Hoff Online Auctions
May 2017 Machinery Exchange - Thursday, May 4, 2017 Thursday, May 18, 2017- Starting at 10:00am CST

Item Description
2.Tigerstop Automatic Stock Stop and Pusher. 10' Stop Travel, Control, 110 Volt, Approx 144"x15"x4"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

3.New, Ingersoll 3016347 Insert Style Cutter. 10" Diameter, 2 1/2" Bore
Approximate Weight: 27lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
3.1.Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.
3.2.UPS Shipping Available for small items Click here for more information.
3.3.This auction features EXTENDED BIDDING! View this lot to learn more.
3.4.How much time is left?
3.5.This auction STARTS TO CLOSE at 10:00 AM CDT at a rate of 5 lot per minute. Click this lot to learn more.
3.6.Click on this lot to learn more about preview dates and times.
3.7.Click on This Lot For Important Removal Information
4.Acme Catalog No. T-2A-79521-3S 3-Phase Transformer. 45KVA, 600 Volt Primary, 480Y/277 Volt Secondary, 475lbs, Approx 29"x23"x30"
Rack
5.(3) New Insert Cutters, (1) Walter/Waukesha Coolant Thru - No. MJ129-033RR-53RB0103974, (1) Ingersoll No. 25W2X108-1R01-18353-C Ball E.M.
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
6.Milwaukee Cat No. 5362-1 Rotary Hammer. 0-900 RPM, 0-4500 BPM, Assorted Bits, Metal Case
Approximate Weight: 19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
7.Craftsman Model 706.658073 8-Drawer Rolling Tool Chest with Key. Approx 27"x18"x41"
OTHR
8.Variable Speed Drive System Consisting of: Leeson Model C42D17FK2A 1/4HP 1750RPM 90VDC Electric Motor with KB Penta Power Multi-Drive DC Motor Speed Control, 30:1 Ratio Right Angle Gear Box with Sprocket and Chain, 1" Diameter Output Shaft, 110 Volt Supply
SA 4
9.48 1/2"x30"x1 3/4" Aluminum Plate with (1) 2 3/4" diameter Hole. 48 1/2"x24 1/2" Useable Without Hole
Rack
10.Okamoto Model Linear 612 Surface Grinder. Hand Feed Machine, 6"x12" Rated Capacity, Approx 14" Max Between Chuck and Spindle Center, 15" Longitudinal Table Travel, 8" Cross Table Travel, 7" Wheel Capacity, Walker Ceramax 6"12" Permanent Magnetic Chuck, Acu-Rite 2-Axis DRO, Bijur One-Shot Lube, 2HP 230/480 Volt 3-Phase Motor and Controls, s/n: 3917T. Approx 44"x48"x70"
SA 6

Fork Lift for Hire has quoted $100 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

15.1.New In Box Snap-On Christmas Pin Up Girl Clock, Dia. Of Clock Hands 5-1/2", Overall: 23x11".
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
19.Assorted Air Conditioning Service Tools and Supplies: TIF Instruments Electronic Vacuum System; TIF Leak Detector; Gages, Hoses, (7) 12oz Cans of R134a Refrigerant; (1) 14oz can of Freon 12 Refrigereant and More
Approximate Weight: 46lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
20.2008 Doosan Model Lynx 220LC Combination Type Turning Center. 12.6" Max Turning Diameter, 20.7" Max Turning Length, 6.9" X-Axis Travel, 21.6" Z-Axis Travel, 20.1" Max Swing OVer Bed, 11.4" Max Swing Over Saddle, 3" Spindle Thru Hole, Variable Spindle Speeds: 40 to 4000 RPM, 8" 3-Jaw Chuck, 12-Position Turret, A2 #6 Spindle Nose, Tool Setter, Tailstock, Chip Conveyor, Parts Catcher, Coolant Tank with Skimmer, 20.1/14.8 HP (30min/Cont) Spindle Motor, Fanuc Series Oi-TC Control, 220 Volt 3-Phase, s/n: L2203136. Approx 135"x74"x81" and 7700lbs

Video Available. Click on lot to view.
West WHSE 3

Fork Lift for Hire has quoted $250 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

21.New, Walter QDT0421501 HSK Taper Shell Mill Style Holder
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
22.New, Valenite QDT00326-01 HSK Taper Shell Mill Holder
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
23.(3) Gleason Gear Hobs, Part #'s TIALN-50, SHTI-1, Approx. 6-1/4" Cutting Surface, Approx. 3" Dia.
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
24.Assorted Cutting Tools Including (9) Guhring Coolant Through 1/8" Drill Bits, (12) Guhring 25-20 UNC-2BX Taps, and (5) Komet UD4007870 Wedge Style Insert Type Cutting Tools.
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
25.Komet HSK Model UA0600530 Collet Type Tool Holder.
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
26.(2) DiJet Insert Type Shell Mills, (2) No. SMC6012-11281, Serial No. 37097, 6" x 2-1/4" x 3/4" Diameter Arbor
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
27.(21) Assorted HSS Morse Taper Shank Drill Bits, up to .989" Diameter w/ No. 4 Morse Taper Shank
Approximate Weight: 16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
28.(7) Assorted Hardinge Type C Mono Set Collets, 9/16", 3/4", 7/8", No. 3MT, (3) 1-1/8" w/ Wood Case
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
29.(2) 0-1" Disc Micrometers with Ratchet Thimbles: (1) Starrett and (1) Unknown Brand
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
30.Shibaura Model KRTC-11A Rotary Surface Grinder. 42" Diameter Magnetic Chuck, 20" Segmented Grinding Wheel, 45" Max Swing Inside Guards, 24.4" Max Vertical Height, 700 rpm Grinding Wheel, 7-22 rpm Chuck Speed, 50 hp Spindle Motor, Coolant Tank and Pump, 230/460 Volt, 3-Phase, s/n: 472 (New in 1979) , Approx 128" x 67" x 102".
Location: Cambridge, MN

R&R Rigging has inspected this item and is prepared to give rigging quotes. Please Contact Brian at 612-770-2598 for more information.

Video Available. Click on lot to view.
offsite

30.1.Heidrick (7) Drawer Oak Machinist Chest, Overall: 20"x10"x14".
Approximate Weight: 22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
31.Clausing Model 1691 Drill Press. 7 1/2" Throat, 14"x10" Tilting Table, Variable Spindle Speeds: Approx 330 to 2640 RPM, Jacobs Model 14N Ball Bearing Super Chuck: 0-1/2" Capacity, Mobile Base, FWD/REV Switch, 3/4HP 208-230/460 Volt 3-Phase Motor, s/n: 534438. Approx 30"x33"x74"
OTHR
32.(2) Komet UA600540 HSK63 Shank ER20 Collet Style Tool Holders
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
33.(8) 5-Piece Boxes of Guhring 9.525mm HSS Drills. 6 3/4" OAL
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
34.(6) Komet HSK63 Shank Holders: (4) UA0600530 Collet Style; (1) UA0600540 Collet Style; (1) UA0600450
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
35.New, Komet UB9408120 Bore/Counter Bore Head wth Varilock Shank. 8 1/2" OAL
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
36.Nematron Control Terminal
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
37.New, Ingersoll 57K6A0618R03 Insert Type Cutter. 6 1/2" Diameter, 1 1/2" Hole
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
38.(2) 18 3/4" Diameter Cast Aluminum Impellers. 1 3/8" Bore, 3 1/2" Thick
Approximate Weight: 40lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
39.New, Valenite TL#SA1430459R, M1022135 3" Insert Type Shell Mill
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
40.2005 Dodge Ram 2500 3/4-Ton Pickup Truck. 124,295 Miles, 5.7L Hemi V-8 Gasoline Engine, Automatic Transmission, 2WD, PW, PM, PL, CC, AC, AM/FM/CD, Power Drivers Seat, Regular Cab, 8' Box (105" Between Fron and Gate,) Tommy Gate Lift Gate with Aluminum Deck, Custom Stainless Steel Rack, VIN: 3D7KR26D25G742459
out
41.(5) Gleason and (1) Fette Agama Gear Hobs
Approximate Weight: 55lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
42.(3) Hydraulic Type Cat 50 Tool Holders: (2) Schunk, (1) J-P-V
Approximate Weight: 23lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
43.(4) Ratchet Thimble Micrometers: (1) 0-1" Mitutoyo Blade Type; (1) 0-1" S-T Thread Type; (1) 4-5" Starrett with Modified Spindle and Anvil; (1) 4-5" Enco
SIR
44.Seco S120863 Insert Type Slot Cutter. 1 1/4" Shank, 6 3/4" OAL
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
45.Premiere Dehumidifier, On Wheels, 110 Volt, 16"x12"x25"
SA 5
46.(7) Renishaw 4M Conduit Kits
Approximate Weight: 18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
47.Gage Master Series 20 Optical Comparator. 12" Diameter Screen , 14 1/2"x4" Stage, 20x Lens, Gage Master GMX 2-Axis DRO, Cabinet Base, 120 Volt. 20"x48"x68"
SA 7
48.Vibratory Bowl Feeder. 12" Diameter, 110 Volt, Approx 17"x20"x19"
SA 4
49.US Electrical Model 80 Double End Disc Grinder. 18" Diameter Discs, (1) 8"x14" Tilting Table, (1) 7 3/4"x13 3/4" T-Slotted Tilting Table, 1200 RPM, 7 1/2HP 220 Volt 3-Phase Motor, s/n: 262400. Approx 66"x31"x59"
West WHSE 1

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

50.Nisshinbo Model HIQ-1250 CNC Turret Punch, 22-Ton Rated Capacity, 22-Station Turret, 2-Auto Inserting Stations, 49.60" x 49.60" Maximum Sheet Size, 0.25" Maximum Sheet Thickness, 308 Lbs Maximum Workpiece Weight with Sub Table, 1.96" Ram Stroke, 18.50 in/sec Ram Speed, 3.5" Maximum Punching Diameter, 320-Hits per Minute, PC Based Controls, Remote Control Console, Three Phase Motor and Controls, s/n 12078 (New 2000), Approx: 211" x 87" x 93" and 35,000 Lbs

Location: Dodge Center, MN

Seller will load this machine for no charge.

Video Available. Click on lot to view.

51.Branson 900 Series Sonic Welder. 8" Throat, 14"x12 1/2" Table, Dual Buttons, Rolling Stand, Approx 36"x32"x86"
OTHR
52.New, Valenite QDT00326-01 HSK Taper Shell Mill Holder
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
53.Acme Catalog No. T-2A-79521-3S 3-Phase Transformer. 45KVA, 600 Volt Primary, 480Y/277 Volt Secondary, 475lbs, Approx 28"x22 1/2"x29 1/2"
SA 6
54.Baldor Cat No. VM3710T Electric Motor. 7 1/2HP, 1760 RPM, 213TC Frame, 230/460 Volt 3-Phase
Approximate Weight: 75lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
55.(24) Packs of VR Wesson Model BB-83530 VR1129 Carbide Inserts.
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
55.1.Zyliss (4 in 1) Multi Purpose 4-1/2" Vise, Includes Attachments, Manuals, and Box.
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
56.(13) Packs of Assorted Carbide Inserts (Some Partial). Makes/Part Numbers as Shown.
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
57.(10) Starcut Sales Carbide Tipped Gun Drills. Mostly p/n: 2606005T32. 3/4" Shank Dia.
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
58.(7) 5-Piece Boxes of Guhring 9.525mm HSS Drills. 6 3/4" OAL
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
59.(10) Whitney Tool Company Tool #BZ-558 Deburring Tools. 5/8" Shank.
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
60.Summit CNC Vertical Turret Lathe. 59" Diameter Table, 75" Max Swing, 65" Max Under Rail, Variable Table Speeds to Approx 150 RPM, Square Turret with (3) 3" Holes per Face, Mayfran Chip Conveyor, Table Guarding, Coolant, Fanuc Series 21i-T Control, 480 Volt 3-Phase, s/n: Approx 194"x180"x165" and 60,000lbs.

Location: Milwaukee, WI

Video Available. Click on lot to view.

Doral has quoted $800 to load this machine. Please call Steve Bula with questions regarding this quote: 414-507-4117

61.(3) Ferguson Tool Model 2/12 M-7 HSS Drill Bits. 1" Shank.
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
62.(27) SGS p/n: 26428 6mm x 150mm Deburring Bits.
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
63.(8) Insert Type Endmills Including: Valenite VFQF 90SD0200G06R, Carboloy R220.69-02.00-16 and More.
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
64.(4) Indexable Shell Mills Including: Seco R220.96-04.00-08-6A, Carboloy R220.13-04.00-12 and More.
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
65.(9) Assorted Face Mills, 3/4" Arbor, Cutting Head from Approx. 2" up to 2-1/2", Brands Including Seco, Metaldyne, Ingersoll and More Shown.
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
66.Torit Model 75 Dust Collector. Filter Type, 3" Inlets, On Wheels, 1HP 220 Volt 3-Phase Motor, s/n: L129. Approx 23"x27"x76"
HM

Fork Lift for Hire has quoted $30 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

67.Seco S120863 Insert Type Slot Cutter. 1 1/4" Shank, 6 3/4" OAL
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
68.Caldwell Coil Hook. 1-Ton Capacity, 30" Max Coil Diameter, 21" Long Support, s/n: 23546
SA 4
69.Ingersoll 5VK6V-0810099R10 Insert Type Cutter. 8" Diameter, 1 1/2" Hole
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
70.Fadal Model VMC 15 Vertical Machining Center. 29 1/2"x16" T-Slotted Table, 20" X-Axis Travel, 16" Y-Axis Travel, 20" Z-Axis Travel, Variable Spindle Speeds to 7,500 RPM, Cat 40 Spindle Taper, 21-Position Automatic Tool Changer, 750 lb. Table Load Capacity, RS-232 Port, Coolant, Full Enclosure, Fadal 88HS CNC Control, 7 1/2HP 230/440 Volt 3-Phase Motor, s/n: 9809684. Approx 84"x94"x101" Note: Z-Axis Motor Requires Repair

Location: Wasau, WI

Video Available. Click on lot to view.

Removal for this item is May 23rd 2017.

Industrial Service and Machine has quoted $950 to load this machine. Please call Herb with questions regarding this quote: 715-355-3000

71.(3) Assorted Face Mills, (1) Ingersoll 6K2A02R21-017873B Shell Mill, 3/4" Arbor, Approx. 2-1/2" Cutting Surface, (2) 12" Arbor Facemills and More Shown.
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
72.(6) Assorted Shell Mills, From Approx. 2" Cutting Surface up to 3", Including, (1) Valenite 539.63.044, 1" Arbor, (1) Carboloy R220.69.05.00-16G5C1, 1" Arbor, (1) Seco R220.69-03.00-12-7AN, 1" Arbor, amd More Shown.
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
73.(6) Assorted Shell Mills, Mostly 3" Cutting Surface, Mostly 1" Arbor.
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
74.(15) Whitney Tool Company Tool #BZ-558 Deburring Tools. 5/8" Shank.
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
75.Assorted New Taps from 4-44 to 1/4-32
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
76.2-Door Rolling Cabinet. 36"x24 1/4"x35 3/4"
OTHR
77.Eastey Model ET2416 Heat Tunnel. 24" Wide Plastic Mesh Belt, 26"x16" Window, 52" Tunnel Length, Variable Speed Conveyor, On Wheels, 220 Volt 3-Phaqse, s/n: 492416H. Approx 92"x37"x76"
OTHR

Fork Lift for Hire has quoted $100 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

78.Metal Rack with (41) 5 1/2"x16 1/2"x4 1/4" Plastic Bins, (24) 8"x16 1/2"x4" Plastic Bins. Approx 36"x18"x75"
SA 5
79.Acme Catalog No. T-2A-79521-3S 3-Phase Transformer. 45KVA, 600 Volt Primary, 480Y/277 Volt Secondary, 475lbs, Approx 29"x23"x30"
Rack
80.Okamoto Model PSG-126B Surface Grinder. Hydraulic Machine, 24"x48" Rated Capacity, 37.4" Max Between Table and Spindle Axis, 20"x2"x5" Grinding Wheel Size, 55.2" Longitudinal Table Travel, 24.8" Cross Travel of Column, .00019" to .0019" Vertical Feed per Table Stroke, 47 1/4"x23 5/8" Kanetsu Electromagnetic Chuck, Hydraulic Wheel Guard Dresser, Acu-Rite 2-Axis DRO, Coolant Tank and Pump with Magnetic Separator, 10HP 3-Phase Spindle Motor and Controls, s/n: 159. Approx 163"x108"x99" and 17,200lbs

Location: Hopkins, MN.

Note: Seller will match-mark, disconnect and drain coolant tank and hydraulic reservoir.

Video Available. Click on lot to view.

