Hoff Online Auctions
Klugwerx - November 2018 November 2018 - Starting at 10:00am CST

Item Description
1.Bridgeport Model 2J Vertical Milling Machine. 9"x42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 13" Vertical Knee Adjustment, 5" Quill Travel, Variable Spindle Speeds: 60 to 4,200 RPM, R8 Spindle Taper, Sony 2-Axis DRO, Power Longitudinal Feed (Needs Repair), One-Shot Lube, 1 1/2 HP 230/460 Volt 3-Phase Motor and Controls, s/n: 141816. Approx 60"x 60"x 84" and 2,500 lbs.
Click on Lot for Machine Video

Winona Welding & Sandblasting has inspected this item and has Quoted $100 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

2.Kennedy 5-Drawer Cabinet. 10-1/2" x 13-1/2" x 11".
3.Jacobs No. 20N Drill Chuck on #4 MT Shank. 3/8" to 1" Capacity.
3.1.Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.
3.2.Please click on this lot for Preview Times at the Klugwerx Online Auction.
3.3.Please click on this lot for Rigging Information at the Klugwerx Online Auction.
3.4.UPS Shipping Available for small items Click here for more information.
3.5.This auction features EXTENDED BIDDING! View this lot to learn more.
3.6.This auction STARTS TO CLOSE at 10:00 AM Central Time at a rate of 4 lots per minute. Click this lot to learn more.
3.7.How much time is left?
3.8.Click on This Lot For Important Removal Information at the Klugwerx Online Auction.
4.(15) Solid Carbide Endmills, Sizes up to 5/8" x 4".
5.(20) R8 Collets, Sizes up to 3/4".
6.Huot No. 13350 Fractional Endmill Cabinet full of Endmills, Many Solid Carbide, 14-3/4" x 7-1/2" x 7-3/4" Overall.
7.Trustone 24" x 18" x 4" Grade A Granite Surface Plate.
8.Moore Cat no. 1230-P Precise 10-7/8" Rotary Table with Index Plate and Wood Case, 4-1/2" Center Height (Horizontal), 14-1/16" Center Height (Vertical), 3/8" T-Slots, +/- 6 (seconds) Tolerances, 0.000050" Table Top Flatness, s/n: LRT 2296.
9.Kurt D60 Precision Machine Vise on Swivel Plate.
10.Lincoln Electric Model 215XT Power MIG Welder. 215 amps, 22 volts @ 30% Duty Cycle, 170 amps, 24 volts @ 60% Duty Cycle, 30-250 amp range, s/n: K27001 11521, Approx. 22" x 40" x 32" Overall. (Tank NOT Included)
11.Jacobs Spindle Nose Lathe Chuck, w/ (13) Collets From 1/4" Up to 1-1/4" Holding Cap For Tools, Thread Mount: 3-1/2".
12.Famco Model 5-C Arbor Press. 2"x 2" Ram, 10-1/2" throat, 4-3/4" x 5" Knockout in Bed, Adjustable bed Height, s/n: MB000148, Approx. 17" x 30" x 75" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $25 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

13.Tru-Stone Grade B 36" x 24" x 4" Granite Surface Plate on Metal Stand. 36" x 24" x 36" Overall.
14.Arbor Press, 5-1/2" Throat, 8-1/2" Ram.
15.Clark Model C12A Hardness Tester w/ 8" Throat. 0-4" Cap.
16.Ingersoll Rand Size D Pneumatic Chain hoist on 3-Ton Chain Block. (Buyer Responsible for Removal)
17.(2) Sets of Gage Blocks, (1) .05 Up to 4" Mostly Complete, Block Grade AS-1.
18.Niagara Model 3A 30" Finger Brake, Overall: 42"x12"x12".
19.Delta Model C23-115A 6" Double End Pedestal Grinder. 1/2 hp, 220 volt, 21" x 23" x 48" Overall.
20.SPMM Co. 6" Belt Sander with Belt Feed. 6" Feed Belt Width, 3 hp, 1725 rpm, 230 volt, 3-Phase, 27" x 42" x 68" Overall.
21.(12) Packs of Sumitomo CPGM320.5 Inserts.
22.9" x 5-1/2" x 5-1/2" V-Block.
23.Pair of 8"x 12" x 10" Angle Plates.
24.Assorted V-Blocks with Clamps. Sizes from 1-1/4" x 1-1/2" x 1-1/4" up to 4-3/16" x 3-1/4" x 2-3/4".
25.Bock Model TV4 Twin Vise, 4" Holding Cap. Interlocking Grooves compatible w/ Lots 45 and 56.
26.Assorted Hand Tools, Wrenches, Drivers and More.
27.Heavy Duty Drill Press Table. 40" x 24" table Area with 1/2" Drilled and Tapped Holes, 30" Table height. 45" x 30" x 30" Overall. (Angle Plates NOT Included)
28.(2) Jacobs No. 16N Drill Chucks on #3MT Shanks. 1/8-5/8" Capacity.
29.Do-All No. 4-161 Master Square with Wood Case.
30.Precision Detroit Company Model PDC-3A Powered Index Table, 30" Diameter, 5-1/2" Table Height, 3/4 hp, 1750 rpm, 230/460 volt, 3-Phase, Mounted on 36" x 36" x 24" Steel Table, s/n: 31538.

Winona Welding & Sandblasting has inspected this item and has Quoted $25 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

31.(2) Stackable 5-Drawer Cabinets, Approx. 41" x 28" x 15" Each.
32.Yuasa Model 595-008 Rotary Positioner. 8-1/2" Dia. Face, Vertical and Horizontal Mount, s/n: HG-9714.
33.Carr Lane MFG .251 to .500 Plug Gage Set with Metal Case. (Incomplete)
34.(2) Sets of Granite Parallels. (1) Do-All Grade M, 6", .000015 Accuracy and (1) A. Ottavino Corp 12".
35.Olympia No. 621 20" Height Gage with Wood Case.
36.Metal Work Bench, 40" x 24" x 61-1/2" Overall.
37.Jacobs No. 18N Drill Chuck on 1" Straight Shank, 1/8" to 3/4" Capacity.
38.Assorted Carbide Inserts Including: SNC43DR10, SNG434T0820.
39.Group of Assorted Carbide Inserts as Shown.
40.Pexto Model #137 Shear, 36" Capacity, 16" Manual Back gage, 46" x 46" x 41" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $35 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

