Hoff Online Auctions
September Machinery Exchange 2018 - Thursday, September 6, 2018 Thursday, September 20, 2018 - Starting at 10:00am Central

Item Description
1.New, Never Used, Fanuc LR Mate 200iD 6-Axis Robot. 717mm Reach, 7kg Load Capacity, +/- 0.018 Degree Repeatability, 360-Degree J1 Motion Range, 245-Degree J2 Motioin Range, 420-Degree J3 Motion Range, 380-Degree J4 Motion Range, 250-Degree J5 Motion Range, 720-Degree J6 Motion Range, 380 to 1000 Degree/Sec Max Speed Depending on Axis, May Be Mounted from Floor/Upside Down/At Angle, Manuals, Pendant, Fanuc System R 30iB Mate Control, s/n: R16501875.
Main

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

2.Wright Line "Data Bank" Safe. 2-Door Style, 50"x24"x68 1/2" Inside, On Wheels, Includes Combination, 62 3/4"x36"x82" Exterior Dimensions, Approx 2700lbs. Note: Interior Rack is Removable
Main

Fork Lift for Hire has Quoted $125 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

3.New, Hydraulic Power Unit with Oilair Pump, Parker Bladder Accumulator, 59"x18"x30" Reservoir and Baldor 7.5HP 230/460V 3-Phase Motor. Approx 61"x48"x42"
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

3.1.Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.
3.2.UPS Shipping Available for small items Click here for more information.
3.3.This auction features EXTENDED BIDDING! View this lot to learn more.
3.4.How much time is left?
3.5.This auction STARTS TO CLOSE at 10:00 AM CDT at a rate of 5 lot per minute. Click this lot to learn more.
3.6.Click on this lot to learn more about preview dates and times.
3.7.Click on This Lot For Important Removal Information
3.8.Please click on this lot for Rigging Information.
4.New, Never Used So-Low Model C40-5S Chest Freezer. 0 to -40C Temperature Range, 29 3/4"x17 3/4"x16" Chamber, 230V 1-Phase, Electrical Cord and Switch, s/n: 15161448. Approx 43"x30"x45"
7G

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

5.New, Never Used, Sullair Model SD 1200-DDS-6V-SP Heatless Dessicant Dryer. 1200SCFM Capacity, 120 Degree F Max Inlet Temperature, 115V, s/n: 081200048. Approx 66"x60"x105"
Main

Fork Lift for Hire has Quoted $125 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

6.Set of 11 3/4" Diameter Aluminum Pie Jaws. 10" Deep
3-3
7.Conair Model TW Temperature Control Unit. On Wheels, 460V 3-Phase, s/n: 115151. 14"x39"x39"
Main
8.20' Storage Container/Conex Box. 1173 Cubic Foot Capacity, 92" Door Width, 90" Door Height, 19' 5" Interior Length, 20'x8'x8.5' Outside Dimensions, 4760lbs. Contents Not Included
Out

Fork Lift for Hire has Quoted $150 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

9.4' Crosscut Saw with Wooden Handles
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
10.2008 Doosan Model Puma MX2500ST Milling/Turning Center. 8-Axis Machine, 21.7" Max Cutting Diameter, 52.9" Max Machining Length, 29.5" Swing Over Cross Slide, 3.38" Spindle Bore, 7.5" X-Axis Travel of Turret, 40.9" Z-Axis Travel of Turret, 12-Position Turret with (12) Live Tool Positions, Variable Main and Sub Spindle Speeds to 3500 RPM, .001-Degree C-Axis Main/Sub Spindles, 35HP Main/Sub Spindle Motors
Milling Spindle:
Variable Spindle Speeds to 10,000 RPM, Capto-C6 Spindle Taper, +/- 105-Degree B-Axis Movement, 40-Station Tool Magazine, 20HP Milling Spindle Motor
Tool Setter, Chip Conveyor, Parts Catcher & Conveyor, ChipBlaster Coolant System with Filtration, Manuals, Fanuc Series 18i-TB CNC Control with Pendant, s/n: PX25ST0225. Approx 216"x94"x100" and 27,500lbs

Video Available. Click on lot to view.

Note: Live Tool Holders and Collet Nose Not Included. (2) 10" Chucks and Static Holders Included. Capto C-6 Holders Available Later in Sale Under Catagory "Tooling Capto C6.

Location: Fridley, MN (Not Hoff Warehouse)

Quickway Rigging has quoted $500 to load this machine. Please call Tony Milner with questions regarding this quote: 763.784.4295

11.OTC Model Y225 C-Frame Hydraulic Press. 25-Ton Capacity, 6 1/2" Throat, Approx 6" Stroke, 15" Max Under Ram, 6" Between Bed Rails, Spring Return, Assorted V-Blocks and Pushing Adapters, s/n: 1471. Approx 25"x26"x80"
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

12.Kurt Model HDLM6 6" Double Lock Precision Machine Vise. No Jaws, s/n: 2993
Approximate Weight:88lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
13.New, Equiprite Foldable Shop Crane. 770 to 1100lb Capacity Depending on Boom Length, 81.88" Max Hook Height, s/n: GS1601143
7G
14.Kennedy 8-Drawer Tool Chest with Key. 26 3/4"x8 1/2" x13 3/4"
Approximate Weight:36lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
15.Belfire Model 6312H Air Compressor. Reciprocating Type 35 ACFM @ 100psi Rated Output, 120-Gallon Horizontal Receiver Tank, 10HP 208-230/460V 3-Phase Motor, s/n: HOP327024. Approx 78"x28"x50"
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

16.AgCo Allis Model 1614VH Lawn Tractor. 16HP Briggs & Stratton V-Twin OHV Gasoline Engine, Hydrostatic Transmission, Approx 36" Mower Deck, Bagger, Dethatcher, Electric Start.

Video Available. Click on lot to view.
7G

17.Advance Model Hp501-5 Drum Mount Vacuum with Hose. 230V 1-Phase, s/n: 838789. Approx 67" High
Main
18.Lincoln Model PowerWave 455 Welding Power Source. 570A 43V Rated Output @ 60% Duty Cycle, Ground Cable, 208/230/460/575 Volt 3-Phase Input, s/n: na. Approx 20"x35"x27"
7G
19.New, Never Used DeVilbiss QMS Series Stainless Steel Paint Pressure Tank. 10-Gallon Capacity with QSR-502 Reciprocating Air Motor, s/n: 130001. Approx 18" Diameter, 38" Tall
7G
20.2015 Big Tex Gooseneck Flatbed Trailer. 23,900lb GVWR, 40' Deck, Tandem Axle, Ramps, VIN: 16VGX4024F6083221.
out
21.(14) Assorted 5C Collets From 3/32" to 1" and (1) 2" OD Step Collet, (1) 2" OD Expandable Collet and (1) Collet Stop
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
22.Keter Folding Work Table. 1000lb Capacity, 4 3/8" Collapsed Thickness, (2) Ratcheting 12" Clamps, Aluminum Legs
Approximate Weight:28lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
23.Digi Matex Inc. Model DS570 Digital Scale. 14 1/2"x11 3/4" Platen, 115V, s/n: 95205819
Approximate Weight:23lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
24.(3) Carboloy p/n: SD55-0875-350-1000R& Coolant Thru Indexable Endmills. 1" Shank Diameter. (NEW)
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
25.74 1/2" Steel Johnson Bar with Neoprene Covered Wheels
7G
26.Allen Bradley Cat. No. H-6300-Q-HOOAA Brushless Servo Motor. 3000 rpm, 5.1 KW, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
27.Sheppard Model LPS-34 Die Presetter/Alignment Fixture. Approx 23"x18"x30"
A51
28.Ingersoll-Rand Model PFSI-G Insight Graphics Torque Management System Controller (Appears to be NEW)
7G
29.Swift Stereo Ninety Stereo Microscope. 10x Eyepieces, 1x & 2x Objectives
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
30.Mycrona Type Signum BL 3D 4-Axis Optical Measuring Machine. 300x300x250mm (11.811"x11.811"x9.842") Measuring Range, Joystick Control, 120/230V, s/n: 0400601760. Approx 34"x40"x87 and 2000 lbs
Main

Fork Lift for Hire has Quoted $125 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

31.(12) Renishaw 4M Conduit Kts
Approximate Weight:31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
32.Hankison Mode DHW20 Compressed Air Dryer. 120V, s/n: 13IDHW5493. Approx 17 1/2"x30 3/4"x6 3/4"
Approximate Weight:80lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
33.(34) Richmill Collet Type BT30 Tool Holders
Approximate Weight:37lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
34.New, Sealed Box, Axis P5635-E 60Hz Network Camera. Continuous 360-Degree Pan, 30x Zoom, 1080p, s/n: ACCC8E69734. 9 1/2"x10"x17 3/4" Box Dimensions
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
35.Cadillac Model HG-6 6" Pla-Chek Height Gage, s/n: 6541G
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
36.Cantilever Style Rack. 60"x131" Legs wign 66" Wide Welded Brace, (4) Sets of 48" Arms. Note: Arms Adjustable/Removable, Legs & Braces Welded

Location: Bloomington, MN

37.Reliance Electric Model P18G3100F 1 hp Motor. 1760 rpm, 7/8" Shaft Diameter, 460 volt, 3-Phase.
38.Bausch & Lomb 20x Brinell Scope with Fitted Case and Instructions
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
39.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 21600072
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
40.Kitamura Model Mycenter 3 Vertical Machining Center, 35-1/2" x 16" T-Slotted Table, 30" X-Axis, 17.9" Y-Axis, 18.1" Z-Axis, BT-40 Spindle Taper, 10000 RPM Spindle, Yasnac CNC Controls, (20) Pocket ATC, Coolant Tank and Pump with Chiller, Lube System, 200/220 volt, 3-Phase, s/n: 11685, Approx. 108" x 86" x 100" Overall and 10500 lbs.

Location: Blaine, MN. Please Call (612) 521-5500 to Schedule a Preview Time for This Machine

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

Video Available. Click on lot to view.

41.Ex-Cell Model EXPRO2530 Pressure Washer. 2500psi, 3GPM, Cat Model 25FX30GZI Pump, Honda GX200 6.5HP Gasoline Engine, 21"x40"x27" Note: No Hose or Wand
7G
42.(10) Assorted End Mill Type Cat 40 Tool Holders
Approximate Weight:28lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
43.Rohm 6 1/4" 3-Jaw Chuck with 1 1/2" Hole Mounted on Aluminum Fixture
Approximate Weight:35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
44.56" 4-Piece Pool Cue with Case
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
45.(2) Hoffman Electrical Enclosures with Assorted Components Including (1) Top Mounted Transformer on Each. Approx 36"x24"x72" (Dimensions Not Including Transformer)
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

46.(2) Electrical Enclosures: (1) 30"x9"x30" with Assorted Components and (1) 30"x13 1/2"x30", Empty
A51
47.(4) New SMC MX20TN-50 Air Slide Tables
Approximate Weight:12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
48.Nordson Sealant Equipment Unit. Approx 31"x16"x14"
7G
49.Allen Bradley Cat. No. H-6300-Q-HOOAA Brushless Servo Motor. 3000 rpm, 3.4 KW, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
50.2001 Emco Model EmcoTurn 365MC CNC Turning Center. 65mm Working Range, 23.622" Swing Over Bed, 14.173" Swing Over Cross Slide, 8.267"/24.016" X/Z Slide Path, 29.921" Distance Main Spindle-Counter Spindle, 7.874"x7.874" Max Size of Workpiece, A6 Main/Counter Spindle Noses, Variable Main/Counter Spindle Speeds: 0-4200 RPM, 20.079" Counter Spindle Travel Path (Z), .001 Degree C-Axis Resolution, 12-Position Turret, All Turret Stations Driven, Variable Driven Tool Spindle Speeds: 0-4000 RPM, Coolant, Chip Conveyor, Full Enclosure, Siemens 840D CNC Control, s/n: R6AV08. Approx 183"x96"x80" and 8800lbs Note: Tooling NOT included with machine.

