' Length, and (1) 1-1/2" x 1-1/2" 80/20 At Approx. 12' Length.
908.Heavy Duty Metal Stock Rack, Overall: 96"x42"x108", Unit Top Unbolts and Removes as Shown In Photos. * Contents Not Included, Last Day Removal Only.
909.Assorted Stock Material On Floor, * Nothing Located On Shelving, Includes: 6"x8"x156" Angle, Square Bar Stock Up to 4"x2"x86", Square Tube Up to 7"x5"x87", 5-1/4" Dia. X 60" Aluminum Bar Stock, 4"x2" Stainless Steel Square Tubeing w/ Lengths Up to 240", and More Shown.
910.Metal 6 Shelf Adjustable Racking Consisting of (4) 36"x12"x75" Shelving Units.
911.Custom Built Loading Dock Stand w/ Tools Including Johnson Bar, Wheel Chocks, 58" Fork Extensions w/ 4" Opening, and More.
912.Bernard Mig Torch w/ Hose and Assorted Consumables Shown.
913.Assorted Hand Tools Including 120V. 4-1/2" Ange Grinder, Slag Hammers, Hack Saws, Edge Forming Tools, Wire Brushes, Pipe Bender, and More Shown.
914.Metal Stock Rack Shelving Unit w/ Conduit, Overall Unit Measures: 35"x24"x84".
915.Tennant Model 186E 26" Wide 12V. Walk Behind Floor Sweeper, Overall: 54"x36"x32", Rear Wheel Needs Replacement Lining.
916.Pair of 68" Fork Extensions, Fits, 5-1/2" Wide Forks.
917.Contents of Mezzanine Office Including 36"x24"x78" 2 Door Cabinet, (4) Metal Frame Desks, (3) File Cabinets, and (2) Office Chairs.
918.Assorted Plastic and Vinyl Sheeting Material Rolls.
919.Collection of Brooms and Dustpans.
920.Metal Cabinet w/ Spill Cleanup Kits, Overall Cabinet Measures: 30"x12"x30".
921.Metal Frame Workbench w/ Overhead Light, Overall Table Measures: 60"x30"x34", 89" Overall Height, Contents Not Included.
922.Stock Material Including: Stainless Steel and Aluminum Roundstock From 3/8" Dia. Up to 2", Lenghts Up to 144", Hex Stock, Square Stock, From 5/8" x 1-1/2" Up to 2"x2", Lengths Up to 144" and More Included. *Stock Rack Not Included. Pick Up prior to Last Removal Day.
923.Round Bar Stock Material Including Aluminum and Steel, Dia. From 1-1/4" Up to 3-1/2", Lengths Up to Approx. 144". *Stock Rack Not Included. Pick Up prior to Last Removal Day.
924.Assorted Square Bar Stock and Cut Plate, Including Aluminum, Stainless Steel, and More, Sizes From 1/4"x1/2" Up to 1-1/2"x2", Lengths Up to Approx. 144". *Stock Rack Not Included. Pick Up prior to Last Removal Day.
925.(5) Metal Shelving Units w/ Contents Including: Electrical, Shop Maintenance, Plumbing, Machine Parts, and More, Length of Entire Unit Assembled: 187", See Photos For Contents.
926.Welding Room Partition Wall, Includes (2) Curtain Entry Points, and (2) 96" Panel Walls, Overall 33' Section.
927.(2) Wagner Power Quick Touch Roller Auto Rolls w/ Continuous Paint Output.
928.(17) Clamps Including (4) KNU-Vise P-400, Assorted Vise Grips, (2) Sissa 12" Cap. X 8" Throat, and More Shown.
929.Assorted Welding Regulators and More Shown.
930.(8) Pony Pipe Clamps.
931.(11) C-Clamps, (10) 6" Cap. X 4" Throat, (1) 8" Cap. X 4-1/2" Throat.
932.(11) Kant Twist Clamps Including (1) 3", (2) 4-1/2", (6) 6", and (2) 6D.
933.Group of Assorted Files.
934.36" Wide Slanted Metal Stock Rack w/ Assorted Threaded Rod From 5/16" Up to 1-1/2".
935.Rolling 4 Door Cabinet, Overall: 36"x28"x67".
936.Stock Rack w/ Contents of Plastic Sheet and Round Stock, Sheets Up to 48"x48" 3/4" Material, Round Stock Material Up to 6" Dia. X 20".
937.Assorted Cleaning and Blowoff Air Tools.
938.(2) Heavy Duty Custom Built Welded Frame Stock Racks w/ Contents of Stock Material, (1) Rack Measures 152"x58"x125" w/ (4) Pallet Type 144"x50" Storage Compartments, and (6) Pocket Type 6"x52"x144" Pockets, Stock Material Includes Aluminum, Plastics, Stainless Steel, and More, Largest Material Piece is Blue Acrylic 48"x96" Sheets.
939.Tennant Model 2100 Floor Machine w/ Manual and Additional Scrubbing/Cleaning Pads.
940.Delta Model AP300 3/4HP Shopmaster Dust Collector Mounted To Cart, 120/240V. 9/4.5 Amp, Currently Wired For 120V, Includes Dust Collection Hose, Bag Filter w/ Additional Filter Bags.
941.(8) 72"x30" Collapsible Tables.
942.(2) Armstrong No. 6 Plate Clamps, 6" Cap.
943.(2) Heavy Duty Stock Carts, (1) 84"x44", (1) 84"x27" Both w/ 12" Height Material Side Upright Arms. Material Shown Not Included.
944.Hydraulic Foot Operated Die Lift Cart, 24"x24" Platform, Lifts Up to Approx. 36".
945.Nobles/Tennant Model 608311 Speed Scrub 2001 HD Walk Behind Floor Scrubber, 24 V. Battery w/ MAC SCR 24V Output, 120V. Input Battery Charger, 22" Wide, 52" Length, 42" Height.
946.Miller Spoolmatic 1 Feeder/gun w/ Millermatic WC-1 Weld Control Box. Includes Spools and More Shown.
947.(3) Shop Carts, Dimensions Up to 36"x24"x36".
948.Assorted Abrasives Shown.