41.(54) Solid Carbide Endmills, Dia. From 3/8" Up to 5/8", Flute Length From 3/4" Ballnose Up to 2-1/2" four flute.
42.(7) Assorted Cat 40 Taper Tool Holders Including: Kennametal CV40EM075375, Command C4J4-0033 with Albrecht Keyless Chuck and More.
43.Pair of Do-All 3"x 3"x 3" Granite V-Blocks, Master Grade, Class 1, .000050" Accuracy and Do-All 3-1/2" x 2" x 1" granite Dressing Plate.
44.Large Assortment of Dies and Taps. Dies From 6-32NC Up to 3/4-16NF.
45.Bock Model TV4 Twin Vise, 4" Holding Cap. Interlocking Grooves compatible w/ Lot 56.
46.(10) Solid Carbide Endmills. Diameters up to 1" and Lengths up to 5-3/8".
47.(2) Cast Iron Surface Plates. (1) 14" x 10-1/4" x 2-1/4" with 1/4" Drilled and Tapped Holes, (1) 11-5/8" x 12"x 2-3/4".
48.(2) Portable Refractometers, (1) Valenite Model PT-795.
49.Group of Assorted Carbide Inserts as Shown.
50.BOS Model BGS-618 Manual Surface Grinder. 6" x 18" Permanent Magnetic Chuck, Coolant Tank, 2 hp, 220/440 volt, 3-Phase, 3430 rpm, s/n: 808, Approx. 65" x 42" x 67" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $50 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

51.J&S Tool Company Fluid Motion Wheel Dresser with Case.
52.(35) Solid Carbide Endmills, Dia. From 3/16" Up to 1/2".
53.Large Lot of Indexable Boring Bars, Endmills and Cutters. Makes/Models Include: Ingersoll 26VV2B1281R02, Acme 220108-100L and Boring Bars up to 1-1/4" x 8".
54.(2) Jacobs No. 18N Drill Chucks. (1) on #3MT Shank and (1) on 1" Straight Shank. 1/8" to 3/4" Capacity.
55.Assorted Hand Tools, Drivers, Snips, Pliers and More.
56.Bock Model TV4 Twin Vise, 4" Holding Cap.
57.(17) Solid Carbide Endmills, Diameters up to 9/16" and Lengths up to 6".
58.Phase II 0-1" to 11-12" Micrometer Set with Standards, Wood Case, Carbide Tipped Anvils. (Incomplete SET)
59.Sears/Craftsman 24" Caliper with Wood Case.
60.Marvel Model 8 Mark II Tilt Frame Vertical Bandsaw, 25-1/2" x 28" Table, 230 volt, 3-Phase, s/n: 828046, Approx. 90" x 48" x 90" Overall.
61.(3) Partial Gage Pin Sets. (1) Vermont .0615-.2505 Plus Set, (1) Model M-O Plus Set, (1) Unknown.
62.Group of Assorted Polishing Stones and More.
63.Carr Lane MFG .501- .625 Plug Gage Set in Metal case. Missing .625"
64..626 to .750 Plug Gage Set with Metal Case.
65.(13) Solid Carbide Endmills, Mostly 5/8" x 3-1/2".
66.Dapra Corp 8" Machine Vise.
67.Carr Lane MFG .061 to .250 Plug Gage Set with Metal Case. (Incomplete)
68.(12) Assorted Collets as Shown. (4) Erickson TG150.
69.Prentiss Bulldog 4-1/2" Benchtop Vise. (Bolted to Bench. Buyer Must Remove)
70.Voest Removable Gap Engine Lathe. 20" Swing Over Bed, 74" Max Between Centers, Taper Attachment, Standard/Metric Threading, 21-1500 rpm, 2-Axis DRO, 1-7/8" Hole Thru Spindle, Steady Rest, #4 MT Tailstock, Removable Chip Tray, (2) Tool Posts, 10" 3-Jaw Chuck, 230 volt, 3-Phase, s/n: 1 037/2, Approx. 126" x 40" x 60" Overall.
Click on Lot for Machine Video

Winona Welding & Sandblasting has inspected this item and has Quoted $200 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

71.DO-All 2-Door Supply Cabinet with Assorted Bandsaw Blades. 31" x 16" x 80" Overall.
72.Manual Lift Table. 40" x 42" Table Area, 35" Table Height.
73.Group of Allen Wrenches.
74.Crate of steel Stock. Sizes up to 42" x 4-3/4" x 2".
75.Assorted Threading Dies with Wood Case.
76.Heavy Duty Shop Made Shelving Unit. 48" x 32"x 89" Overall. 12" Between Shelves. (Contents NOT Included)

Winona Welding & Sandblasting has inspected this item and has Quoted $25 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

77.Group of Assorted Polishing Stones and More.
78.12" Swivel Plate Machine Vise, Overall: 15"x27"x8".
79.Assorted Inserts Including: Carboloy, Newcomer, Iscar, Sandvik and More. p/n's as Shown.
80.Ex-Cell-O Double End Carbide Grinder, 10" Wheel Diameter, 9-1/2" x 8" and 16" x 7" Tables, 230 volt, 3-Phase, 29" x 26" x 48" Overall.
81.Assorted Hand Tools, Central Tool Co. 1/2" Drive Torque Wrench, Wrenches, Easy Outs, Files and More.
82.(5) Assorted Cat 40 Taper Tool Holders Including: Command C4E4-0750 End Mill Holder with Solid Carbide Endmill, (1) Cat40XSLN3/4-3 with Solid Carbide Endmill, (1) Valenite V40CT-E87 with Indexable Endmill and (2) MT Holders.
83.Group of Assorted Carbide Inserts as Shown.
84.16" 4-Jaw Lathe Chuck, Screw on Type, Approx. 3" Hole Thru. (Note: Fits Lot 70)
85.(12) Assorted machinists Clamps, Some Starrett.
86.(9) Assorted Angle Plates, Sizes up to 3-5/8" x 3-1/4" x 4-1/4"
87.Group of Assorted Inserts. Makes Include: Ingersoll, Iscar, Greenleaf, Kennametal and More. P/n's as Shown.
88.(20) R8 Collets, Sizes up to 7/8".
89.Large Group of Assorted Metal Files.
90.Miller Model Maxstar 300DX, 28 volts, 200 amps @ 60% Duty Cycle, 95 Max OCV (1-Phase), 30 volts, 250 amps @ 60% Duty Cycle, 95 Max OCV (3-Phase), Tig Gun, Ground Clamp, Assorted Weld Rod, s/n: LB07548530, " x 39" x 48" Overall
91.Kurt 3800 V Precision Machine Vise w/ Handle.
92.Assorted Inspection Including: Starrett Drive Pin Punches, Center Finder, Telescoping Gages, Small Hole Gages and More.
93.Group of Assorted Inspection, Mostly for Parts or Repair.
94.Large Group of Assorted Metal Files.
96.(2) Partial ER Collet Sets. (1) ER20 (1) ER16.
97.Group of Assorted Inserts, Makes Include: Greenleaf, Sumitomo, Kennametal, Seco and More. p/n's as Shown.
98.Large Group of Assorted Allen Wrenches.
99.(3) Assorted Height Gages. (1) SPI .001" to 24", (1) Starrett No. 254 14" with Federal DB15 Dial Indicator, .001" and (1) Mitutoyo 12" with Brown and Sharpe Bestest .005" Dial Indicator.
100.Gardner Model 618 Hydraulic Surface Grinder, 32" x 6" T-Slotted Table, 18" x 6" and 15" x 10" Permanent Magnetic Chucks, 12" Wheel Capacity, 230 volt, 3-Phase, s/n: 569-20, Approx. 68" x 44" x 70" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $50 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