Video Available. Click on lot to view.
Main

Fork Lift for Hire has Quoted $350 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

51.(2) Snap Gages with Hardened Anvils and Wooden Cases: (1) Standard No. 1, Approx 1/2", s/n: 3138; (1) Standard Type, 7/8" to 1 5/8"
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
52.Micron Model BK40-1041-GAH 4.0 KVA Control Transformer. 4000/26390 (VA) Output. 9" x 8" x 11" Overall.
7G
53.New, Hydraulic Power Unit with Oilair Pump, Parker Bladder Accumulator, 59"x18"x30" Reservoir and Baldor 7.5HP 230/460V 3-Phase Motor. Approx 61"x48"x42"
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

54.New, Sealed Box, Axis P5635-E 60Hz Network Camera. Continuous 360-Degree Pan, 30x Zoom, 1080p, s/n: ACCC8E6F96F8. 9 1/2"x10"x17 3/4" Box Dimensions
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
55.Blue M Model CR07-256/C Oven. 482F Max Temperature, 21 1/2"x20"x19 5/8" Chamber, Touch Master Controls, stand, 208-240V 1-Phase, s/n: P40-191. Approx 41"x30"x70"
7G

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

56.RJG Model 2015 Universal Strain Gage Transducer Signal Conditioner with Case.
Approximate Weight:14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
57.Stanley Model CS23 Pole Type Chain Saw. Hydraulically Driven, 12" Bar, 7' Overall Length
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
58.Assorted Carbide End Mills from 3/16" to 1/2"
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
59.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 216120131
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
60.Di-Acro Model 18-48 Hydra-Power Press Brake. 48" Bed and Ram, 25" Between Housings, 6 1/2" Throat, Manual Bed Adjustment, Manual Back Gage, 208/220/440V Motor and Controls, s/n: 1-1094. Approx 48"x30"x60"

Video Available. Click on lot to view.
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

61.(2) Sunnen Dial Bore Gages without Contacts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
62.Cantilever Style Rack. 70"x175" Legs wign 66" Wide Welded Braces, (4) Sets of 48" Arms, Metal Decking. Note: Arms Adjustable/Removable, Legs & Braces Welded

Location: Bloomington, MN

63.New, Equiprite Foldable Shop Crane. 770 to 1100lb Capacity Depending on Boom Length, 81.88" Max Hook Height, s/n: GS51506109
7G
64.(2) Sunnen Dial Bore Gages without Contacts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
65.(3) Sunnen Dial Bore Gages: (1) .845", (1) .625" and (1) .485" all Approx 7 1/4" Extension Length
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
66.Sunnen Bore Gage Contact Tips, Points, Setters and Assorted Parts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
67.(2) Sandvik Capto C6 Shank Tool Holders: (1) No. C6-DCLNR-17.100-12 Insert Cutter; (1) No. C6-391.02-40-040 Reduction Adapter with No. C4-CTLHOR-17070-3 Replaceable Head Insert Cutter
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
68.Adept Technologies Inc. Model Adept Six 300 6-Axis Robotic Manipulator with Adept Technologies Model PA-4 Control, s/n: 336-008140, 200-240 volt, 3-Phase. DT Industries/Sencorp Control Panel, Assorted Wiring Power Supplies and More. (New in 2001)
7G
69.Reliance Electric Model H-6200-Q-HOOAA Brushless Servo Motor. 3000 rpm, 4.6 hp, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
70.Okuma Model MB-46VAE "Ace Center" Vertical Machining Center. 30" X-Travel, 18.11" Y-Travel, 18.11" Z-Travel, 1575 IPM X,Y Rapid Traverse, 1181 IPM Z Rapid Traverse, 40" x 20" T-Slotted Table, 1540 lb Table Load Capacity, Cat 40 Spindle Taper, (20) Tool ATC, 50-8000 rpm Spindle Speed Range, Okuma OSP-E100M CNC Controls, Chip Conveyor, Coolant Tank, Cool Jet Systems Chiller, 6" Machine Vise, 15 hp, 220/480 volt, 3-Phase, s/n: 105752 (New in 2003), Approx. 144" x 192" x 108" Overall and 14,300 lbs. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

Location: Blaine, MN

Video Available. Click on lot to view.

71.(2) Mitutoyo No. 29225 .0005" Indicators and (1) Mitutoyo 7" Standard
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
72.RFL Electronics Model 5800 Meter Calibration System. 600V 100A Capacity, Single/Polyphase, Electromechanical Watthour/Solid State/Reactive/VA/Demand and Other Special Purpose Meter Types, s/n: 232. Approx 22"x36"x34"
7G
73.(4) Micron Model BK40-1041-GAH 4.0 KVA Control Transformers. 4000/26390 (VA) Output. 9" x 8" x 11" Overall.
7G
74.Large, 2-Compartment Electrical Enclosure. 18" Deep, 84" High, Right Side: 2-Door 74" Wide, Left Side: Single Door, 34" Wide, Approx 112"x21"x86 1/2"
Out

Fork Lift for Hire has Quoted $100 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

75.Tennant No. 527 Power Scrubber, LP Powered, Hydraulic System Operates Propelling, Scrub Head Lift, Squeegee Lift and Scrub Brush Drive, Standard Solution Tank - 65 Gallons, Recovery Tank - 68 Gallons, Scrub Brush Path Width - 43" , 847 Indicated Hours, s/n: 1457, Approx. 108"x52"x60", Approx. 4,000lbs, NOTE: LP Tank NOT Included.

Video Available. Click on lot to view.
Ship

76.New, Unsealed Box, Axis P5635-E 60Hz Network Camera. Continuous 360-Degree Pan, 30x Zoom, 1080p, s/n: ACCC8E637B19. 9 1/2"x10"x17 3/4" Box Dimensions
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
77.Wolden 2-Post Quick Change Die Set. Approx 27"x15 1/4"x18"
A51
78.CM Lodestar 1/4 Ton Chain Hoist w/ Pendant Control, Basket and Trolley, 16 FPM Speed Rate, 208/220-480 V. 3PH.
2-1
79.(2) Sandvik Capto C6 Shank Insert Tool Holders: (1) No. C6-DCLNR-100-12; (1) No. C6-R166.4K07S-16
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
80.Mighty Viper Model 1500P Vertical Machining Center. 67"x29 5/8" T-Slotted Table, 60.3" X-Axis Travel, 30.9" Y-Axis Travel, 18" Z-Axis Travel, Variable Spindle Speeds to 8000RPM, Cat 40 Spindle Taper, 3000lb Max Table Load, 24-Position ATC, 590IPM Rapids, Rigid Tapping, TurmOil Spindle Chiller, Chip Auger/Conveyor, Coolant, Full Enclosure, 20HP Spindle Motor, 3-Phase, Mitsubishi Meldas 500 CNC Control, s/n: 000637. Approx 15'x11'x10' and 25,000lbs.

Location: Chicago, IL

Video Available. Click on lot to view.

81.Cadillac Model D1005-3 6" Pla-Chek Height Gage, s/n: 14484G
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
82.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 216120132
3-2
83.Pair of Jost Landing Gear Jacks. Approx 18" Lowered Height, Includes Handles
7G
84.(2) Hoffman Electrical Enclosures with Assorted Components Including (1) Top Mounted Transformer on Each. Approx 36"x24"x72" (Dimensions Not Including Transformer)
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

85.Cantilever Style Rack. 132" Tall Uprights with 72" Wide Welded Braces, (4) Sets of 48" Arms, Metal Decking. Note: Arms Adjustable/Removable, Legs & Braces Welded

Location: Bloomington, MN

86.Tesa Inside Micrometer with Extensions to Approx 5' and Wooden Container
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
87.Standard No. 2/0 Dial Bore Gage. 1/4" to 3/8" Range, .0001" Grads, Wooden Case
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
88.(2) Indicator Stands: (1) Red Cap, 14" Tall and (1) 13 3/8" Tall
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
89.Sandvik Coromat Model C6-MAS Size C-6 12" Test Indicating Bar with Fitted Case, s/n: 2030
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
90.LeBlond Makino Model EDNC 43 Electrical Discharge Machine. Sinker Type, 23.559"x19.685" T-Slotted Table, 17.716" X-Axis Travel, 13.779" Y-Axis Travel, 13.779" Z-Axis Travel, 33.464"x25.590"x15.748" Inside Tank Dimensions, 2200lb Max Table Load, 165lb Max Electrode Weight, 50-Gallon Work Tank Capacity, Drop Tank, Dielectric Filtration, Dielectric Cooler, (2) 55-Gallon Drums of Dielectric Fluid, Makino MGE20 Control, 3-Phase Electrics, s/n: CA2-250N. Approx 56"x89"x100" (Machine) 26"x42"x74" (Control) 18"x19"x32" (Chiller) 48"x24"x38" (Dielectric Tank) adn 9200lbs
Main

Fork Lift for Hire has Quoted $250 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

91.(2) New, Allen-Bradley MT-GD2 Safety Switches with Cableing
Approximate Weight:30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
92.Kurt Model HDLM6 6" Double Lock Precision Machine Vise. No Jaws, s/n: 2991
Approximate Weight:88lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
93.Sears Model 358.351580 Chainsaw. 18" Bar, 40CC Engine, s/n: 99327D101519
Approximate Weight:13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
94.Reliance Electric Cat. No. H-6300-Q-HOOAA Brushless Servo Motor. 3000 rpm, 6.8 hp, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
95.New, Wittenstein Item 10013380 Planetary Gear Head.
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
96.(5) Mahr 1-2" Micrometers with Carbide Anvils.
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
97.Nordson Sealant Equipment Unit. Approx 31"x16"x14"
7G
98.(2) Bausch & Lomb 20x Brinell Scopes: (1) Ul5620 and (1) BB9566
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
99.(3) Starrett Model 1150 Snap Gages. 2", 4", 8".
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
100.Bliss Model 75-36-24 OBI Punch Press. Flywheel Type, 75-Ton Capacity, Air Clutch, 6" Stroke, 4 1/4" Slide Adjustment, 90SPM, 36"x24" Bed with 3 1/2" T-Slotted Bolster, 24"x18 1/2" T-Slotted Ram, 18" Opening in Back, Safety Guarding, Single/Inch/Continuous Operation, Surge Tanks, Control Pedestal with Dual Palm Buttons, 480V 3-Phase Motor and Controls, s/n: HP23761. Approx 62"x88"x103"

Location: Mankato, MN

Video Available. Click on lot to view.