949.(11) C-Clamps From 3" Up to 4-1/2" Cap.
950.Adjustable 3 Shelf Heavy Duty Rolling Rack, Overall: 102"x28"x69", Contents Not Included.
951.Assorted Electrical Disconnects and Flexible Conduit Drop Cords.
952.P.W. Platforms Inc. Rolling Safety Staircase, 24" Wide Stairs, 40" Height to top Platform, Overall: 26"x42"x70".
953.Large Assortment of Hoffman Enclosure Boxes and Hoffman Wireway Boxes.
954.Variable Speed Servo Motor w/ Control and Belted Right ngle Double Sided Gearbox, 60:1 Ratio, See Photos For Additional Specs.
955.(2) Morteed Corp. Automated Assembly Line Stainless Steel Vibratory Hopper Feeder Assemblies, Overall: 23"x11"x14".
956.Assorted Polystyrene Foam Sheets, Sizes From 24"x48" Up to 48"x96".
957.Large Assortment of Large Dia. PVC Vacuum Fittings.
958.Sealed Drum of (500) Clay Dessicant Kraft Bag Clean Up Kits.
959.Werner Adjustable Height Scaffolding, Overall: 74"x24", Platform Height From 24" Up to Approx. 64".
960.Specialty Pneumatic Coolant /Oil Filtration Removal System, w/ Ingersoll Rand ARO Diaphram Pump, Overall: 24"x40"x32", Reservoir Tank Measures: 24"x20"x16", Includes Metal ans and More Shown. * Oils Shown In Reservoir and Hose will Be Removed Prior to Pickup.
961.Wesco 1500 Lb. Cap. Forklift Drum Lifting Attachment, 5-1/2"x2" Fork Pockets.
962.Vibratory Bowl Feeder Vibration Unit, Missing Bowl, Controlled By Arthur G. Russell Model VBC-16VFP Digital Control, Appears To Contain (12) 4"x4" Vibration Units, Unknown Power Requirements, Overall: 30" Dia. X 12" Height.
963.Large Assortment of Plastic Trash and Recycling Cans.
964.(2) Rolling Maintenance Carts, (1) 18"x18"x33", (1) 29"x20"x33" w/ Drawer.
965.Partial Spool of Electri-Flex Co. Type LT1-1/4" Sunlight Resistant Flexible Conduit.
966.(6) Blower Motors, (2) 115V. Single PH., (1) 208/230 Single PH, (3) 3 PH. See Photos For Details.
967.Pallet w/ Dozens of Anti-Fatigue Mats.
968.Section of Pallet Racking Including (4) 168"x42" Teardrop Style Uprights, (12) 144" Crossmembers and Wire Decking. * Contents Not Included, Last Day Removal and Bring Tools To Disassemble, See Photos For Details.
969.Intermetro NSF 2 Shelf Cart, Overall: 48"x24"x32".
970.Approx. (200) Large Akrobins, Up to 16"x16"x12".
971.Section of Pallet Racking Consisting of (6) 144"x36" Uprights, (24) 120" Cross Members, and Wire Decking. * Contents Not Included, Last Day Removal and Bring Tools To Disassemble, See Photos For Details.
972.Dozens of Extension Cords, Some 220V.
973.Locker Room Set Up Including (2) 72"x12"x18" Benches, and (3) Edsal 16 Cubby Locker Units w/ Middle Cutout For Hanging. Overall: 70"x19"x72".
974.P.W. Platforms Inc. Rolling Safety Staircase, 24" Wide Stairs, 40" Height to top Platform, Overall: 26"x42"x70".
975.Stock Cart, Overall: 84"x27"x16", 12" Height Stock Holding Arm Rails.
976.(2) Powder Coated Benches, (1) 96", (1) 72".
977.Shopfox Model W1733 Downdraft Sanding Table, 20"x40" Table Size, 4" Dustport Size, Overall: 20"x40"x6-1/4".
978.Section of Pallet Racking Including (4) 168"x42" Teardrop Style Uprights, (12) 144" Crossmembers and Wire Decking. * Contents Not Included, Last Day Removal and Bring Tools To Disassemble, See Photos For Details.
979.Large Assortment of Welding Electrodes/ Brazing Rod/ Tig Rods. Types Shown.
980.Oversize Heavy Duty Strong Magnet, Overall: 24"x17"x14", w/ 12" x 12" Pass Through.
981.Section of Pallet Racking Consisting of (6) 144"x36" Uprights, (30) 120" Cross Members, and Wire Decking. * Contents Not Included, Last Day Removal and Bring Tools To Disassemble, See Photos For Details.
982.Large Assortment of Mig Welding Spools, Types Shown.
982.1.(5) Material Holding Stands Including (2) 31"x27" Metal Sawhorses, (2) 30"x16" Metal Sawhorses, and (1) 12" Adjustable Height Roller Stand.
983.(2) Roller Track Type Machine Moving Dollies, Each: 8"x4-1/2" Top Platform.
984.CM Model L 1 Ton Lodestar Hoist, Pendant ontrol and Chain Basket, 1 HP, 440-480V. 3 PH. Convertible to 208-240V. 3 PH. Also Incudes (2) Coffing 1 Ton Cap. Trolleys.
985.Werner 7' Fiberglass A-Frame Ladder, 300 Lb. Cap.
986.Acme Cat. No. T-1A-53343-35 Style G Step Down Transformer, Primary: 480 V. 3PH, Secondary:240/120High Leg, 45 KVA, Overall: 27"x23"x23" and 400 Lbs.
987.(5) Shop Vac Type Vacuums, (4) 16 Gallon Cap. 6 Peak HP, 170 Blowing MPH.
988.Section of Pallet Racking Including (4) 168"x42" Teardrop Style Uprights, (14) 144" Crossmembers and Wire Decking. * Contents Not Included, Last Day Removal and Bring Tools To Disassemble, See Photos For Details.
989.(3) Entry Floor Mats, (1) New 3'x5'.
990.Parlec Model Parsetter 220 Tool Setter, S/N: PO 188 B, Foot Pedal Control, Parlec MP500 2 Axis DRO, Stocker & Yale Model 7MC-1701 Compareter Head. Overall: 36"x18"x42".
