Hoff Online Auctions
Ely HIgh School Machine & Fab Shop - Closing June 16, 2020 Starting at 10:00am CT

Item Description
1.Bridgeport Model 1J Vertical Milling Machine, 9" x 42" Tee-Slotted Table, 24-1/2" Longitudinal Table Travel, 12" Cross Table Travel, 16" Vertical Knee Travel, R-8 Spindle Taper, Belted Spindle Speeds: 80 to 2,720, One Shot Lube, Sony Model LF200 2-Axis Digital Readout, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. 213303, Weight 2,200 LBS, Approx. 59" x 52" x 78" High.

Note: Table will be removed from machine to facilitate removal from the school. This will be done at no charge to buyer. Buyer responsible for re-assembly.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $325.00.

2.6" Benchtop Vise, w/ Approx. 9" Workholding Cap.
3.Anvil, 4-1/2" x 2-1/2" Horn, 9" x 3-1/4" Anvil Area, Hardy Hole, Approx. 14"x6-1/2"x7-1/4".
3.1.Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. All Items are Sold AS IS/Where IS and with All Faults. Please Carefully Inspect Items Before Bidding. Click on this lot for more information.
3.2.Please click on this lot for Preview Times at the Ely High School Online Auction.
3.3.Major Machines will be Removed by Docks on Wheels.
Removal by Appointment ONLY on June 22nd & 23rd
Contact Bob at 218-235-7602 to Schedule
3.4.UPS Shipping Available for small items Click here for more information.
3.5.This auction features EXTENDED BIDDING! View this lot to learn more.
3.6.This auction STARTS TO CLOSE at 10:00 AM Central Time at a rate of 2 lots per minute. Click this lot to learn more.
3.7.How much time is left?
3.8.Checkout for Small Hand Carried Items will be from 10:00 - 3:00 on Thursday June 18th, Friday June 19th and Saturday June 20th.

Checkout for Major Machines will be by Docks on Wheels:
Monday & Tuesday June 22nd & 23rd BY APPOINTMENT ONLY. Contact Bob at 218-235-7602 to Schedule.

4.Pexto Hand Operated Rotary Crimper, Bench Model, Assorted Rolls, Model NA.
5.Pexto Model 1001 Hand Operated Apron Brake, 72" x 22 Gauge Rated Capacity, Serial No. N.A., Weight 2,200 LBS, Approx. 90" x 26" x 48" High.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $80.

6.Enco 12" Dia. Rotary Positioning Table, Horizontal and Vertical Mounts.
7.Yuasa Model 550-030 Dividing Head w/ Plate and Tailstock, 4" To Center. * Tailstock Shown In Last Photos.
8.Brown & Sharpe 30" x 20" x 5-1/2" Cast Iron Inspection Plate.
9.(2) Jacobs 18N Drill Chucks on MT#3 Shanks, 1/8" to 3/4" Cap.
10.Hipromac Model 1340 Removable Gap Engine Lathe, 13" Swing Over Ways, 7-1/2" Swing Over Cross Slide, 19-1/2" Swing in Gap, 6-1/2" Gap Length, 40" Maximum Between Centers, Inch / Metric Threading, 1-3/8" Hole Thru Spindle, (8) Spindle Speeds: 105 to 2,000 RPM, Taper Attachment, Longitudinal Position Stop, Steady Rest, 6-1/2" 3-Jaw Chuck, 7-1/2" 4-Jaw Chuck, 10" Face Plate, Rear Chip Guard, Hardways, Coolant Tank and Pump, 220 Volt, 3 Phase 3-HP Motor & Controls, Serial No. 4819, Weight 2,000 LBS, Approx. 72" x 34" x 48" High.

Click Lot for Video.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

11.King Portable Brinells Hardness Tester, 0-3000KG. Measurement.
12.Lufkin 47" Pattern Ruler.
13.Aloris Type A-Series Quick Change Tool Post w/ (3) Tool Holders Including A7, A3, and A5, *Missing T-Nut and Post.
14.Kurt D60 Precision Machine Vise. *No Handle.
15.Pexto Model 381-B Hand Operated Slip Roll, Bench Model, 36" x 22 Gauge Rated Capacity, Serial No. 9-35, Weight 260 LBS, 40" x 18" x 12" High
16.R.K. Wilson Model 37 GM H-Frame Hydraulic Shop Press, 60 Ton Rated Capacity, 45" Between Uprights, 48" Maximum Under Ram, Hand Hydraulic Pump, Rolling Shield, Serial No. 2675, Weight 600 LBS, Approx. 67" x 16" x 87" High.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $100.