81.Jorgensen Self-Dumping Hopper. Approx 1/4Yd Capacity, On Wheels, 40"x62"x34"
West WHSE 3
82.(3) Metal Rolling Carts,
Overall Dimmensions: 57" x 40" x 43".
OUT

Fork Lift for Hire has quoted $30 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

83.Societe Genevoise Type P1-4 Rotary Indexer. Approx 11" T-Slotted Face with 20" Drilled and Tapped Mounting Plate, Adjustable Angle, s/n: 479. Approx 31"x21"x21"
SA 4
84.Dayton Model 2M168C Variable Speed Motor. 1/2HP 1725 RPM 90VDC with Reversing SCR Control, 110 Volt Supply
SA 4
85.New, Valenite QDT0032601 HSK Taper Shell Mill Holder
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
86.Tsudakoma 4th Axis. 6 1/2" Center Height, 10" T-Slotted Face Plate, Cables, Approx 22"x8"x23"
SA 6
87.Chain Link Safety Enclosure wih 45" Wide Door. Approx 63"x87"x75"
OUT

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

88.(35) Bearings. 4.725" OD, 2.163" ID, 1 1/8" Thick
SA 7
89.Custom Fixture Consisting of (1) 24"x44 1/4"x48" Anodized Aluminum Plate with Assorted Holes; Rolling Steel Frame Constructed From (2) 2"x8"x32 1/2" Legs and 3"x3" Square Tube. Approx 44 1/2"x32 1/2"x55"
OTHR

Fork Lift for Hire has quoted $40 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

90.Kira Model VTC30 Elite Machining Center. 19.7"x12.6" T-Slotted Table, 17.3" X-Axis Travel, 11.4" Y-Axis Travel, 10.6" Z-Axis Travel, Variable Spindle Speeds: 120 to 12,000 RPM, BT30 Spindle Taper, 20-Position Tool Changer, Rigid Tapping, Coolant, Full Enclosure, 5HP Spindle Motor, Fanuc Series 21i-M Control, 200 Volt 3-Phase, s/n: L0390. Approx 44"x69"x84" (Machine) 44"x32"x20" (Coolant Tank) 34"x30"x32" (Hydraulics)
West WHSE 1

Fork Lift for Hire has quoted $150 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

91.Dukane Model 98826 43A250 US19987 Sonic Welder. 8 1/2" Throat, 16"x14 1/2" Useable Table Area, Finger Switches, Custom Fixture, Rolling Stand, Approx 48"x36"x79"
OTHR

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

92.Seco S120863 Insert Type Slot Cutter. 1 1/4" Shank, 6 3/4" OAL
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
93.(7) Renishaw 4M Conduit Kits
Approximate Weight: 18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
94.Tigerstop Automatic Stock Stop and Pusher. 10' Stop Travel, Control, 110 Volt, Approx 144"x15"x4"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

95.Keystone Dehumidifier, On Wheels, 110 Volt, 16"x12"x23"
SA 5
96.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-1. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

97.Miller Model Dialarc HF Constant Current AC/DC Arc Welder. 250 Amp 30 Volt Rated Output @ 40% Duty Cycle, 75 Max OCV, TIG Torch, Ground Clamp, Cart Mounted, 200/230/460 Volt 1-Phase, s/n: JG031265. Approx 20"x54"x36"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

98.Pair of Cascade Forklift Forks. 2" Fork Thickness, Will Fit 20" Carriage, 4 3/4"x20" Fork Dimensions, No Lock Pins

Location: Wasau, WI

Removal for this item is May 23rd 2017.

99.Trans Tech America Heat Tunnel. 8" Wide Mesh Belt, 8 1/2"x8" Window, 33 1/2" Tunnel Length, On Wheels, 3-Phase, s/n: TPPT-90075N. Approx 75"x23"x64"
OTHR

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

100.1996 Chevrolet Kodiak. 427 Cu. In. Gasoline Engine, 5-Speed Manual Transmission, 5-1/2 Yard dump Box, 32,000 GVWR, 157,9XX Miles, VIN:1GBL7H1M81J106742. (Note: Truck has current DOT)

Video Available. Click on lot to view.
OUT

101.(14) Insert Type Boring Bars, Mostly 3" Long Shank, Mostly 3/4" Diameter Shank.
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
102.(12) Assorted 30 Taper Tool Holders Including: Parlec B30-10EM356, Universal AF911107, Collis .750 and More.
Approximate Weight: 26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
103.(3) Lyndex BT40 Taper Collet Type Tool Holders.
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
104.(5) Assorted Insert Type Cutters: (1) 3" Shell Mill; (2) 5 1/2" Diameter Cutters with 1" Hole, (2) with 1 1/2" Hole
Approximate Weight: 33lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
105.(4) Assorted Insert Type Cutters with 2" Hole
Approximate Weight: 26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
106.(4) Insert Type Thread Mills with 1 1/4" Shank, 5" to 6" Long
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
107.(14) Guhring HSS Drills. Approx 9.525mm, 6 3/4" OAL
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
108.(6) HSK50 Shank Tool Holders: (5) with 2" Insert Type Cutters. 10" OAL
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
109.(4) Guhring GM300 HSK-A 63 Shank End Mill Holders. Approx 1" Capacity
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
110.2001 Chevrolet C7500 Straight Truck. 226,738 Miles, Caterpillar 7.2L 6-Cylinder Turbo Diesel Engine, Automatic Transmission, Air Brakes, 22' Load Deck, VIN: 1GBM7H1C01J508246
OUT
111.(5) Guhring and (1) Kelch Hydraulic Clampling Type HSK63 Shank Tool Holders
Approximate Weight: 20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
112.(4) HSK63 Shank Tool Holders: (2) Collet Style and (2) Mapal No. 30460668
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
113.(7) Assorted HSK63 Shank Tool Holders
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
114.Craftsman 10" Radial Arm Saw. 5/8" Arbor, 40"x18" Table, Miter/Bevel/Rip, Rolling Cabinet Base, 110 Volt, Approx 40"x42"x64"
OTHR
115.(4) 60"x28" Metal Bench Tops
Rack
116.Assorted Light Curtain Components up to 16"
Rack
117.Enclosed Hot Water Pressure Washer. 36"x24"x28" Inside, 33"x13" Window, Gloves, Gun, Ingersoll Rand Pneumatic Pump, Electric Heater, Foot Controls, Approx 52"x34"x65"
HM

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

118.Poulan Pro Model PR8527ES Snow Blower. 2-Stage, 27" Cut, Pneumatic Tires, Tecumseh 8HP Engine with Plug-In Electric Start, s/n: 111507M000797
HM
119.Assorted Graphite and 20mm Electrode Shanks
SA 4
120.ESAB Model GXM-1200 Plasma Cutting System. 3-Head Machine, Hypertherm Model HT-400 Plasma Cutting Power Sources, 200V 400A Rated Output @ 100% Duty Cycle, 460 Volt 3-Phase, Auto-PathGX Control, s/n: 8488.

Location: Mountain Lake, MN

121.56"x28"x1 3/4" Drilled & Tapped Aluminum Fixture Plate
SA 4
122.TJ Snow - Standard Spot Welder, 2-Head Type, Approx 10-1/2" Throat, 24-1/2" Between Heads, 2 x 85 Advertised KVA @ 50% Duty Cycle, Entron EN1000 Digital Controls, 440 Volt, s/n 3306, Approx: 55" x 55" x 84"
HM

Fork Lift for Hire has quoted $125 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

123.New, Valenite QDT00326-01 HSK Taper Shell Mill Holder
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
124.(3) Assorted Insert Type Cutters with Coolant Thru, (1) Seco No. SD70-6866-173-1000F, (1) Seco No. SD55-0750-225-1000R7 and (1) AME Spade Drill No. 24000S-075L, #0 T-A-STD 3/4" SS
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
125.Mitutoyo Precision Bore Gauge, 1.4-1.6, 1 DIV. T.0002" Grads
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
126.(3) Carbide Tipped Circular Saw Blades Approx. 20" Diameter x 206" x 2" Arbor x 80 Tooth, Unknown Mfg.
Approximate Weight: 48lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
127.Dayton Model 2M167C DC Motor With Variable Speed Control. 1/4HP 1725 RPM 90VDC, SCR Control, 110 Volt Supply
SA 4
128.(3) Cone Bottom Media Hoppers: (2) Conair Approx 24"x24" and (1) Unknown Brand, Approx 20"x20"
SA 4
129.18"x12"x4" Granite Surface Plate
SA 4
130.Toshiba Shibaura Model BMC-4B Horizontal Machining Center, 19.685" X-Travel, 19" Y-Travel, 20" Z-Travel, (2) 15-3/4" x 15-3/4" Pallets, Cat 40 Spindle Taper, Tosnuc 520 CNC Control, (32) Pocket ATC, Daikin Coolant Chiller, Coolant Tank and Pump, Chip Conveyor, 230/460 volt, 3-Phase, s/n: 211129, Approx. 14' x 11' x 8-1/2' Overall. (Note: Fixturing and Tooling is NOT Included)

Location: Fridley, MN

Video Available. Click on lot to view.

131.8" Machine Vise with Handle
SA 4
132.Assorted Items: Control Pedestal, Roller Conveyor, Coolant Tank.
HM
133.Chicago Pneumatic Tool Co. Pneumatic Chain Hoist. 1000lb Capacity, Swivel Hook, Chain Bag, Pendant Control
SA 4
134.TJ Snow Spot Welding System with Aro Spot Welder. 9" Throat, Cables, EN1000 Solid State Control, Unknown KVA
HM

Fork Lift for Hire has quoted $40 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

135.PA Industries Model SRf-300 Stock Straightener. 12" Capacity, with PA Industries "The Edge" Servo Feed Control, s/n: 201111-06507
HM

Fork Lift for Hire has quoted $40 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

136.A.A. Industries Ultradet Rotary Table. 12" Diameter Drilled & Tapped Face, Vertical/Horizontal Mount
SA 4
137.New Stator & Flange Set. Approx 10" Diameter, 22" Long
HM
138.Rubber Belt Elevating Conveyor. 13 3/4" Belt Width, 8 1/2" Entry Height, 55" Exit Height, On Wheels, 110 Volt, Approx 103"x20"x58"
OTHR
139.Max-Vac Commercial Vacuum with Hose and Stand. 110 Volt, Approx 27"x25"x74"
HM
140.Chiron Model FZ12S Vertical Machining Center. 14 1/2"x37 " T-Slotted Table,18" X-Axis Travel, 10" Y-Axis Travel, 21" Z-Axis Travel, Variable Spindle Speeds to 6,000 RPM, 12-Station Tool Changer, (2) Kurt Model 3600H 6" Hydraulic/Manual Vises, Fanuc OM CNC Control, s/n: 101-25. Approx 72"x102"x100"

Location: Wasau, WI

Video Available. Click on lot to view.

Removal for this item is May 23rd 2017.

Industrial Service and Machine has quoted $950 to load this machine. Please call Herb with questions regarding this quote: 715-355-3000

141.(3) New GKI 6W3B02R04 Insert Type Milling Cutters
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
142.(2) Sandvik STN003206/3 Insert Type Cutters. 5" Diameter
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
143.Approx (25) Modular Cat 50 Tool Holders
HM
144.Approx (20) Assorted End Mill Style Cat 50 Tool Holders
HM
145.(12) Assorted Collet Style Cat 50 Tool Holders
Approximate Weight: 80lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
146.Approx (31) Varilock Style Cat 50 Tool Holders
HM
147.Approx (20) Assorted Cat 50 Tool Holders. Mostly Shell Mill Style, Some Custom
HM
148.(11) Assorted Cat 50 Tool Holders. Boring, Tapping, Morse Taper and Other Types, (1) NMTB 50 Taper Morse Taper Style Included
HM
149.(2) Eppinger Square Shank Tool Holders for CNC Lathe. 1 1/2" Diameter Serrated Shank
Approximate Weight: 20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
150.Nisshinbo Model HTP1000 CNC Turret Punch, 22-Ton Rated Capacity, 22-Station Turret, Auto Indexing Stations, 39" x 50" Maximum Sheet Size, 0.23" Maximum Sheet Thickness, 264 Lb Maximum Workpiece Weight, 1.96" Ram Stroke, 10.62 in/sec Ram Speed, 3.5" Maximum Punching Diameter, 220 Hits per Minute, PC Based CNC Controls, Remote Control Console, Three Phase Motor and Controls, s/n HTT-97120 (New 1997), Approx: 168" x 91" x 87" and 28,000 Lbs, Note: Machine Needs Repair.

Location: Dodge Center, MN

Seller will load this machine for no charge.

151.Southworth Pallet Leveler. Unknown Capacity, 43 3/4" Diameter Swivel Ring, Approx 44"x48"x29 3/4"
HM

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

152.Acme Cat No. T-3-53311-15 3-Phase Transformer. 15kva, 480 Volt Primary, 208Y/120 Volt Secondary, 245lbs, Approx 20 1/2"x9"x19"
HM
153.Annovi Reverberi Electric Pressure Washer. 2.1 GPM Max Flow Rate, 1450psi, 110 Volt, Cart Mounted
HM
154.Seco S120863 Insert Type Slot Cutter. 1 1/4" Shank, 6 3/4" OAL
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
155.LNS Model 52878142 Chip Conveyor. 27"x27" Collection Area, 21" Wide Belt, 36" Exit Height, 1/4HP 230/460 Volt 3-Phase Motor, s/n: 13528700394. Approx 106"x40"x64"
HM

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

156.(5) HSK Shank Tool Holders: (4) HSK80 and (1) HSK100
Approximate Weight: 23lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
157.Allied Tool Adjustable Boring Head with 1" Straight Shank
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
158.German Made 3D Taster with 3/4" Straight Shank
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
159.Aluminum Extension Ladder. (2) 10' Sections, Approx 17' Extended Length
160.Mitsubishi Model DWC90C Wire EDM. 20.8" x 16.5" Table Size, 11.8" X-Travel, 9.8" Y-Travel, 6.3" Z-Travel, 13.7" x 15.7" x 6.3" Max Work Piece Size, Transformer, 3-Phase, s/n: 599C157B, Approx. 84" x 80" x 74" Overall.

Location: Fridley, MN

161.(8) Assorted Insert Type Cutters, 5 1/4" to 6" Diameter
Approximate Weight: 42lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
162.(2) Ingersoll 56L6R0520R02 72440-E 5 5/8" Diameter Cutters, 1 5/8" Bore
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
163.(4) TSE 9577-TM-09 Insert Type Milling Cutters. 3" Cutting Diameter, 5" OAL 2 11/16" Shank Diameter
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
164.(2) Insert Style CNC Lathe Turret Tools. 1 1/8" Serrated Shank
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
165.(6) Assorted 3" to 5" Diameter Cutters
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
166.(4) New, Ingersoll 6KV0203 2 1/2" Insert Type Shell Mills
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
167.(2) Valenite SA-10072024 8" Insert Type Cutters with 2 1/4" Bore
Approximate Weight: 39lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
168.(5) 2 1/2" Diameter Insert Type Cutters with 9/16" Shank
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
169.(5) Polished Star Knobs with Approx 1/2" Threaded Shank. 1 7/8" Knob Diameter
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
170.Kingston Model HR3000 Removable Gap Engine Lathe. 35 1/2"/45" Swing Over Bed/In Gap, 130" Between Centers, 4 1/8" Hole Thru Spindle, 16 1/2" Gap Length, 25" Swing Over Cross Slide, (16) Spindle Speeds: 8 to 800 RPM, Standard & Metric Threading, 24" Cushman 3-Jaw Chuck, 15" 3-Jaw Chuck, 22" & 24 1/4" Face Plates, Threading Dial, 2-Speed Tailstock, Foot Brake, Coolant, Chip Pans, Assorted Steel and Aluminum Chuck Jaws, 20HP 460 Volt 3-Phase Motor and Controls, s/n: 03740504A. Approx 205"x64"x72" and 13,000lbs

Video Available. Click on lot to view.