991.Section of Pallet Racking Consisting of (6) 144"x36" Uprights, (34) 120" Cross Members, and Wire Decking. * Contents Not Included, Last Day Removal and Bring Tools To Disassemble, See Photos For Details.
992.(2) Dayton Model 6W047, 500 Lb. Cap. Aluminum 2 Wheel Dollies, Pneumatic Tires.
993.Kenmore Combination Fridge/Freezer, Overall: 31"x30"x71".
994.(2) Masterforce Model MX042 Collapsable/ Adjustable Height Saw Horses, Adjustable Heght From 22" Up tp 32".
995.(2) 2 Wheel Dolly's.
996.Intermetro NSF 2 Shelf Cart, Overall: 48"x24"x32".
997.Milwaukee Model 40710 Appliance Dolly w/ Stair Tracks.
998.Section of Pallet Racking Including (4) 168"x42" Teardrop Style Uprights, (14) 144" Crossmembers and Wire Decking. * Contents Not Included, Last Day Removal and Bring Tools To Disassemble, See Photos For Details.
999.Thern Inc. 2 Ton Cap. Chainfall Manual Hoist, 10' Chainfall w/ Swivel Clevis Chain End, Also Includes CM Herc-Alloy 21" Dual Branch Lifting Chain, 7/32" Dia. Links, WLL 60, HOR3600.
1000.Plymo Vent Articulated Welding Snorkel Type Vacuum System, Model FM25 Built In 84" w/ 50KG Max Cap Overhead Trolley, 17' Overall Reach. * Wire Feeder Connected to Trolley Not Included, Buyer Responsible For Safe and Responsible Removal.
1001.Assorted Machine parts
1002.Group of Misc. Including: (1) Microscopes, Lighted Magnification Lamps, Misc. Electrical Testing and More.Note: Microscope Under Cover Not Included
1003.Assorted Fasteners, Washers, Bolts and More.
1004.(3) Paslode Air Nailers and Craftsman Circular Saw.
1005.(2) Chatillon DGGS-R-250G Digital Force Gauges.
1006.Yektronix TDS 2014 4-Channel Digital Storage Oscilloscope with Case.
1007.Custom Drying Rack. 101" x 42" x 82".
1008.Pneumatic Paint Shaker.
1009.Paper cart.
1010.Partial Box of XL Coveralls and Box of 20" x 25" x 1" Paint Arrestors.
1011.Assorted Paint Guns and PPE.
1012.Custom Built Paint Booth. 8' x 3' x 80" H, Sprinkled, Overhead Lighting.
1013.(4) Sections of Pallet Racking. (6) 96" x 27" Uprights, (12) 96" L Crossmembers, Wood Decking.
1014.Assorted Drum Carts and Drum Clamp.
1015.Pallet of Block.
1016.(2) Hose Reels.
1017.North Star no. 1573011H Pressure Washer, 2000 psi, 115 volt.
1018.Toro GTS 6.5 hp Lawn Mower.
1019.Toro Model CCR 2500 GTS Snowblower. (Needs Carb Work)
1020.Toro Model CCR 2000 4.5 hp Snowblower.
1021.Turf Choice Tow Behind Fertilizer Sprayer.
1022.(3) Shelving Units with Contents.
1023.98" x 54" Dump Trailer, 36" Side Height, 51" Tongue Length.
1024.Metal Framed table, Approx. 8' L.
1025.Outdoor Maintenance Items, Shovels, Rakes, and More.Note: Weed Whip Not Included.
1026.Assorted Gas Powered Tools for Repair.
1027.Snap On 2000 psi Pressure Washer.
1028.Group of Office Furniture.
1029.(2) Small Parts Racks. 36" x 36" x 55".
1030.Small Parts Cart with Contents of Assorted Leveling Pads, Brackets, Air Manifolds and More. 36" x 32" x 51" overall.
1031.Large Group of Cabinets and Shelves.
1032.Custom Hydraulic Test Bench. 44" x 30" x 72".
1033.Rietsche Type VCEH/AH 100 Vacuum Pump with 80-Gallon Storage Tank. 5 hp, 208-230/460 volt, 3-phase, 74" x 22" x 42".
1034.Group of Folding Chairs with Storage Cart.
1035.Custom Built Machine. 96" x 48" x 74".
1036.Busch Model Mink MM 1202 AV Vacuum Pump, 220/460 volt, 3-phase.
1037.Echo Model PB-580T Back Pack Type Blower.
1038.T&S Equipment Co. Model LM CAT Forklift Jib Attachment. 7-1/2" x 2-1/2" Fork Pockets, 7' Collapsed Length.
1039.Assorted Wood Stock.
1040.Portable Cantilever Stock Rack. 42" Arm Length, 63" x 72" x 64" H Overall. (Stock NOT Included)
1041.(2) 32" Dia. Terracotta Clay Pots, 25" Overall Height.
1042.(19) Assorted File Cabinets.
1043.Custom Machine Brackets and parts
1044.(7) Assorted file Cabinets.
1045.Pallet w/ Large Assortment of Pneumatic High Pressure Drop Cords From 1/2" ID up to 1-1/2" ID.
1046.(7) Assorted file Cabinets.
1047.Rolling Workstation w/ Drilled and Tapped 42"x24" Fixture Top, (5) Drawers and Internal Power, Overall: 42"x24"x35".
1048.Gast Model 0822-V103-G271X Vacuum Pump Powered By Doerr 115V. 1/2HP Electric Motor.
1049.Custom Flexlink Conveyor System, Missing Motor but Includes Grove Gear 10:1 Ratio Right Angle Gear Box, Also Includes (3) 80/20 2-1/2" x 2-1/2" Extrusin, Overall: 94" Overall 94" Length, and 2" Wide Belt.
1050.(6) 42" Dia. Plastic Planters, Overall Height: 12-1/2". * (2) Not Shown But Same Type and Similar Condition.
1051.(16) Heavy Duty Wood Pallets, Mostly Approx. 35"x35"x8".