Cullinan Rigging is prepared to quote a loading price for this machine. Please contact Brandon: 763.422.9141 or brandon@cullinanrigging.com

101.Metal Frame Table with Jost Landing Gear Jack. 49 1/2"x19 1/2"x31"
7G
102.(4) New SMC MX20TN-50 Air Slide Tables
Approximate Weight:12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
103.Hundreds of Metric Fasteners. All Bagged & Tagged with Size. Bolts, SHCS, Washers, Nuts, etc
7G
104.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 21600065
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
105.Seco p/n: R220.48-03.00-09-06 3" Insert Type Shell Mill. (Like New)
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
106.RFL Electronics Model 5800 Meter Calibration System. 600V 100A Capacity, Single/Polyphase, Electromechanical Watthour/Solid State/Reactive/VA/Demand and Other Special Purpose Meter Types, s/n: 121. Approx 22"x36"x34"
7G
107.New, Sealed Box, Axis P5635-E 60Hz Network Camera. Continuous 360-Degree Pan, 30x Zoom, 1080p, s/n: ACCC8E71C366. 9 1/2"x10"x17 3/4" Box Dimensions
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
108.49"x21"x72" Metal Cart
7G
109.Cantilever Style Rack. 69"x157" Legs wign 66" Wide Welded Braces, (5) Sets of 48" Arms. Note: Arms Adjustable/Removable, Legs & Braces Welded

Location: Bloomington, MN

110.2014 Larke Tandem Axle Enclosed Cargo Trailer. 20', 10,000lb GVWR, Ramp Rear Door, Side Access Door, Tongue Jack, 2 5/16" Ball Coupler, VIN: 571BE2022EM002504
Out
111.Current Tools PVC Heater, Model No. 451. 1/2" - 4" PVC Conduit. 9"x52"x12".
7G
112.(2) Protemp 70,000 BTU Kerosene Heaters, Model: PT-70T KFA. 10"x31"x14" ea.
7G
113.(6) 5 gallon Safty Gas Cans.
7G
114.Motion Motorized Rotary Table. 22" Diameter, 14" Table Height, 230/460V 3-Phase Motor. Aprpox 30"x40"x14"
7G
115.(3) Sets Husky Halogen Lights, (2) Include Stands.
7G
116.Shamrock 12"x8"x10" Angle Plate
3-R2L
117.New, Festo Valve Terminal. 25"x7"x3 3/4"
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
118.(2) New Festo Pneumatic Assemblies
Approximate Weight:28lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
119.New, Renishaw TS27R Contact Tool Setting Probe with Assorted Cableing and Accessories
Approximate Weight:20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
120.DoAll Model C-12 Horizontal Band Saw, 12" x 12" Rated Capacity,(4) Step Pulley for Speeds of 90, 125, 180 & 250 fpm, 1" x132" Blade, Hydraulic Blade Tensioning, Hydraulic Downfeed, Coolant, 1-1/2 HP, 220 Volt, 3 Phase, s/n 114-58249, Approx. 82"x32"x62", Approx. 1,500 Lbs.
Main

Fork Lift for Hire has Quoted $100 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

121.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 21600071
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
122.Approx 40' Drop Cord with Ground and (3) Conductors. 5/16" Approx Diameter of Each Conductor
3-R2L
123.(2) Incomplete Assemblies with Assorted Pneumatic and Electrical Components, Hoses and Cables
7G
124.13 7/8" Diameter First Surface Mirror. 1" Thick
Approximate Weight:13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
125.Festo Pneumatic Linear Drive
7G
126.(4) Submersible Pumps with (7) Hoses.
7G
127.Reliance Electric Cat. No. H-6300-Q-HO4AA Brushless Servo Motor. 3000 rpm, 6.8 hp, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
128.New, Unsealed Box, Axis P5635-E 60Hz Network Camera. Continuous 360-Degree Pan, 30x Zoom, 1080p, s/n: ACCC8E637B1D. 9 1/2"x10"x17 3/4" Box Dimensions
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
129.Assorted Tools. Including: (6) Shovels and (2) Rakes.
7G
130.Miyano Model BND-34S2 Turning Center. 4-Axis Machine, 1.34" Bar Capacity, 11.02" Machining Length, 4.92" Turning Diameter, 5.5" X-Axis Travel, 11.02" Z-Axis Travel, Variable Spindle Speeds to 5000 RPM, 8-Position Turret, Live Tool Positions, 5000RPM Sub Spindle, Parts Catcher, Chip Conveyor, Fanuc Series O-T CNC Control, 10HP Main Spindle Motor,230V 3-Phase, s/n: 3116sB2. Approx 120"x64"x71" and 8000lbs
A51

Fork Lift for Hire has Quoted $275 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

131.New, Wittenstein Item 10013380 Planetary Gear Head.
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
132.(5) Ratchet Style Chain Binders
Approximate Weight:60lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
133.(2) Greese Pumps with Greese and Assorted Pneumatic/Hydraulic Components
7G
134.Seco p/n: A24-CTFPR-3 Insert Type Boring Bar. 14" L and 1-1/2" Diameter. (NEW)
2-1
135.Rock River Job Box. Hinge Needs Repair. 48"x24"x29".
7G
136.Chain Pipe Vise on Tripod Stand. 1/8"-6" Cap.
7G
137.Assorted Mostly Tescom Brass Fittings
Approximate Weight:22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
138.Dallmeyer MKII 10x Lens. 7 1/2" Long
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
139.Tesco 1120 Series Electrical meter Test Facility. 240V 3-Phase Supply, 120/208/240/277/480V Test, 5/10/20/30/50/100/200A Test Current, On Wheels, 1700lbs. Approx 54 1/2"x41"x72 3/4"
7G

Fork Lift for Hire has Quoted $100 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

140.Premier Model 440-2 Hydraulic Press Brake. 40- Ton Capacity, 48" Bed Length, 6-1/2" throat, 37" between Uprights, Hurco Autobend 7 CNC Back Gage, 5 hp, 460 volt, 3-Phase, s/n: 184, Approx. 70" x 64" x 78" Overall and 4100 lbs. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
Location: Blaine, MN
141.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 21600073
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
142.Powertran Cat No. NF480L3000 Single Phase Transformer. 3KVA, 240X480 Primary Voltages, 120V Secondary, 10"x15"x8"
7G
143.Greenlee 851 Electric PVC Heater- 1/2"-4" Capacity. 8"x54"x12".
7G
144.RFL Electronics Model 5800 Meter Calibration System. 600V 100A Capacity, Single/Polyphase, Electromechanical Watthour/Solid State/Reactive/VA/Demand and Other Special Purpose Meter Types, s/n: 465. Approx 22"x36"x34"
7G
145.Craftsman Model 358.351061 Chainsaw. 16" Bar, 2.2 CI Engine, 40:1 Gas/Oil Mix Ratio
Approximate Weight:12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
146.Reliance Electric Model BRU-500 Drive Module.
7G
147.Approx (28) SMC NCMC125-1000 Pneumatic Cylinders. 250psi Max Pressure, 10" Stroke
Approximate Weight:46lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
148.(3) Conduit Benders. 1" EMT. 3/4" Rigid, 3/4" IMC
Approximate Weight:30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
149.New, Sealed Box, Axis P5635-E 60Hz Network Camera. Continuous 360-Degree Pan, 30x Zoom, 1080p, s/n: ACCC8E637B1D. 9 1/2"x10"x17 3/4" Box Dimensions
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
150.Comp Air/Kellogg 25 hp Air Compressor. 230/460 volt, 3-Phase, Horizontal Receiver Tank, Hour Meter Reads 26,854, Approx. 64" x 48" x 74" Overall. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
Location: Blaine, MN
151.(5) Assorted Staps, Lifting and Ratchet.
Approximate Weight:27lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
152.(2) Submersible Pumps with (5) Hoses.
7G
153.Assorted Roxtec Wedge Kits and Modules
Approximate Weight:26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
154.Pallet of Assorted Wire.
7G
155.Cantilever Style Rack. 69"x151" Legs wign 59" Wide Welded Braces, (4) Sets of 48" Arms. Note: Arms Adjustable/Removable, Legs & Braces Welded

Location: Bloomington, MN

156.Metal Frame Table with Jost Landing Gear Jack. 49 1/2"x19 1/2"x31"
7G
157.(2) 990lb Capacity Swivel Hoist Rings
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
158.(2) Assemblies with Assorted Components
Approximate Weight:29lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
159.Pair of Jost Landing Gear Jacks. Approx 18" Lowered Height, Includes Handles
7G
160.Mitutoyo Model AE-1220 Coordinate Measuring Machine. Manual Type, 20"x16"x8" Measuring Envelope, 29 1/4" Between Rails, 16 3/4" Under Bridge, Brown & Sharpe TP-ES Probe, Quadra-Chek 300 Advanced Digital Readout, s/n: 810198. Approx 38"x33"x54"
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

161.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 21600070
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
162.Approx (30) Assorted TG100 Collets
Approximate Weight:13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
163.Sho-Vac 1X1 Wet/Dry Vacuum 1-Gallon Capacity, 1HP; Assorted 120V Charger; (5) Assorted Power Outlets/Strips
Approximate Weight:20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
164.Crate of Assorted Items: New Bearings, Pully, Time Card Racks, Misc Components, etc. Crate Dimensions: 72"x30"x30"
7G
165.Acme Type PTO-24-50 Press Type Spot Welder. 50KVA @ 50% Duty Cycle, 24" Throat, Unitrol Solution Solid State Control, 230V 1-Phase, s/n: 13417. Approx 36"x62"x90"
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

166.Hundreds of Metric Fasteners. All Bagged & Tagged with Size. Bolts, SHCS, Washers, Nuts, etc
7G
167.Seco p/n: R220.90-02.50-26 Indexable Milling Cutter (New)
2-1
168.(5) Packs of Sumitomo CNMG544EUX Carbide Inserts. (NEW)
2-1
169.(5) Packs of NTK CNGA4320.2SX8 Insert Spacers. (NEW)
2-1
170.Curtis Model R/S 10 Air Compressor. Rotary Screw Type, 79,127 Hours on Meter, 38 CFM Output, 175psi Max Working Pressure, 10HP 208V 3-Phase Motor, s/n: 049900900799. Approx 28"x23"x34"
A51
171.Procunier Model 1 Tapping Head. No Shank
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
172.(2) System 3R 3R-466.5033 Electrode Holders
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
173.(2) Reliance Electric Electro-Craft 5000 Positioning Drive Modules.
7G
174.Standridge 36"x24"x4" No Lip Granite Surface Plate with 2-Door Cabinet and Rolling Base. 42 1/2" High
7G

Fork Lift for Hire has Quoted $40 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

175.VanAir Model RAD-40 115-1-60-X Refrigerated Compressed Air Dryer. 40SCFM Capacity at 100psi and 100 DegreeF Ambient, 115V, Mounted on Silvan Vertcal Receiver Tank, Approx 120-Gallon Capacity, 35"x28"x69, s/n: 99YY1A-WF457-06A
A51

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

176.RFL Electronics Model 5800 Meter Calibration System. 600V 100A Capacity, Single/Polyphase, Electromechanical Watthour/Solid State/Reactive/VA/Demand and Other Special Purpose Meter Types, s/n: 508. Approx 22"x36"x34"
7G
177.Assortment of Step Ladders. Appros (28) Total Including (12) 6', (10) 8' and (6) 4'. Brands Include Werner, Louisville and Rock River
Out
178.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 216120135
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
179.Revco Model ULT-659 Ultra Low Temperature Freezer. 47 1/2"x15"x17 1/4" Chamber, 110V, s/n: 15770. Approx 61"x34"x43" (Lid Closed)
7G

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

180.Sunnen Model MBC-1801 with Power Stroke, I.D. Range: .06" to 3.75", (12) Spindle Speeds: 200-2,500 RPM, (5) Stroke Rates: 80-310 spm, Stroke Lengths: 1/4" to 6", 230/460 Volt, 3 Phase, s/n: 83305, Approx. 50"x56"x62" and 1200 lbs.
Main