Fork Lift for Hire has quoted $375 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

171.(2) Carboloy R220.13-06.0-12
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
172.(2) Valenite TL# 1007-2025 8" Diameter Cutters with 2 1/4" Bore
Approximate Weight: 35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
173.Mapal 250mm Insert Type Aluminum Body Cutter
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
174.Sandvik A570-3C D32 27-40 Cylindrical Shank. 679mm Functional Length, 50.8mm Body Diameter, 318mm to 476mm Overhang, 679.325mm Body Length
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
175.(3) Valenite TL#SPN02133H02 3" Insert Type Shell Mills
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
176.(5) 2" Diameter Insert Type Shell Mills
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
177.(3) New, Ingersoll 6KV0203 2 1/2" Insert Type Shell Mills
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
178.Ingersoll 6X4S04R10 7436-M 4" Insert Type Shell Mill
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
179.Valenite TL#SA1430459R, M1022135 3" Insert Type Shell Mill
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
180.Pines No. 1 NC Tube and Pipe Benter. 1 1/2"x.109" Wall Mild Steel Tube Capacity, 1 1/2"x.188" Wall Non-Ferrous Tube Capacity, 1" Schedule 80 Pipe Capacity, 8" Max Centerline Radius, 180-Degree Max Rotation, Hydraulic Pressure Die Assist, Auto Slide Lubrication, Counter-Clockwise Rotation, 480 Volt 3-PHase, s/n: 11005-8153. Approx 156"x48"x52"
South WHSE

Fork Lift for Hire has quoted $150 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

181.(8) Assorted Cat 50 Tool Holders: (5) Modular, (3) Varilock
HM
182.(10) TG Collet Style Cat 50 Tool Holders.
HM
183.(9) Assorted Collet Style Cat 50 Tool holders Including Erickson, Valenite, Kennametal etc.
HM
184.(10) TG Collet Style Cat 50 Tool Holders.
HM
185.(6) TG Collet Style Cat 50 Tool Holders
HM
186.(4) Kennametal Model CV40SM200240 Shell Mill Style Cat 50 Tool Holders
Approximate Weight: 50lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
187.(7) Assorted Insert Style Shell Mills from 3" to 5" Diameter
Approximate Weight: 18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
188.(2) New Valenite Insert Side Milling Cutters, (1) No. VMM-50-6-0816LA, (1) No. VMM-50-6-0816RA, Approx. 7-7/8" Diameter x 1-1/2" LA x 1/2" Arbor, 1.00" RA
SIR
189.Hundreds of Assorted Tool Holder Insert Screws
SIR
190.TA Systems Hot Plate Welder. 18"x36" Vertical Tool Mounting Platens, Hydraulic movement, 18"X36" Vertical Hot Plate Carrier, (3) Vickers Speed Controls, Hydraulic Pump in Base, (2) Heat Zones to 850F, Pneumatic Clamping, Vacuum to Secure Parts, Allen Bradley SLC5/01 PLC, DTAM Interface to Enter Parameters, s/n: 94460. Approx 7'x4'x7' and 4000lbs

Location: St. Paul, MN

191.Approx. (75) Assorted Sandvik, Valenite, Ingersol Replacement Insert Boring Heads
SIR
192.JL-36 Kick Press. 4" Throat, Stand, Approx 20"x26"x44"
SA 7
193.Lincoln Colde No. 1533 Arc Welder. 300 Amp Max Output, Stick Clamp, Ground Clamp, Assorted Supplies, On Wheels, s/n: A255320. Approx 57"x26"x48"
OTHR

Fork Lift for Hire has quoted $40 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

194.3-Cylinder Air Compressor Pump. No Motor, Approx 48"x30"x33"
SA 6
195.OKI Model C5550 MFP Multi-Function Machine. Color Laser Printer/Copier/Fax, USB/Network Input, Approx 20"x24"x26"
OTHR
196.(2) New Valenite Insert Side Milling Cutters, (1) No. VMM-50-6-0816LA, (1) No. VMM-50-6-0816RA, Approx. 7-7/8" Diameter x 1-1/2" LA x 1/2" Arbor, 1.00" RA
SIR
197.Approx. (28) Assorted HSS and Carbide Tipped Forming End Mill Cutters, up to .778" Diameter
SIR
198.(17) DoAll HSS T-Slot Cutters No. A34-331-9033, Rev A, Approx. 1.015" x .223" x .500" Diameter Shank
SIR
199.(10) E-Z Burr HSS Series No. SEZ-2554 / W-3933, Approx. 8" x .582" x .565" Shank Diameter and (2) Hammer Adapters, No. HG02
SIR
200.Toyoda Model GE 4P-50 CNC Cylindrical Grinder. 12.598" Swing Over Table, 19.685" Between Centers, 11.811" Max Grinding Diameter, 330lb Max Load Between Centers, 15.9"x2.95"x5" Max Wheel Size, 1550 RPM Wheel Speed, 9.842" Wheelhead Stroke, 30.315" Table Stroke, 12.5 - 0 (CCW-CW) Table Swing Angle, Motorized Work Head, Variable Workhead Speeds: 0-500 RPM, -30 to 90 Degree Workhead Swing Angle, Lever Type Tailstock, Marposs E9 Gaging, RS232 Port, No Coolant Tank/Pump, 5HP Wheelhead Motor, Toyoda DC32 Control, s/n: RC7496. Approx 107"x80"x72" and 8800lbs
West WHSE 1

Fork Lift for Hire has quoted $200 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

201.Approx (55) Coolant Thru Carbide Tipped Reamers
Approximate Weight: 20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
202.Approx (21) Assorted HSS Ferguson Tool Co Reamers and Step Drills
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
203.Approx (39) Tek-Ni-Kut Corp HSS .437" Drills
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
204.(4) Assorted Sony Digital Cameras: (1) Model DSC-W5; (1) Model DSC-H70 and (2) Model DSC-H90
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
205.(2) Komet UB8301760 HSK63 Shank Insert Style Cutters
Approximate Weight: 30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
206.(4) Guhring Carbide Tipped Coolant Thru Cutters with Padded Wooden Cases
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
207.(5) Guhring Carbide Tipped Coolant Thru Cutters with Padded Wooden Cases
Approximate Weight: 20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
208.New, Komet UA0600491 HSK63 Shank Shell Mill Style Tool Holder
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
209.(7) Guhring Carbide Tipped Coolant Thru Cutters with (5) Padded Wooden Cases
Approximate Weight: 20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
210.DoAll Vertical Band Saw. Unknown Model, 20 1/2" Throat, 32"x41" T-Slotted Tilting Table, 11" Max Under Blade Guides, Variable Blade Speeds in (3) Ranges, 40 to 10,800 FPM, Power Table Feed, Power Table Tilt, Hydraulic Blade Tension, Blade Welder/Grinder, 480 Volt 3-Phase Motor and Controls, s/n: 32-50118. Approx 76"x57"x86"

Video Available. Click on lot to view.

Fork Lift for Hire has quoted $150 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

211.Approx (21) 10 5/8"x1"x7" Grinding Wheels with Internal Teeth
Approximate Weight: 90lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
212.Approx (90) Assorted HSS Drills up to .4375" Diameter. Straight and MT Shanks
Approximate Weight: 35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
213.Approx (40) Assorted HSS Drill Bets up to .700" Straight and Morse Taper Shanks
Approximate Weight: 12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
214.(8) Assorted Tool Holders: (2) Cat 40 No. CV40K50236; (1) Tapmatic; (2) Sandvik Varilock and (1) Mapal No. 30010268
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
215.Approx (35) Assorted HSS Reamers, Tapered Reamers, end Mills and Drills up to 1"
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
216.(6) Assorted Insert Type Boring Bars: (2) 11 1/2"x2"; (4) 7"x1 1/4" and (1) 7"x1"
Approximate Weight: 26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
217.Hundereds of Honing Stones
Approximate Weight: 30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
218.(50 Gleason Gear Hobs. 2.985" to 3.020" Diameter, Approx 7 5/8" Long, 1 1/4" Bore
Approximate Weight: 43lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
219.(16) Assorted Collet Style Cat 50 Tool Holders Including Command C6C4-0020, C6C5-0016 and Similar
HM
220.Master-Cut Model S-300HA Horizontal Band Saw. Manual Type, 10"x12" Capacity in Flats, 10" Capacity in Rounds, Variable Blade Speed, 1" Blade Width, Hydraulic Clamping, Hydraulic Blade Tension, Chip Auger, Coolant, 7' Infeed Conveyor, 220/440 Volt 3-Phase Motor. Approx 84"x72"x61" (84"x156"x61" with conveyor)

Video Available. Click on lot to view.

Fork Lift for Hire has quoted $125 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

221.(3) Ingersoll 762H044-10 Cat 50 Tool holders with komet Hydraulic Style Holding Fixtures
Approximate Weight: 54lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
222.Approx (28) Assorted HSS Drills, Step Drills
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
223.Approx (50) Assorted HSS Drills, Core Drills, Some Carbide Tipped
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
224.Approx (50) Assorted HSS End Mills up to 1 3/8" Diamter, Taper Reamers, Drill Bits and More
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
225.(11) Assorted End Mill Style Cat 50 Tool Holders up to 1 11/4" Capacity
HM
226.(2) Like New, 5" Insert Type Shell Mills
SIR
227.(2) Valenite SA-10072024 8" Insert Type Cutters with 2 1/4" Bore
Approximate Weight: 36lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
228.Mapal 315mm Insert Type Aluminum Body Cutter
Approximate Weight: 30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
229.(5) Assorted 6" Diameter Insert Type Cutters with 1 5/8" Arbor Hole
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
230.Harrison Model M300 Engine Lathe. 13" Swing Over Bed, 40" Between Centers, 8 1/4" Swing Over Cross Slide, 1 1/2" Hole Thru Spindle, (12) Spindle Speeds: 40 to 2500 RPM, (39) Metric Threads: .2 to 14mm, (35) Standard Threads: 2 to 56 TPI, (18) Module Threads: .3 to 3.5 MOD, (18) Diametral Threads: 8 to 56 DP, 8" 3-Jaw Chuck, 8" 4-Jaw Chuck, Threading Dial, Tailstock, Foot Brake, Metric Collars, 3HP 460 Volt 3-Phase Motor and Controls, s/n: 30195. Approx 74"x32"x48" and 1500lbs

Video Available. Click on lot to view.

Fork Lift for Hire has quoted $100 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

231.(2) Electric Motors: (1) SEW 1/2HP 230/460 Volt 3-Phase, 1760 RPM with Reduction Gear Box, 2060 in/lb 11RPM Output; (1) Fuji 220 Volt 3-Phase with Incomplete Coolant Pump
Approximate Weight: 95lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
232.(1) New Valenite No. VMM-50-6-0816RA Side Milling Cutter, Approx. 8" x 1-1/2" x 1-1/2" Arbor
SIR
233.(15) Whitney Tool T-Slot Cutters, Approx. .888" x .093" x 1/2" Shank
SIR
234.Hundreds of Assorted Insert Holding Screws and 1/4-20 Socket Cap Screws, Valenite Insert Replacement Boring Heads No. VPB-2313-CUA and More
SIR
235.(3) Assorted New Dihart Tool Holders, (2) No. 507-02-010, (1) No. 507-02-008
Approximate Weight: 23lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
236.(17) Whitney Tool T-Slot Cutters, No. DWG.B34-123-9023
SIR
237.(19) Form Tool Technology HSS & Carbide Tipped Cutters, (10) HSS .744" Diameter x .625" Body x .500 Shank, 4-3/8" Long, (9) Carbide Tipped Chamfer Cutters, .3805" x .250" Shank, 3-1/8" Long
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
238.(4) New Lumco Ball Nose Insert Cutters, No. BNKH, 1.50-1.50-6.50-4
SIR
239.4th Axis/Rotary Indexer. Unknown Brand, 10" Diameter T-Slotted Face Plate, 7 1/2" Center Height, Fanuc Servo Motor, Approx 33"x27"x14"
SA 4
240.Jones & Lamson Automatic Thread Grinder. 11" Center Height, 34" Max Bewteen Centers, 16" Grinding Wheel Capacity, (9) Wheel Speeds: 1000 to 2600 RPM, (36) Work Speeds: .36 to 37 RPM, Coolant Tank & Pump, Work Bench, 3-Phase Motor and Controls, s/n: 105"x88"x74" (Machine) 48"x36"x64" (Motor/Generator Unit) and 15,000lbs Gross
West WHSE 3

Fork Lift for Hire has quoted $300 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

241.United Silicone Model UP308 Pad Printer. 7"x7" Platen, Foot Switch, 110 Volt, s/n: RPC09971453. Approx 34"x43"x68"
HM

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

242.Komet Model UB9408120 Quick Change Finish Boring Tool/ C'Bore.
SIR
243.Approx. (41) Ingersoll Diamond Tipped Carbide Inserts, (34) No. PYE-43L003-S-1N90L, (4) No. 43R016-S, (2) No. 43R021
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
244.(2) Valenite 3" Insert Type Shell Mills: (1) TL#SPN02133H02 and (1) RM1022135
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
245.(105) Knight Carbide Cutting Tool Inserts, Part Number: TV00420 K5HL Cutting Tool Inserts.
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
246.(3) DiJet Insert Shell Mills, (2) No. SMC6012-11281, Serial No. 37099, 12 Tooth, Approx. 6.00" x 2-5/16" x 3/4" Arbor, (1) No. SMC 5.010-10436, S-35813, 10 Tooth, Approx. 4-7/8" Diameter x 2-5/16" x 3/4" Arbor
Approximate Weight: 42lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
247.(2) Ingersoll Insert Shell Mills No. 6K5V-06R01 V-Max, 6" x 2-1/4" x 1-1/2" Arbor, 21 Tooth
SIR
248.United Hardness tester, Model: UHT-10, S/N 87359, 32" x 7" x 8".
249.(3) MCS Pneumatic Box Tippers. 2000lb Capacity, 1250lb Tip Capacity, Approx 56"x56"x42" Each
SA 6
250.AMH Model 133 MSF Bender/Expander. 3/4" to 3" Bending and Swaging Capacity, 1 1/4" to 3" Hydra-Sizer Capacity, On Wheels, 5HP 230 Volt 3-Phase Motor, s/n: 2670. Approx 43"x66"x43"
West WHSE 2

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

251.(1) Ingersol Insert Milling Cutter No. 54U650820R-02, 08613-C, Approx. 8" x 1.125" x 2" Arbor
SIR
252.(4) New Lumco Ball Nose Insert Cutters, No. BNKH, 1.50-1.50-6.50-4
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
253.Misc Tooling: Ring Gage, Spindle Extensions, Gleason Diamond Wheel and More
Approximate Weight: 33lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
254.Weldon Adjustable Angle Grinding Fixture
Approximate Weight: 42lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
255.(3) New Komet HSK63 Shank Tool Holders: (1) UA06000450; (1) UA0600540 Collet Style; (1) UA0600491 Shell Mill Style
Approximate Weight: 19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
256.(3) Sets of Aluminum Chuck Jaws. 3 3/4", 8" and 7 3/4" Diameter
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
257.(2) Live Centers: (1) Shoda with #3 MT; (1) Unknown Brand, #4 MT
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
258.Assorted Items: Center Punch kit, Scriber, Edge Finder, Mighty Mag Holder, 4x/8x Magnifier, Squares and More
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
259.Approx. (20) Melcut Tool Counter Bores #B-33-561-0058, 5-1/8" x .490/4.20" x .437" Shank
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
260.Yale Load King Model PA1M10L25TMP Electric Hoist. 1-Ton Capacity, Trolly, Pendant Control, 460 Volt 3-Phase.
SA 6
261.Approx. (70) Assorted HSS Taps, 6-32" up to 13/16-20"
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
262.(2) New Valenite Insert Side Milling Cutters, No. M1004056, Approx. 5-5/8" x 1.125" x 1.625" Arbor
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
263.(3) New Ingersoll 6K6V-03R06 3" Insert Type Shell mills
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
264.Mapal 315mm Insert Type Aluminum Body Cutter
Approximate Weight: 32lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
265.(8) Coolant Thru, Insert Type Drills/Countersinks. Approx 1" Diameter, 2" Flute Length, Varilock Type Shank
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
266.(7) Coolant Thru, Insert Type Drills/Countersinks. Approx 1" Diameter, 1" Flute Length, Varilock Type Shank
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
267.(9) Assorted Vari-Lock Adapters/Extensions
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
268.(2) Items: (!) Mapal Isotool Insert Type Cutter. 22" OAL, 2 1/2" Shaft Diameter; (1) Arbor, Approx 1 3/4" Diameter, 13" Long, With Spacers
Approximate Weight: 53lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
269.(5) Komet UA0115311 1 1/4" Diameter Shanks
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
270.Caterpillar Model T50C LP Powered Forklift, Approx 5,000 Lb Capaity, 48" Tilting Forks, 106" Vertical Lift, Cushion Tires, s/n 38Y02223.

Video available. Click on lot to view.