101.Aloris Type Double Sided Tool Post, (CXA Size) Includes (11) Tool Holders Including Boring Bar, Square Shank Holders, Knurler, and More Shown. * Tool Post Missing Handle.
102.5C Collet Indexer, 2-3/4" To Center.
103.(10) Mostly Kendex 1" Square Shank Insert Type Cutting Tools.
104.PM800 8" Machine Vise w/ Handle.
105.Assortment of R8 Tooling Including (16) Collets From 5/16" Up to 3/4", R8 Collet Tool Holder, and R8 Collet Spinning Tray.
106.5C Collet Indexer, 2-3/4" To Center.
107.Accu-Finish Series 2 Lapping Machine, 6" Dia. Stone, 115V.
108.(18) ER32 Collets From 1/8" Up to 11/16".
109.Adjustable Radius Dresser w/ Diamond Tip, Appears to Be Adjustable Up to 1" Horizontal Travel.
110.AB Arboga Maskiner Type GL 2508 Geared Head Drill Press. 16" x 13" Table, 12" Throat, (8) Speeds from 125 - 3480 RPM, #3 MT Spindle, 220 volt, 3-Phase, s/n: 307307E, Approx. 24" x 30" x 68" Overall.
111.(31) HSS Endmills, Dia. From 7/8" Up to 1-1/2".
112.Kurt D60-1 Precision Machine Vise w/ Handle.
113.(2) Stackable 5-Drawer Cabinets, Approx. 41" x 28" x 15" Each.
114.Large Group of Sockets, Assorted Drive Sizes.
115.Crate of Assorted Steel Drops, Machined Parts and More.
116.6" x 3-1/2" x 2" Sine Plate with 3/16" Drilled and Tapped Holes.
117.(2) Assorted Gages Including; (1) Federal C21, .0001" Dial Bore Gage and (1) Kent Gage with Federal C21 .0001" Dial Indicator.
118.Assorted V-Blocks with Clamps. Sizes from 1-1/2" x 1-1/2" x 5/8" up to 4-3/16" x 2-3/4" x 1-5/8".
120.Clark Model C500 30 LP Powered Forklift, 2575 lb Max Capacity, 189" Max Lift Height, 42"x 4" Forks, 82-1/2" Closed mast Height, Cushion Tires, s/n: 235-111-3857.
Click on Lot for Machine Video
121.(2) Sections of Teardrop Type Pallet Racking Consisting of: (2) 36" x 9' Uprights, (1) 36" x 90" Upright, (22) 8' Crossmembers and Wire Decking. (Contents NOT INCLUDED. Last Day Removal ONLY. NO EXCEPTIONS)
122.Crate Assorted Steel Plate Stock.
123.(5) Starrett No. 436 Micrometers. (1) 2-3", (1) 4-6", (1) 3-4" and (1) 5-6".
124.14" Swivel Plate Machine Vise.
125.Assorted Inspection Including: Mitutoyo No. 2904, .001 to 1.000" Depth Micrometer, NSK 3-4" Micrometer, .0001", Aerospace 0-1" Micrometer, .0001", Mitutoyo and Starrett 0-1" Interchangeable Anvil Micrometers and More.
127.(4) Assorted Sine Bars. (3) 6" L, (1) 11" L.
128.Assorted Bandsaw Blades.
129.(16) Large Dia. Endmills From 1" Up to 2".
130.Leland Gifford Twin Spindle Sliding Head Drill Press. 48" x 25-1/4" Table, 15" Throat, #3 MT Spindles, 150 - 450 rpm ( Gear Drive ), 600 - 1800 rpm ( Direct Drive ), Foot Switch, 230 volt, 3-Phase, s/n: LMS-1990, Approx. 56" x 55" x 93" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $250 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

131.(8) Insert Type Boring Bars, Dia. From 3/4" Up to 1-3/4", Shank Length From 6-1/2" Up to 15".
132.Approx. (150) HSS Endmills, Dia. From 7/16" Up To 1".
133.Suburban Tool Model MC66 FP Magnetic Sine Chuck, 6"x6" Magnetic Chuck Top.
134.(13) Insert Type Cutting Tools.
135.(35) Solid Carbide Endmills, Dia. From 5/16" Up to 5/8".
136.Starrett Digichek 12" Cadillac Style Height gage, .0001" Division.
137.(2) Starrett Micrometers. (1) No. 436 5-6" and (1) 224 6-9".
138.(3) Partial Gage Block Sets. (1) HDC Grade B, (1) Do-All and (1) George Scherr.
139.Assortment of Reduced Shank Drills, Dia. From Approx. 5/8" Up to 1-1/2".
140.Blue M Model 8650D-3 Heat Treat Oven. 10" x 10" x 21" Chamber Size, 460 volt, 1-Phase, s/n: FU2-2112, Approx. 26" x 44" x 58" Overall.
141.(3) Drill Indexes (1) Huot 1/16 to 1/2 by 1/64", (1) Index w/ Center Punches, and (1) Custom Endmill Tray.
142.(15) Cutters Dia. From 2-7/8" Up to 5", Arbor Hole Mostly 1-1/2". Dia.
143.Shars 60" Vernier Caliper.
144.(4) Drill Indexes Including (1) Huot A-Z Index, and (3) More Shown.
145.Hundreds of Small Dia. Endmills and Drills, Dia. From Approx. 1/32" Up to 7/32".
146.Metal Frame Wood Top Work Bench w/ Cat 50 Taper Tool Holder Holder, Overall: 59"x36"x33", * Blueprint Cabinet Not Included.
147.Large Assortment of Misc. Punch/Stamping Tooling Including Shapes, Names, Logos, Numbers, and More Shown.
148.Assortment of Tap and Die Tooling Including Approx. (100) Taps From 2-56 NC Up To 5/8-11HSGT, and (14) Thread Rings.
149.Assortment of CNC Lathe Tool Holders and Misc. Holders Shown.
150.Thompson Model C Surface Grinder, 40-1/2" x 12" Electromagnetic Chuck, 14" x 40" Capacity, 16" Max Distance Between Wheel and table, 20" x 3" x 8" Max Wheel Capacity, Wheel Dresser, 15 hp, 3-Phase, s/n: L514237 (1951), Approx. 105" x 82" x 112" Overall and 14,900 lbs.