Fork Lift for Hire has Quoted $100 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

181.Motion Model EDA560/0360/4 Motorized Rotary Table. 22" Diameter, 14" Table Height, 230/460V 3-Phase Motor. Aprpox 30"x40"x14"
7G
182.Assorted Hardware Including Cap Screws, Hangers, Fence Camps, Clamps, Brackets and More
183.New, Festo Valve Terminal. 25"x7"x3 3/4"
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
184.(3) System 3R Short Drawbars, (3) Macro Electrode Holders and Assorted Graphite
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
185.(2) Crates of Assorted Wire
7G
186.Hydrotek Electric Pressure Washer. Cat Pump, Wall Mount, Hose, 6 1/2HP 230V 1-Phase Motor, s/n: 200002217. Approx 20"X16"x30" Note: No Wand.
A51
187.(2) New Gudel H1 Flexx Pumps
Approximate Weight:13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
188.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 216090116
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
189.Cantilever Style Rack. 66"x156" Legs wign 66" Wide Welded Braces, (4) Sets of 48" Arms. Note: Arms Adjustable/Removable, Legs & Braces Welded

Location: Bloomington, MN

190.Bliss Model 75-36-24 OBI Punch Press. Flywheel Type, 75-Ton Capacity, Air Clutch, 6" Stroke, 4 1/4" Slide Adjustment, 90SPM, 36"x24" Bed with 3 1/2" T-Slotted Bolster, 24"x18 1/2" T-Slotted Ram, 18" Opening in Back, Die Cushion, Safety Guarding, Single/Inch/Continuous Operation, Surge Tanks, Control Pedestal with Dual Palm Buttons, 480V 3-Phase Motor and Controls, s/n: HP23416. Approx 62"x88"x103" Note: Die and feeder not included.

Location: Mankato, MN

Cullinan Rigging is prepared to quote a loading price for this machine. Please contact Brandon: 763.422.9141 or brandon@cullinanrigging.com

191.31" Dia. Optical Comparator Lense with Plastic Overlay.
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
192.(3) Assorted Cat 40 Tool Holders: (1) Lyndex C40 55-562; (1) Briney V40BR-20-525 Collet Type and (1) Command C4S-1500 Shell Mill Type
Approximate Weight:12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
193.Pneumatic Assembly with Tank and Assorted Components
7G
194.Approx (24) Assorted TG100 Collets
Approximate Weight:12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
195.2-Station Lapping Machine. 6" Lap Width, 110V Motor, Stand, Approx 35"x24"x44"
7G
196.Reliance Electric Model BRU-500 Drive Module.
7G
197.Scherr Tumico 0-1" Indicating Micrometer. .0001" Resolution, Hardened Anvils, Fitted Case
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
198.(5) Mahr Dial Indicators, .0002"
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
199.System 3R 3R-610.21 Manual Chuck
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
200.Nomura Model NN-135 CNC Swiss Type Automatic Screw Machine w/ Fedek Mini Swiss HM-20 Bar Feeder, Machining Cap: 13 MM. Max Working Dia, 100MM Max Working Length, 8MM Max Drilling Dia., Max Tapping Dia. 1/4-20 UNC (M6), Headstock Specs: 14MM Main Spindle Through Hole Dia., 300-10,000 RPM Main Spindle Speed, Tool Post Specs: (5) OD Tools, 3/8" Qu.x5.12" Max Square Tool Size, (3) Face/Back Drills, (10MM) {ER-16} Face/Back Drill Chuck Dia., 23MM Double Drill Holder Dia., (3) Cross Slide Drills, 7MM {ER-11} Max Cross Drill Chuck Dia., 200-8,000 RPM Cross Drill Speed, Back Machining Specifications: 13MM Max Tool Side Working Dia., 80MM Max Tool Side Working Length, 6MM Max Tool Side Drilling Dia., M5/12-24 UNC Max Tool Side Tapping Dia., Manuals, Overall: Machine Measures 60"x36"x68", 220V. 3Ph. 50 Amps(Full Load), s/n: 08080-04

Video Available. Click on lot to view.
A51

Fork Lift for Hire has Quoted $175 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

201.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 216100074
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
202.(2) Dynaquip Model PHH23ATDA032 Pneumatic Atuators with 1/2" Ball Valves. 73 in/lb Torque @ 80psi
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
203.Linear Actuator. Approx 6" Stroke
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
204.Pallet of Assorted Wire and Communication Cable
7G
205.(3) Assorted Pump Sprayers: (1) 3-Gallon with Shoulder Strap; (1) Ortho Spray Sense; (1) RL Flowmaster, 2.5 Gallon with Wand
Approximate Weight:15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
206.(2) Electric Outdoor Tools: (1) Homelite Model EL-114 14" Chainsaw; (1) Greenworks Model 24012 Blower
Approximate Weight:14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
207.Assorted Leoni Cable Management Hardware
7G
208.(5) Chain Binders: (3) Durabilt Ratchet Type, 6600lb Capacity, 3/8" Grab Hooks; (2) China Made, 5400lb WLL
2-1
209.Reliance Electric Model PSM-50 Power Supply Module. 120/240 volt, 3-Phase.
7G
210.Nakamura-Tome Type TMC-20. Combination Type, 15.7" Swing, 19.6" Machining Length, 9.87" Turning Diameter, 1.65" Bar Capacity, Variable Spindle Speeds to 4500RPM, 10-Position Turret, 6 1/2" 3-Jaw Chuck, Fanuc CNC Control, s/n: 16202. Approx 82"x52"x68" Note: Missing Z-Axis Motor
A51

Fork Lift for Hire has Quoted $250 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

211.ROCK RIVER, RR-3016-08, 8' LADDER, 300 LB CAPACITY
7G
212.Assorted Office Items: (1) 48"x29 1/4"x30 1/2" Rolling Table; (1) 36"x12"x42" Book Shelf and (1) 36"x13 1/2"x42" Book Shelf
7G
213.Grizzly Model G0557 Box & Pan Brake. 24"x20 GA Capacity in Mild Steel, Complete Set of Fingers, 1" to 4" Finger Width, s/n: E11268. Approx 30"x12"x15"
Main
214.Reliance Electric Model PSM-50 Power Supply Module. 120/240 volt, 3-Phase.
7G
215.(2) Gage Master Dial Bore Gages: (1) 2.490" (1) 2.472"
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
216.(2) SECO Leveling Rods Surveyors Bipod-Flo Orange. Hold Rectangular Rod, Fits Rods Between 1.57"- 2.56"
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
217.Pair of Jost Landing Gear Jacks. Approx 18" Lowered Height, Includes Handles
7G
218.Cantilever Style Rack. 57"x132" Legs wign 72" Wide Welded Braces, (4) Sets of 48" Arms. Note: Arms Adjustable/Removable, Legs & Braces Welded

Location: Bloomington, MN

219.Reliance Electric Model BRU-500 Drive Module.
7G
220.Timesavers Model 137-1HDMW Wide Belt Grinder. Wet Type, 37" Wide Grinding Belt, 35 1/2" Wide Feed Belt, Variable Speed Feed, Air Knife, Blower, Coolant Tank, Extra New and Used Belts, 20HP360V 3-Phase Motor and Controls, s/n: 25792M. Approx 79"x91"x90" (Machine) 30"x40"x43" (Blower) 80"x50"x32" (Tank)

Video Available. Click on lot to view.
Main

Fork Lift for Hire has Quoted $225 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

221.(3) Cabinets: (2) 10-Drawer (Missing Drawers) 19 1/4"x28"x52 1/2" Each; (1) 2-Door with (2) Adjustable Shelves, 36 1/4"x18 1/2"x42"
7G
222.Assembly with Assorted Pneumatic, Electrical and Mechanical Components. 29"x15"x14"
Approximate Weight:53lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
223.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 216100066
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
224.(4) Coils of Communication Cable
Approximate Weight:52lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
225.Boyar-Schultz Model H612 Surface Grinder. Hand Feed Machine, 6"x12" Rated Capacity, 7" Wheel Capacity, Approx 12" Max Between Spindle and Chuck, 6"x12" Permanent Magnetic Chuck, One-Shot Lube, 1HP 208-220/440V 3-Phase Motor and Controls, s/n: 25160. Approx 32"x48"x67"
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

226.(3) Scher Tumico Dial Bore Gages. .001" Increments, 10" Length
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
227.Assorted Bore Gage Parts and Hundreds of Contact Points
Approximate Weight:17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
228.Sunnen Dial Bore Gage with (7) Rod Tips. Approx 2.250" to 4", 14" Length Shank, .0001" divisions, Wooden Case
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
229.Approx (36) Assorted TG100 Collets
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
230.Minster No. 9 OBI Punch Press. Back Geared Type, 106-Ton Capacity, 9" Stroke, 3 1/2" Slide Adjustment, 37 SPM, 45"x28" Bed with 4 1/2" Bolster, 24"x16" Ram with 3" Round Shank Hole, 25 1/2" Opening in Back, Dual Palm Buttons, Die Cushion, Surge Tank, No Control, 460V 3-Phase Motor, s/n: 9-6450. Approx 65"x94"x156" and 32000lbs

Location: Mankato, MN

Cullinan Rigging is prepared to quote a loading price for this machine. Please contact Brandon: 763.422.9141 or brandon@cullinanrigging.com

231.Assorted Shafts and Rollers
7G
232.Reliance Electric Model PSM-50 Power Supply Module. 120/240 volt, 3-Phase.
7G
233.(2) New Power Strips and (2) Coils of Communication Cable
Approximate Weight:30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
234.Reliance Electric Model BRU-500 Drive Module.
7G
235.(3) Standard No. 4 Dial Bore Gages: (2) 2 1/8" to 3 1/8" Measuring Range, (1) 54 to 79mm Measuring Range, Missing Rod Tips
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
236.(2) New SMC MGPS50-25 Single Rod Guided Air Cylinders. 50mm Bore, 25mm Stroke
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
237.Assorted Items: (4) Baluf BGL0009 Sensors; (1) Keyence FS-V31p Amplifier; (2) Elastomer Couplings; (1) Roxtec Aluminum Compression Unit
Approximate Weight:7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
238.(3) Filter Assemblies: (1) FSI Model BFMP12, 150psi, 12"x12"x50" and (2) Pall, 15"x59"
7G
239.Hemco Dial Bore Gage. 2" to 6" Range, 12" Shank, Missing Rod Tips
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
240.LNS Model QL Servo S2 Magazine Type Barfeed. 1/4" to 4.7" Round Bar Diameter Range, 5.1" to 63" Length Range, 132lb Max Bar Weight, 39" Magazine Depth, Pendant Control, 3-Phase, s/n: 300614. Approx 96"x60"x60"
A51

Fork Lift for Hire has Quoted $100 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

241.(2) 1-2" Indicating Micrometers with Carbide Faces: (1) Etalon, (1) Carl Zeiss
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
242.Enco Model 160-1030 Double End Bench Grinder with Stand. 10" Wheel Capacity, 1725RPM, 220V 3-Phase. 24"x29"x50"
7G
243.New, Sealed Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 216090117
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
244.Assorted Control Buttons with Enclosures and Indicator Lights
7G
245.Ingersoll-Rand Model 50H-SP Rotary Screw Air Compressor, Capacity (ACFM) 205, Rated Operating Pressure (PSIG) 125, Max. Discharge Pressure (PSIG) 128, 50 HP, 230/460 Volt, 3 Phase, s/n: H0757U87C, Approx. 63"x46"x37".
Main