Location: St. Cloud, MN

271.(6) Assorted 5" Diameter Insert Type Shell Mills
Approximate Weight: 39lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
272.(5) Assorted Insert Type Shell Mills, 4" to 6" Diameter
Approximate Weight: 35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
273.(4) New Ingersoll 6K6V-03R06 3" Insert Type Shell mills
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
274.Square D Cat No. 10S40F Transformer. 10KVA, 480 Volt High, 12/240 Volt Low, Approx 10"x12"x13"
SA 4
275.(3) Steel Frames. 4"x4" Square Tube Construction, 36" Wide at Basee, Approx 89" Long, 6"x6" Mounting Flange at Top, Leveling Feet
OUT
276.Visumatic Model MD11M-HP Bowl Feeder. 120 Volt, s/n: 990908. Approx 15"x19"x26"
SA 7
277.(3) C-Frame Pneumatic Presses. 5" Throat, Dual Buttons, Approx 3" Stroke.
SA 7
278.Weber 9" Vibratory Bowl Feeder with Articulated Arm Insertion Tool
SA 7
279.Rolling Staircase. 45" Top Tread Height, 23" Tread Width, 75 1/4" Overall Height
OTHR
280.TA Systems 36"x15" Hot Plate Welder. 36"x15" Vertical Tool Mounting Platens, Hydraulic Movement, 36"x15" Vertical Hot Plate Carrier, 26" Between Fully Retracted Platens, (2) Heat Zones to 850F, Pneumatic Clamping, Vacuum to Secure Parts, Allen Bradley SLC5/01 PLC, quickpanel JR Touch Screen Interface, Powertran 75KVA 480/240/3/60 Transformer, s/n: 22040. Approx 7'x5'x7' and 4000lbs

Location: St Paul, MN

281.Marathon Model CVE 324TSTFPA14003AA L Electric Motor. 40HP, 230/460 Volt 3-Phase, Approx 27"x21"x16"
SA 7
282.(2) Safco 40 1/2"x29 1/2"x16 1/2" Flat Files
SA 5
283.(2) Items: (1) 24"x24"x32 1/2" Metal Stand with Plastic Top; (1) Plastic Drum Dollie
OUT
284.Conair Franklin Model 18207803 Media Hopper. Approx 200lb Capacity, s/n: D32604. Approx 32"x33"x68"
HM
285.(4) New Lumco Ball Nose Insert Cutters, No. BNKH, 1.50-1.50-6.50-4
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
286.(5) Renishaw Probe Tips No. A-5000-3709 Ceramic Shank .235", Ruby Ball Style
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
287.(7) Assorted Insert Shell Mills, (3) Approx. 3-7/16" Diameter x 1-5/8" x 1/2" Arbor, (4) Approx. 2-7/8" Diameter x 1-7/8" x 1/2" Arbor, Unknown Mfg.
Approximate Weight: 18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
288.Approx. (200) Assorted Carbide Inserts, Agi-VR / Wesson No. BB-83530VR1129, Alro Ind. No. 507-242, Seco No. LNKT060516PPTN-M06 and More
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
289.(3) Advantage Temperature Controllers for Parts: (2) Model S330-41C1 and (1) Model S-930-41C1. Approx 13"x30"x29" Each.
SA 6
290.Kent Model KGS-306AHD Surface Grinder. Hydraulic Machine, 12"x24" Rated Capacity, 21 5/8" Center of Spindle to Table, 26"x12 7/16" Max Surface Ground, 12"x1 1/4"x5" Wheel Capacity, Automatic Downfeed, Variable Table Speed: 16 to 75 FPM, 12"x24" Electromagnetic Chuck with Walker Chuck Control, Wheel Guard Dresser, Coolant Tank & Pump with Paper Filtration, 3HP 480 Volt 3-Phase, s/n: 890254-4. Approx 102"x64"x75" and 3700lbs

Location: Minneapolis, MN (Not Hoff Warehouse)

Video Available. Click on lot to view.

291.(2) Thermal Care Temp Controllers: (1) Model RA120804 and (1) Model RA090804Z. Approx 17"x40"x27" Each
SA 4
292.Wet Type Media Blasting Cabinet. 32"x20"X16" Inside, 110 Volt Motor with Pump, Approx 36"x24"x57"
HM
293.Titan XT330 Paint Pump with Hose & Spray Gun. 17"x20"x33"
OTHR
294.Assorted Components Including Valves, Bearings & Casters
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
295.Assorted Thread, Ring and Plug Gages
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
296.Assorted Circuit Breakers, Lock Out Tag Out Supplies, Power Supplies and More
Approximate Weight: 22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
297.(2) Milk House Style Heaters; Analog Clock
SIR
298.7 1/2X10 Screw Jack
SIR
299.Metal Rolling Glass Racks/Carts, 2 sided,
Overall Dimensions: 69" x 83" x 28"
OUT
300.1996 Ford F250 3/4-Ton Pickup Truck. 177,006 Miles, 7.5L Gasoline Engine, Automatic Transmission, 4WD, Extended Cab, Cloth Interior, PW/PL, Power Driver's Seat, Receiver Hitch, Electric Brake Control, Duel Fuel Tanks, 82" Box with Topper, Ball Type 5th Wheel Mount, Western 8' Snow Plow with Swivel, Ultramount Quick Attach System, VIN: 1FTHX26GXTEB50400

Video Available. Click on lot to view.
OUT

301.(2) Dumont Broach Sets, (1) 20 Piece 1/4" & 8mm, in Wood Case, (1) 16 Piece 3/16-2 HS, 6mm-C-1, 5/16-CHS with Wood Case
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
302.(2) New Fowler Chrome Flex Magnetic Base, Indicator Stand with Plastic Cases
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
303.(2) Machinest Tools, (1) Starrett Lock Joint Outside 18" Calipers, (1) General No. 17 Protractor
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
304.(1) 30 Taper Tool Holder Preset 3" x 3" x 3-1/2"
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
305.(3) Assorted Tools, (1) Ridgid Supreme Ball Bearing Drill Chuck Model 23T3, 0-1/2" Capacity with No. 2MT Shank, (1) R-8 Shank Tool Holder, 1-1/4" End Mill Type, (1) Insert Turning Cutter No. S-MWCNR123, 3/4" Diameter x 5-3/4"
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
306.Assembly Automation Industries Model SA 1M Bowl Feeder. s/n:NA, Approx 13" x 14" x 15".
Approximate Weight: 35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
307.(7) Ingersoll Model 6K4V02R03 Insert Type Milling Cutters.
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
308.(2) Sandvik p/n: 250 R114283-A Insert Type Milling Cutters.
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
309.(3) Mapal Tool Holders. (2) p/n: SA1242634R and (1) 30015324.
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
310.Withdrawn by seller. Crane impossible to remove without disturbing sprinkler lines
Floor Mount Jib Crane. 2000lb Capacity, 105" Under Jib, 12' Jib Length, 360 Degree Rotation with Stop Removed, Trolly, Approx 44" Diameter Base, 115" High. Note: Hoist not included.
311.(4) Mapal Tool Holders. (2) 19-27911-110295, (2) MN 5355-08-K.
Approximate Weight: 23lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
312.Approx. (16) Assorted Square Shank Insert Turning Cutters, No's Sandvik MDJNL-112-4B 3/4", Sandvik No. SCLCR-10-3 5/8" Square up to Sandvik No. DUTNL-16-3D 1.00" Square and More
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
313.(11) Mostly Lyndex NMTB 40 Taper Tool Holders, (7) End Mill 1/2" to 1.00", (2) MT No's 3&4, (1) Criter Adjustable Boring Head, (1) Lyndex Tapper with (4) Tapping Collets and (5) ER No. 40 Collets up to 5/16" Diameter
Approximate Weight: 35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
314.(2) Quick Change Insert Chamfer Cutters, MFG N.A., Body 2.835" x 1.81" Diameter Shank, 5-1/2" Total Length
Approximate Weight: 12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
315.(13) Assorted Square Shank Insert Turning Cutters, Includes Sandvik No. MUTNR-163C, Kennametal No. KTDL-854C, Valenite No. MDSNR123B and More, up to 1-1/4" Square Shank
Approximate Weight: 20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
316.(4) Sandvik 250R114277/A Insert Type Cutting Tools, HSK Taper.
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
317.(4) New Lumco Ball Nose Insert Cutters, No. BNKH, 1.50-1.50-6.50-4
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
318.(2) Renishaw Probe Tips, No. A-5000-3712 KD/WM, Ruby Ball Style, Total Length Approx. 4.250", Ceramic Shank
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
319.(2) Assorted Cutting Tools, (1) New Valenite No. MC1-3640 Tool Holder w/ 1-1/2" Diameter Shank, (1) Insert Extra Length Counter Bore w/ Coolant Thru, 8" Body Length x 1-1/4" Diameter x 1.575" Shank
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
320.Winona Van Norman Model 810820 Flywheel Grinder. 17 7/8" T-Slotted Table, 6" Grinding Wheel Capacity, 6 1/2" Max Under Wheel, Coolant, Table Guarding, Wheel Dresser, 5HP 230 Volt 3-Phase Motor and Controls, s/n: 7944. Approx 32"x36"x64"
West WHSE 2

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

321.Approx. (30) Assorted O.S.G. Drill Bits, .038" up to .142"
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
322.(1) New Valenite No. TL, SA-007034 Insert Side Milling Cutter, Approx. 5-3/4" Diameter x 1-1/8" x 1-5/8" Diameter Arbor
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
323.(5) Assorted Mostly New Swiss Type Collets, (2) SM No. 21 B&S, 29/64" Diameter, (1) S&M TF37, 1.009, (1) S&M #BS32B, 1.009, Carb Brushing, (1) Hardinge B30 Index, 1-1/32" Diameter
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
324.Assorted Guhring Coolant Through Taps Including: (10) Guhring 9.525 MM Taps, and (10) 3/8-24, 2B UNF Taps.
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
325.Brown & Sharpe Model 559-579-2 6" Dial Calipers .001" Incr. w/ Plastic Case
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
326.(6) Kennametal Insert Counter Bores, (5) No. SEF040060RSS075M, (1) Tungaloy No. T1DCF180-W32 Body, 1-1/2" Diam. X 1-1/4" Shank, Body .940" x 750" Diam. Shank
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
327.(3) Assorted Tools, (1) Kitagawa 8" CNC Bolton Chuck w/ 3-Jaws No. 0B208, 1-3/4" Diameter Hole Thru, (1) 10" Diameter Slotted Face Plate, Screw on Type, 1-3/8" Diam. Hole Thru, (1) Steel Fixture Stand, 8" x 5-1/4" x 4-3/4"
SA 7
328.(1) Valenite SA-10072024 8" Insert Type Cutters with 2 1/4" Bore
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
329.Mapal 315mm Insert Type Aluminum Body Cutter
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
330.Assorted Bender Tooling
HM
331.(6) Insert teyp Shell Mills. 4" to 8" Diameter
Approximate Weight: 51lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
332.(3) Aluminum Body Insert Type Shell Mills. 4" to 5" Diameter
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
333.(5) Komet UA0115311 1 1/4" Diameter Shanks
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
334.(5) Assorted Insert Type Shell Mills, 5" to 5 1/2" Diameter
SIR
335.(3) Aluminum Body Insert Type Shell Mills
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
336.(7) Assorted CAT 50 Taper Tool Holders, (1) No. 3 MT Type w/ Albreight 0-3/8" Keyless Chuck, (1) Sandvik No. A390.45-563050, Lendex No. C5006-0625EM Type and More
Approximate Weight: 45lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
337.(13) Assorted Cincinnatti Type Mono Set ICH Collets up to 3/8" Diameter
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
338.(6) Insert Type Cutters, Approx.1-1/2" Arbor Hole, Approx. 6" Dia. Cutting Surface From 1" Up to 1-1/4", Including (3) Valenite VMM-50-4-0612, (1) Safety P342 MV 0002, (1) Safety P342MV0001.
Approximate Weight: 37lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
339.Collapsable Plastic Gaylord, Internal Dimensions Measure 44"x41"x19".
HM
340.Atlas Copco Model LE11 Air Compressor. Reciprocating Type, Approx 60CFM, 145psi Max Pressure, 80-Gallon Horizontal Receiver Tank, 15HP 230/460 Volt 3-Phase Motor, s/n: AML264955. Approx 67"x30"x59"
West WHSE 2

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

341.(9) Insert Type Cutters, 1-1/2" Arbor Hole, Approx. 6" Dia, Cutting Surface From Approx 3/4" Up to 1". Includes (3) Valenite VMM-50-4-0612, (3) Safety P342 MV0002,(2) Safety P342MV0001, and More Shown.
Approximate Weight: 57lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
342.(7) Assorted Thermometers up to 12" Length with Plastic Case
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
343.Hilti Model TE5 Hammer Drill with Keyless Chuck, 115 V, AC 50-60 HZ, 4.6A, Steel Max 1/2", Concrete Max 3/4 with TES-DRS Guide and Carrying Case
Approximate Weight: 26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
344.Weldon 4C Collet Tap Sharpening Fixture, Approx. 9-1/4" x 12-1/2" x 9-1/2"
Approximate Weight: 41lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
345.Approx. (54) Piece 5/8"-11" Hold Down Set, Mfg. N.A., 16" x 4-1/4" x 8-1/8"
Approximate Weight: 30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
346.Over (30) Assorted Machinest Tools Starrett No. 494-A Locating Buttons, Plus Gages, Tap Handles, De-Sta Clamps and More
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
347.Bosch Model 11310EVS with (6) Bits and Metal Carrying Case, 115 V, 60 HZ, 950 W, Serial No. 580A3220345
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
348.(3) Insert Type Cutters, Approx. 1-1/2" Arbor Hole, Approx. 6"Dia, Cutting Surface From 3/4" Up to 1", Including: (3) VMM-50-4-0612RA, (1) Kennametal K555600ASD43L750, and More Shown.
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
349.Rubber Belt Conveyor with Adjustable Height Frame. 23" Belt Width, 70" Run, Variable Speed, 110 Volt, Approx 32"x72"x49"
OTHR
350.2001 Chevrolet 1-Ton Truck. 152,479 Miles, 13,500lb Gross Combined Weight Rating, 5.7L V8 Gasoline Engine, 4-Speed Automatic Transmission, Dual Rear Wheels, Air Conditioning, Cruise Control, AM/FM Radio, Cloth Seat, Supreme "Access" Body, 94"x131"x82" Cargo Area, 42"x76 3/4" Rear Door, 28" Wide Sliding Side Door, Interior Flurescent Lights, LED Tail and Marker Lights, VIN: 1GBJG31R611138267

Video Available. Click on lot to view.

351.Assorted Pallet Rack Components In Different Styles Including: (2) 42"x16' Uprights; (1) 44"x16' Upright; (4) 44"x10' Uprights; (3) 38" Uprights 10' to 16' Long; Assorted Beams up to 100"; Wire Deck Panels
OUT

Fork Lift for Hire has quoted $125 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

352.Positioning Fixture. 27" Spread of Wheels, 16" Between Axle Centers, Pneumatic Tilt Cylinders, 3/4HP 208-230/460 Volt 3-Phase Motor, Approx 34"x60"x47"
SA 7

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

353.Jorgensen Chip Conveyor. 6" Wide Belt, 21"x78" Collection Area, 46" Exit Height, 1/3HP 208-230/460 Volt 3-Phase Motor, Approx 24"x129"x64"
SA 7

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

354.(5) Renishaw Probes No. A-5000-3709, (ES) Ceramic Shank, Ruby Ball Style .235", Length 2.268" Total
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
355.Approx. (60) Assorted HSS and Carbide Tipped End Mills / Cutters
Approximate Weight: 12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
356.(2) Ingersol 7-7/8" Diameter Insert Milling Cutters, 20 Tooth, 1-7/8" x 1-1/8" x 2" Arbor
Approximate Weight: 29lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
357.Approx. (65) Assorted HSS Drill Bits, Reamers, Core Drills .160" up to .400"
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
358.(2) Guhring GM300 HSK-C 40 Endmill Holders.
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
359.(3) Sandvik HSK Holders. (2) 250C114280-1 (1) 250-R114284-B
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
361.(2) Adaptive Technologies p/n KM40RCMIVDI4012 Clamping Units.
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
362.(3) Kennametal KM40MDVNL4 HSK Insert Type Cutters
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
363.Approx. (30) Form Tool Technology Flat Bottom Drill Bits, Approx. .253" Diameter
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
364.(12) Assorted HSS Form Cutters, (5) CT Tool & Cutter Co. No. CNT-34-026-0002, (6) F&D Tool Co. No. CNT-34-026-0002, (1) Wetmore No. C-NT-34-026-0002
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
365.Yale Electric Chain Hoist. 1/2 Ton Capacity, Trolly, Swivel Hook, Pull Rope Control, 230/460 Volt 3-Phase
SA 6
366.Assorted Items: Approx (19) Pieces 7"x18 1/4" Steel Channel; Misc Fasteners and PVC Fittings
SA 6
367.(7) 3" Insert Type Shell Mills
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
368.Approx (18) Assorted Shrink Fit Type HSK Shank Tool Holders
Approximate Weight: 75lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
369.(7) Assorted Hydraulic Cylinders
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
371.(8) Assorted 2 1/4" to 3" Diameter Insert Type Shell Mills
Approximate Weight: 19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
372.New, Ingersoll 6K2A04R01 93288D 4" Insert Type Shell Mill
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
373.(2) Ingersoll 6W5B03R10 3039973-A Insert Type Shell Mills, (1) Never Used
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
374.Assorted Shelving Components: Approx (39) 75" Long Legs; (52) 23 1/2"x36" Shelves; Support Clips
OUT
375.Tigerstop Automatic Stock Stop and Pusher. 10' Stop Travel, Control, 110 Volt, Approx 144"x15"x4"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

376.Tektronix Model T922 15MHz Oscilliscope. 7"x21"x11"
SIR
377.Assorted Insert Type Shell Mills and More. Mitsubishi ASX400R 4", Sandvik RA300-063R19-13H and Carr 2379-CM100620.
Approximate Weight: 12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
378.Pneumatic Screw Driver.
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
379.(4) Cat 50 Taper Tool Holder Including: Briney V50BR-20-600, Valenite TAP3115150CAT and (2) Unknown.
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
381.Assorted HSK Tooling.
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
381.1.124"x48"x96" Metal Rack.