Winona Welding & Sandblasting has inspected this item and has Quoted $350 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

151.Heavy Duty Steel Cart, 1/8" Steel Top, Overall: 39"x42"x32".
152.Kennedy 3-Drawer Machinists Chest, 20" x 9" x 13".
153.Huot 40 Taper tool Caddy. 12" x 16" x 7".
155.Jacobs No. 20N Super Chuck, 3/8" Up to 1" Cap, On a MT#4 Shank.
156.Bock Model TV6, 6" Interlocking Twin Vise, Groove Pattern Compatible w/ Lot 176.
157.Metal Cart, Overall: 35"x23"x31".
158.(2) Toolmakers Vises, (1) 2-1/2" Holding Cap x 3-1/2", (1) 3" Holding Cap. X 3-1/4".
159.(3) Jacobs Chucks, (1) 14N, 0-1/2" Cap on a MT4 Shank, (1) No, 36, 3/16" To 3/4" Cap. On A MT#4 Shank, and (1) 6A, 0-1/2" Cap. On a #2MT Shank In a #3 MT Adapter.
160.Hurco Model VM2 Vertical Machining Center. 46" x 18" T-Slotted Table with 43-1/2" x 18" x 1-1/2" Tooling Plate, 40" X-Axis, 18" Y-Axis, 18" Z-Axis, Cat 40 Spindle Taper, 8000 rpm Spindle, 20 hp Spindle Motor, 1200 lb Max Table Load, 16-Position ATC, 230 volt, 3-Phase, s/n: VM2-06006053AE and Approx. 96" x 96" x 100" Overall and Approx. 9000 lbs. (Note: Tool Changer Needs Repair)

Winona Welding & Sandblasting has inspected this item and has Quoted $300 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

161.Hundreds of Assorted HSS Drills, Reamers, Endmills, and More Shown.
162.Custom Built Compound Sine Vise w/ Tapped 12"x6" Plates.
163.Harig Mfg. Model Grindall No. 1 Grinding Fixture w/ V-Block Mounted to a Metal Plate, 3" To Center Height.
164.Metal Stock Rack With Contents of Assorted Steel Drops, 34" x 54" x 88" Rack Size.
165.Kennedy 7-Drawer Machinists Chest, 20" x 9" x 13".
166.Heavy Duty Metal Rack with Assorted C-Clamps and Chain. 23" x 48" x 72" rack Size.
167.Assorted Angle Plates, Sizes up to 6" x 8" x 6-1/2".
168.Kennedy 2-Drawer Riser, 28" x 10" x 7-1/2".
169.Banding Cart with Tensioner, Crimper, Snips, Clips. 5/8" Steel banding.
170.Custom made 3-Roll Powered Roll. 4-1/2" x 37" Roll Size, 1-Phase, 46" x 16" x 18" Overall.
171.(2) Cat 40 Shell Mill Type Tool Holders, (1) Command C4S5-1000 w/ Kennametal MCF-45 3-1/2" Dia Shell Mill Model KSSR300SE45C4, and (1) Unknown w/ Ingersoll Max-I-Cut Model 6K2B03R01 57429, 3-1/4" Dia. Shell Mill.
172.(3) Cat 40 Quick Change Tapping Head Tool Holders w/ (16) Mostly Lyndex and Command Tap Holders, (2) Command C4T4-0001 Tool Holders, (1) Lyndex C4005-0562, Also Includes (2) 3/4" Straight Shank Endmill Quick Release Tapping Holders, Holders from XTC1-0008 Up to XTC1-P125.
173.(12) Cat 40 Endmill Type Tool Holders, Tool Holder Brands Include Command, Lyndex, and More, Dia. From 3/8" Up to 3/4".
174.(3) Cat 40 Tool Holders w/ Jacobs Chucks, (2) Command C4J4-0003 w/ Jacobs 14N Chucks, and (1) Parlec C40-03JT1 w/ Jacobs 14 N Chuck, 0-1/2" Cap. On All Chucks.
175.Command C4T4-0002 Cat 40 Quick Change Tapping Head Tool Holder w/ (6) Quick Change Taps.
176.Bock Model TV6, 6" Interlocking Twin Vise.
177.Kennedy 2-Drawer Riser, 28" x 10" x 7-1/2".
178.Advance Model 360B "Retriever" 24V Floor Sweeper. AS IS
179.(7) Assorted Angle Plates. Sizes up to 5-3/4" x 7" x 10".
180.Pair of Busch Precision 5-1/2" x 7" x 10" Angle Plates.
181.(5) Cat 40 Shell Mill Type Tool Holders, (1) Kennemetal CV40SM075138, 2-1/2" Dia. Shell Mill, (1) Lyndex C4001-1000 w/ 4" Dia Shell Mill, (1) Command C4S4-1500 w/ Carbaloy R220.43-04.00-07, 4" Dia Shell Mill, (1) Command C4S4-1250 w/ Sumitomo SDP54000R, 4" Dia. Shell Mill, and (1) 2" Dia. Shell Mill on Cat 40 Holder.
182.(13) Cat 40 MT Tool Holders, (5) MT #3, (3) MT#3, and (5) MT#4, Also Includes Large Assortment of 40 Taper and 50 Taper Pull Studs.
183.(12) Cat 40 Collet Type Tool Holders, Most Appear To Be ER32 and ER40, Includes Partial Set of ER40 Collet Set Shown.
184.(3) Command Cat 40 Tool Holders w/ Jacobs Chucks, (2) Command C4J4-0003 w/ Jacobs 14N 0-1/2" Cap Chuck, (1) C4E3-0500 w/ Jacobs No. 32, 0-3/8" Cap. Chuck.
185.(12) Cat 40 Collet Type Tool Holders, Mainly ER20 But (2) ER32.
186.(13) Cat 40 Tool Holders Including Endmill Type, Collet Type, MT#3 Type, and a Straight Arbor For Cutting Saws, Most Collet Type Appear ER40.
187.(8) Cat 40 Endmill Type Tool Holders, Dia. From .12 Up to 1", (1) Command C4E4-0375 w/ Specialty Adjustable Brown & Sharpe .0005 Graduation Dial Indicator, (1) Command C4E3-0750 w/ Kennemetal K15R15OSE4453 2" Dia. Insert Type Endmill.
188.(8) Cat 40 Endmill Type Tool Holders, Dia. From 5/8" Up to 1-1/4".
189.(8) Cat 40 Endmill Type Tool Holders, Dia. From 1/4" Up to 5/8", Mostly Command and Maritool Brand.
190.Custom Made Hydraulic H-Frame Press. 42" Between Uprights, 5" Ram Diameter with 37" x 12" Ram Plate, 42" x 14-1/2" Bed, 5 hp, 230/460 volt, 3-Phase, 56" x 43" x 100" Overall.
191.Assortment of Tool Holders Including Cat 40, NMTB 50, Shrink Fit, Cat 40 Types Include Endmill, Shell Mill, and Collet types.
192.Cantilever Type Stock Rack with Assorted Aluminum, Steel Stock. Aluminum Rectangle up to 82" x 8" x 3/4", Steel Hex up to 1-1/2" x 35-1/2" and Assorted Lengths up to 9'.
193.Large Assortment of Drills, Endmills, and More Shown, Sizes From 1/8" Up to 3/4".
194.Assortment of Lathe Tooling Including Mostly Square Shank Insert Type Cutting Tools, Mostly 1" Square Shank, Drive Dog, and More Shown.
196.Dozens of Taps, Sizes From 4-40NC Up to 1/2-14 NPT
197.(4) #4 MT Live Centers, (2) BullNose, and (2) Point End.
198.15" Rotary Cross Slide Positioning Table, T-Slotted Base, 5" table Height.
199.Assortment of Mostly Carbide Endmills, Dia. From 1/16" Up to 1/8".
200.Do-All Model D824-12 Hydraulic Surface Grinder, 6" x 18" Permanent Magnetic Chuck, 8" Cross Table Travel, 24" Longitudinal Table Travel, 11" Max Under Wheel, 12" x 1" Wheel Capacity, Wheel Dresser, 5 hp, 220 volt, 3-Phase, s/n: 222-69281, Approx. 80" x 70" x 70" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $100 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