17.Themac Type V30 Tool Post Grinder w/ Case, 12000 Max RPM's at Full Load Speed.
18.Beverly No. SS3 Benchmount 4" Shear, *Needs Blade.
19.(5) Sets of Oxy-Acetylene Regulators.
20.LeBlond Model 15 Regal Engine Lathe, 15" Swing Over Ways, 11" Swing Over Cross Slide, 48" Maximum Between Centers, 1-1/4" Hole Thru Spindle, Inch Threading, (8) Spindle Speeds: 25 to 500 RPM, Taper Attachment, Rocker Arm Tool Post, Dog Plate, 6" 3-Jaw Chuck, Chip Pan, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. C8193, Weight 2,500 LBS, Approx. 84" x 33" x 54" High.

Click Lot for Video.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

21.6" Machine Vise Swivel Plate.
22.(26) Dead Centers, Mostly #3 Taper.
23.Assorted Oil Cans.
24.(10) Strong Arm Adjustable Lathe Drive Dogs, (4) Size 4, (2) Size 3, (4) Size 2.
25.Pexto Model 137-G Foot Operated Shear, 36" x 16 Gauge Rated Capacity, 24" Universal Back Gauge, (2) Sheet Supports, Foot Tread, Serial No. 1-47, Weight 825 LBS, Approx. 48" x 76" x 47" High.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $50.

26.Wilton 6" Machine Vise.
27.(15) 5C Collets, Dia. From 9/32" Up to 1-1/8".
28.Assorted HSS Reamers, Mostly #3 MT Shank, Dia. From 1/2" Up to 1".
29.Assorted HSS Reamers, Straight and MT Shanks.
30.LeBlond Model 13 Regal Engine Lathe, 13" Swing Over Ways, 8" Swing Over Cross Slide, 30" Maximum Between Centers, 1-1/4" Hole Thru Spindle, Inch Threading, (8) Spindle Speeds: 25 to 500 RPM, Rocker Arm Tool Post, Dog Plate, 6" 3-Jaw Chuck, 8" 4-Jaw Chuck, Collet Tube, Chip Pan, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. B6681, Note: Feed Needs Repair, Weight 1,800 LBS, Approx. 55" x 27" x 53" High

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

31.(28) Assorted Milling Cutters From 2-1/2" Up to 6" Dia., Arbor Dia. Up to 1-1/4".
32.(13) Lathe Drive Dogs, Hole Dia. From 1/2" Up to 2".
33.Natural Gas Forge Melting Pot, 5" Dia. X 4" Deep Melting Pot.
34.96"x36"x33" Shop Table, Contents Not Included, 1/8" Thick Steel Top.
35.Pexto Model PX-24 Hand Operated Box & Pan Brake, bench Model, 24" x 16 Gauge Rated Capacity, Manual Backgauge, Serial No. 7-60, Weight 300 LBS, 34" x 28" x 12" High.
36.Assorted Hammer Heads and More.
37.DoAll Model DH-618 Surface Grinder, Hand Feed Machine, 6" x 18" Rated Capacity, 21" Longitudinal Table Travel, 7-1/2" Cross Table Travel, 10" Vertical Adjustment of Spindle, 8" Maximum Under Spindle, 8" x 1/2" Maximum Wheel Size, 6"x18" Hanchett Magna-Lock Electro-Magnetic Chuck, Coolant Tank and Pump, Pope Precision Spindle, 220 Volt, 3 Phase, 1-HP Motor, Serial No. 292-70110, Weight 2,200 LBS, Approx. 56" x 36" x 68" High.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

38.Machine Vise Swivel Plate, 7" Distance Between Vise Mount Holes.
39.Reed No. 104 4" Benchtop Vise.
40.Southbend Model CL145B Engine Lathe, 13" x 30" Center Rated Capacity, 8" Swing Over Cross Slide, 8 Spindle Speeds: 40 to 940, 1-9/8" Hole Thru Spindle, Will Cut 48 Threads" 4 to 224 per Inch, 8-1/2" 3-Jaw Chuck, 10" Face Plate, Dog Plate, Taper Attachment, Tail Stock, Rocker Arm Tool Post, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. 16036T, Weight 1,600 LBS. Approx. 70" x 24" x 50".