Locatoin: Cambridge, MN

382.(5) Extra Length Cat 50 Taper Endmill Holders Including: Precision Components .250PTD=6, .750OTD-6 and (2) .312TD-9.
Approximate Weight: 30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
383.Metal Frame Bench with Wood and Plastic Top, Light Rack and 6-Locker Unit. Approx 60 1/2"x34"x83" (Bench) 12"x18"x72" (Locker)
OUT
384.Assorted Pneumatic and Solid Wheels
SA 5
385.(2) Metal Rolling Glass Racks/Carts.
Overall Dimensions : 69" x 83" x 47' ea.
OUT
386.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100727-2. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

387.(3) Sandvik 250R114282/C Insert Type Cutting Tools, HSK Taper.
Approximate Weight: 16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
388.Approx. (25) Sets of 10 Insert Holders For Insert Type Cutting Blades, P342MV0001, UTS-24521.
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
389.(5) Sandvik 250R114284/B Insert Type Cutting Tools, HSK Taper.
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
391.(3) Sandvik 250R114283/A, Insert Type Cutting Tools, HSK Taper.
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
392.Approx. (37) Niagara Cutter Four Flute Single End HSS End Mills, .280" Diameter, .375" Shank
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
393.(12) Assorted Carbide Tipped Straight Shank Drill Bits with Coolant Thru, (5) Hannibal No. 2036-8712, .580" Diameter x .689" Shank Diameter, 4" Length, (3) CJT No. 0237426-Rev. O, Size .2420, (4) Mfg. N.A. Approx. .244" x 8" Length
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
394.Approx. (47) Ingersol Carbide Diamond Tipped Inserts No. PYE-43R003-S-IN90D
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
395.(16) DoAll 1/2" M42 HSS Tool Bits, 4-1/4" x 1/2" x 1/2"
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
396.(12) Assorted Side Milling and Dove Tail Milling HSS and Carbide Tipped Cutters, (7) Lexington 1.00" x .140" x 1/2" Shank, (1) .781" x .215" x 1/2" Shank, (1) Moon No. B34-123-9037, .469" x .032" x 3/8", (3) Moon No. DT5008-45, 1/2" x 1/8" x 3/8", 45 Deg.
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
397.(4) Parlec Model C50-77TR4C Cat 50 Taper Tap Holders with Extensions.
Approximate Weight: 45lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
398.(6) Assorted Cat 50 Taper Tool holders Including: Command C6H4-1420, (1) M/2045/0071, and More.
Approximate Weight: 45lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
399.(5) Assorted Cat 50 Taper Tool Holders Including: Universal Eng. 463647, Command C6A5-1375, C6T4-0001 nd More.
Approximate Weight: 59lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
401.New, Ingersoll 57K6A0520R02 L-9811322 Insert Type Straddle Mill. 5 1/2" Diameter
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
402.(2) Valenite 5 1/2" Diameter Insert Type Cutters with 2" Bore
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
403.Assorted Cutters and Tooling
Approximate Weight: 40lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
404.(4) 4" Diameter Insert Style Cutters Including (2) Valenite TL#ST-33841
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
405.Approx. (20) Carbide Tipped, Calenite VRS13681 Slitting Saws, 2" Arbor Hole.
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
406.(2) Horn 002.0100.0919, STN 003209-1, HSK-A100 Tool Holders, Approx. 1-1/4" Arbor w/ Key.
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
407.(3) Sandvik 250R114282/C Insert Type Cutting Tools, HSK Taper.
Approximate Weight: 16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
408.Assorted Valenite and Taeguetec Insert Type Cutting Tools Including: MCLNL-16-5D, MCLNL-25CA19, SDACL 103B, STFCR 12CA16 and More.
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
409.(2) Ingersoll Rand Model 6K5A04R19 Insert Type Shell Mills.
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
411.(3) Ingersoll Rand Indexable Milling Cutters. (2) 8K2A-02R25, (1) 6K4V03R02.
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
412.Coditherm Thermal Printer Controller. Approx 19"x20"x7"
Approximate Weight: 40lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
413.(2) DiJet Type Insert Facing Shell Mills, Approx. 6-1/2" Diameter x 2.00" x 1-1/2" Arbor, 14 Tooth
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
414.Approx. (85) Assorted Ingell Cutting Tools, Carbide Inserts, No's XFEB300578R.P, LPE324-03, DFM213R001 and More
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
415.Approx. (120) Assorted Komet, Micro No's, Komet W29-24010.0462, W29500300403, Micro No's TA2 and More
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
416.(6) Insert Type Cutters, Approx. 1-1/2" Arbor Hole, Approx. 6" Dia, Approx. 1" Cutting Surface, Including: Valenite VMM-50-4-06121A, Safety P 342 MV 0002.
Approximate Weight: 36lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
417.(7) Ingersoll Insert Type Cutting Tools, Shank Dia. From 1" Up to 1-1/2", Including: (2) 15C1J-34026N0R10, (2) 55C1J-03026N0R10, (1) 15LID-2203780R10, (2) 15C1G-2502086R10.
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
418.Assortment of Machine Parts, Including: Approx. 19-3/4" Lathe Face Plate, Pneumatic Cylinders, and More Shown.
SIR
419.Approx. (200) Assorted HSS Extra Long Drill Bits, up to .148" and Center Drills, No. A220/N-1
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
421.Approx. (70) Assorted HSS Taps from 10-24NC up to M16 x 1.5.
Approximate Weight: 12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
422.Approx. (150) Merit 1"x1" Spiral Wound Abrasive Bands, 8- Grit.
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
423.(4) Insert Type Turning Tools with Capto Style Shank
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
424.(6) Assorted Capto Shank Tool Holders
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
425.(6) Assorted Insert Type Shell Mills from 4" to 5" Diameter
Approximate Weight: 40lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
426.(7) Assorted Insert Type Shell Mills from 2" to 4" Diameter
Approximate Weight: 19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
427.(2) Ingersoll 5" Insert Type Shell Mills: (1) New, 6K5V-05L01 and (1) Used, 6K5V-05R01
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
428.(4) 5" Diameter Insert Type Shell Mills, (1) Ingersoll Brand
Approximate Weight: 32lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
429.Assortment of Hex T-Keys, and More Shown.
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
431.Assortment of Sunnen Hone Stones, and More Shown.
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
432.Approx. (40) Assorted Taps, from M12-6HX up to 1/2" - 14 NPSF.
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
433.Assembly Automation Industries Model SA 1M Bowl Feeder. s/n: 03986278, Approx 13" x 14" x 15".
Approximate Weight: 65lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
434.Crate full of Assorted Electrical Components Including Breakers, Boards, and More Shown.
HM
435.(3) Assorted Insert Type Shell Mills, (2) Seco No. R220.74-06.00-12, Approx. 6-1/2" x 2-1/2" x 2.00" Diameter Arbor, (1) Valenite No. 539.11.208, 6" x 2-3/8" x 2.00" Diameter Arbor
Approximate Weight: 35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
436.(4) Gleason Gear Hobs, GCT Part #'s SHTI-1, ID-46164-000-4, TV-00437-26, TV00437-017.
Approximate Weight: 38lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
437.Crizaf Model LR-18-2-4 Rubber Belt Conveyor. 18 1/2" Belt Width, 70" Run, Adjustable Rolling Frame, Dayton Variable Speed Motor and Dart Control, 120 Volt, s/n: CE-3340. Approx 72"x27"x47"
OTHR
438.(3) MetalGlass Racks With Rubber Pads.
Overall Dimensions: 83" x 85" x 30".
OUT

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

439.Aluminum Frame Laminate Wood Rolling Table. 30"x24"x39 1/2"
OTHR
441.(4) Heat Guns: (1) Weller and (3) Master
SIR
442.(2) Tubs with Plastic Parts Trays. Tubs Not Included
SA 5
443.(8) Insert Type Cutters, Approx. 1-1/2" Arbor Hole, Mostly Approx. 6" Dia, Cutting Surface From Approx. 1/2" Up to 1-1/4", Including Safety, Valenite, and More Shown.
Approximate Weight: 53lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
444.Approx. (30) Carbide Tipped, Calenite VRS13681 Slitting Saws, 2" Arbor Hole.
Approximate Weight: 27lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
445.(1) Ingersoll Aluminum Shell Mill Insert Type No. GX2V-05R01 / 3033001, Max RPM 20,000, 5" Diameter x 2-3/8" x 1-1/2" Arbor, (10) Tooth with Approx. (47) Ingersoll No. PYE-43R003-S-IN90D, Diamond Tipped Carbide Inserts
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
446.Approx. (38) Assorted Carbide Cutters, (12) Grinding Specialties Slot Cutters No. BNT34-331-5017, 2.005" x .312" x 3.12", End Mills up to .218" Diameter x .250" Shank, Drills up to .138"
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
447.Assorted 2"to 4" DC Fans
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
448.(4) Command ER-20 Extended Length Collet Holders.
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
449.Kurt Specialty Vise Jaws.
Approximate Weight: 20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
451.Kurt Quick Change Tool Holders From .625 Up to 1.250, Includes Extra Parts.
Approximate Weight: 35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
452.(8) Cat 50 End Mill Tool Holders, From Approx. 7/8" Dia. Up to 1-1/4" Dia.
Approximate Weight: 70lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
453.(6) Assorted Cat 50 Taper Tool Holders Including: (3) with Adjustable Boring Heads, (1) Schunk 28000185, Command C6T4-0001 and More.
Approximate Weight: 64lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
454.(6) Assorted Cat 50 Taper Tool Holders Including: Universal Eng. 463647, Command with Tapmatic AS6 Tapping Spindle, Erickson C-152530 and More.
Approximate Weight: 70lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
455.(22) Insert Type End Mills, Mostly 3/4" Diameter Shank, Cutting Heads from Approx. 7/8" up to Approx. 2".
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
456.Assortment of HSS Drill Bits from .199 up to .4688.
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
457.Datalogic Model Gryphon M100 Barcode Reader with Charging Station, Manual and Software.
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
458.Approx. (150) Assorted Cutting Tool Inserts, Including Kennametal, Sandvik, Ingersoll, Wohlhaupter, and More Shown.
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
459.(4) Ingersoll Rand Model 6K2A02R21 Indexable Milling Cutters. (3) Like New and (1) Used.
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
461.(3) 50-Taper Tool Holders: (1) Boring Head Style witn No Flange; (1) Cat Flange, with 4" Shell Mill; (1) Cat Flange with (2) 6" Insert Cutters
Approximate Weight: 62lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
462.(6) Assorted HSK63 Tool Holders: (4) Hydraulic Clamping End Mill Style; (2) With 5" Insert Style Cutters
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
463.(6) Assorted End Mill Style Cat 40 Tool Holders up to 1 1/4" Capacity
Approximate Weight: 19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
464.(8) Assorted Cat 40 Tool Holders: (1) Tapping Type; (2) Shrink Fit; (1) End Mill Style with Collet Adapter and More
Approximate Weight: 22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
465.(7) Assorted Insert Type Chamfer Cutters. 3/4" to 1 1/2" Diameter Shanks, up to 8 1/2" OAL
Approximate Weight: 16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
466.Assorted End Mills and Related Items Including: (3) End Mill Extensions; (2) Ball Nose Roughing End Mills; (2) Ball Nose Insert Type; (2) HSS Square and (4) Insert Type Square
BC
467.(6) Fette Ingerchangeable Tip Tools: (3) Nr. 17 and (3) Size No. 4-C
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
468.(15) Assorted Insert Type End Mills, Mostly 1" Shank Diameter.
Approximate Weight: 12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
469.(3) Assorted Insert Shell Mills, (1) DiJet No. SMC4008-10689, 8-Tooth, 4-3/4" Diameter x 2-3/8" x 3/4" Arbor, (1) DiJet No. SMC6012-11281-SN-37101, 6" Diameter x 2-1/4" x 3/4" Arbor, 12-Tooth, (1) Mfg. Unknown, 6" Diameter x 2-1/4" x 3/4" Arbor, 12-Tooth
Approximate Weight: 38lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
471.(7) Assorted Kennametal Type ER40 Collets, up to 7/8" Diameter
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
472.(23) Erickson Type ER32 Collets, 1/4" up to 3/4" Diameter
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
473.Approx. (28) Assorted Form Cutters, HSS and Carbide Tipped, Carbide: .875" Diameter x .625" Shank Diameter, HSS: .781" Diameter x .625" Shank and More
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
474.(8) Cat 50 End Mill Tool Holders from Approx. 3/8" Up to Approx. 1-1/8" Dia.
Approximate Weight: 71lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
475.(6) Assorted Cat 50 Taper Tool Holders Including: Command C6H4-1420, (2) Precision Components Cat-50-.250TD-6, (1) Komet A5210350 and More.
Approximate Weight: 46lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
476.(6) Assorted Cat 50 Taper Tool Holders Including: Erickson Tool C152538, C152530, Command C6A3-1375, And More.
Approximate Weight: 45lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
477.(6) Assorted Cat 50 Taper Tool Holders Including: Command C6F4-1250, Rigibore and More.
Approximate Weight: 40lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
478.(15) Assorted Erickson Type ER Collets, (1) ER25, 5/16" Diameter, (8) ER20's up to 3/8" Diameter, (6) ER16's up to 5/16" Diameter
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
479.(13) Assorted Erickson Type Double Angle Collets, (2) DA200 up to 1/4", (8) DA200 Collets up to 1/2", (3) DA180 Collets up to 3/4" Diameter
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
481.(6) Assorted Cat 50 Taper Tool Holders Including: Ingersoll C50-14AA200, C50-05MT231 and More.
Approximate Weight: 46lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 1
482.(2) New DiJet Insert Shell Mills, (1) No. SMC 5.010-10438/8-35-895, Ten Tooth, 5" x 2-3/8" x 3/4" Arbor, (1) No. SMC6012-11488, Serial No. 3730, 6" x 2-3/8" x 3/4" Arbor, Twelve Tooth
Approximate Weight: 25lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
483.(12) Assorted Insert Type End Mills. 1" to 1 1/2" Diameter, 4" to 9" OAL
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
484.(5) New, Cogsdill B-10960 "Burraway" Deburring Tools. 1" Straight Shank, 7" OAL
Approximate Weight: 20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
485.(5) Assorted Thread Mills: (1) HSS; (1) Insert With 1 1/2" Shank and (3) Insert Type with 1" Shank
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
486.(3) 3/4" Shank Insert Type Thread Mills, 3 1/4" to 4" Long
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
487.(9) Insert Type Chamfer Cutters. 6 1/2" OAL, 1 1/2" Shank
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
488.(5) New, Cogsdill B-10960 "Burraway" Deburring Tools. 1" Straight Shank, 7" OAL
BC
489.Approx. (64) Assorted HSS End Mills, (7) Niagara 4 Flt., 5/8" Diameter x 5/8" Shank, (17) Brabaker Tool 4 Flt., 1/2" Diameter x 1/2" Shank, Both Single End, (11) Niagara 4 Flt. End, .285" x .375" Shank and .280" Diameter x .325" Shank and More
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
491.Ingersoll Shell Mill w/ Inserts, (1) Shell Mill No. 6X2V-05R01/3032122, Balanced @ 3,000 RP<. Max RPM 20,000, Approx. 5" x 2-3/8" x 1-1/2" Arbor, 10 Tooth with (59) Diamond Tipped Carbide Inserts No. PYE-43R002
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
492.(2) Knu-Vise V-800 Holding Clamps, Adjustable Clamping from 1-1/2" up to 4-1/2".
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
493.(12) Insert Type End Mills, (4) 1" Shank Diameter, 8-1/4" Shank Diameter, Cutting Surface from Approx. 1" up to 2".
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
494.Approx. (50) Assorted Taps, from M5 x 0.8, up to CM36 x 1.5.
Approximate Weight: 12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
495.Approx. (75) Mostly Albert Webber Mfg. Co. HSS Taps, from 7/16" - 5/8" up to 11/16" - 1" .
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC4
496.(6) Insert Type Boring Bars, (2) 1/2" Diameter Shank, (4) 3/4" Diameter Shank.
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 3
497.Assortment of Components; Bearings, Oil Seals, Gaskets, Belts, Way Wipers and More
SA 4
498.Hundreds of Assorted Carbide Inserts, Seal Rings and More
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
499.(2) Assorted Insert Type Shell Mills, (1) Seco No. R220, 7406.00-12, 6-1/2" Diameter x 2-3/8" x 2.00" Diameter Arbor, 10 Tooth, (1) Valenite No. 539.11.208, 6" x 2-1/2" x 2.00" Arbor, 9 Tooth
Approximate Weight: 22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
500.Wall/Post Mount Jib Crane. 500lb Capacity, 201" Useable Jib Length, Brackets not Included
501.Guhring Reamers, FV00199, .500 PCD TIP , Coolant Through.
502.RobbJack, 4" dia. Solid Carbide Saw Blade, #C40-0625-32-36 ,36 T, 1" Arbor, 4x.0625x1, Approx. (14)
503.Valenite Carbide Insert Cutters, VA10043, Approx (60)
504.Bates Honing Stones, 1031177, Rough, Approx. (40)
505.Bates Honing Stones, JN 340201, Semi-Fine, Approx. (130)
506.Metro DataVac Pro 2, Model: MDV-2, 120V, 6.5A, 15" x 7" dia. (approx).
507.Red Devil Lid Press, 5080, 16" x 9" x 13".
508.Fairbanks Scale, Model: SCB-R9000-14AD, Cap.: 60/150 max.-.02/.05min. Table: 14" x 14", w/level.
509.Heath DC Power Supply, Model: 2672, 120/240VAC +/- 10%, 50/60 Hz, 180 Watts Max., 6" x 8" x 9".