1052.Assorted Buss Bar and Buss Bar Components, Enclosures, Shutoffs, and More Electrical Shown.
1053.Large Assortment of Office Cleaning Supplies Shown.
1054.3 Step Rolling Safety Stair, 32" Height to Top Stair, Overall: 18"x24"x55".
1055.Moveable Wall Dividers Consisting of (6) 72" Stands, and (4) 48" Wall Panels.
1056.45" A-Frame Step Ladder.
1057.Canon Image Runner 2525 Copy Machine, (3) Tray Paper Selection, Overall: 23"x26"x44".
1058.Assorted Metal Frame Office Desks, (1) 6 Drawer 60"x29-1/2"x29", (1) Rolling 3 Drawer 48"x30"x30", (1) L-Shaped 60"x36"x30" w/ 45-1/2"x20" L.
1059.2 Door Cabinet with Contents Including Sockets, Rachet, Stamp Set, Punch Tools and More, Overall: Approx. 36"x24"x34",
1060.R.B. Annis Demagnetizer, 6"x14" Passthrough Enclosure, 240V. 22 Amps, Mounted to Cart.
1061.Custom Machine Base with 48" x 48" x 1" Blanchard Grounf Top Plate. 36" Table Height, Assorted Magnetic and Electrical Components.
1062.Assorted Office Technology.
1063.36" x 24" x 86" Cabinet.
1064.Vacuum with Attachments.
1065.Custom Pumping System. 1-phase Motor.
1066.Crate of Air Hoses.
1067.(3) Coils of 3/4" Steel Banding.
1068.Crate of White Boards.
1069.Crate of Assorted Machine Rollers.
1070.Assorted Metal Saw Horses and Machine Bases.
1071.(4) Bags of Ice Melt.
1072.(3) Buckets of Ice Melt.
1073.Assorted Mill Parts Including: Power Draw Bar, Table Feed, Servos, Scales and More.
1074.Assorted Office Technology.
1075.Metro NSF Cart, 60" x 24" x 58". (Contents NOT Included)
1076.Assorted Office Technology
1077.Uline Wire cart. 48" x 24" x 29". (Contents NOT Included)
1078.Assorted Office Technology.
1079.Assorted Office Technology.
1080.Assorted Office Technology
1081.Wire Cart. 36" x 24" x 30"
1082.Assorted Office Technology. (Note: APC Battery Back Up Removed From This Lot)
1083.Assorted Office Tech Components Including Monito Stands, Keyboards, Fax Machine, Server Components, Assorted Cables and More. Cart Not Included.
1084.Heavy Duty 5 Shelf Cart, Overall: 62"x34-1/2"x71". * Contents Not Included, Last Day Removal Only.
1085.2 Door Cabinet, Overall: 48"x18"x78", Contents Not Included.
1086.Intermetro 4 Shelf NSF Rolling Wire Rack, Overall: 60"x24"x59". *Contents Not Included.
1087.Rolling Solvent Rag Canister, Overall: 18"Dia. X 30" Height.
1088.Contents of Office Furnture Including (3) Metal Frame Workstations and (1) 2 Drawer File Cabinet, (ncludes (2) 60"x30"x29" 5 Drawer Office Desks, * Furniture Only.
1089.Kenmore Combination Fridge/Freezer with Icemaker/Water Dispenser In Door, Overall: 36"x32"x68".
1090.Large Assortment of New Printer Cartridges, Types Shown In Photos.
1091.APC Model AR3100 Server Enclosure Cabinet, (42)3 Pin Mounting Prackets w/ APC Metered Rack PDU, Overall: 24"x42"x87".
1092.Office Technology Items Including (5) APC Model RS1000 UPS's (3) Cordless Combination Keyboard/Mouses, Lenovo 520 Thinkstation Computer Tower Cleared and Set Up w/ Windows 10 Pro, 240GB Hard Drive, Lenovo Combination Monitor/Tower Factory Reset w/ Intel Corei7 Pro 450 GB Hard Drive and Windows 10 Operating System. Contents Only Cart Not Included.
1093.Assorted Hold Down Hardware w/ Custom Caddy's and More Shown.
1094.Uline Wire cart. 48" x 24" x 29". (Contents NOT Included)
1095.Wire cart. 48" x 24" x 29". (Contents NOT Included)
1096.Uline Wire cart. 48" x 24" x 29". (Contents NOT Included)
1097.Assorted Office Technology.
1098.Outdoor Picnic Table.
1099.Metro 60" x 24" x 67" Wire rack. (Contents NOT Included)
1100.Outdoor Picnic Table.
1100.1.Metal Framed Table with Contents. 40" x 27" x 33".
1101.Uline Wire Cart.
1102.(2) 42" x 63" x 30" Break Room Tables.
1103.(2) 42" x 63" x 30" Break Room Tables.
1104.(2) 42" x 63" x 30" Break Room Tables.
1105.(1) 42" x 63" x 30" Break Room Table.
1106.(1) 42" x 63" x 30" Break Room Table.
1107.(2) 42" x 63" x 30" Break Room Tables.
1108.(2) Pizza Ovens and (1) Microwave.
1109.(6) Microwaves.
1110.Bridgeport Model 2J Vertical Milling Machine. 9" x 42" Table, 22" Longitudinal Table Travel, 11" Cross Table Travel, 15" Vertical Knee Adjustment, 5" Quill Travel, Variable Spindle Speeds: 60 to 4200 rpm, R-8 Spindle Taper, Kurt Power Draw Bar, One Shot Lube, Servo Power Longitudinal Feed, Work Lights, Acu-Rite "Millvision" DRO, 1-1/2 hp Motor, s/n: 111603, 54" x 65" x 83" and 2300 lbs.
TK Rigging will load this Item for $150.
Building 2 (Next Door)
1111.2 Door Shop Cabinet, Overall: 48"x18"x78", Contents Not Included.
Building 2 (Next Door)
1112.Granite Surface Plate w/ Stand, Granite Measures: 36"x24"x6", Double Sided Lip 2-1/2" Thickness, Overall: 36" Height.