Click Lot for Video.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

41.Lyon 8 Shelf Stepped MT Drill Index Cabinet w/ Contents of Misc. MT Drills and Reamers, Cabinet Measures: 34-1/2" x 36" x 24".
42.(2) 8 Drawer Small Parts Cabinets w/ Contents of Assorted Hardware, Each Measures : 15" x 25" x 52-1/2".
43.(9) Buffing Wheels, Dia. From 8" Up to 10".
44.American Edelstaal Model 1284X 4 Jaw 8" Dia. Chuck, 2" Dia. Through Hole, Approx. 3-1/2" Dia. Thread On Type Mount.
45.Pexto Model 620-F Hand Operated Deep Throat Rotary Crimper, Bench Model, 24" x 24 Gauge Rated Capacity, Serial No. 5/54, Weight 60 LBS, Approx. 30" x 12" x 12" High.
46.(6) Live Centers, Mostly #3 Taper Shank.
47.Tepco Air Filtration Unit, Overall: 42"x38"x21", 120V. * Item Suspended From Ceiling In Photos, Will Be Lowered To Ground Level Prior to Auction Close.
48.6" Machine Vise w/ Handle.
49.Assorted Machine Handles and More.
50.Southbend Model CL-8187A Engine Lathe, 14-1/2" x 48" Rated Capacity, 8-1/2" Swing Over Cross Slide, 8 Spindle Speeds: 30 to 875, 1-3/8" Hole Thru Spindle, Will Cut 48 Threads: 4 to 224 per Inch, 6" 4-Jaw Chuck, Dog Plate, Taper Attachment, Steady Rest and Follow Rest, Rocker Arm Tool post, 1-1/2"-HP Motor & Controls, Serial No. 14641RKL16, Weight 2,500 LBS, Approx. 63" x 28" x 52" High.

Click Lot for Video.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

51.(11) Lathe Drive Dogs, Hole Dia. From 1" Up to 1-3/4".
52.6-1/2" Machine Vise.
53.Wilton Model A58 18 VS, Variable Speed Belted Drill Press, 400 Up to 5000 RPM's, 7-1/2" Throat, 7" Quill Travel, 18"x14" Adjustable Height Table, Powered By 1 HP 220/440V. 3PH. Motor.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $25.

54.Assorted Dead Centers, Mainly #3 Taper.
55.Edward Throatless Lever Hand Operated Alligator Shear, 6" Blade Length(Blades Missing), Weight 350 LBS, Approx. 32" x 10" x 16" High.
56.Assorted Rocker Arm Tool Holders.
57.Custom Built Heavy Duty Wood Workbench, Overall: 94"x34"x29". Contents Not Included.
58.Powermatic Burke Model 333 Plain Horizontal Milling Machine, Series PMT, 8" x 36" Tee-Slotted Table, 23" Longitudinal Table Travel, 8" Cross Table Travel, 15" Vertical Knee Travel, Variable Spindle Speeds: 50 to 3,150 RPM, #40 Spindle Taper, Coolant, Outboard Support Arbors, 220 Volt, 3 Phase 3-HP Motor & Controls, Serial No. 80101, Note: Variable Speed and Longitudinal Feed Need Repair. Weight 2,800 LBS, Approx. 53" x 54" x 60" High.

Note: Table will be removed from machine to facilitate removal from the school. This will be done at no charge to buyer. Buyer responsible for re-assembly.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $325.00.

59.(16) 5C Collets, Dia. From 5/32" Up to 1".
60.LeBlond Model 15 Regal Engine Lathe, 15" Swing Over Ways, 11" Swing Over Cross Slide, 48" Maximum Between Centers, 1-1/4" Hole Thru Spindle, Inch Threading, (8) Spindle Speeds: 25 to 500 RPM, Rocker Arm Tool Post, Dog Plate, 8" 4-Jaw Chuck, 6" 3-Jaw Chuck, Chip Pan, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. D8195, Weight 2,500 LBS, Approx. 84" x 33" x 54" High.

Click Lot for Video.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

61.Sioux Cat. No. 2050 Double End Pedestal Grinder, 9" Wheel Dia, 3/4" Dia. Arbor, 120V.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $25.