Destron Technologies-Portable Tranceiver, Model:20015-150, 10" x 4" x 3" .
511.WEN 3" Belt Sander, Model: 910, 115V, 50/60 CYC. AC, 4-1/2 amp.
512.Black & Decker Porto-Shear, 12 ga, Cat.No: 507, 115v, 5.3a, Type A, S/N 3623121.
513.(4) Casters, (2) lock/swivel, (2) Stationary, 5" x 1-1/4" Wheel.
(4) Adjustable Feet, Length: 7", Base: 1.75" , Thread 12-1.75 approx.
Cutting Torch with Misc. Tips and Strikers in Toolbox.
514.Hercules Oil Changer, 1 gal. (approx.), 13" x 17"
515.Superior Gear Box (3), Worm Gear reducer, Model: BMQ-063, Ratio: 15, Input: Nema 56C, Output: Hollow Shaft 1.125", Flange Dia: 6.50", Bore: 0.625, Universal Mount, 8-1/2" x 6" x 7" approx.
516.Assorted electric Motors (5),
(1)Baldor, 3Phase, 3/4hp, Shaft: 5/8" approx. (1)Dayton, 1/4hp with speed Reducer. (1)Franklin Electric, 1/3hp with Pully, (1)Baldor Pump, 3 Phase, 3hp, Input/output: 2" (approx). (1) Servo Motor, 1" shaft.
517.Olympus SZ 6045 Microscope w/ 0.5X Olympus Lens WD186, Attached to Telescoping Mount.
518.Assorted Electrical.
Approx. (10) Twist Lock, 3-Wire single Outlets, 10/15 amp., 250/125 V. (3) Time Control Switch/Box: AMF Model: 4003-00, 8" x 4" x 3", AMF Model: 7008-00, 11" x 7" x 3", Dayton Model: 2E024A, 6" x 5" x 3", (2) Wire W/ 3-prong Plug, 8ft. total (approx). (2) Metal Bases with Rubber Feet, 14" x 19".
519.(5) Assorted Oilers, (2) Chemque Q-Seal 2905, Poly Detector Loop Sealant, 30 oz. Tubes, unopened.
521.(3) Dorner Conveyors: (1) 12"x72" No Motor; (1) 2100 Series, 8" Wide Belt, 5' Long; (1) 2100 Series, 18" Wide Belt, 48" Long with Stand
OTHR

Fork Lift for Hire has quoted $30 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

522.Approx.(100) Assorted Carbide Inserts, Partial boxes include Ingersoll, Sandvik, Kennametal, and more.
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
523.Approx.(100) Assorted Carbide Inserts, Partial boxes include Ingersoll, Valenite and more.
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
524.Approx.(100) Assorted Carbide Inserts, Partial boxes include Kennameta, Sandvik, and others.
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
525.Approx. (28) TG 150 Erickson Type Collets 1/2" - 1-1/2" .
Approximate Weight: 32lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
526.Agilent 16702B Logic Analysis System, 12" dia. Touchscreen Dislpay, Powers up. Overall Dimensions: 9" x 17" x 22".
Approximate Weight: 44lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Table 5
527.Renishaw PHC9 MK2, Probe Head Control Unit with PSU9 Power Supply Unit. 5" x 10" x 8" .
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
528.(4) 1" Straight Shank HSS Drill Bit, Length: 11-1/2"
(1) #3 Morris Taper 13/16" HSS Drill Bit, Coolant Through.
(1) TCT Reamer, 1.062 x 998 x 11.25.
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
529.(5) Mapal Adapter W/ HSK-A63 Shank, (NEW)
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
531.Mapal Adapter with HSK-A100 Shank
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
532.Kennametal HSK-A Hydraulic Expansion Chuck, HSK 100AHC12095M
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
533.Approx. (90) Command No. RB4E-0100
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
534.(6) Superior Tool Carbide Tipped Slot Cutters No. B-34-119, Approx. 3" Diameter x 3/8" x 1.00" Arbor and (2) Radius Inserts, Mfg. N.A., No. EI000234, Approx. 3.00" x 5/8" x 2-1/4"
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
535.(3) Assorted Insert Shell Mills, (1) Carboloy No. R220.33/69-05.000I, Approx. 5" x 2-3/8" x 1-1/2" Arbor, 10 Insert, (1) Love Joy No. 4.CCBNR6-15/07-00244-01-00, 8 Insert
Approximate Weight: 16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
536.Approx. (30) Assorted Mostly E-Z Burr Deburring Tools, (5) No. SEZ-2958, (8) 37/64, (7) 1/2" and More
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
537.Wilton 6" Quick Action Vise Model 1206
Approximate Weight: 47lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
538.DLI Hammer Head XRT Walk About Computer with Accessories, Scree 8-1/2" x 6-1/2", Power Pad with Manual, Plastic Form Fitted Case, Approx. 21" x 17" x 9"
Approximate Weight: 22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
539.Valenite Type CAT 50 Taper Boring Bar, Adjustable, 11-1/2" Bar
Approximate Weight: 23lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
540.Dennison Model A Hydraulic Press. 1-Ton Capacity, 4 1/2" Throat, Approx 1" Stroke, 10"x7 1/2" Bed, Metal Stand, 3/4HP 115 Volt Motor, s/n: 3597. Approx 36"x22"x64"
West WHSE 2

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

541.Approx (13) 24" and (2) 12" Pallet Rack Protectors
OUT
542.Assorted Items: Vacuum, Conveyors, Uline Sealer, Hose and More
SA 7
543.(2) Fellows Paper Shredders: (1) Powershred 420C and (1) Powershred 320
SA 6
544.Assorted Items: Pneumatic Press; Custom Machine and More
SA 6
545.Jorgensen Chip Conveyor. 12" Wide Belt, 12"60" Collection Area, 41 1/2" Exit Height, 3-Phase Motor, Approx 138"x26"x58"
SA 7

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

546.Fairbanks Platform Scale. 1000lb Capacity, 18"x27" Platform, Complete Weight Set, On Wheels
OTHR
547.Pha-Sep Oil/Water Seperator with Tank
SA 6
548.Aircel Model DHT-100 Refrigerated Compressed Air Dryer. 100 CFM Capacity, 115 Volt, s/n: H1DFPG1542. Note: No Refrigerant, Bad Compressor. Approx 36"x26"x30"
SA 7
549.Module-Air Pneumatic Cable Hoist. 300lb Capacity, Trolly, Pendant Control
SA 6
550.Contrx Cranes Wall/Post Mount Jib Crane. 1/2-Ton Capacity, Approx 17 1/2' Useable Jib Length, Wall Brackets Included.
Dock

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

551.Approx 25-Gallon Receiver Tank with Assorted Pneumatic Components. Approx 40"x18"x27"
SA 6
552.Fanuc System 6M CNC Control. Approx 27"x30"x60"
SA 6
553.Hydraulic Power Unit with Approx 7 1/2 HP 3-Phase Motor. 59"x30"x61"
HM

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

554.Anderson Hickey 4-Drawer File Cabinet. 15"x25"x52"
SA 5
555.Porta-Blast Blasting Cabinet. 32"x22"x16" Inside, Guns, Gloves, Rolling Stand, Approx 35"x24"x54"
OTHR
556.(16) Guhring GM300, HSK-A63 Tool Holders
Approximate Weight: 40lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
557.Approx (24) Guhring GM300, HSK-C 50 Tool Holders
Approximate Weight: 34lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
558.(13) Guhring GM300, HSK-A 63 Tool Holders and (2) Guhring GM300 HSK-C 63 Tool Holders
Approximate Weight: 38lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
559.(10) Gewefa HSK-A63 x 22 x 100, 93.02.036.302, Reducing Adapter
Approximate Weight: 30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
560.Air Mite Pneumatic Press. Approx 1 1/2" Stroke, Foot Control, Stand; Power Tool with Custom Fixture
East WHSE
561.Approx. (10) HSK Reducing Adapters.
(5) Gewefa HSK-A63 x 16 x 60, 93.02.036.004
(5) Gewefa HSK-A63 x 63 x 100, 93.02.036.301 .
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
562.(4) Gewefa HSK-A63 x 22 x 60, 93.02.036.205, Reducing Adapters; (1) Gewefa HSK-A63 x 32 x 60, 93.02.036.007 and (1) Seco, E9304 5524 22136, epb 3g x mm/kg.
Approximate Weight: 16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
563.(10) CAT Style 40 Taper Tool Holders. Including but not limited to: Techniks, Valenite, Dihart, etc
Approximate Weight: 31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
564.(10) Guring GM300, HSK-C40 57 08 04, Code 4367 12.040 Tool Holder
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
565.(2) Tubs and (1) Skid with Thousands of Plastic Tray Dividers. Tubs Not Included
SA 5
566.HINIKER Snow Plow with Hiniker Quick-Hitch Mounting System. I.D. # 2851-P, Blade: 102" x 29"
OUT

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

567.Baldor Single End Grinder. 12" Wheel Capacity, Wire Wheel Installed, Custom Fixture, 230 Volt 3-Phase Motor, Approx 64"x29"x60"
HM

Fork Lift for Hire has quoted $40 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

568.Pump and Filtration System with 3-Phase Motor, Approx 40"x16"x48"
SA 4
569.Cyclone Blasting Cabinet. Approx 32"x20"x16" Inside, Gun, No Gloves, Approx 36"x24"x60"
HM
571.Grizzly Model G1019 Band Saw. 12 1/2" Throat, 12" Under Guides, 14"x14" Slotted Tilting Table, Single Speed Machine, Mobile Base, 3/4HP 110 Volt Motor, Approx 26"x26"x74"
OTHR
572.Vibratory Feeder with Hopper. 110 Volt, Approx 13"x17 1/2"26"
SA 8
573.(5) Stackable Metal Racks Approx 13" x 45" x 12ft.
OUT

Fork Lift for Hire has quoted $100 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

574.2-Level Fixture Bench with Sled on Upper Level. 102" Longitudinal Travel of Sled, Less Than 1/4" Cross Travel, 28"x15 1/4" Mounting Plate on Sled, 120 3/4"x16" Lower Level Area, Approx 121"x30"x45 1/2" Overal Dimensions
West WHSE 1

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

575.Approx (8) Outdoor Light Fixtures
SA 5
576.Assorted Plastic Storage Bins, Many Akro Type. Metal Frame Tub Not Included
SA 5
577.2-Wheel Cart Mounted Transformers and Switch. Marked "460 Volt Only"
OTHR
578.Assorted Electrical Items: Outlet Strips, Capacitors, Fans and More
SA 5
579.Dozens of 3" Metal Casters with 3"x4" Mounting Plates
581.Metal Bench with (3) Drawers, Lower Shelf and 24-Drawer Organizer. 72"x34 1/4"x34 1/2"
HM
582.Governor Double Body CO2 Regulator
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
583.Metro Wire Cart with Lower Shelf. 35 1/2"x24"x40"
584.Assorted Metal Racking. Including Approx. (9) Uprights- (2) 10' ,(4) 15', (3) 17' Heights, 44" Depth.
Approx (80) Shelf supports. Length: Approx. 9'.
OUT

Fork Lift for Hire has quoted $125 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

585.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-3. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

586.(3) Spools of Wire: (1) Braided Steel Rope, Approx 1/8" Diamete,r (1) 6-Conductor Cord, (1) Heavy Duty Stranded Wire, Approx 1/2" Overall Conductor Diameter
SA 4
587.Pallet of Assorted Items Including Heat Exchangers, Mootr, Electrical Supplies and More
SA 5
588.Assorted Items: Air Cleaner, Fire Fighting Valve, Light and Roller
SA 5
589.(2) Plastic Toolboxes with Custom Coils
SA 5
591.Heavy Duty Fixture Table. 96"x30" Surface Area, 28 1/4" Surface Height, Metal Stand, Partial Aluminum Fixture, Approx 96"x30"x51"
West WHSE 1

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

592.Elite Screen Printer. 15"x15" Frame Size, 23"x46"x20" Overall
SA 5
593.Lincoln Idealarc Model R#S-325 Constant Voltage Arc Welder. 350 Amp 33 Volt Rated Output @ 60% Duty Cycle, 52 Max OCV, Prince Spool Gun, Ground Clamp, Regulator, Tweco Spool Gun, Ground Clamp, Regulator, Tweco Spool Gun Control, Cart Mounted, 230/460 Volt 3-Phase, s/n: AC438170. Approx 33"x42"x38"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

594.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100727-3. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

595.2-Wheel Cart Mounted Breaker Panel, Outles, Cords and Assorted Plugs
OTHR
596.Alva Allen Model B2 Punch Press. 2-Ton Capacity, 5" Shut Height, 3/4" Stroke, 3/4" Ram Adjustment, Bench Mounted with Stop, 110 Volt Motor, s/n: JEH12190. Approx 78"x22"x57"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

597.Custom Drilling Machine. 2-Spindle, 1 1/4" to Approx 11 1/4" Between Spindles, 0-1/4" Capacity Drill Chucks, 480 Volt 3-Phase, Approx 101"x32"x82"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

598.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-9. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

599.Signode Model DD-1A Banding Cart.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

601.Tigerstop Automatic Stock Stop and Pusher. 10' Stop Travel, Control, Metal Stand, 110 Volt, Approx 144"x27"x52"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

602.Dayton Hydraulic Lift Cart. Estimated 500lb Capacity, 17 1/2"x27 1/2" Platform, 8 3/4" to 30" Platform Height, Foot Pump

Location: Wasau, WI

Removal for this item is May 23rd 2017.

603.Kalamazoo Belt Grinder with Stand. 1" Belt Width, Assorted Extra Belts, Baldor 1/3HP 115/208-230 Volt Motor. Approx 20"x20"x58"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

604.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-5. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

605.(1) Section of Cantilever Style Racking Consisting of: (2) 151 1/4"x51 1/4"x9 1/4" Uprights, (4) 50" Arms, (4) 42" Arms, Bracing and Assembly Hardware

Location: Wasau, WI

Removal for this item is May 23rd 2017.

606.Rol-Lift Manual Pallet Jack. 4000lb Capacity, 7"x72" Forks, 12 1/4" Between Forks

Location: Wasau, WI

Removal for this item is May 23rd 2017.

607.Pair of Forklift Forks, 1 3/4" Fork Thickness, Will Fit 16" Carriage, 4"x48" Fork Dimensions

Location: Wasau, WI

Removal for this item is May 23rd 2017.

608.Banding Cart with Band Cutter

Location: Wasau, WI

Removal for this item is May 23rd 2017.

609.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-6. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

610.Fincor Adjustable Frequency AC Motor Control with Cables
SA 8
611.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-4. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

612.Banding Cart with 1 1/4" Metal Strapping, Tensioner, Cripmer and Seals

Location: Wasau, WI

Removal for this item is May 23rd 2017.

613.Miller Model Millermatic 200 Constant Potential DC Arc Welder. 200 Amp 28 Volt Rated Output @ 60% Duty Cycle, 42 max OCV, Built-In Wire Feeder, Radnor Gun, Ground Clamp, Gas Regulator, Tweco Spool Gun Control (No Spool Gun) Cart Mounted, 200/230 Volt 1-Phase, s/n: JF886423. Approx 19"x42"x65"

Location: Wasau, WI

Removal for this item is May 23rd 2017.

614.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-8. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

615.Assorted Cat 40 Tooling Including: (9) End Mill Style Holders, Clamp Tool, (1) Huot Rack and (1) Shop Made Rack

Location: Wasau, WI

Removal for this item is May 23rd 2017.

616.Orgapack Banding Tansioner

Location: Wasau, WI

Removal for this item is May 23rd 2017.