Building 2 (Next Door)
1114.28 Drawer Parts Organizer w/ Contents of Mainly HSS Endmills From .100 Up to 1" Dia. And More Shown, Drawer Unt Measures: 34"x12"x14-1/2".
Building 2 (Next Door)
1115.Huot #13000 3 Drawer Fractional Drill Index w/ Contents of Drills, 1/16" to 1/2" x 1/64ths, Overall: 14-3/4"x7-1/2"x8".
Building 2 (Next Door)
1116.(2) Sections of Teardrop Type Pallet Racking. (4) 10' x 36" Uprights, (8) 10' L Crossmembers and Wire Decking.
Building 2 (Next Door)
1117.Crate w/ Assorted Office Artwork.
1118.(3) Sections of Cafeteria Seating. 42"x 61" x 30" Overall.
Building 2 (Next Door)
1119.2 Door Shop Cabinet w/ Key, Overall: 36"x24"x78".
Building 2 (Next Door)
1120.Wilton Model 3575T Horizontal Bandsaw, (4) Blade Speeds from 60 to 210 sfm, 3/4" Blade Width, Angle Vise, Stock Stop, Coolant, Hydraulic Downfeed, 3/4 hp, Single Phase Motor and Controls, s/n: 601048, 59" x 24" x 48" and 200 lbs.
Building 2 (Next Door)
1121.Electrified Cubicle Set Up Consisting of (9) Independent Work Stations, (8) Stations Measure 103"x96" I.D Each, w/ (2) Hanging Overhead Cabinets w/ Underside Lighting, U-Shaped Desk Surround w/ (2) Underside Storage Cabinets, Chairs, 63" Height Panel Walls, Faux Plants Included. Overall Footprint: 545"x200".
1122.Inspection Items Including Aerospace Model G903277, 24" Height Gage w/ Digital Read Indicator, .001 Graduation w/ Intrepid .0005 Dial Indicator and (2) Mag Bases.
Building 2 (Next Door)
1123.(2) Sections of Pallet Racking. (3) 11' x 40" Uprights, (8) 12' L Crossmembers, Wire Decking.
Building 2 (Next Door)
1124.Custom Dividing Wall Partitions w/ Stands. Mostly Aluminum Frames as Shown.
Building 2 (Next Door)
1125.Workbench w/ 4-1/2" Wilton Swivel Base Bench Vise and Pipe Jaws, Table Measures: 72"x36"x34", * Clamps Shown NOT Included.
Building 2 (Next Door)
1126.Granite Surface Plate, Overall: 24"x12"x4". * Edges Have Chips as Shown.
Building 2 (Next Door)
1127.2 Door Shop Cabinet, Overall: 48"x18"x78", Contents Not Included, Last Day Removal Only.
Building 2 (Next Door)
1128.Assortment of Hole Saws and Arbors From 16MM Up to 5".
Building 2 (Next Door)
1129.2 Door Rolling Shop Cabinet, Overall: 29"x22"x60".
Building 2 (Next Door)
1130.Sharp Model 1440V Gap type Engine lathe. 14" x 40" Rated Capacity, 22" Swing in gap, 9" Gap Length, 9" Swing Over Cross Slide, 1-3/8" Hole Thru Spindle, 2200 rpm, Inch/Metric Threading, 8" 3-Jaw Chuck, 4-Way Tool Post, Hardways, Acu-rite 2-Axis DRO, s/n: 23608 ( New in 1999), 72" x 28" x 63" and 3500 lbs.
TK Rigging will load this Item for $150.
Building 2 (Next Door)
1131.36" x 28" x 84" Stock Rack with Assorted Stock.
Building 2 (Next Door)
1132.Delta Model 31-340 1" Belt/ 8" Disc Sander on Stand. s/n: P9826, 1-phase.
Building 2 (Next Door)
1133.ELKI Model LC-XB5500 Projector w/ Dry Erase/WhiteBoard w/ Pull Down Projector Screen.
1134.2 Door Rolling Shop Cabinet, Overall: 29"x22"x60".
Building 2 (Next Door)
1135.Huot #13025 5 Drawer Wire Guage Drill Index Cabinet w/ Contents of Drills, Dia. From .0400 Up to .2280, Overall: 14-3/4"x7-1/2"x8".
Building 2 (Next Door)
1136.Hardinge Sjogren no. 5C Speed Collet Chuck. 5/8" Cam Lock Mount. ( Fits lot 1130 )
Building 2 (Next Door)
1137.Famco #3 Arbor Press. 8" Throat, 1-1/2" x 1-1/2" Ram, 12" Max Under Ram, 2-1/2" x 3" Knockout in bed. 14" x 19" x 40".
Building 2 (Next Door)
1138.(2) Sections of Pallet Racking. (3) 11' x 40" Uprights, (8) 12' L Crossmembers, Wire Decking.
Building 2 (Next Door)
1139.2 Door Rolling Shop Cabinet, Lockable w/ Keys, Overall: 36"x24"x66".
Building 2 (Next Door)
1140.Delta Cat. No. 52-611 6" Belt, 12" Disc Sander, 26" x 24" x 56", s/n: 98K86194, 1-phase.
Building 2 (Next Door)
1141.Heinnrich 35V 3" Speed Vise.
Building 2 (Next Door)
1142.Kurt D60 Precision Machine Vise w/ Handle.
Building 2 (Next Door)
1143.Bridgeport Right Angle Milling Attachment.
Building 2 (Next Door)
1144.Bison No. 4344-8/4 8" 4-Jaw Chuck. 5/8" Cam Lock Mount. ( Fits Lot 1130 )
Building 2 (Next Door)
1145.Tooling Including Reduced Shank Drills From 17/32" Up tp 1-7/16" Dia. Extended Length Reamer Drills, and More. * Located On Shelf Bring Container For Removal.
Building 2 (Next Door)
1146.Assorted R8 Tooling Including: Albrecht 0-3/8" Keyless Chuck, Jacobs No. 34 Chuck, 1" Endmill Holder, Shell mill and Assorted Cutting Attachments.
Building 2 (Next Door)
1147.Assorted Abrasives Including Scuff Pads, Belts, 1" Roll Material, and More. * Contents Located on Shelf Bring Container For Removal.