62.(13) Mostly Adjustable Strong Arm Lathe Drive Dogs, Dia. From 1/2" Up to 2".
63.Dividing Head w/ Extra Plates, 9-1/2" Dia. Chuck w/ 1-1/2" Through Hole, 4-3/4" Dia. Plates.
64.Assorted Reamers, Dia. From 1" Up to 2-1/2".
65.Bridgeport Model 1J Vertical Milling Machine, 9" x 42" Tee-Slotted Table, 24-1/2" Longitudinal Table Travel, 12" Cross Table Travel, 16" Vertical Knee Travel, R-8 Spindle Taper, Belted Spindle Speeds: 80 to 2,720, Bridgeport Longitudinal Power Feed, Sony Model LF200 2-Axis Digital Readout, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. 48629, Weight 2,200 LBS, Approx. 59" x 52" x 78" High.

Note: Table will be removed from machine to facilitate removal from the school. This will be done at no charge to buyer. Buyer responsible for re-assembly.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $325.00.

66.Pexto Model 63-F Hand Operated Adjustable Bar Folder, 30" x 22 Gauge Rated Capacity, Bench Model, Serial No. 9/35, Weight 260 LBS, Approx. 36" x 18" x 12" High.
67.Buck Model 5933 9" Dia. 3 Jaw Chuck, 2" Dia. Through Hole, Approx. 3-1/2" Dia. Thread On Type Mount.
68.SCMI Minimax T/40 Spindle Shaper, 10" x 34" Working Surface, 4-Belted Speeds: 1700-9000 rpm, On Cart, 230 Volt, 3 Phase 5-HP Motor & Controls, Serial No. KK1045410, Approx. 38"x24"x49" and 300 lbs.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $50.

69.Large Assortment of Square Shank Cutting Tools.
70.Southbend Model 3442N Engine Lathe, 14-1/2" x 48" Rated Capacity, 8-1/2" Swing Over Cross Slide, 8 Spindle Speeds: 30 to 875, 1-3/8" Hole Thru Spindle, Will Cut 48 Threads: 4 to 224 per Inch, 6" 4-Jaw Chuck, 5" 3-Jaw Chuck, Collet Closer, Rocker Arm Tool post, Tail Stock , 220 Volt, 3 Phase 1-1/2"-HP Motor & Controls, Serial No. 155342, Note: Feed Needs Repair. Weight 2,500 LBS, Approx. 63" x 28" x 52" High.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

71.Assorted MT Adaptors.
72.Beverly No. B1 4" Bench Mount Shear.
73.(4) Oxy-Acetylene Torch Heads w/ Replacement Tips.
74.(2) Jacobs 14N Drill Chucks, 0-1/2" Cap., (1) MT#3 Shank, (1) MT#4 Shank.
75.DiAcro Model 24 Hand Operated Box & Pan Brake, Bench Model, 24" x 16 Gauge Rated Capacity, Set of Fingers, Serial No. FC6387, Weight 300 LBS, Approx. 30" x 18" x 12" High.
76.Machine Vise Swivel Plate, 7" Distance Between Vise Mount Holes.
77.Misc. Tooling Including Spanner Wrenches, and Large Assortment of Square Wrenches.
78.7" Machine Vise.
79.Assortment of Lathe Drive Dogs, Dia. From 1-1/2" Up to 5".
80.LeBlond Model 13 Regal Engine Lathe, 13" Swing Over Ways, 8" Swing Over Cross Slide, 30" Maximum Between Centers, 1-1/4" Hole Thru Spindle, Inch Threading, (8) Spindle Speeds: 25 to 500 RPM, Rocker Arm Tool Post, Collet Closer with Assorted Collets, 6" 4-Jaw Chuck, Dog Plate, Chip Pan, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. B6882, Weight 1,800 LBS, Approx. 55" x 27" x 53" High.

Click Lot for Video.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

81.Assorted Wrenches.
82.Assorted Strong Arm Lathe Tool Holders.
83.Metal Work Table w/ Lower Shelf, Overall: 47" x 35" x 34", Contents Not Included.
84.Brown & Sharpe 24"x18"x4-3/4" Cast Iron Inspection Plate.
85.Emco Model Compac 5 CNC Turning Center, Bench Model, 5-1/2" x 12" Rated Capacity, Variable Spindle Speeds: 600 to 4,000 RPM, .63 Hole Thru Spindle, Vertical Milling & Drilling Attachments with Collets (Collet Nut Missing), Emco CNC Controls, 3-Station Servo Driven Turret(Wires Need to be Re-Connected), Quick Change Tool Post with Tool Holders, Tail Stock, 3" 3-Jaw Chuck, Face Plate, Safety Shields, Instructors Manual, (6) Student Manuals, 115 Volt Motor & Controls, On Rolling Cabinet, Serial No. 8502049, Approx. 32"x38"x29" High, Cabinet Approx. 39"x24"x29".