201.Group of Assorted Fasteners.
202.Enco Adjustable Boring Head w/ 1" Holes Mounted on a 50 Taper Tool Holder.
203.(15) Large Dia. Endmills, Mostly 8 Flute, 2" Roughers, Flute Length From 3-1/2" Up to 10".
204.Assorted Nails and Machine Parts.
205.(3) Tool Makers Vises, (1) 2", (1) 3", and (1) Specialty Shown.
206.(2) Partial ER32 Collet Sets with Cases. (1) Hurco and (1) Bison.
207.(5) Pneumatic Straight Die Grinders w/ Large Assortment of Abrasives.
208.Scherr-Tumico 6" x 6" x 6" Granite Step Block, .000050" Accuracy, Grape 4FP and Rahn Granite Angle Block.
209.Assorted HSS Taps up to 2-3/4" Diameter and Assorted Hole Saws up to 4-1/2" Diameter.
210.Leblond Engine Lathe, 15-1/2" Swing over Bed, 54" Max Between Centers, 1-1/4" Spindle bore, 8" 3-Jaw Chuck, #3 MT Tailstock, Standard Threading, 230 volt, 3-Phase, s/n: 09217, Approx. 94" x 30" x 53" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $100 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

211.Assorted Inspection Including: NSK 6" Dial Caliper, Mitutoyo No. 2904 Depth Gage (Parts or Repair), Aerospace 0-1" Micrometer and 1-2" Micrometer.
212.Assorted Broach Tooling Including: Dumont Minuteman no. 10 Set, (3) Assorted Bushings and 5/8" broach.
213.Assorted Inspection Including: Starrett No. 448 Vernier Depth Gage, Lufkin no. 900 Machinists Planer, Mitutoyo 6" Height Gage and (2) Stands.
214.(5) Multi Bin Storage Cabinets with Contents.
215.Large Assortment of Mold Making Parts Including Die She Springs, Roller Sleaves, and More Shown.
216.Large Group of Center Punches.
217.Group of Assorted Carbide Endmills, Deburring Bits and More.
218.Group of Assorted Tool Bits, Some Carbide Tipped, Sizes up to 3/4" Shank.
219.(3) Adjustable Boring Heads On Straight Shanks, (1) Bridgeport No. 2 w/ 5/8" Holes on 7/8" Straight Shank, (1) T&D Microbore w/ 3/4" Holes on 1" Dia. Straight Shank, and (1) Criterion TABH-250B w/ 1/2" Holes on 3/4" Straight Shank.
220.Wilson/Rockwell Model 40US Hardness Tester, 5-3/4" Throat, 0-4" Cap.
221.Acco Model T6T171C65E One Ton Electric Chain Hoist w/ Pendant Control, 208-230/460 V. 3Ph.
222.6" Machine Vise.
223.Large Group of Assorted Transfer Screws, Punches and More.
224.Assorted Levels, Squares, Scribes and More.
225.(4) Cat 40 Taper Drill Chuck Holders, (3) Unknown, (1) With Jacobs JKP-130-J33 Keyless Chuck.
226.(14) Assorted R8 Collets, Sizes up to 7/8" and (2) R8 Endmill Holders.
227.Troyke 14-1/2" Dia. Rotary Positioner Table.
228.Shop Made Bench with 8" Grinder and Rockwell 3/8" Variable Speed Drill Press. 29" x 30" x 48" Overall.
229.(2) Magnetic Chucks, (1) w/ Power Control, (1) Magna-Lock Corp Model No. HU-618 Measuring 18"x6"x4", (1) Unknown Make Measuring 30"x10"x5", and (1) Do-All Model 100 Selectron 220V. Magnetic Chuck Control.
230.Carlton 4' Arm 11" Column Radial Arm Drill. 51" x 31" Table, 9" Min. to 48" max Column to Spindle Distance, 39" Horizontal Head Travel, 28-1/2" Vertical Head Travel, 12" Spindle Traverse in Head, 2-1/2" Spindle Dia., #4 MT Spindle, 60-1500 rpm, 7 hp, 1750 rpm, 220/440 volt, 3-Phase, s/n: 1A3926, Approx. 99" x 36" x 110" and 6500 lbs.(NEEDS REPAIR)

Winona Welding & Sandblasting has inspected this item and has Quoted $400 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

231.Jacobs 18N Drill Chuck, 1/8" to 3/4" Capacity, on #3MT Shank with Cat 40 Holders.
232.(5) Shell Mill Cutters, (3)4", (2)4-1/2".
233.Large Assortment of Micro Boring Bars, Shank Length Mostly 9/16" and 3/4".
234.(19) Large Dia. Roughing Endmills, 8 Flute, 2" Dia. Flute Length From 2-1/2" Up to 6-1/2".
235.Assorted Power Tools Including: Tradesman 1500 psi Pressure Washer, Ready Heater 70,000 btu Portable Heater and Tool Shop Chop Saw.
236.Nutting Type Cart, Overall: 48"x28" Platform, 14" From Ground to Platform Height.
237.(21) HSS Endmills, Dia. From 3/4" Up to 1-7/8".
238.Yuasa Model 550-605 5C Collet Indexer, 2-3/4" To Center.
239.(2) Electric Motors. (1) Reliance Electric 20 hp, 3520 rpm, 230/460 volt, 3-Phase, 1-5/8" Shaft Dia. And (1) GE 5hp, 208/220/440 volt, 3-Phase, 1-3/8" Shaft Dia.
240.Cincinatti EDM, Sinker Type, 36" x 16" T-Slotted Table with 23-1/2" x 10" Riser Table, 8" 3-Jaw Chuck, 48" x 20" x 19" Tank, Hansvedt Pulse EDM Power Supply, Hansvedt Pulse EDM Power Supply, s/n: 8838, Approx. 77" x 74" x 104".

Winona Welding & Sandblasting has inspected this item and has Quoted $350 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

241.Approx. (40) Mostly No. 5 MT Drills, Dia. From 2" Up to 3-1/4", Flute Length From 4-1/2" Up to 14".
242.Live Center on #4MT Shank.
243.(14) Solid Carbide Endmills, Sizes up to 1" x 6".
244.Solid Carbide Endmills, Cutting Dia. From Approx. 1/2" Up to 7/8".
245.Pallet of Assorted Fasteners.
246.Assorted #3MT Tooling, Live Center and Endmill Holders.
247.(15) Solid Carbide Endmills, Sizes up to 4" x 3/4".
248.(19) Solid Carbide Endmills, Sizes up to 5/8" x 5".
249.Pallet of Assorted Motors up to 5 hp, 230/460 volt, 3-Phase.
250.Do-All Hydraulic Surface Grinder, 30-1/2" x 15-1/2" Modified Table, 230 volt, 3-Phase, s/n: 1-3-4-531, Approx. 54" x 60" x 74".