Building 2 (Next Door)
1148.(6) Anti-Fatigue mats.
Building 2 (Next Door)
1149.Assorted 5C Collets up to 7/8" and Misc. lathe tooling.
Building 2 (Next Door)
1150.Bridgeport Model 2J Vertical Milling Machine. 9" x 42" Table, 22" Longitudinal Table Travel, 11" Cross Table Travel, 15" Vertical Knee Adjustment, 5" Quill Travel, Variable Spindle Speeds: 60 to 4200 rpm, R-8 Spindle Taper, Kurt Power Draw Bar, One Shot Lube, Servo Power Longitudinal Feed, Work Lights, Acu-Rite "Millvision" DRO, 1-1/2 hp Motor, s/n: 177092, 54" x 65" x 83" and 2300 lbs.
TK Rigging will load this Item for $150.
Building 2 (Next Door)
1151.Custom Rolling Multi Compartment Workstation, Overall: 72"x29-1/2"x64", Not Including Wood Side Shelves.
Building 2 (Next Door)
1152.2 Door Rolling Shop Cabinet, Overall: 29"x22"x60".
Building 2 (Next Door)
1153.2 Roor Rolling Shop Cabinet, Lockable w/ Keys, Overall: 36"x24"x66".
Building 2 (Next Door)
1154.Palmgren 4" Vise.
Building 2 (Next Door)
1155.Huot #13050 Letter Drill Index Cabinet w/ Drills Shown, Overall: 14-3/4"x7-1/2"x8".
Building 2 (Next Door)
1156.Flex Air Adjustable Pneumatic Tapper. 42" Max reach, (9) Tap Holders, 29" x 48" Steel top Workbench, Casters, 56" x 32" x 72" and 200 lbs. (Note: Arbor press NOT Included)
Building 2 (Next Door)
1157.(1) Section of medium Duty Racking. 101" x 96" x 26" Overall.
Building 2 (Next Door)
1158.Famco No. 4R Arbor Press, 11-1/2" Throat, 2" x 2" Ram, 20" Max Under Ram, 5" x 6" Knockout in Bed. 16" x 28" x 42".
Building 2 (Next Door)
1159.Adjustable Boring Head on R8 Shank.
Building 2 (Next Door)
1160.Baldor Cat. No. 712E 1/2 hp Double End Grinder. 3600 rpm, 115 Volt, 6" Wheel Capacity.
Building 2 (Next Door)
1161.2 Door Rolling Shop Cabinet, Overall: 29"x22"x60".
Building 2 (Next Door)
1162.72" x 36" x 34" Metal Framed Bench.
Building 2 (Next Door)
1163.16" x 16" Wesco Table with Pump Jack and 16" Roller Stand.
Building 2 (Next Door)
1164.Metal Frame Workbench w/ Wilton 4" Swivel Base Bullet Vise w/ Aluminum Jaws, Table Measures: 96"x34"x36-1/2".
Building 2 (Next Door)
1165.Clark Model C25CL LP Powered Lift truck. 4800 lb Rated capacity, 189" Max lift, Solid tires, 42" x 4" Forks, 82" Closed Mast Height, Tilt, Sideshift, s/n: C232L-0686-9790-KF, 4269 hrs Shown.
1166.2 Door Rolling Shop Cabinet, Overall: 29"x22"x60".
Building 2 (Next Door)
1167.36" x 18" x 78" 2-Door Cabinet.
Building 2 (Next Door)
1168.60" x 29" x 36" Shop Bench with Wilton 4-1/2" Vise.
Building 2 (Next Door)
1169.(7) Aloris BX Size Quick Change Holders. (2) BXA 16, (1) BXA 1, (1) BX 1, (1) BXA 2 and (1) BXA 7
Building 2 (Next Door)
1170.Powermatic Model 87 Vertical Band Saw. 20" Throat, 12" Max Under Blade Guides, 24" x 24" Tilting Table, Variable Blade Speeds: 37 to 4500 fpm, Blade Welder with Grinder, Worklight, s/n: 98-7585 (New in 1998), 38" x 44" x 77" and 600 lbs.
TK Rigging will load this Item for $100.
Building 2 (Next Door)
1171.Dake no. 001 Arbor Press. 1" Ram, 3-1/2" Throat.
Building 2 (Next Door)
1172.Assorted Hold Down Hardware, 4-Sided Tool Post, Jacobs no. 36 Drill Chuck and More.
Building 2 (Next Door)
1173.Kurt D60 Precision Machine Vise w/ Speed Handle.
Building 2 (Next Door)
1174.Rolling 2 Door Mobile Workstation w/ Wilton 3-1/2" Benchtop Swivel Vise w/ Pipe Jaws.
Building 2 (Next Door)
1176.2 Door Rolling Shop Cabinet, Overall: 29"x22"x60".
Building 2 (Next Door)
1177.(3) Sections of Teardrop Type Pallet racking. (4) 14' x 41" Uprights, (12) 96" L Crossmembers, Wire Decking.
Building 2 (Next Door)
1178.Metal Frame Workbench w/ Wilton 4-1/2" Swivel Base Bench Vise w/ Pipe Jaws, Overall Table Measures: 96"x34"x35".
Building 2 (Next Door)
1179.Pair of 8" x 5" x 6" Angle Plate.
Building 2 (Next Door)
1180.Klutch 17" Drill Press. 60-2400 rpm, 14"x 14" Table, 17-23/32" Swing, #2mt Spindle, 1" Drilling Capacity, 6" Spindle Travel, 1-1/2 hp, 120 volt, s/n: 160315079.
Building 2 (Next Door)
1181.Workbench w/ Wilton 4" Swivel Type Bullet Vise, Bench Measures: 60"x31"x36".
Building 2 (Next Door)
1182.(2) Sets of of SPI 1-2-3 Blocks and a 6" Parallel Set.
Building 2 (Next Door)
1183.(2) Stackable Crates w/ Contents of Hardware and Curtains For Room Dividers.
Building 2 (Next Door)
1184.Workplace Systems Butcher Block Top Work Station. Electrification, Overhead lighting, Casters, 72" x 38" x 85" Overall.