617.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-2. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

618.Kurt Versatile Lock Precision 6" Machine Vise Model 3600V, Serial No. 010516
Approximate Weight: 65lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
619.Nitchi 1.5 Ton Manual Chain Hoist Lot nO. 8210, Approx. 101" Drop, 5/16" Link with Jel 1-1/2 Ton Trolley / Skate, 4-3/4" Wheel Width, 6-1/4" Center
SIR
621.(2) International Light, Inc. Radio-Merter/Photometer Digital Model 1L1400A in Foam Fitted Case and Instruction Manual
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
622.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100727-1. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

623.ECOA Industrial Products Model CDL Hydraulic Scissor Lift Table. 500lb Capacity, 18"x36" Table Area, 7" to Approx 36" Table Height Range, s/n: 100930-7. Note: Separate source of hydraulic pressre required.

Location: Wasau, WI

Removal for this item is May 23rd 2017.

624.Amprobe Model AMB-50, 5000V Inulation Resistance Tester with Accessories, User Manual, In Plastic Case
Approximate Weight: 9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
625.(4) Assorted CAT 50 Taper Tool Holders, (1) Valenite No. ME762-44-M1015191 Boring Bar with Adjustable Head, (1) 1.00" End Mill Type, (1) Britney No. V50CH-100-550 Collet, (1) Beaver No. CV-49-16630 Collet
Approximate Weight: 39lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
626.Approx. (32) Assorted Cogsdill and EZ-Burr Deburring Tools, up to .660" Diameter, No. SEZ-2958
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
627.(13) Assorted Collets, (6) Hardinge Type 5C Collet, up to 1.00" Diameter, (2) Erickson Type TG100 Collets, 1.00" Diameter and More
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
628.Toro Model 20005 Recycler Lawn Mower, s/n: 250068596
OTHR
629.Delta Model 11-950 Bench Top Drill Press. 4" Throat, 6 1/2"x6 1/2" Tilting Table, 1/2" Capacity Chuck, 1/4HP 115 Volt, s/n: 8920
Approximate Weight: 50lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
631.(3) Assorted Tool Holders, (1) Dihart No. 507.02.008, (1) HSK Shank Shell Mill Holder No. A392.41005C100-19-11, 3/4" Arbor, (1) Tapping Head with No. 2 MT Shank, Mfg, Not Available
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
632.(5) Rolls of 3M 240A Three-M-Ite RB Cloth OP Rolls. Grade 120X, 18" Wide, 75 Yards Long
633.Assorted Tools and End Mills, Allen Wrenches - Standard & Metric, Drill Bushings up to 1-1/8", Carbide Drills "C" Pin, Deburring Tool, KNU-V800 Clamp, (15) Automotive Shanks, (7) 5/8" Diameter x 3", (8) 7/8" Diameter x 3-5/8"
SA 5
634.Wooden Trunk with Metal Hardware. Possibly Haunted, Approx 32"x19"x21 1/2"
Rack
635.Leland Gifford Drill Press. Sliding Head Type, 10" Throat, 22 3/4"x20 3/4" Table, 0-3/8" Capacity Albrechty Keyless Chuck, 440 Volt 3-Phase, Approx 30"X45"x75"
West WHSE 1

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

636.(4) Rolls of Clear Plastic Sheeting. 32"x2000'x.001" Each
Rack
637.Kito Corp Code ER010LB Electric Chain Hoist. 2200lb Capacity, Incomplete Motorized Trolly, Electrification, Chain Bag, Swivel Hook, No Control, 1/2HP 440 Volt 3-phase, s/n: 000204
SA 6
638.Assorted Pneumatic Components Including Cylinders, Gages, Regulators and More
Approximate Weight: 11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
639.Vestil Model TM-20-DC Pallet Tipper. 2000lb Capacity, Pendant Control, Brake, 6"x43" Forks, 14" Between Forks, 12-Volt System, Built-In 110 Volt Charger, s/n: S1124549. Approx 40"x68"x45"

Video Available. Click on lot to view.
OTHR

640.(2) Acheson Lubrimate 351 Fixed Nozzle Spray Systems
SIR
641.Assorted Office Furniture: (3) 4-Drawer File Cabinets, 2-Door Cabinet, Rolling Cabinet, Coat Rack
SA 5
642.(4) Stepping Motors: (2) Step-Syn, 3.6V, 1.8 Degree Step; (2) Crouzet; Misc Belts
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
643.CAT 50 Taper Boring Bar, 7" Length Bar, 3.600" Width, Adjustable Head, Balanced
Approximate Weight: 22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
644.Shop Made Double End Grrinder with 8" Buffing Wheel and 8" Brush. 3/4HP 120 Volt, Approx 23"x19"x43"
HM
645.Assorted items: Filters, Hubs, Cables and More
SA 5
646.(3) Electric Motors: (2) With Pumps, (1) With Gear Reducer
Rack
647.Dayton Combination Belt/Disc Sander. Modified for Buffing Wheel, 6" Belt Capacity, 120 Volt, Approx 22"x20"x61"
HM
648.Tepco Air Cleaner, 110 Volt, Approx 42"x38"x23"
SA 4
649.Custom Inspection Apparatus with 48"x36"x8" Granite Plate with Tapped Inserts, Vibration Isolating Metal Stand, Assorted Electronic Components and Fixturing. Approx 58"x59"x72" (Crate Dimensions)
West WHSE 1

Fork Lift for Hire has quoted $100 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

650.(3) Leeson Cat No. 102014.00 1/4HP Motor. 1725 RPM, 115/230 Volt
SIR
651.Fume/Dust Collection Benches with Central Filter. (2) 74 1/4"x30"x75" Metal Frame Benches, 110 Volt Collector, Approx 188"x35"x75" When Assembled
West WHSE 2

Fork Lift for Hire has quoted $100 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

652.Assorted Fire Brick
Rack
653.(2) Hon 4-Drawer File Cabinets. 18"x26 1/2"x52" Each
SA 8
654.3-Drawer Lateral File Cabinet. 42"x18 1/4"x40"
SA 8
655.2-Wheel Cart with Pneumatic Tires
OTHR
656.(5) Pails of Metalworking Fluid Concentrate Including Cimstaf 50B and Cimperial 1011
Rack
657.Rolling File Cabinet. 16 1/2"x26"x30"
OTHR
658.EAM Powered Conveyor. 11" Belt Width, 23" Run, Stand, 34 1/2" High, 110 Volt
SA 8
659.Vestil Model TM-20-DC Pallet Tipper. 2000lb Capacity, Pendant Control, Brake, 6"x43" Forks, 14" Between Forks, 12-Volt System, Built-In 110 Volt Charger, s/n: S1094500. Approx 40"x68"x45"

Video Available. Click on lot to view.
OTHR

660.Custom Made Work Stop. 66" Stop Travel, Metal Frame, Approx 75"x21"x70"
West WHSE 1
661.Craftsman 6-Drawer Tool Chest. 26"x12"x15"
Rack
662.Approx (40) 26"x14"x6" Wooden Crates with Rope Handles
SA 8
663.Nu Star Power Pusher Attachment. Approx 35"x18"x24"
SA 7
664.(4) 32" Throat Clamps, Approx 2 1/4" Capacity
Rack
665.84"x30"x1 1/4" Laboratory Countertop
West WHSE 1
666.(2) 73 1/2" Tall Stand with Approx 20" Diameter Bases
SA 8
667.20" Diameter Pedestal Fan
SA 8
668.30"x30"x21" Metal Table with 1" Thick Top
HM
669.Yale Manual Chain Hoist. Estimated 2-Ton Capacity
SA 5
671.Zim Air Pneumatic Cable Hoist. 350lb Capacity, No Control
SA 7
672.(2) Safety Cans, (1) Non-Metallic
SA 7
673.Parker Model TRF703001 CTS Unit. Approx 29 1/2"x24"x36"
OTHR
674.Osborne Model PI-1K13CDE Fluid Filter. 115 Volt, Approx 26"x16"x41"
SA 8
675.Fibro Type 1124174011140096T4 Rotary Table. 19 5/8" Diamter T-Slotted Face, s/n: 111241579
SA 8
676.40 1/2"x50" Poly Tank. Labeled "Salt Brine"
out
677.(4) Metal Jerry Cans
SA 7
678.Copper Plating Line with Control Cabinet, Rapid Power Supply, (2) Aldonex Power Supplies, (9) Poly Tanks and More
West WHSE 4

Fork Lift for Hire has quoted $250 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

679.Rectangular Steel Tube. 12"x4"x20' with 3/8" Wall, Approx 775lbs
West WHSE 1

Fork Lift for Hire has quoted $40 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

681.Filtration Assembly with (2) Filter Housings; 11 1/2" Diameter 110 Volt Disc typ Oil Skimmer
SA 8
682.Custom Inspection Apparatus with 48"x36"x8" Granite Plate with Tapped Inserts, Vibration Isolating Metal Stand, Assorted Electronic Components and Fixturing. Approx 58"x59"x72" (Crate Dimensions)
West WHSE 1

Fork Lift for Hire has quoted $100 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

683.40"x25" Cart, 11 1/2" High
OTHR
684.Aercology Model DM500 Filter Type Dust Collector. On Wheels, 3/4HP 110 Volt Motor, s/n: 46482. Approx 26"x26"x35 1/2"
OTHR
685.28"x20"x22" Non-Magnetic Stainless Steel Tank with Filter Housings and More
SA 7
686.Craftsman Motorcycle/ATV Jack. 1500lb Capacity, Foot Pump
OTHR
687.Coffing Electric Chain Hoist. 1/2 Ton Capacity, Swivel Hook, Chain Bag, Pendant Control, 115/230 Volt
SA 8
688.Pedestal Stand with 10"x10" Wooden Top
SA 5
689.Pair of Cast Iron Legs. 19" Wide at Base, 9 1/2"x5" at Top
SA 5
691.Pair of Heavy Duty Legs. 25" High, 23 1/2"x4" Top Plate
SA 5
692.Zim Air Pneumatic Cable Hoist. 350lb Capacity, Control
SA 7
693.Pair of 11"x19 1/2" Metal Brackets
SA 8
694.(6) Assorted Tubs/Tanks up to 34 1/2"x28 1/2"x35 1/2" Inside
West WHSE 4

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

695.(8) MK VFS Electric Motors with Gear Reducers
Approximate Weight: 18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
696.Craftsman 6" Belt Sander. 12"x6 1/4" Slotted Table, No Motor, Approx 16"x17"x27 1/4"
Approximate Weight: 43lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Table 5
697.Custom Made Torit Downdraft Table. 11"x14 1/2" Mesh Area, 3-Phase Motor, Approx 48"x23"x49"
SA 8
698.Clean Air Systems Air Cleaner. 48"x34"x30"
SA 8
699.Coolant Tank with Pump, On Wheels, 220/440 Volt 3-Phase, Approx 40"x20"x44"
OTHR
701.Aloris Model DA41 Boring Bar Holder
Approximate Weight: 19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
702.(2) Seco 60 Taper Tool Holders, (1) BZ5 Right Hand No. D1161471019, Looks Like Shell Mill Type, Total Length 22-1/4", (1) No. K56 Right Hand D116155-1031, 2" Length Shaft, Total Length 10"
Approximate Weight: 71lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
703.Approx. (30) F Land Type Diamond Tipped Insert Cutters, Approx. .650" x .079" x .070", 52-92-R6D, Made in Germany
Approximate Weight: 3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
704.Approx. (130) Future Tech Diamond Tool Co. No. T15CR100093E102 Diamond Tipped Replacement Cutting Heads
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
705.Approx. (170) Assorted 3M Abrasive Disks and Belts, (100) Coated Abrasive Fibre Discs No. 3M985C, Grade 36, (20) 3M Scotch-Brite Surface Condition Belts No. 90642, 2" x 30", (100) 3M Coated Abrasive Belts No. 977F, 1-3/4" x 15-1/2"
SIR
706.(60) Future Tech Replacement Heads with Diamond Tipped Carbide Cutteas No. T1SCR100093E1D3
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
707.Assorted Alliant and Bridgeport Milling Machine Parts
Approximate Weight: 39lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
708.Assorted Alliant and Bridgeport Milling Machine Parts
Approximate Weight: 45lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
709.(7) Assorted Sheet Rocking Tools, Banjo Taper, 23" Body Craft Super Sander, Hawk, Corner Blade, (3) Blade Knives up to 12" Long
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 2
710.(7) Assorted 5C Collets. 12mm to 1"
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
711.Assorted Taps up to 3/4-14
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
712.Assorted HSS End Mills from 1/8" to 2"
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
713.Assorted Straight Shank Drills and Reamers
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
714.Cannon 2-Piece Fiberglass Kayak Paddle. 91 1/2" Overall Length
Right
715.Assorted Items: Machinery's Handbook, 24-Grit Dressing Sticks, Torch Tips, Dowel Pins
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
716.Assorted Alliance Machine Parts
Approximate Weight: 22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
717.Approx 20' 3/C 10-Ga Extension Cord
Rack
718.Approx 20' 3/C 10-Ga Extension Cord
Rack
719.(6) Renishaw 4m Conduit Kits
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
720.Assorted Gages: Mostly OD Thread Typ up to 1 1/2"; Some Plug Gages
Approximate Weight: 18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
721.Approx. (40) Future Tech Diamond Tool Co. No. TISPEW-43-XD03 Daimond Tipped Carbide Inserts
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
722.7"x5"x5" Adjustable Angle Plate
Approximate Weight: 15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
723.(2) Verbatim Card Readers
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
724.Assorted Items Including: 32A 3-Phase Male Plug; Foot Switch; Hundreds of Oil Cups
Approximate Weight: 22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
725.(3) Marathon Model BVC 48C14D57B P Electric Motors. 1/4HP 1425 RPM, 110/220 Volt
Approximate Weight: 51lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
726.Pallet of Assorted Items: Motor; Gearbox, Wheels, Cable and More
SA 6
727.Approx 20' 3/C 10-Ga Extension Cord
Rack
728.Approx. (81) Futuretech Diamond Tool Co. No. T1SCR100093E1D3 Diamond Tipped Carbide Replacement Cutting Head
Approximate Weight: 7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
729.Bosch Model 11212SR Hammer Drill with Metal Case
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
730.Craftsman 7 1/4" Circular Saw; (2) Empty DeWalt Power Tool Cases
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
731.Assorted Pneumatic Tools: (1) Box Stapler; (1) Mac 900 RPM Sander; (1) Paint Sprayer with Mask
Approximate Weight: 16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
732.Schauer 12 Volt Battery Charger. 50A/12A/2A Output, 120 Volt Input
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
733.Approx. (63) Assorted Future Tech Diamond Tool Co. Diamond Tipped Carbide Inserts and Replacement Heads, (27) No. TISCR1000G3E1D1 Cutting Heads, (16) Mo. T1APFT160-408D02 Inserts, (9) No. TITCHW-215-2B01 Inserts and (30) Mapal Diamond Tipped Carbide Replacement Heads
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
734.(3) Shackles with Pins
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
735.Assorted Items: 14" Abrasive Wheels; 12" 80-Tooth Circular Saw Blade; Conduit Bender; Kant-Twist Clamp; (2) Hammers; Chain; 12" Fine Tooth Blade
Approximate Weight: 32lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
736.Assorted Ridgid Pipe Tools: (1) Ratcheting Threading Handle with 3/4" & 1" Dies; No 2A Cutter; 24" Pipe Wrench
Approximate Weight: 26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Left
737.Assorted Bridgeport Milling Machine Parts
Approximate Weight: 24lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
738.Troyke Model BL-18 Rotary Table, 18" Face with 1/2" T-Slots.
SA 5
739.Cuttermaster Model HDT-30 Cutting Tool Grinder. Air Bearing Fixture with 5C Taper, 9.8" Max Tool OD, 10 1/2" Max Flute Legnth, 6" Longidutinal Table Travel, 3" Cross Table Travel, 6" Motor Slide Travel, 5" Cup Wheel Capacity, Tilting Motor, Stand, 1/3HP 110/220 Volt Motor, s/n: 2556B
OTHR
740.NECO DGP 3-Phase Transformer. 25KVA, 460/230 Volt Primary, 250/240/115 Volt Secondary, 365lbs, s/n: 368A712K79. Approx 26"x18"x30"
West WHSE 2

Fork Lift for Hire has quoted $40 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

741.(6) 5"x30"x14" Shop Made Angle Plates
SA 6
742.Pangborn Blasting Pot with Hose. 30"x48" Reservoir Dimensions, Pneumatic Components, HD Hose, On Wheels, s/n: 1AU11-6729. Approx 50"x50"x78"
OTHR
743.Assorted Pleated Filters up to 20"x25"x1"
HM
744.NECO DGP 3-Phase Transformer. 25KVA, 460/230 Volt Primary, 250/240/115 Volt Secondary, 365lbs, s/n: 368A712K79. Approx 26"x18"x30"
West WHSE 2

Fork Lift for Hire has quoted $40 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

745.Metal Bench with 1" Thick Top. 48"x30"x30"
HM
746.60"x30"x11 3/4" Cast Iron Surface Plate
West WHSE 1