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

246.(3) Spools of Hose: (1) 1/2", 500psi, Marked 220'; (2) 3/4", 200psi, Marked 350'
A51
247.Approx 144' of Multi-Conductor Cable. 3/4" Overall Diameter
Approximate Weight:71lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
248.Pallet of Assorted Refrigeration and Other Components
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

249.Reliance Electric Model PSM-50 Power Supply Module. 120/240 volt, 3-Phase.
7G
250.Hardinge Super Precision Model CHNC Computerized Numerical Control Bar and Chucking Machine w/ Allen Bradley 7370 Control, 12" Swing, 18" Centers, 8 Station Turret, 5C Collet w/ Pneumatic Closer, Parts Chute, Set Up for Coolant, Verticle Tool Slide, Spindle Speed From 30 Up to 3000 RPM,Spindle Cap: 1-1/16" w/ 5C Collets, 9" Maximum Fixture Dia., 12-1/2" Max Distance From Turret Face to Spindle, 12" Carriage Travel, 4-1/2" Cross Slide, 200" Max Feed Rate per Minute, Manuals, 220V, 3Ph. Overall: 77"x58"x82", S/N: CNC-138

Video Available. Click on lot to view.
Note: Spare Control and Circuit Boards for Control Available. Bar Feeder Available. See Items 652, 653 & 653.1
A51

Fork Lift for Hire has Quoted $250 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

251.24 Drawer Parts Organizer w/ Contents of Mainly Assorted Standard Screws of All Types Including: Self Tapping, Round Head, Pan Head, Hex Head, and More Shown. Cabinet Measures: 37"x17"x10-1/2".
A51
253.Sylvania 1-Phase Transformer. 100KVA, 240X480-120/240 Voltage, 640lbs, Includes Square D 200A 600V Safety Switch. Approx 26"x23"x38"
A51

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

254.Approx (24) Assorted TG100 Collets
Approximate Weight:13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
255.(2) Reliance Electric Model PSM-50 Electro-Craft Power Supply Modules. 120/240 Volt, 3-Phase Input.
7G
256.Assorted Metric Bolts Including (80) M20x150
7G
257.(12) Assorted Bore Gage Extension Rods and Heads up to 9"
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
258.Misc Items: Hose, Manifolds, Shafts and More
7G
259.Reliance Electric Model BRU-500 Drive Module.
7G
260.Gray Model WPLS-160F Wireless Portable Lift System. 16,000lb Capacity/Lift, Approx 60" Max Lift Height, Small Wheel Attachment, May Be Used in Pairs or Set of Four, On-Board 110V Chargers. Approx 41"x48"x92" Each when Lowered. Note: Hoff staff have been unable to establish communication between units.
Main

Fork Lift for Hire has Quoted $200 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

261.(2) Assorted Dial Bore Gages. (1) Mitutoyo No. 545-134, 1.475" to 2.075", .0001" and (!) Standard Model D1-20241-B, .0001", 1" to 1.53".
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
262.Block 3-Phase Transformer. 230V Input, 400/230V Output, Approx 17"x10"x14 and 282lbs
7G
263.Assorted Electrical: Square D 200A 600V Safety Switch, Conduit, Motor, etc
7G
264.Assorted New Pneumatic Components: Filters, Cylinders, Etc
Approximate Weight:22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
265.Testing Apparatus with Surge Tank and Gages, On Wheels, 22"x32"x49 1/2"
7G
266.New, Open Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 215070042
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
267.Machine Table with 1/2" T-Slots. 24"x22"x 1 3/4"
7G
268.(2) Custom Fixtures: (1) 30"x12"x11" and (1) 14"x14"x12"
7G
269.(2) Reliance Electric Model PSM-12S Electro-Craft Power Supply Modules. 120/240 volt, 3-Phase Input.
7G
270.Simon Aerials Model L2034E Scissor Lift. 20' Max Platform Height, 750lb Platform Capacity, 28"x96" Platform with 28" Extension, 250lb Extension Capacity, 20' Max Travel Height, On-Board 110V Charger, 24V System, Cushion Tires, Ground Lift/Lower Controls, Platform Joystick Controls, 74" Lowered Height, s/n: EDB02392. Seller Notes: Batteries Replaced Last Year

Video Available. Click on lot to view.
Ship

271.Trimos 12" height Gage. (Parts Only)
Approximate Weight:23lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
272.Assorted Inspection Including: Reliant Dial indicators, .0001", Test Master .0001" Gage and More.
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
273.Large Lot of 32oz. Plastic Spray Bottles (100+) No Sprayers.
A51
274.Reliance Electric Model BRU-500 Drive Module.
7G
275.Brother Model BT2-223 "Hi-Tap" Tapping Machine. 7 1/2" Throat, 20"x18" Table Area In Front of Column, (3) Speeds: 190 to 620 RPM, Assorted Feed Change Gears and Tap Holders, 220V 3-Phase Motor and Controls, s/n: 115208. Approx 26"x41"x77"

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

276.24 Drawer Parts Organizer w/ Contents of Hardware Including Hundreds of Assorted Screws, Rivets, Set Screws, Grooved Pins, and More. Overall Cabinet Measures: 34"x17"x10-1/2".
A51
277.Approx (24) Assorted TG100 Collets
Approximate Weight:13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
278.16" Bench Center, 6" center Height.
Approximate Weight:61lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
279.Dust Collection Bag and Cyclone. No Motor/Blower. Cyclone: Approx 61"x46"x116"; Bag Approx 40"x40"x64"
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

280.Niagara Model Ad-1/2 OBI Punch Press. 45-Ton Capacity, Air Clutch, 12.25" Shut Height, 3" Stroke, 2 5/8" Slide Adjustment, 100SPM, 28"x18" Bed, Air Cushion, Winter's Brake, s/n: 33807

Location: Mankato, MN

Cullinan Rigging is prepared to quote a loading price for this machine. Please contact Brandon: 763.422.9141 or brandon@cullinanrigging.com

281.(3) Dyer Gages. (2) Model 335-005-15770 and (1) 335-003-15770.
2-3
282.(2) Assorted Snap Gage Type Calipers. (1) Mitutoyo 201-157, 6" to 7" and (1) Dorsey Gage.
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
283.Reliance Electric Model PSM-50 Power Supply Module. 120/240 volt, 3-Phase.
7G
284.3M Model A80F Case Sealer. Top/Bottom Seal, Approx 24"x24" Max Case Size, Adjustable Height Frame, 115V. Approx 114"x40"x85"
A51

Fork Lift for Hire has Quoted $225 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

285.New, Open Box, Micro-Epsilon Model 2950-100 scan/CONTROL 2D/3D Laser Scanner. 190mm to 290mm Z-Axis Measuring Range, 83.1mm to 120.8mm X-Axis Measuring Range, up to 300Hz Profile Frequency, 25-Degree Aperture Angle Laser Line, s/n: 216020045
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
286.(8) 5" Plastic Wheel Casters. 3 1/2"x2 1/2" Mounting Plate
Approximate Weight:19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
287.Custom Parts Washing Machine. Batch Type, 19"x11 1/4" Opening, 31" Deep, Approx 45"x49"x67"
CTR
288.Tesa Dial Bore Gage. (AS IS)
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
289.16" Bench Center, 6" center Height.
Approximate Weight:57lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
290.Strausak Model 30 Automatic Gear Hobber, Maximum Blank Dia. 35MM (Hand Loading), 19MM (Magazine Loading), Max Hobbing Length 22MM, 1" Max Hob Dia., Hob Speeds from 1160 RPM Up to 5550 by 50 Cycles, Manuals, 220V, 3-Phase, s/n: 9960. Approx Overall: 32"x30"x52", 1,370 Lbs

Video Available. Click on lot to view.
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

291.(2) Reliance Electric Model BRU-200 Brushless Servo Drives. Cat no. DM-30, 120/240 volt, 1-Phase.
7G
292.(2) Macbeth Model TD901 Densitometers.
Approximate Weight:48lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
293.(8) Assorted Step ring Gages. Sizes up to 7.8320".
3-3
294.(3) Assorted Step Ring Gages. Sizes as Shown.
Approximate Weight:36lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
295.(12) Assorted Ring Gages. Sizes up to 2.4409".
Approximate Weight:35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
296.(12) Assorted Ring Gages. Sizes up to 2.4597".
Approximate Weight:33lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
297.Reliance Electric Model BRU-500 Drive Module.
7G
298.(12) Assorted Ring Gages. Sizes up to 2.5061".
Approximate Weight:33lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
299.(12) Assorted Ring Gages. Sizes up to 3.1494".
Approximate Weight:39lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
300.LNS Model QL Servo S2 Magazine Type Barfeed. 1/4" to 4.7" Round Bar Diameter Range, 5.1" to 63" Length Range, 132lb Max Bar Weight, 39" Magazine Depth, Pendant Control, 3-Phase, s/n: 30152. Approx 96"x60"x60"
A51

Fork Lift for Hire has Quoted $100 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

301.Quincy Model 350 Reciprocatint Type Air Compressor. Approx 44 CRM Output, 120-Gallon Horizontal Receiver Tank, 10HP 230/460V 3-Phase Motora and Controls. Approx 86"x32"x66"
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

302.Assorted Electrical Items Including Conduit, Wire Nuts, Zip Ties and More
7G
303.Pair of Roll-A-Reel Spool Rollers
7G
304.Command Model PSFM-1224 Soft Touch Tool Presetter. Approx 24" Max Tool Length from Flange, 110V, s/n: 3008. Approx 21"x12"x37"
7G
305.(3) 5-Gallon Pails of Chemicals: (1) Cat Cold Weather Diesel Engine Oil (New); (1) Cat Hydraulic Oil (Mostly Empty); (1) Cat Extended Life Coolant (Mostly Full)
7G
306.Reliance Electric Model H-6200-Q-HOOAA Brushless Servo Motor. 3000 rpm, 4.6 hp, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
307.Assorted Items: Fasteners, Harnesses, Torches, Light Fixtures, Blankets & More
7G
308.Wooden Deck Flatbed Cart. 64"x30 1/2"
7G
309.Ransohoff Aqueous Recycling System with Drum
7G
310.Wilton Model 3535 Horizontal Band Saw. 7"x12" Rectangular Capacity, 7" Round Capacity, (4) Blade Speeds: 60 to 205 FPM, 3/4"x101" Blade Size, Coolant, 1/2HP 115/230V Motor, s/n: na. Approx 63"x26"x48" and 500lbs
Main

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

311.Plastic Tub with (4) Uneven Sections, Approx 60"x30"x18"
7G
312.Quality Vacuum Forming Machine. 18"x12" Platen, Heater, Timer, 110V. 26"x30"x25"
7G
313.24 Drawer Parts Organizer w/ Contents of Hundreds of Assorted Hardware Pieces, Mainly O-Rings, Cabinet Measures: 34"x17"x10-1/2".
A51
314.Assorted Machinist Items: (2) 3/4" Broaches, (1) 7/16" Broach; 0-1" Micrometer; Magnetic Base Indicator Stands
Approximate Weight:12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
315.Pallet of Assorted Electrical Disconnect Boxes and More.
A51
316.Reliance Electric Cat. No. H-6300-Q-HOOAA Brushless Servo Motor. 3000 rpm, 5.1 KW, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
317.(4) GE 15A 2-Pole Circuit Breakers
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
318.Misc Tooling, Inserts and More
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
319.Double End Paint Can Shaker.
7G
320.Marvel Model E2125PC Tilt Frame Vertical Band Saw. 20"x25" Rectangular Capacity at 0-Degrees, 20"x11.25" Rectangular Capacity at 60-Degrees, 20" Round Capacity at 0-Degrees, 11.25" Round Capacity at 60-Degrees, Variable Blade Speeds: 30 to 475 FPM, 1.25"x.042"x17' 6" Blade Size, 0-350lb Feed Force, 23" Diameter Band Wheel, 8000lb Table Load Capacity, 24" Max Feed Table Shuttle Stroke, 5HP 460V 3-Phase Motor and Controls, s/n: E212520216PC.