Click Lot for Video.

86.6" Machine Vise.
87.Assortment of Strong Arm Adjustable Lathe Drive Dogs.
88.Miller Model LMSW-52 Portable Spot Welder On Stand, 12" Throat, 3-1/4" Gap, 220V. 50% Duty Cycle, 58000 Secondary Amps, Overall: 7"x30"x45".
89.Dead Center Tailstock For Dividing Head, 6" Distance From Base to Center.
90.Southbend Model CL145B Engine Lathe, 13" x 30" Center Rated Capacity, 8" Swing Over Cross Slide, 8 Spindle Speeds: 40 to 940, 1-9/8" Hole Thru Spindle, Will Cut 48 Threads" 4 to 224 per Inch, 6-1/2" 3-Jaw Chuck, Dog Plate, Collet Tube, Steady Rest and Follower, Tail Stock, Rocker Arm Tool Post, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. 16038T, Note: Feed Needs Repair, Weight 1,600 LBS. Approx. 70" x 24" x 50".

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

91.Rockwell 10" Dia. 4 Jaw Chuck, 2-1/2" Dia. Through Hole, Approx. 3-1/2" Dia. Thread On Type Mount.
92.Assorted Strong Arm Lathe Tool Holders.
93.(5) Oxy-Acetylene Torch Heads w/ Replacement Tips.
94.(9) Strong Arm Adjustable Lathe Drive Dogs, Sizes 2-4, Mainly #3.
95.DiAcro Model 24 Hand Operated Slip Roll, 24" x 20 Gauge Rated Capacity, Bench Model, Serial No. GH4501, Note: Missing Roll Clamp, Weight 200 LBS, Approx. 30" x 18" x 12" High.
96.Pexto Hand Operated Rotary Crimper, Bench Model, Incomplete, Model NA.
97.Assorted Milling Cutters, Dia. From 2-1/2" Up to 5", 1" Dia. Arbor Hole.
98.(3) Keyless Drill Chucks On MT#2 Shanks.
99.(2) Jacobs 14N Drill Chucks, 0-1/2" Cap., On MT#3 Shank.
100.Southbend Model CL145B Engine Lathe, 13" x 30" Center Rated Capacity, 8" Swing Over Cross Slide, 8 Spindle Speeds: 40 to 940, 1-9/8" Hole Thru Spindle, Will Cut 48 Threads" 4 to 224 per Inch, 6-3/4" 3-Jaw Chuck, Collet Tube, Tail Stock, Rocker Arm Tool Post, 220 Volt, 3 Phase 1-HP Motor & Controls, Serial No. 16037T, Weight 1,600 LBS. Approx. 70" x 24" x 50".

Click Lot for Video.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $200.

101.Speedy-Melt Model MP471 Forging Furnace, BTU: 300m, Natural Gas Fired, Pass Through Openings: 9"x6-1/2", Top Opening: 10", Also Includes Assorted Forging Tooling, Crucibles and More, Approx. 32"x40"x38".

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $30.

102.Ellis Model 1800 Mitre Horizontal Band Saw, 11" x 14" Rated Capacity, 9" Round at 45 Degrees, 1" Blade Width, 3 Blade Speeds: 70-135-250 FPM, Hydraulic Downfeed, Quick Adjusting Vise, 16" x 60" Roller Conveyor, Includes New Blades, 220 Volt, 3 Phase 1-HP Single Phase Motor & Controls, Serial No. 181410381, Saw is New, Weight 600 LBS, Approx. 64" x 29" x 48" High.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $40.

103.Technical System, Inc.  Model 100 Hydraulic  Simulator, Also comes with pneumatic systems.
104.Millermatic 10 MIG Welder has .030 Wire, is Operational, comes with Tweco Gun, Flow Meter, Controller Feede, 230 volts.
105.Thern Machine Co. 1000 lb. Capacity Cable Hoist, Distance Between Uprights Approx. 68", Expands to Height of 10', On Casters.

Removal of this machine will be by Docks On Wheels. Removal Dates are by Appointment Only on June 22nd & 23rd. Contact Bob at 218-235-7602 to Schedule. Cost for Removal will be $50 .