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

747.Double Sided Cantilever Style Rack with (6) Sets of 10 1/2" Arms per Side, and (14) Drawers, On Wheels, Approx 28"x50"x68"
OTHR
748.Approx (60) 7mm Coolant Thru Cabide Reamers. 1 7/8" Overall Length, 5/16" Shank
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
749.Approx (25) Mitsubishi Carbide Inserts
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
750.Assorted Gear Hobs
Approximate Weight: 51lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
751.Sorgel Cat No. 112TC10715 3-Phase Transformer. 112.5 KVA, 480 HV, 208Y/120 LV, 725lbs, Approx 30"x24"x37 1/2"
West WHSE 2
752.25 1/2"x25 1/2"x28" Rolling Metal Frame
OTHR
753.Rolling Staircase. 28" Platform Height, 34"x39" Platform Area, 64" Overall Height
OTHR
754.84"x40"x43 1/2" Heavy Duty Cart
OTHR
755.(10) Assorted Metal Shipping Cans: (4) 15"x20" (5) 15"x24" and (1) 13 1/2"x20"
HM
756.Advance Model Micromatic 17B Walk-Behind Floor Scrubber with Charger. 24"x45"x42"
OTHR
757.GS Cat No. DT691H20 3-Phase Transformer. 20KVA, 230 Volt Primary, 230Y/133 Volt Secondary, 325lbs, s/n: 352550. Approx 23"x15"x28 1/2"
West WHSE 2
758.Sorgel Type SO 3-Phase Transformer. 9KVA, 480 Volt Primary, 208Y/120 Volt Secondary, Approx 16"x10"x17"
West WHSE 2
759.Mall Drill, 1/4", 2500rpm, Model: 143-T, Serial No. A-54247, Includes Chuck Key.
SIR
760.Milwaukee 1/2" Driver/Drill, 0522-20, 18 Volt, with Charger and Case.
SIR
761.Starrett Prosite Measuring Wheel, Model: PMW-740, 15" Wheal, 5 Digit Counter, Collapsible Handle.
SIR
762.General Purpose 3-Phase Transformer. 30KVA, 480 HV, 240/120 LV, 270lbs, Approx 23 1/2"x16 1/2"x28"
West WHSE 2
763.Acme Cat No. T-2A-53343-3S 3-Phase Transformer. 30KVA, 480 Volt Primary, 240/120 Volt Secondary, 325lbs, Approx 24 1/2"x19 1/2"x26"
West WHSE 2
764.40KVA Transformer, Approx 20"x16"x20"
West WHSE 2
765.Square D Cat No. 30TGH 3-Phase Transformer. 30KVA, 480 HV, 240 LV, 285lbs, Approx 22"x15"x23"
West WHSE 2
766.Sorgel Cat No. 112TC10715 3-Phase Transformer. 112.5 KVA, 480 HV, 208Y/120 LV, 725lbs, Approx 30"x24"x37 1/2"
West WHSE 2

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

767.New Age Industrial NSF Aluminum Shelf. 72"x24"x76"
South WHSE
768.Rolling 2-Door Cabinet with (3) Shelves. Lockable, Approx 43"x25"x44"
South WHSE
769.(6) Boxes of 10" Diameter Sprockets
Rack
770.Metal Frame Flatbed Cart with 27"x54" Wooden Deck
South WHSE
771.3-Tier Stainless Steel Cart. 45 1/2"x26"x61"
South WHSE
772.5-Tier NSF Aluminum Rack. 48"x18"x68 1/2"
South WHSE
773.Manual Pallet Jack. 5500lb Capacity, 48" Forks, 14 1/2" Between Forks
774.5 1/2" Diameter, 33 1/4" high Cylindrical Square with1 6" Diameter Base and Rolling Wooden Case
South WHSE
775.Large Quantity of Plastic Stock Drop
HM
776.Kalamazoo Abrasive Saw. 10" Wheel Capacity, 4 1/2" Quick Acting Vise, Stand, 3HP 230/460 Volt 3-Phase Motor, Approx 16"d34"x56"
HM
777.Assorted Items: Speedy Metl Model BN Furnace, Gas Train and Blower for Furnace, Electric Motor, Gas Cylinder, Bulk Bags
HM
778.Link-Belt Speed Reducer. 40:1 Ratio, 1160 Input RPM, 29 Output RPM, 3258 in/lb Output Torque, Approx 19"x18"x18 1/2"779
SA 6
779.Assorted Steel Including (9) Pieces of 6"x64" I-Beam; Rectangular Tube
SA 5
780.Laboratory Hood. 110 Volt, Approx 51 1/2"x35"x49"
SA 4
781.Material Racks with Material: (4) Stackable Typ Racks wit Assortment of Round Steel up to 4" Diameter; 48"x84"x94 1/2" Rack with Round, Rectangular, Angle and Other Types of Steel Stock

Fork Lift for Hire has quoted $125 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

782.(4) Pieces of Custom Aluminum Extrusion, Approx 8"x2"x96" Each
West WHSE 4
783.(10) Aluminum Bars: (8) 1 1/8"x1 3/4"x10''; (1) 1"x1 3/4"x10' and (1) 1 1/8"x1 3/4"x107"
West WHSE 4
784.3"x1"x12' Aluminum Bar
West WHSE 4
785.(5) 1 3/8"x1 1/4"x10' Aluminum Bars
West WHSE 4
786.(2) 2 3/16"x1"x10' Aluminum Bars
West WHSE 4
787.3"x141 3/4" Round 6061 Aluminum Bar
West WHSE 4
788.(4) Aluminum Bars: (1) 1 1/2"x1"x63"; (1) 1 3/4"x1 1/8"x74"; (1) 2"x1 3/4"x72" and (1) 1 3/4"x1 1/8"x86 1/2"
West WHSE 4
789.72"x48"x3/16" Aluminum Sheet Marked 5052
West WHSE 4
790.Stock Rack with Contents of Assorted Ferrous and Non-Ferrous Material Including: Steel, Expanded Metal, Perforated and More. Sheet Sizes up to 4'x10'
West WHSE 3

Fork Lift for Hire has quoted $50 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

791.Rolling Stock Rack with Contents of Assorted Steel Sheet, Tread Plate, Pans and More. Rack Dimensions: 70"x30"x68"
West WHSE 3

Fork Lift for Hire has quoted $75 to load this item. Please call Dan with questions regarding this quote at 612-803-4350. Please call Dan prior to your arrival so he can stage your items and minimize your wait.

792.Leeson Cat No. 101646.00 Electric Motor. 1/4HP, 1725 RPM, 208-230/460 Volt 3-Phase
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
793.Self-Dumping Hopper. Approx 1YD Capacity, 50"x63"x40"
West WHSE 3
794.Powr-Kraft Radial Arm Saw. 10" Blade Capacity, Miter/Bevel/Rip, Wooden Table, 110 Volt, Approx 43"x34"x34"
SA 7
795.32" Diameter Vibratory Bowl Feeder. 25 1/2" Overall Height
SA 7
796.Losma Gemini Series Model M Mist Collector. 440 Volt 3-Phase, Approx 46"x17"x32"
SA 8
796.1.Losma Model Guard 30 PreFiltration Module and Losma Clipper 30 Mist Collector Filter
797.Large Quantity of Wheels. Tubs not included
East WHSE
798.(2) Boxes of Assorted Phones
799.Assorted Amada Thick Turret Punches and Dies. Some New.
SA 7
800.Assorted Hoffman Enclosures up to 24"x8"x30" Tub not included
East WHSE
801.Mitutoyo Code NMo. 515-51 13" Cadillac Style Height Gage. .00001" Vernier, Wooden Case, s/n: 741650
Approximate Weight: 64lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Table 5
802.Over (50) Velenite SPEW3253F Carbide Inserts
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
803.Live Center, Morse Taper #6
Approximate Weight: 26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
BC 2
804.(16) Valenite 7A0891888 Inserts
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
805.Assorted Deburring Inserts
Approximate Weight: 1lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
806.Approx (120) Komet Q36 24000.0221 K10 Inserts
Approximate Weight: 2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
807.Approx (39) 7mm Coolant Thru Cabide Reamers. 1 7/8" Overall Length, 5/16" Shank
Approximate Weight: 4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
808.Assorted Items: HSK Shank Tool Holder; Shim Kits; Inserts
Approximate Weight: 5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
809.Foot Operated Hydraulic Pump
Approximate Weight: 39lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 2
810.The Ready Tool Co. NO-R26HD, Live Center, Morse Taper #6
SIR
811.OTC Model Monitor 4000E Diagnostic Scanner In Case, Includes Cords for Different Plugs, and Refrence Manuals.
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
812.(2) Halogen Work Lights, (1) Husky (Needs New Bulb, (1) Regent 2 Light Spotlight w/ Adjustable Height Stand.
BC
813.Craftsman 16" Chainsaw, 33 CC Engine.
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
814.Lake Side Model V7 3" Benchtop Swivel Vise, Approx. 0-5" Opening Cap. Overall: 12"x5"x6".
Approximate Weight: 13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
815.Milwaukee Model 6390-20 (Tilt-Lok) 7-1/4" Adjustable Handle Circular Saw, 120V, 15 Amp, 5800 Min. RPM.
SIR 2
816.New Jebco Limited Edition Dale Earnhardt Clock, No. 5,078 of 10,000, Overall: 23"x11"
Approximate Weight: 6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
817.Assorted Items: Sure Shot Sprayer; Plugs; Breakers, Tap, Drilled & Tapped Ring
Approximate Weight: 21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Right
818.Skil Saw Model 534 6-1/2" Double Insulated 1-1/2 HP Circular Saw, 120 V, 9 Amps.
SIR 2
819.Jacobs Ball Bearing Super Chuck, NO. 20N, Cap. 3/8" - 1", Morse Taper #5, Part # A0505.
SIR
820.OTC Model Monitor 4000E Diagnostic Scanner In Case, Includes Cords for Different Plugs.
Approximate Weight: 14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
821.(2) Live Center, Morse Taper #5.
-Motor Tool Detroit, EL-500-HS
Rotor Jarno- NO14, K7157.
SIR
822.Mitutoyo Code No. 515-117 12" Cadillac Height Gage Riser, s/n: 80604
Approximate Weight: 34lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Table 5
823.Poulan Model Wild Thing 18" Chain Saw w/ Hard Shell Case.
SIR 1
824.6" Precision Machine Vise, 0-6" Holding Cap.
Approximate Weight: 65lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
825.Aloris Type Tool Post, 4"
SIR
826.#5MT Shani 1-27/32" National Drill Bit HSS, 11" Flute Length, with 5-6 MT Sleeve
SIR
827.Enco Model 205-6416 Variable Speed Power Table Feed Unit, Torque: 135 in-lb., 110V, 2.5Amps, 50/60 HZ, S/N N08806.
SIR
828.Merrill Bros. Plate Clamp, NO. 21, 1 Ton, Grip: 0"-3/4".
SIR
829.Craftsman 3HP Shop-Vac w/ Hose and Attachments.
SIR
830.Speedglas Auto Darkening Welding Helmet, Series: 9100.
SIR
831.Tool Shop Model 240-2004 5 Speed Benchtop Drill Press, 1/3 HP, 4" Throat, 2" Quill, 6"x6" Adjustable Height/Pivot Table, 0- 1/2" Chuck, RPM Speed From 620 Up to 3100, Overall: 17"x7"x23"
Approximate Weight: 50lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 1
832.(5) Sets. Threshold and Weather Stripping, Fits top and Sides of doorway, Size : 36" x 84", Silicone and Aluminum.
SIR
833.Enco Model 135 Variable Speed Power Feed Unit.
Approximate Weight: 8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
SIR 3
834.(4) Jacobs Chuck Keys.
(2)K4, (2)K5.
SIR
835.Budgit 1/2 Ton Chain Hoist w/ Pendant Control, 1/2 HP, 230/460 V, 3Ph, 1725 RPM.
Approximate Weight: 43lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Table 5
836.Merrill Bros. Plate Clamp, NO. 55, 1/2 Ton, Grip: 0"-5/8".
SIR
837.Aluminum Trailer Hitch Mounting Cargo Rack w/ Lights, Overall Internal Storage Space Measures: 47-1/2" x 20-1/2" x 6" Rails, Works w/ 2" Receiver, Overall: 49-1/2"x33"x9-1/2", Weighs Approx. 15 LBS.
HM
838.ROHM 110HVL MK5 Live Center, Morse Taper #5
SIR
839.Jacobs Ball Bearing Super Chuck, NO. 18N, Cap. 1/8" - 3/4", Morse Taper #5.
SIR
840.(9) Assorted Morse Taper Sleeves. 2-5, 3-5, 3-6, 4-6 (2), 5-6 (4).
SIR
841.1.5 HP Blower Motor w/ Stand, Baldor Model VM3550-FAN, 208-230/460 Volt, 3Ph, 3450RPM, Overall Motor and Fan Measure: 24"x20"x15".
SIR
842.Bridgeport D.R.O. Assorted Parts, Digital Measure Display.
SIR
843.Continental Fan Mfg. Inline Duct Fan, Type: AXC 200 B, Approx 7-3/4" opening.
SIR
844.Assorted Endmills, Approx. (35) , Most are 4 Flute, Flat Nose.
Dia. 3/4"-1" Approx., Flute Size: 2"-3-1/2.
Approximate Weight: 17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Table 5
845.Assorted Endmills, Approx. (60), Most are 4 Flute, Square Nose, Approx. Dia: 1/2"-3/4", Approx. Flute Length: 1"-2-1/2".
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Table 5
846.Assorted Endmills, Approx. (60), Most 4 Flute, Flat Nose, Approx. Dia: 3/8-3/4, Approx Flute Length: 1"-1-1/2".
Approximate Weight: 10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Table 5
847.(2) Hevi-Duty Type HS 1-Phase .500KVA Transformers: (1) Cat No. HS1F500A, 240/480 Volt Primary, 120/240 Volt Secondary; (1) Catalog No. HS19F500A, 120/240 Volt Primary, 12/24 Volt Secondary
Approximate Weight: 47lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
848.(2) Hevi-Duty Type HS Catalog No. HS1F1BS 1KVA 1-Phase Transformers. 240/480 Volt Primary, 120/240 Volt Secondary
SIR
849.(2) General Purpose Transformers: (1) Hevi-Duty Type HS Catalog Nol HS1F500B, .500KVA, 240/480 Volt Primary, 120/240 Volt Secondary; (1) GE Catalog No. 9T51B0008, .500 KVA, 1-Phase, 240/480 Volt Primary, 120/240 Volt Secondary
Approximate Weight: 47lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
850.(2) Transformers: (1 ) GE H260, 1.0KVA; (1) Hevi-Duty Cat No. H51B150, .150KVA 240/480 Volt Primary, 120/240 Volt Secondary,
Approximate Weight: 26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
851.(3) Transformers: (1) Acme Catalog No. T-2-53011-S, 1.5KVA, 240X480 Volt Primary, 120/240 Volt Secondary, 1-Phase, 30lbs; (1) Acme Catalog No. T-2-53008-S, .500KVA, 240X480 Volt Primary, 120/240 Volt Secondary, 1-Phase, 15lbs; (1) Hevi-Duty Catalog No. HS1A150, .150KVA, 240/480 Volt Primary, 120/240 Volt Secondary
Approximate Weight: 60lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
852.(2) Hevi-Duty Type HS Catalog No. HS1F2AS 1-Phase 2KVA Transformers. 240/480 Volt Primary, 120/240 Volt Secondary
Approximate Weight: 91lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
853.Acme Catalog No. T-2-53014 5KVA 1-Phase Transformer. 240X480 Volt Primary, 120/240 Volt Secondary, Approx 15 1/2"x8"x7 1/4"
Approximate Weight: 72lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
Rack 4
854.Hevi-Duty Type HT Catalog No. HT1F6AS 6KVA 3-Phase Transformer. 480 Volt Primary, 208Y/120 Volt Secondary, Approx 12"x13"x8 1/2"
SA 4
855.Federal Pacific Cat No. 50302 9KVA 3-Phase Transformer. 480 Volt Primary, 208/120 Volt Secondary, Approx 13 1/2"x12"x9"
SA 4
856.Hevi-Duty Type HT Catalog No. HT5F3AS 3KVA 3-Phase Transformer. 480 Volt Primary, 240D/120 Volt Secondary, Approx 12"x13"x7 3/4"
SA 4
857.(9) Assorted Computer Towers. (6) HP, (2) Dell, (1) Gateway; Pentium and Pentium 4 Processors; (1) Marked "Bad Harddrive; (1) Marked "Bad Motherboard, Questionable HD"
858.Scotts (John Deere) Model SP6211 21" Walk Behine Lawn Mower, Self Propelled, Bag/Mulch/Side Discharge, Briggs & Stratton 6.5 HP Gasoline Engine, Please Note: Seller Indicates that Self Propelled Drive Needs Repair