Building 2 (Next Door)
1185.Pneumatech Model AD-400 Non-Cycling Refrigerated Air Dryer. 400 SCFM Rated Capacity, 150 PSIG Max Pressure, 2 hp Compressor Motor, R-22 Refrigerant Type, 460 volt, 3-phase, s/n: TR131515SP-ST and 40" x 32" x 45" overall.
Building 2 (Next Door)
1186.36" x 18" x 78" 2-Door Cabinet.
Building 2 (Next Door)
1187.Double Sided Metal Frame Hardware Cart w/ Dozens of Removable Trays w/ Hardware Including: Metric and Standard Bolts, SHCS's, Washers, Nuts, and More, Cart Measures: 44"x21"x61".
Building 2 (Next Door)
1188.Double Sided Metal Frame Hardware Cart w/ Dozens of Removable Trays w/ Hardware Including: Nuts, Bolts, Dowel Pins, FHCS's, BHCS's, Washers, and More, Cart Measures: 44"x21"x61".
Building 2 (Next Door)
1189.Greenlee No. 7306 Knockout Punch Driver Set w/ Punches and Dies From 1/2" Up to 2".
Building 2 (Next Door)
1190.Contents of Executive Office Including Large Laminate Top U Shaped Desk , Includes: (1) 74"x35"x69" Desk w/ Overhead Shelviing and Underside Lighting, Hidden Power back w/ Underside Drawers, (1) 73"x33-1/4"x69" Desk w/ Overhead Shelving and Underside Lighting and 93-1/2" L-Shaped Peninsula Outcropping, Chairs, (1) 60"x 19"x30" Credenza, and Assorted Office Artwork Shown.
1191.Double Sided Metal Frame Hardware Cart w/ Dozens of Removable Akro Bin Type Containers w/ Contents of Assorted Hardware Including: Shoulder Bolts From 3/16 x 3/4 Up to 3/4 x 1-1/2, Retaining Rings From SH50 Up to SH350, Oilite Washers From 1/4" x ID x 1/16" Up to 1-1/2"x 1/8" Oilite Bearing Sleaves From 1/8x3/16 Up to 1"x1-1/8", Overall Cart Measures: 36"x21"x62-1/2".
Building 2 (Next Door)
1192.Craftsman Tool Box w/ Tools.
Building 2 (Next Door)
1193.36" x 24" x 78" 2-Door Cabinet.
Building 2 (Next Door)
1194.Craftsman 5.5 hp Shop Vac.
Building 2 (Next Door)
1195.Double Sided Metal Frame Hardware Cart w/ Dozens of Removable Akro Bin Type Containers w/ Contents of Assorted Hardware Including: 80/20 Hardware Including Nuts, Flanged BH Screws, Brackets, Plates, Pressure Plates, and More, Overall Cart Measures: 36"x21"x62-1/2".
Building 2 (Next Door)
1196.(2) Sections of teardrop Type pallet Racking. (3) 14' x 42" Uprights, (8) 96" L Crossmembers and Wire Decking.
Building 2 (Next Door)
1197.Workplace Systems Butcher Block Top Work Station. Electrification, Overhead lighting, Casters, 72" x 38" x 85" Overall.
Building 2 (Next Door)
1198.Double Sided Metal Frame Hardware Cart w/ Dozens of Removable Akro Bin Type Containers w/ Contents of Assorted Hardware Including: Spring Pins, E- Rings, LH Nuts, 10/24 Screws, Grade 8 Bolts, Harding Adaptors, Fine Thread Screws, SHCS's, BHCS's, FHCS's From 1/4-20 Up to 5/8-11, Lock Collars, Grease Fittings, and More. Overall Cart Measures: 36"x21"x62-1/2".
Building 2 (Next Door)
1199.(1) Section of Pallet Racking. (2) 96" x 27" Uprights, (6) 96" L Crossmembers, Wire Decking.
Building 2 (Next Door)
1200.Gardner Denver Model EBHOJA 50 hp Screw Type Air Compressor. 100 Max PSIG, 230 volt, 3-phase, s/n: M64861, Approx. 48" x 79" x 50" Overall.
TK Rigging will load this Item for $100
Building 2 (Next Door)
1201.Rolling 2 Door Mobile Workstation w/ Larin 4" Benchtop Swivel Vise.
Building 2 (Next Door)
1202.72" x 36" x 34" Metal Framed Bench.
Building 2 (Next Door)
1203.(2) Sections of Teardrop Style Pallet Racking. (4) 10' x 36" Uprights, (6) 12' and (4) 10' Crossmembers, Wire Decking.
Building 2 (Next Door)
1204.48" x 24" x 78" 2-Door Cabinet.
1205.Huot Reamer Index Cabinet w/ Contents of Reamers Shown, Overall: 26"x12"x9-1/4".
Building 2 (Next Door)
1206.(3) Sections of Pallet Racking, (4) 8' x 27" Uprights, (18) 8' Crossmembers, Wire Decking.
Building 2 (Next Door)
1207.Contents of Office Including Metal Framed U-Shaped Desk w/ Credenza, Includes: (1) Desk w/ Overhead Storage w/ (3) Underside Drawer Units Measures: 72"x30"x65", Desk Measures: 72"x30"x29", (1) 72"x52" Lshaped Corner, (1) 42"x18"x29" Credenza. * Contents On Desk Not Included.
1208.Office Suite including: 123" x 103" Footprint Desk, 42" x 18" x 30" 2-Door Cabinet, (2) Chairs, Framed Print.
1209.(1) Section of Teardrop Type Pallet racking. (2) 10' x 36" Uprights, (4) 104" l Crossmembers and Wire Decking.
Building 2 (Next Door)
1210.Pneumatech Model AD-250 Refrigerated Air Dryer. 250 SCFM Rated Capacity, R-22 Refrigerant Type, 460 volt, 3-phase, s/n: 9905-T131413P-ST, Approx. 33" x 24" x 33". (Needs Repair)
Building 2 (Next Door)
1211.Contents of Office Including Metal Framed U-Shaped Desk w/ Credenza, Includes: (1) Desk w/ Overhead Storage w/ (2) Underside Drawer Units Measures: 72"x30"x65", Desk Measures: 72"x30"x29", (1) 72"x52" Lshaped Corner, (1) 42"x18"x29" Credenza.