Winona Welding & Sandblasting has inspected this item and has Quoted $100 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

251.Large Group of Punches.
252.Assorted MT Tooling Including: Jacobs No. 3A Chuck on #2 Shank with 2-3 Adaptor, Jacobs no. 14N on #3MT Shank and Indexable Cutter on #3MT Shank.
253.Manual Die Lift Cart, 24" x 18" Platform, Approx. 42" Max Lift, 24" x 36" x 53" Overall.
254.(2) 3-Phase Transformers. (1) Acme Cat. No. T-3-53342-35, 24" x 19" x 25" and (1) Federal Pacific Cat. No. T4T15E, 480 Primary Voltage, 208Y/120 Secondary Voltage, 18" x 19" x 29".
255.(19) Solid Carbide Endmills, Mostly 3/4" x 4".
256.(32) Solid Carbide Endmills. Sizes up to 6" x 1/2".
257.Shop Made 30" x 14" x 7" Riser table. 1/4" Drilled and Tapped Holes.
258.Cart w/ Large Assortment of Primarily 9/16" Hold Down Hardware, Cart Measures: 36"x24"x32".
259.Dumore Model 8584-210 Tool Post Grinder, Includes Large Assortment of New Grinding Wheels. 3/4 HP, 120V, 16,000 RPM, Overall: 14"x14"x8".
260.Johnson Machine Corp Model NA OBI Punch Press. Mechanical Clutch, 27-1/2" x 14-1/2" x 3" Bed, 45" x 45" x 90" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $300 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

261.(11) 18 Hole Tool Organizers w/ arge Assortment of Mainly HSS Endmills.
262.Briggs & Stratton 1.5 HP 15 Gallon Air Compressor, Overall: 16"x16"x40". 120V.
263.(22) Insert Type Cutting Tools, Mostly 1" Square Shank.
264.(17) 5C Collets and a Collet Closer, Dia. From 1/8" Up to 15/16".
265.(13) 5C Collets and a Collet Closer, From 21/64" Up to 1-1/16".
266.Palmgren Type 6" Speed Vise.
267.(11) Solid Carbide Endmills, Mostly 4" x 3/4".
268.Huot Type 50 Taper Tool Cart, 27" x 18" x 35"
269.(3) Assorted Drill Chucks on 5/8" Shanks, (2) Jacobs No. 34-02, 0-1/2" and (1) Albrecht 1/32" to 1/2".
270.Do-All Model 2013-20 Vertical Bandsaw. 20" Throat, 26" x 26" Table with 14" x 18" Extension, Approx. 12" Max Under Blade Guide, Electronic Variable Speed, Blade Welder, 154" Blade Length, 460 volt, 3-Phase, s/n: 377-81884, Approx. 48" x 60" x 88" Overall.

Winona Welding & Sandblasting has inspected this item and has Quoted $150 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

271.(7) MT#4 Shank Adaptors and Extensions.
272.96" x 30" x 37" Metal Framed Work Bench with 1/4" thick Top Plate. (Contents NOT Included)
273.(34) HSS Endmills, Dia. From 5/8" Up to 2".
274.(30) Square Shank Mostly Insert Type Cutting Tools and Other Lathe Tooling Including (2) Knurlers w/ 9/16" Shank, Cutting Tool Shanks From 1/2" Square Up to 1".
275.Pigeon Hole Cabinet with Contents of Assorted Die Making Components.
276.5 Drawer Blueprint File Cabinet, Previously Used For Tool Storage, Overall: 40"x30"x16".
277.Crate of Assorted Steel Plate Stock.
278.Crate of Assorted Steel Stock.
279.Crate of Assorted Aluminum Plate Stock.
280.(2) Johnson Gas Appliance Co. No. 142-1 Gas Powered Furnaces on Stand. 11" x 6" x 18" Chamber Sizes, 57" x 27" x 64" Overall.
281.Pallet of Assorted Die Sets.
282.(2) Tool Boxes.
283.Standard D-20241-B Dial Bore Gage with Wood Case.
284.Assorted Dividers, Squares and More.
285.Bernard Model 3500SS 3 Gallon Cap. Welding Chiller, 115V, Overall: 13"x21"x17".
286.Manual Die Lift Cart. 30" x 30" Platform, Approx. 60" Max Lift Height, 30" x 60" x 72" Overall.
287.5 Shelf Unit w/ Contents, Overall: 48"x24"x64", * Gas Cylinders Not Included.
288.Magnetic Sine Chuck, Overall: 12"x6"x4".
289.(40) Large Dia. Endmills From 7/8" Up to 1-1/2".
290.Dahlih Model DL-V1600 Heavy Duty Bed Type Vertical Milling Machine with Horizontal Milling Head. 87" x 20" T-Slotted Table, 63" Longitudinal travel, 24" Cross Travel, 28" Headstock Travel, 60-1720 Rpm, Cat 50 Spindle Taper, Anilam 3-Axis DRO, Lube System, 15 hp Vertical Spindle Motor, 7-1/2 Hp Horizontal Spindle Motor, s/n: NA, Approx. 104" x 98" x 120" and 20,000 lbs.
Click on Lot for Machine Video

Winona Welding & Sandblasting has inspected this item and has Quoted $500 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

291.Crate Full of Assorted C-Clamps.
292.Cushman 10" 4-Jaw Lathe Chuck.
293.Hardinge Model 30A-HC 5" Dia. 3 Jaw Chuck w/ 1-1/2" Through Hole.
294.Double Sided Pivoting Box Table, Top Surface Measures: 24-1/4"x20", Side Measures: 24-1/4"x10-1/4".
295.Approx. (100) HSS Endmills, Some Double End, Dia. From Approx. 1/4" Up to 1".
297.Assorted Center Drills, Counter Bores, Endmills, and More Shown.
298.Hundreds of Mostly Carbide Brazed Tip Cutting Tools, Square Shank From 1/4" Up to 1" Square.
299.(50) Larger Dia. HSS Endmills, Dia. From Approx. 5/8" Up to 1-1/2".
300.Southbend Model FSG-6120 Surface Grinder, 6" x 12" Permanent Magnetic Chuck, 13-3/8" Longitudinal Table Travel, 6.75" Cross Table Travel, 11" Max Distance Between Wheel and Table, 7" x 5/8" x 1.25" Wheel Size, Lube System, Coolant Tank and Pump, 1 hp, 3440 rpm, s/n: 01C-5242, Approx. 44" x 42" x 68" Overall and Approx. 800 lbs.

Winona Welding & Sandblasting has inspected this item and has Quoted $75 for a Basic Lift and Load of this Item During Scheduled Checkout Times. Please Contact David at (507) 454-6944 for more information.