Location: Pine Island, MN

Video Available. Click on lot to view.

R&R Machinery Moving is Prepared to Quote a Price for Loading This Machine. Please Call Brian with Questions: 612.770.2598

321.Thermostatically Controlled 110V Outlet with Power Switch
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
322.(4) Cutler-Hammer 2-Pole 100A Circuit Breakers
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
323.18 Drawer Parts Organizer w/ Contents of Hardware Including: Spiral Pins, Dowel Pins, Retaining Rings, Brass Fittings, and More Shown, Cabinet Measures 34"x17"x10-1/2".
A51
324.(2) New Polycom Visual Concert FX VGA Adapters with Accessories
Approximate Weight:14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
325.74 1/2" Steel Johnson Bar with Neoprene Covered Wheels
7G
326.Reliance Electric Cat. No. H-6300-Q-HO4AA Brushless Servo Motor. 3000 rpm, 6.8 hp, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
327.(2) IAI Corp. Model IAI 12V 60-600 Linear Slide Actuators.
A51
328.(3) Marathon Electric Model SQE 56C17G15516AP 1HPElectric Thermally Protected Motors, 1725 RPM, 1/2" Shank w/ Keyway, 115/208-230 V.
7G
329.24 Drawer Parts Organizer w/ Contents of Hundreds of Mainly Socket Head Screws, Overall Measures 34"x12"x14".
A51
330.Hyster Model 580XL Fork Truck. 7800lb Capacity, 172" Raised Height, Lever Shift Transmission, 47" Free Lift, Side Shift, Cushion Tires, 48" Carriage, 60"x6"x2" Class 3 Forks, 83" Lowered Height, 4.3L Vortec V6 LP Engine, Aluminum Tank Included, s/n: D004V05474N

Video Available. Click on lot to view.

331.(4) Rupture Discs: (2) BS&B Size 8 and (2) Part No. 4
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
332.Assortment of Machine Control Parts and Machine Parts Including: Beckhoff Control, Line Master Surge Protector, V-Tek Inc. TM50 Control, and More Shown.
A51
333.Paint Sprayer, 0-3000 PSI Max.
3-2
334.Baldor Cat. No. IDM3774T Inverter Drive Motor, 10 hp, 1760 rpm, 1-3/8" Shaft Dia., 230/460 volt, 3-Phase, 20" x 16" x 12" Overall.
7G
335.(2) Multi-Drawer Parts Organizers, (1) 18 Drawer w/ Contents of Assorted Hardware Including: Grip Rings, Dowel Pins, Locking Washers, Screws, and More, (1) 24 Drawer w/ Contents of Mainly Standard Screws of All Head Types, Inspect Photos Closely. Overall Each Unit Measures: 34"x17"x10-1/2".
A51
336.Reliance Electric Cat. No. H-6300-Q-HO4AA Brushless Servo Motor. 3000 rpm, 6.8 hp, 240 volt, 3-Phase, 1-3/8" Shaft Diameter.
7G
337.Assorted Carbide Inserts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
338.Turbochef Model HHB2 (High H Batch 2) Commercial Impingement oven, 18"x17" Internal Compartment, 208/240 Volt Single Ph., 24 Amps, 5700 Max Input Watts, Overall: 26"x32"x22".
Main
339.(6) New Spray Guns, 3000 PSI Max.
Approximate Weight:7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
340.Conair Contract Systems Inc. Storage Silo. 5,033 Cubic Foot Usable Capacity, 281,848lbs Max Load, 56 LBS/CU. FT. Max Density, 11' 6" Nominal Diameter, 56' Nominal Height, Seismic Zone 1, 140MPH Max Wind Velocity, s/n: 612

Location: Turtle Lake, WI

341.24"x18"x4" No-Lip Granite Surface Plate
A51
342.(4) Cutler-Hammer 2-Pole 100A Circuit Breakers
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
343.Norgren Refrigerated Compressed Air Dryer. 250psi Max Inlet Pressure, 115V, Other Specs Illegible. 15"x15"x15"
7G
344.Reliance Electric Model P1810244B 10 hp Motor. 1775-3545 rpm, 1-3/8" Shaft Dia., 27" x 10" x 12".
7G
345.12 1/2" Diameter Rotary Table. Vertical/Horizontal Mount
7G
346.Reliance Electric Model BRU-500 Drive Module.
7G
347.Pallet of Assorted Electrical: Breakers, Wire Nuts, Fuses, Light Bulbs and More
7G
348.(2) Vestil Variable Height Sheet Racks. 47 1/2"x36"x41 3/4"
Out
349.(3) 36"x18"x87 1/4" Metal Shelves
Out
350.Coffing (Model EC.1016.3) 1/2 Ton Electric Chain Hoist w/ Pendant Control. 230/460V. 3Ph.
7G
351.Mac Model 18M1050-9C22 Battery Charger. 18-Cell 726-1050 AH Capacity, 180A 36V Output, 208/240/480V 3-Phase Input, s/n: F30189. Approx 27"x24 1/2"x30"
A51
352.Assorted Reamers, Adjustable Reamers and More. Mostly MT Shank
7G
353.(6) Racks of Assorted Deltronic Gage Pins
A51
354.(2) Brushless Servo Motors. (1) Reliance Electric Model H-6300-Q-HO4AA, 3000 rpm, 6.8 hp, 1-3/8" Shaft Dia. 240 volt, 3-Phase, (1) Allen Bradley H-6200-Q-HOOAA, 3000 rpm, 3.4 kw, 240 volt, 3-phase, 1-3/8" Shaft Dia.
7G
355.Assorted Arms for Cantilever Racking. Fit Lots 36, 62, 85, 109, 155, 189 & 218

Location: Bloomington, MN

356.Reliance Electric Model PSM-50 Power Supply Module. 120/240 volt, 3-Phase.
7G
357.(12) Assorted Ring Gages. Sizes up to 3.3463".
Approximate Weight:38lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
358.(5) Assorted Ring Gages. 3.5436", 3.5439", 3.9331", 3.9404", 3.9405".
Approximate Weight:32lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
359.(10) Assorted Cat 50 Tool Holders: (3) Parlec C50-15H6 Collet Style and (7) Command End Mill Style 1/4" to 1/2" Capacity
7G
360.DoAll Model TF1421H Tilt Frame Vertical Band Saw. 21"x14" Capacity at 90-Degrees, 14"x14" Capacity at 45-Degrees, Variable Blade Speeds: 105 to 275 FPM, 171"x1"x.035" Blade Size, 1000lb Table Capacity, Coolant, Hydraulic Vise, 2HP Blade Drive Motor, 230V 3-Phase Motor and Controls, s/n: 363-82575. Approx 64"x91"x92" (Machine) 34"x16"x40" (Hydraulic Unit) and 3000lbs
Main

Fork Lift for Hire has Quoted $150 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

361.(4) Assorted Ring Gages. (2) 4.0415", 4.0810", 4.0795".
Approximate Weight:34lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
362.Saylor-Beall Reciprocating Type Air Compressor. Approx 30 CFM Output, 120-Gallon Horizontal Receiver Tank, 7.5HP 208-230/460V 3-Phase Motor. Approx 72"x32"x53" Note: Hole in tank marked
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

363.Hartford Indexing Spacer. 8" Diameter 3-Jaw Chuck, Approx 6 3/8" Center Height, Vertical/Horizontal Mount, 2 1/2" Hole
2-3
364.(14) Assorted Ring Gages. Sizes up to 3.7505".
Approximate Weight:52lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
365.(3) Brushless Servo Motors. Model H-6300-Q-HO4AA, 6.8 hp, 3000 rpm, 1-3/8" Shaft Dia., 240 volt, 3-Phase.
7G
366.Reliance Electric Model PSM-50 Power Supply Module. 120/240 volt, 3-Phase.
7G
367.(12) Nu Power SLD60-203B-FC Power Supplies. 100-240VDC Input, 3.5VDC Output, Class 2
Approximate Weight:24lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
368.Pallet fo Assorted Items: Roof Brackets, Auto Repair Books, Bench Legs, Hilti Supplies, Tool Box, Drum Pump and More
7G
369.(2) Tesa Digital Height Gages (For Parts or Repair). (1) Model 007.30042, s/n: 2J 033 02 and (1) Model 8S 045 02, s/n: 007.90041.
Approximate Weight:76lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
370.Triple Axle Flatbed Trailer. 15,000lb Capacity, 20' Length Not Including Inclined Section, 100" Wide, 4' Inclined Length, Electric Brakes, Tongue Jack, Ball Coupler, VIN: DPSMN152364
Out
371.(2) Cadillac Pla-Chek Model 010074 12" Height Gages.
Approximate Weight:34lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
372.Tyrex Model D600AC Collated Screw Driver w/ Case.
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
373.Kurt Type Machine Vise Swivel Plate, 3/4" Center Stud.
Approximate Weight:20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
374.(2) Brushless Servo Motors. Both Model H-6200-Q-HOOAA, 3000 rpm, 3.4 kw, 240 volt, 3-Phase, 1-3/8" Shaft Dia.
7G
375.Ridgid Model 300 Pipe Threader. Cut/Ream/Thread Attachments, Assorted Chasers, 1/8" to 2" Pip Clamp, Mounted on No. 1206 Tristand, Foot Switch, 120V, s/n: 755399. Approx 67"x40"x55"
7G
376.Reliance Electric Model PSM-50 Power Supply Module. 120/240 volt, 3-Phase.
7G
377.Nutting Model 1 009-005 2-Wheel Hand Truck
7G
378.Hydraulic Jack with 12 1/2"x12 1/2" Lifting Platform. 3 5/8" to 16 1/2" Platform Height
7G
379.(24) Drawer Parts Organizer w/ Contents of Hundreds of Machine Screws, Overall: 34"x17"x10-1/2".
A51
380.LNS Model QL Servo S2 Magazine Type Barfeed. 1/4" to 4.7" Round Bar Diameter Range, 5.1" to 63" Length Range, 132lb Max Bar Weight, 39" Magazine Depth, Pendant Control, 3-Phase, s/n: 301245. Approx 96"x60"x60"
7G

Fork Lift for Hire has Quoted $100 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