1212.Hewlett Packard Laserjet 8100N, 24" x 22" x 40" Overall.
1213.HP designjet T2500 Color Large format Printer. 56" x 33" x 40".
1214.HP Enterprise M750 Color Laserjet Printer.
1215.HP Laserjet 8100.
1216.Conference Room Furniture w/ Wall Fixtures and Artwork. Contents Include: 108"x48"x30" Laminate Covered Conference Table w/ (9) Upholstered Rolling Office Arm Chairs, (2) 53"x19"x30" 3 Door Credenzas, Enclosed Whiteboard w/ Wood Doors, Overall: 72"x48", and (2) 33"x43" Framed Prints. * Sunburst Metal Artwork Not Included.
1217.Office Furniture Including: 66" x 36" x 29" table, (5) Chairs and Small Table.
1218.Office Suite Including: 118" x 134" Desk, Chairs, (3) Framed prints.
1219.(7) Sections of Teardrop Style Pallet Racking. (8) 12' x 42" Uprights, (12) 8' Crossmembers, (16) 11-1/2" Crossmembers, Wire Decking.
Building 2 (Next Door)
1220.Office Suite Including: 93" x 85" x 69" Desk, 74" x 30" x 30" Credenza, Small Table, (4) Framed prints, Flexispot Work Table.
1221.Cannon Model Image Runner 2270 Multi Function Copy Machine w/ 2 Drawer Selection, Overall: 23"x27-1/2"x44".
1222.Craftsman Rally 2 Drawer Tool Box w/ Tools Shown.
Building 2 (Next Door)
1223.Hewlett Packard Model Laserjet 8100N Printer w/ 3 Drawer Selection, Overall: 25"x21"x40".
1224.2 Door Shop Cabinet, Overall: 36"x18"x72".
Building 2 (Next Door)
1225.Metro 3 Shelf Cart w/ Assorted Office Supplies, Overall: 39"x27"x33".
1226.Electrified Cubicle Set Up Consisting of (8) Individual 90"x99" I.D. Cubes, 63" Height Partitions, Each Cube Mostly Includes (2) Overhead Storage Units w/ Underside Lighting, (2) Underdesk Drawer Units, and L-Shaped Desk w/ 90"x36" Desk, w/ 60"x30" L, Additional Parts and Partitions Shown In Photos Included.
1227.Custom 57"x31" Metal Wall Art.
1228.Office Suite Including: 118" x 102" Desk, 42" x 18" x 53" cabinet, (2) Framed prints, (2) Office Chairs.
1229.Office Suite Including: 118" x 102" Desk, 42" x 18" x 53" cabinet, (2) 4-Drawer File Cabinets, Chair, (2) Framed Prints.
1230.Custom Manufactured Metal Wall Artwork, Overall: 83"x40".
1231.Contents of Office including: 72" x 42" x 29" table, (4) Chairs and (3) Framed Prints.
1232.Olympus C-5060 Wide Zoom Camera with Case.
1233.Assorted Tech Tools, Fasteners.
1234.Helicoil Thread Repair Kits Including Miniature Thread Repair Set, and Master Thread Repair Set, and (4) More Shown.
Building 2 (Next Door)
1235.24 Drawer Organizer w/ Contents of Dowel Pins, Taps and Dies, and More, Unit Measures: 34"x12"x14-1/2".
Building 2 (Next Door)
1236.Assorted Office tech.
1237.Various Clamps Inclding Kant Twist Clamps, and C-Clamps.
Building 2 (Next Door)
1238.APC Server Rack With Following Components: Watch Guard XTM3 Series, Cisco Network and Blank Modules, IBM System X3650 M4, APC Symmetra LX, 24" x 42" x 87". (This Unit is connected and In Service. Buyer Responsible to Perform Proper Disconnection of All Utilities)
1239.(3) LCD Monitors, (2) 24" Dell (1) As is and (1) 21" Lenovo.
1240.118" x 72" x 29" L-Shaped Desk. (Contents NOT Included)
1241.44" Dia. Sunburst Custom Brass and Copper Constructed Wall Decor Piece.
1244.2 Door Shop Cabinet w/ Key, Overall: 36"x24"x78".
Building 2 (Next Door)
1245.Huot Fractional Single End and Double End Endmill Index Cabinet, Dividers From 1/8" Up to 1" Organizer, Overall: 26"x12"x9-1/2"m * Includes Keys.
Building 2 (Next Door)
1248.(2) Dyna Brade Type Pneumatic Files.
Building 2 (Next Door)
1249.(2) Reel Craft Model L4545 123 3A Electric Cord Reels, 120 Volt.
1250.(2) Daniel Woodhead Company Model 997 120 Volt Cord Reels.
1251.(3) Daniel Woodhead Company Model 997 120 Volt Cord Reels.
1252.(3) Daniel Woodhead Company Model 997 120 Volt Cord Reels.
1253.(2) Reel Craft Model A5825 OLP Pneumatic Hose Reels.
1254.(2) Coxwells Model SH-N-35 Pneumatic Hose Reels.
1255.Reel Craft Model A5825 OLP Pneumatic Hose Reel.
1256.(2) Coxwells Model SH-N-35 Pneumatic Hose Reels.
1257.(3) Reel Craft Model A5825 OLP Pneumatic Hose Reels.
Building 2 (Next Door)
1259.(3) Reel Craft Model A5825 OLP Pneumatic Hose Reels.
Building 2 (Next Door)
1260.(6) Reel Craft Model A5825 OLP Pneumatic Hose Reels.
Building 2 (Next Door)
1261.(3) Daniel Woodhead Company Model 997 120 Volt Cord Reels.
Building 2 (Next Door)
1262.(6) Reel Craft Model A5825 OLP Pneumatic Hose Reels.
Building 2 (Next Door)
1263.(6) Daniel Woodhead Company Model 997 120 Volt Cord Reels.
Building 2 (Next Door)