301.(8) Cat 50 Endmill Type Tool Holders, Mostly Command and GS. Dia. From Approx. 7/16" Up to 1".
302.(8) Cat 50 Endmill Type Tool Holders, Mostly Command Brand, Sizes From .0875 Up to 1".
303.(8) Command Cat 50 Tool Holders, Endmill Type Sizes From .0625 Up to 1".
304.(7) Cat 50 Shellmill/Facemill Type Tool Holders, w/ (5) Shell Mills, (1) Sandvik Model RA290.90-127R38-15M 5" Dia, (1) 4" Dia. Sumitoma, (1) Straightshank w/ 2" Dia. Cutter, (1) Ingersoll GM6V-04R01 4" Dia. Cutter, and (1) 5" Dia. Cutter.
305.(8) Mostly Command Cat 50 Endmill Type Tool Holders, From 1/2" Up to 1".
306.(9) Cat 50 Tool Holders, (5) Collet Type, and (4) Endmill Type From Approx. 1/2" Up to 1".
307.Assortment of 50 Taper Tool Holders, Mostly NMTB But More Shown, Types Include MT Type, Shell Mill Type, and Endmill Type.
308.(9) Cat 50 Tool Holders Including (4) Endmill Type, (3) Collet Type, (2) Shell Mill Type, Mostly Command Brand.
309.(4) Drill Indexes.
310.(7) Square Shank Insert Type Cutting Tools, Mostly 1-1/4" Square Shank.
311.Pair of 36" x 4" Forks. Slide Rail Mount, 1-1/2" Diameter Slides.
312.Large Assortment of Band Saw Blades, Many Appear New.
313.Aloris Type Double Dided Tool Post, Appears to Be Like CXA Size, Includes (4) Dorian Tool Holders Shown. Overall Tool Post Measures 3"x3"x2-3/4".
314.Pair of 13-3/8" x 13-3/4" x 24" Angle Plates.
315.Pigeon Hole Cabinet with Assorted Fasteners, Machine Parts and More.
316.(9) Mostly Command Cat 50 Endmill Type Tool Holders From 1/2" Up to .875.
317.(9) Mostly Command Cat 50 Endmill Type Tool Holders, From .375 Up to 1".
318.(9) Cat 50 Tool Holders Including Collet Type, Endmill Type, Shell Mill Type, and Tapping Quick Change Type.
319.(9) Mostly Command Cat 50 Tool Holders Including (3) Collet Type, and (6) Endmill Type From Approx. 5/8" Up tp 1".
320.Steel Welding Table w/ 4" Wilton Bullet Vise, Overall Table Measures: 36"x36"x36", w/ 1" Steel Plate Top, (2) Drawers w/ Contents.
321.(8) Command Cat 50 Endmill Type Tool Holders From 1/2" Up to 1".
322.(9) Assorted Cat 50 Tool Holders Including: Shell Mill Type, MT#2 Holders, Jacobs Toolholders, and Lyndex Power Fluid Head.
323.(8) Mostly Command Cat 50 Endmill Type Tool Holders From Approx. 1/2" Up to 1-1/4".
324.(11) NMTB 50 Taper Assorted Tool Holders Including Shell Mill, Endmill, and Collet.
325.(2) Shell Mills on 50 Taper Tool Holders, (1) Cat50 Parlec C50-15SM2 w/ Sumitoma Model WRCS7505R 5" Dia. Shellmill, and (1) 50 Taper Tool Holder w/ 7" Dia. Shell Mill.
326.NMTB 50 Taper Tool Holder w/ 8" Dia. Lightly Used Shell Mill.
327.(4) 50 Taper Tool Holders.
328.Command C6S6-2000 Cat 50 Shell Mill Type w/ 9" Dia. Shell Mill.
329.Assortment of Battery Items Including (2) Chargers Including 24V Lester Electrical Dual Mode Battery Charger, and Schumacher 6-12 V. Battery Tender and (1) Instant Power Model IP-1850FL Battery Jump Box.
330.Double End Pedastal Grinder w/ 10" Dia. Wheels, 230V. 3PH, Overall: 26"x18"x48".
331.Jacobs Chuck Model 18 N, 1/8" Up to 3/4" Cap. On a MT#4 Shank.
332.Metal Shelving Unit, Overall: 39"x25"x64", Contents Not Included.
333.Enco Adjustable Boring Head w/ 1" Holes Mounted on a 50Taper Tool Holder.
334.Large Assortment of Mainly HSS Endmills and Drills, Dia. From Approx. 1/8" Up to 7/8".
335.Pratt Burnerd Model BP80/2306, 3-1/4" Dia. 3 Jaw Chuck Mounted on a 1-1/4" Straight Shank w/ Key.
336.(4) Multi Drawer Storage cabinets with Contents of Assorted Drills, Fasteners, Press Dies and More.
337.(22) ER32 Collets From 3/16" Up to 11/16".
338.Dayton Pedestal Fan. 1/6 hp, 1-Phase.
339.Suburban Tool Model MC-66-S1 Magnetic Chuck Sine Chuck, 6"x6" Mag. Chuck Top.
340.Model L84 Belt Sander with Roller Feed Table, 58"x 21" Table, 4" Belt Width, 72" Belt Length, Dust Collection unit, 1 hp, 115/230 volt, 1-Phase, 78" x 56" x 108" Overall.
341.Dumore Model C6C34FZ18 Tool Post Grinder, 1/2HP, 115/230 V. Single Ph, 1-1/2" Mounting Hole.
343.Large Assortment of New Band Saw Blades, Mainly 3/4" Wide, and (2) Rolls of 2" Wide.
344.(2) C-Clamps.
345.Five Drawer Lateral File Cabinet w/ Custom Inserts for Cat 40 Tool Holders.
346.Cast Iron Surface Plate w/ Cat 40 Tool Presetter. Overall: 22"x16"x3-1/4".
347.Metal Frame Butcher Block Top Work Bench, Overall: 72"x30"x34", * Blueprint File Cabinet Not Included.
348.Assortment of Custom Prybars w/ Wood Stand.
349.Assortment of Pneumatic Tools Including (Ingersoll Rand Ratchet, (1) Dura-Block Cut Off Tool, (3) Chicago Pneumatic Right Angle Die Grinders, and (3) Blowers.
350.Heavy Duty Steel Welding Table On Casters, Includes 5" Swivel/Pivot Vise w/ Pipe Jaws, Table Measures: 48"x30"x36".
351.(6) 120V. Angle Grinders, Mostly 4-1/2" Disc.
352.(4) 120V. Electric Tools Including 2.5 Hp Skilsaw, and (3) Drill Drivers Including (2) Milwaukee.
353.(12) Assorted Hand Tools.
354.Large Assortment of Abrasives Including Sand Paper, Belts, and Grinding Wheels.
355.Large Assortment of Mainly HSS Endmills and Drills, Dia. From 1/8" Up to 3/4".
356.New Interstate Model K11-100 4" Dia. 3 Jaw Chuck, 7/8" Through Hole.
357.Assortment of Mostly Solid Carbide Endmills From 1/8" Up to 3/8".
358.(6) Mostly New Carbide Tipped Endmills, Mostly 1-1/4".