381.(10) Renishaw Model A-4114-4150-02 4M Conduit Kits.
Approximate Weight:27lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
382.Pallet w/ Contents of Assorted Mainly Hardware Items Including: Gromets, Nuts, Bolts, Set Screws, Used Oxy-Acetelene Regulators and Torch, and More Shown.
A51
383.24 Drawer Parts Organizer w/ Contents of Hundreds of Mainly Metric Screws and other Hardware, Inspect Photos Closely, Cabinet Measures: 34"x11"x14".
A51
384.Promax Amprobe Model RG5410HP Liquid and Vapor Recovery Syatem.
Approximate Weight:31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
385.Pallet w/ Assortment of Mainly Electric Components Including: (12) 120V Drop Cords w/ Boxes, Outdoor Enclosure Boxes, Sunleaves 400W Ballast, Electric Heater, Wall Speakers, and More Shown.
A51
386.Reliance Electric Model BRU-500 Drive Module.
7G
387.(26) Indoor Sirens: (24) Ademco and (2) Honeywell
Approximate Weight:17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
388.Nova Systems NDC 1200 Stud Welder. 30 to 180V, (2) Guns, Cables, s/n: CB1016
A51
389.Assorted EDM Wire
7G
390.Wisconsin Oven Corp Model SWT-5128-E6.6 Batch Oven. 650F Max Temperature, 62"x142"x96" Inside, Digital Programming with Temp and Time Chart Recorder, 480 Volt 3-Phase, s/n: 059189906. Approx 90"x156"x156" and 10,000lbs

Location: Turtle Lake, WI

391.(5) Spools of New EDM Wire Including (3) Intech .010" Alphacut 500; (1) Versacut .030mm 10kg; (1) Hitachi HB--K0.010, 22.05lb
7G
392.Jet Coolant Tank with Pump. 1/8HP, 110V, 14"x10"x12"
7G
393.Custom Made Burner Stand and Tanks for Gun Barrell Blueing. 37 1/2"x7" Deep Tanks, 3 7/8"" to 5 1/4" Wide, (3) Burners, LP Fired
7G
394.(5) Mahr Dial Indicators, .0002"
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
395.5 1/8" Cadillac Type Riser Block
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
396.(24) Drawer Organizer w/ Contents of Hundreds of Mostly Metric Screws of All Types, Overall: 34"x17"x10-1/2".
A51
397.(15) Renishaw 4M Conduit Kits, (9) A-4114-4150-02, (5) A-4114-4150-01.
Approximate Weight:35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
398.(6) New Spray Guns, 3000 PSI Max.
Approximate Weight:7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
399.(2) Multi-Drawer Parts Organizers, (1) 18 Drawer w/ Contents of Assorted Hardware Including: Washers, Bolts, 1/4" Brass Compression Fittings, and More, (1) 24 Drawer w/ Contents of Dowel Pins, Bolts, Washers, Machine Screws, and More. Overall Each Unit Measuers 34"x17"x10-1/2".
A51
400.2004 Tarnel Gooseneck Trailer. 15,000lb Capacity, 20' Deck Length, Tandem Axle, Ramps, 83" Between Fenders, Wooden Deck, VIN: 5PYAT172841002767
Out
401.(2) 5-Drawer File Cabinets. 15"x28 1/2"x58 1/2" Note: Both Locked
A51
402.(3) Locker Guy 3-Locker Units. 45 1/4"x18"x72 1/4" Each
Out
403.Parts Tumbler. 15"x8" Hexagonal Chamber. Stand, 110V Motor. 17"x45"x50"
7G
404.(2) Cadillac Pla-Chek 12" height gages with 6" Risers.
Approximate Weight:73lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
405.Mitutoyo HDF-24" Heightmatic 600 Digital Height Gage, s/n: 9000286. (Needs Repair)
Approximate Weight:40lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
406.(3) Assorted Gages. (1) 6.619", .003" (1) 6.528", .005" and (1) 7.017", .003".
Approximate Weight:16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
407.(3) 13" x 6" x 9" Indicator Stands and (1) Custom Johnson Gage Company Fixture.
Approximate Weight:37lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
408.Assorted Electronics Including: Microcode II 2-Axis DRO and Curken Model 125-1 Graph.
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
409.Hach Model 18900 Ratio Turbidimeter with Accessories. s/n: 891105186. (Appears to be unused)
Approximate Weight:21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
410.Condor Model V1833X2 Scissor Lift. 500lb Platform Capacity, 18' Lift, 3' Platform Extension, 250lb Extension Capacity, 24"x60" Unextended Platform Area, 78 1/4" Lowered Height, 33" Wide, Operational On-Board Auto Stop/Start 110V Charger, New Trojan T125 Batteries in September 2018, s/n: V180011-99.

Video Available. Click on lot to view.
Ship

411.Assorted Stock Feeders Including (1) Rapid-Air Model F6 6" Capacity with 6" Stroke
A51
412.(6) New Komet Z75.J930420C0072 1.6641" Carbide Reamer Heads
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
413.(24) Drawer Organizer w/ Contents of Hundreds of Assorted Mainly ASE Nuts, Sizes as Shown, Overall: 34"x17"x10-1/2".
A51
414.Brother Model CE1125PRW Sewing Machine.
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
415.CM Lodestar 1/4 Ton Chain Hoist w/ Pendant Control, Basket and Trolley, 16 FPM Speed Rate, 208/220-480 V. 3PH.
2-3
416.(24) Drawer Organizer w/ Contents of Assorted Hardware Including: Screws, Washers, Nuts, and More Shown. Overall Cabinet Measures: 34"x17"x10".
A51
417.Pallet w/ Assorted Electrical Items Including: (2) 220V Vacuum pumps, 100' of 28Ga. Alpha-AB 20 Count in-line Wire, and Assorted PVC Small Dia. Tubing.
A51
418.Metal Cart with (24) Pull-Out Trays. 76"x30"x62"
Out
419.12" Indicator Satnd with 4-1/2" x 5-1/2" Table.
Approximate Weight:28lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
420.Huestis Tube Bender. 5C Collet Tube Hold System, Assorted Tooling and Collets, s/n: BMP1250-107-X9003. Approx 123"x55"x64" (Machine) 96"x22"x18" (Magazine Feed) 36 1/2"x16 1/2"x39" (Stand)
Ship

Fork Lift for Hire has Quoted $150 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

421.Cadillac Pla-Chek 18" Height Gage.
Approximate Weight:35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
422.Bag of Assorted ID Dial Bore Gage Anvils.
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
423.(5) Mahr Dial Indicators, .0002"
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
424.(5) Mahr Dial Indicators, .0002"
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R1
425.Welding Positioner. 18" Diameter Platen, Rolling Stand, 110V Motor, Approx 32 1/2"x19"x36 1/2"
7G
426.(5) Mahr Dial Indicators, .0002"
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
427.(5) Mahr Dial Indicators, .0002"
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
428.Assorted Bending Dies
A51
429.US Motors Variable Speed Assembly; Assorted Casters and Change Gears
A51
430.Bridgeport Model 1J Vertical Milling Machine. 9"x42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 13" Vertical Knee Adjustment, 5" Quill Travel, (8) Belted Speeds: 80 to 2,720 RPM, R8 Spindle Taper, Bijur One-Shot Lube, 1HP 220/440 Volt 3-Phase Motor and Controls, s/n: 60517. Approx 56"x60"x80" and 2,200 lbs.

Location: Granite Falls, MN

431.Fairbanks Morse Platform Scale with Digital Conversion. 2000lb Capacity, 25 1/4"x32 1/4" Platform, 1/2lb Increments, On Wheels, 110V/Battery, Approx 30 1/2"x60"x44
7G
432.Pair of 4"x36" Forks for 16" Carriage; Forklift Load Rest
A51
433.(14) 21 1/4"x20 5/8"x3" Divisible Plastic Trays with Dividers
7G
434.Assorted Concrete Finishing Tools Including 42" Aluminum Bull Float
3-2
435.Black & Decker 18" Electric Hedge Trimmer
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
436.PIG Absorbant Wringer. 12" Wide Rollers
7G
437.Gusher Coolant Tank & Pump. 208/230/460V 3-Phase, Approx 21"X12"x19"
7G
438.(3) IAI Corp Model IAI 1262-60-500 Linear Slide Actuators w/ (1) Parts Unit.
A51
439.Pallet of Assorted Mainly Electrical Components.
A51
440.Clausing Model 5904 - 12"x24" Lathe, Swing Over Bed and Saddle Wings: 12-1/4", Swing Over Cross Slide: 7-1/4", Hole Through Spindle: 1-3/8", Distance Between Centers: 24", Variable Speed 52-2000 RPM, Inch Threading, No Chuck, Cross Slide Needs New Gib, 2 HP, 3 Phase, s/n: 512358, Approx. 60"x28"x51", Approx. 1100 lbs.

Location: Granite Falls, MN

Seller States They will Load Machine at No Cost to Buyer with Condition Seller Assumes NO Liability. Buyer has Option to Arrange Their Own Rigger if Condition is Not Acceptable.

441.(24) Drawer Organizer w/ Contents of Assorted Hardware Including: Washers, Pins, Cable Clamps, Bushings, and More Shown. Overall Cabinet Measures: 34"x11"x10".
A51
442.Senco Model DS300-AC Collated Screw Driver w/ Case.
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
443.Pallet of Assorted Machine Parts and More. Including: Hydraulic Pump Tank, Hot Water Unit, Heater Blower Unit, and More Shown.
A51
444.18 Drawer Organizer w/ Contents of Hardware Including: Pins, Retaining Rings, Assorted Screws, Cotter Pins, Metric Screws, and More Shown. Overall Measures: 34"x17"x10-1/2".
A51
445.(2) 120 V Tools Including Bosch Model 1801 4-1/2" Angle Grinder, and Hilti Model UD10-01 Drill.
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
446.460V Poser Conditioner; Furnas Enclosure
7G
447.Pair of 3"x36" Forks. 1 1/2" Shaft Hole
7G
448.Assorted 3 1/2" Wide Abrasive Belts. Approx (94) Pieces
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
449.Wooden Book Shelf with (5) Fixed Shelves and (2) Doors. 32"x11 1/2"x78 1/2"
450.DoAll Model C-916A Horizontal Band Saw, 9"x16" Capacity, Auto Feed (Needs Repair), Variable Blade Speed: 60-360 fpm, 1"x.035"x159" Blade, 230 Volt, 3 Phase, s/n: 431-85102, Approx. 80"x87"(Less Front Table)x57".

Location: Granite Falls, MN

Seller States They will Load Machine at No Cost to Buyer with Condition Seller Assumes NO Liability. Buyer has Option to Arrange Their Own Rigger if Condition is Not Acceptable.

451.Assorted Framed Artwork
3-3
452.Assorted Items: Wen Table Saw; Shop Made Belt Sander; Control Cabinet; Guard Fingers
A51
453.Hurco Autobend 7 Press Control
A51
454.Assorted Punches & Dies
A51
455.Anver Sheet Lifter. 800lb Capacity, 8'x6' Max Load Size, 10" Diameter Cups
A51
456.Craftsman model 917.377783 Self-Propelled Walk-Behind Lawn Mower. 21" Cut, Single Lever Height Adjustment, 6.75HP Engine, s/n: 052504M 009374
7G
457.Huot Toolscoot Tool Holder Cart for Capto C6 Tool Holders. (2) Levels, (24) Tool Positions per Level, Approx 39"x18"x35 1/4"
Main
458.Assorted Sigma Six Tools Including: (1) ePro "Q" Nut Runner Digital Controller; (2) EITP105 1/2" Nut Drivers; (1) EITP65 3/8" Nut Driver; Assorted Cables
Approximate Weight:24lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
459.(2) Sandvik Coromat No. A5HD-38130-16-A Coolant Thru Ractangular Shank Tool Holder with Capto C6 Shank
Approximate Weight:15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
460.Iemca Mode CH112/37 Automatic Barfeed, 1mm-16mm Capacity, 230 Volt, 3 Phase, s/n: 98072715, Approx. 206"x16"x44".