359.5 Drawer Blueprint File Cabinet, Previously Used For Tool Storage, Overall: 40"x30"x16".
360.Assortment of Steel Stamping Letters and Numbers.
361.(5) Kant Twist Clamps and Welding Angle Magnets. (2) Size 2D, (3) Size 420.
362.(17) Quick Change BT Tool Holders Including Collet Type, Endmill Type, and an Albrecht 1/32-1/2" Cap. Keyless Drill Chuck.
363.Assortment of Letter Punches, Mainly 1/2" Tall Characters.
364.(4) Huot Index Containers Including (3) Reamer Indexes, and (1) Number, Letter, and Fractional Index.
365.30" x30" Hydraulic Lift Table w/ Brake, 27" Minimum Up to 36" Height Raised.
366.T&B/ Ansley Cat. No. 779-3200 Blue Macs Bench Press, 13"x8" Table.
367.Granite Surface Plate w/ Custom Built Stand, Plate Measures: 24"x18" w/ 1-3/4" Lip, Overall w/ Stand Measures: 24"x18"x40".
368.Radius Dresser w/ Case.
369.Rockwell/Wilson Model 3YR Hardness Tester, 0-4" Cap, w/ 6" Throat.
370.(4) Sets of Magnetic Parallels, Risers, and V-Blocks, From 3"x2-1/4"x1-7/8" Up to 6-1/4"x3"x2".
371.Walker Model AXM7167-769 Demagnatizer, Overall: 10"x8"x4-1/2", 115V., 100% Duty Cycle.
372.Phase 2 Stock No. 260-1-1 Arbor Press, 4" Throat, 5-1/2" Ram, * Missing Handle.
373.Granite Surface Plate w/ 2" Lip, Overall: 18"x12"x4".
374.Double Sided Box Table w/ (1) Adjustable Side, Flat Side Measures 13"x16", Angled Side Measures 13"x15".
375.Wheel Balancer Unit, Overall: 12"x12"x14".
376.Yuasa Stock No. 553-301 Tail Stock, 6-1/2" to Center.
377.Custom made Humidifier Unit. (2) Pure Handler Model PSDDR-20(0) Units, Intac Control System, 480 volt, 3-Phase, 68" x 37" x 62" Overall.
378.Heavy Duty Mold Makers Bench, 72" x 28" x 34" Overall.
379.Contents of Cabinet Including Large Assortment of Surface Grinder Stones From 6" Dia. Up to 12" Dia, Arbor Hole From 1-1/4" Up to Approx. 3" Dia.
380.(2) Two Door Cabinets, Each Measure 36"x19"x85", *Currently Bolted Together.
381.Pallet w/ Contents Including Pneumatic Cylinders, Torch/Gas Regulators, and More Shown.
382.Assortment of Drills, Endmills, Reamers, Punches, and Assorted Indexing Holders.
383.Assortment of Mainly MT Tooling Including Reamers, Drills, and More.
384.Cart w/ Large Assortment of Mainly 1/2" Hold Down Hardware, Cart Measures: 31"x24"x37".
385.(7) Vise Grip Clamps.
386.(4) Pneumatic Tools w/ Custom Built Trays Including Oilers etc.
387.Gear Puller Kit w/ Case.
388.(2) Keyless Chucks, (1) K.O.Lee 1/2" Cap. On a MT#2 Shank, (1) Albrecht 1/32-1/2" Cap. On 1/2" Straight Shank.
389.Assortment of Reamers Shown.
390.Roller Table Table On Casters w/ Brake, Overall 59"x39"x36", * Contents On Lower Shelf Not Included.
391.Heavy Duty Double Sided Parts Cabinet, 162 Bins per side, Contents of Assorted Tooling Included.
392.Metal Cart w/ Bumpers, Overall Cart Measures: 41"x28"x29". Contents Not Included.
393.Cart w/ Large Assortment of Assorted Hold Down Hardware and More Shown. Overall Cart Measures: 31"x17"x32".
395.Zee Medical Products First Aid Cabinet w/ Contents, Overall Cabinet Measures: 15"x5-1/2"x22-1/2".
396.(2) Oak Drafting Tables, Overall Each Measures: 72"x43-1/2"x37".
397.Shop Cart, Overall: 31"x17"x32", Contents Not Included.
398.Assortment of Abrasives Including Rolac Discs, Grinding Wheels, Steel Wool, and More Shown.
399.Shop Cart, Overall: 31"x17"x32".
400.Heavy Duty Low Profile Steel Rolling Platform Cart, Overall: 29"x32"x7-1/2".
401.18" x 12" Machining Plate, Approx. 3/8" Drilled and Tapped Holes, 20" x 10" Mounting Bolt Pattern (Bolt Centers)
402.10 hp Hydraulic Power Unit, 1740 rpm, 230 volt, 3-phase, 42" x 28" x 62" Overall.
403.Custom Made Humidifier Unit with PS Series Controller.
404.2 Door Rolling Storage Unit w/ Contents, Overall: 36"x24"x34".
405.Large Assortment of MT Adapters and Drift Pins.
406.(3) Jacobs Chucks, (1) No 36 3/16-3/4" Cap On a MT#3 Shank, (1) No. 34 0-1/2" Cap. On a 5/8"x1-1/2" Straight Shank, and (1) 34-06 0-1/2" Cap. Needing Shank Replacement.
407.Thermolyne Model HP-A2235M Hot Plate, 120 V. Plate Measures 12"x12".
408.Large Assortment of Mainly MT#3 and MT#4 Drills.
409.Assortment of Mainly MT # 4 Drills.
410.Make/Model NA Wood Burner. 21" x 28" x 48" Overall.
411.Pair of 12-3/4" x 3-1/2" x 1-3/8" Shop Made Parallels.
412.(5) Assorted Angle Plates. Sizes up to 5" x 5" x 6".
413.(2) Pallets of Graphite Electrodes.
414.Pallet of Plastic Stock Drops.
415.Assortment of Tooling Including Drills, Reamers, Endmills, and More Shown.
416.Metal Frame Sliding Face Work Bench, Overall: 72"x36"x35", Contents Not Included.
417.Rock Island No. 95 4-1/2" Benchtop Vise.
418.Jacobs Platform Scale, 10"x15" Platform, Scale Weights Up to 130 Lbs. *DetectoGram Cast Lid Cracked as Shown In Photos.
419.Zinko Model ZN-12, 12 Ton Bottle Jack.
420.Custom Built Rolling Steel Frame Bench w/ (2) Kalamazoo 14" Chop Saws w/ Foot Pedal Controls, (1) Saw Currently Modified Into 10"dia. X4" Wire Wheel, (1) Kalamazoo w/ 5HP 208-230/460V 3PH, Baldor Motor, (1) Modified w/ 5HP 208-230/460 V. 3PH Leeson Electric Motor. Table Measures 72"x30"x27". * Parts are Included To Bring Back Modified Grinder Into Chop Saw
421.(8) Kant Twist Clamps, (3) Size 3, (3) Size 4-1/2D, and (2) Size 420.