Location: Granite Falls, MN

Seller States They will Load Machine at No Cost to Buyer with Condition Seller Assumes NO Liability. Buyer has Option to Arrange Their Own Rigger if Condition is Not Acceptable.

461.Sandvik No. C-6 PDLNR-45165-12HP Insert Cutter with Capto C6 Shank
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
462.Large Cap. Paper Cutter, 25" Cutting Cap, 24"x25" Board.
3-2
463.(3) New Cases of 200' of 3/8" Clear Olflex Tubing.
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
464.Beckhoff Model CP7031-0001 CNC Machine Control Panel, 12" Screen, Overall: Panel Measures: 16"x14-1/2".
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
465.John Boos NSF Stainless Steel Prep Table, Overall: 60"x30" w/ 5" High Back Splash.
Out
466.(2) Dewalt Saws Including(1) DW318 VS Orbital Jig Saw, and (1) 7-1/4" Framing Saw.
Approximate Weight:21lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
467.Enco Model 652 Platinum Edge DRO.
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
468.(18) Drawer Organizer w/ Contents of Hundreds of Assorted Groove Pins and Dowel Pins, from 3/32"x1/2" Up to 1/2"x2", Overall, Cabinet Measures: 34"x11"x10".
A51
469.(4) Sandvik End Mill Type Capto C6 Shank Tool Holders. (2) 1.250" Capacity, (1) 7/8" Capacity, and (1) 1" Capacity
Approximate Weight:15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
470.Tennsmith Box & Pan Brake. Unknown Model, 4' Max Bending Length, Approx 12-Ga Capacity in Mild Steel, Complete Set of Fingers, 2" to 4" Finger Width, s/n: na. Approx 88"x30"x57" and 1350lbs
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

471.(2) Sandvik Model C6-131-00098-25 Cylindrical Shank Adapters. Capto C6 Shank
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
472.(2) Sandvik End Mill Type Capto C6 Tool Holders: (1) No. C6-A39120-31-085, Approx 1.250"; (1) Approx 1"
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
473.(4) Sandvik End Mill Type Capto C6 Shank Tool Holders. (2) 3/4"; (1) 5/8" and (1) 1/2"
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
474.(4) Sandvik End Mill Type Capto C6 Shank Tool Holders. 3/8", 1/2", 5/8", and 3/4"
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
475.Hossfeld No. Universal Bender. 1/4"x4 1/2" Square Flat Bend Capacity, 5/8" Eye Bolt Capacity, 3/16"x3/4" Scroll Capacity, 2"x2"x3/16" Angle Iron Capacity, 1/4" to 2" Pipe Capacity, Assorted Dies, s/n: B12804. Approx 24"x54"x48" Without Extension Handle Inserted
Main

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

476.(4) Sandvik End Mill Type Capto C6 Shank Tool Holders. (2) 3/8", (1) 1/2" and (1) 1"
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
477.Assorted Pneumatic Components
A51
478.Rowe Model 3015S Coil Cradle. 3000lb Capacity, 48" Max Coil OD, Approx 18" Max Coil Width, 3-Phase, s/n: 17322. Approx 96"x38"x64"
Out

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

479.Anver Sheet Lifter. 600lb Capacity, 12'x6' Max Load Size, 10" Diameter Cups
A51
480.Gauer Metal Prod. Model 9H-10 Safety Edge Deburring Machine, Thickness Range: .036" to 3/16", Width Range: 1/2" to 10", Speed Approx. 125 fpm, 230/460 Volt, 3 Phase, s/n: 9R379742, Approx. 44"x40"x48".
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

481.(3) Sandvik ER32 Collet Type Capto C6 Shank Tool Holders: (1) No. C6-39114-32-060 and (2) No. C6-391.14-32-100
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
482.(3) Sandvik No. C6-391.14-25-100 ER25 Collet Type Capto C6 Shank Tool Holders. Missing Caps
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
483.(2) Sandvik ER25 Collet Type Capto C6 Shank Tool Holders
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
484.(2) Sandvik No. C-6-391.14-25-100 ER25 Collet Type Capto C6 Tool Holders. Missing Caps
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
485.(2) Sandvik No. C-6-391.14-25-100 ER25 Collet Type Capto C6 Tool Holders. Missing Caps
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
486.(2) Sandvik No. C6-391.1425-100 ER25 Collet Type Capto C6 Tool Holders. Missing Caps
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
487.Sandvik No. PDLNR-45165-15HP Insert Type Cutter with Capto C6 Shank
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
488.(2) Sandvik No. C6-570-2C-20-008 Coroturn SL Adapto Capto C6 Tool Holders with No. 570-SCLCR-20-09 Insert Type Replaceable Heads
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
489.Sandvik No. C-6-391-01-63, 100A Capto C6 Extension Adapter Tool Holder
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
490.DoAll Model C-916A Horizontal Band Saw, 9"x16" Capacity, Rotary Auto Feed, Variable Blade Speed: 105-275 fpm, 1"x.035"x159" Blade, Infeed Conveyor Approx. 24"x120"x27", 230 Volt, 3 Phase, s/n: 473-89247, Approx. 86"x55"x58"x57".

Location: Princeton, MN

491.(2) Sandvik No. C-6-DCLNR-17.100-12 Coolant Thru Insert Cutters
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
492.Sandvik No. C-6-391-01-63, 100A Capto C6 Extension Adapter Tool Holder with No. C6-TLSR-45065-3 Coolant Thru Insert Groove Cutter
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
493.Sandvik Capto C6 Shank Tool Holder Insert Cutter
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
494.Sandvik No. C6-391.01-63-100A Capto C6 Extension with Replaceaable Head Insert Cutter, Carbide Threading Insert
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
495.Sandvik No. C-6 PDLNR-45165-12HP Insert Cutter with Capto C6 Shank
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
496.Sandvik No. PDLNR-45165-15HP Insert Type Cutter with Capto C6 Shank
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
497.Sandvik No. C6-391.01-63-100A Extension Adaptor with Walter No. C6-DDJNR-45065-15 Replaceable Head Insert Cutter
Approximate Weight:7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
498.(3) Sandvik/Walter Capto C6 Shank Facemill Arbors.
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
499.Sandvik Capto C6 Shank Cut-Off Blade Tool Holder
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
500.2006 Hyster Model S155XL2 Fork Lift Truck. 10,800lb Rated Capacity, 181" Lift, Side Shift, Cushion Tires, High/Low Speed Transmission, Monotrol, LP Engine, 6"x60" Forks, 69" Free Lift, 111" Lowered Height, s/n: C024V02745D.

Please Note: Nomenclature plate lists lifting capacity with clamp attachment. Clamp attachment has been removed but plate was not updated. Estimated lift capacity of truck as equipped is 15,000lbs.

Video Available. Click on lot to view.

501.Clarke Model CLV-30G4 Litter Vacuum. Approx 26" Path, Extra Bag & Rubber Gasket, 5HP Briggs & Stratton I/C Gasoline Engine, s/n: IG6955. Approx 80"x32"x32"
A51
502.American Lifts Model S36-060 Lift Table. 4000lb Capacity, 42"x94" Table Area, Rotating Top, 18 5/8" Minimum Height, On Wheels, Pendant Control, 3-Phase, s/n: 40587451
Main
503.Super Brown Special Cold Saw. 12" Blade Capacity, 4" Quick Acting Vise with 7" Jaws, (2) Blade Speeds, Extra Blades, 220V 3-Phase, Approx 36"x45"x49"
7G
504.SMW Accu-Smart 60 Servo Control with Cables and Manuels
7G
505.Clay Poker Chip Set with Playing Cards and Locking Metal Case
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2L
506.43"x14 1/2"x60" Literature Rack
Out
507.38"x18"x88 1/4" Metal Shelf
Out
508.(4) Assorted Surge Tanks
Out
509.(2) Rolling Press Brake Die Racks. Approx 36"x23"x31" Each
Out
510.Approx (8) 27"x27"x16" Aluminum Baskets
Out
510.1.Lagun-Republic Model FTV-2 Vertical Milling Machine, 9" x 48" T-Slotted Table, 33" Longitudinal Table Travel, 16" Cross Table Travel, 16" Vertical Knee Adjustment, R8 Spindle Taper, Variable Spindle Speeds: 55 to 4,250 RPM, Power Feed Table, Acu-Rite Pro 2-Axis DRO(Needs Repair), 3 HP, 220/440 Volt, Three Phase, s/n: SE-15233, Approx. 62"x75"x81", Approx: 3,000 Lbs

Click on Lot for Video of This Machine.

Location: Princeton, MN

511.Assorted Die Cushions and More
Out
512.Post/Wall Mount Jib Crane. Estimated 500lb Capacity, 11' 3" Jib Length, 8' Post. Note: No Hinge Pins
Out

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

513.Assorted Barrier Panels Including (2) 120"x69"
Out

Fork Lift for Hire has Quoted $40 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

514.Arvin Automation Model TW3.A.O Spot Welder. 6" Throat, 110V, s/n: 5646. Note: No Control
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
515.(6) New Komet Z75.J930420C0072 1.6641" Carbide Reamer Heads
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
516.(2) Command Cat 40 Quick Change Tap Holders: (1) C4T4-0001 and (1) C4T4-0002
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
517.(17) Norton Masonary Cut-Off Wheels: (15) 7"x1/8"xDM-5/8" and (2) 4 1/2"x1/16"x7/8"
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
518.Assorted Tools Including (2) Armstron Type Lathe Straights; Bridgeport Quill Handle; V-Block Indicator Stand; (3) R8 Collets; (1) R8 Shank Sidel Milling Holder and More
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
519.Approx 29' of 4G 5C Power Cord. 1 1/4" Diameter
3-R1
520.30lb Bucket of 16d 3 1/4" Coater Sinder Nailes
Approximate Weight:31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
520.1.SMW Type MPC-A Manual Rotary Pallet Changer, Includes (2) 18"x30" T-Slotted Pallets and Pallet Receiving Station, s/n: 01028, Approx. 48"x55"x41", Note: Vise is NOT Included.

Location: Princeton, MN.

521.Mitsui Seiki Mfg. No. 1233501330811 Bar Draw Assembly
7G
522.New Ball Screw with Nut. Approx 70" Long and 1 1/4" Diameter. Box Marked "For Z-Axis Trak"
7G
523.New Koyo Ball Screw for Mitsui Seiki Y-Axis
7G
524.New Rexroth R151049591 Ball Screw
7G
525.New Rexroth R150347085 Ball Screw
7G
526.New Koyo Lb0034 Ball Screw. Hardinge Part No. 3610TFS5C1-980
7G
527.New Baines Ball Crew for W&S Wheel Side Slide
7G
528.(3) Assorted Ball Screws up to 56" Overall Length
7G
529.Rexroth R15104591 Ball Screw
7G
530.(2) Ball Screws: (1) Approx 39" and (1) Approx 17"
7G
530.1.Mitsubishi Model FGC15 LP Forklift, 3000 Lb. Cap, w/ Tilt and Sideshift, 3 Stage Mast Lifts Up to 189", Cussion Tires, 5878 Indicated Hours, 16" Carriage w/ 48"x4" Forks, Overall: 128"x38"x84", 6250 Lbs, S/N: AF81A-50917, LP Tank Not Included.

Location Princeton, MN.

Video Available. Click on lot to view.

531.New Koyo Ball Screw for Toyoda Y-Axis. Toyoda Item #: 64-27312460-001
7G
532.Rexroth R150347085 Ball Screw
7G
533.(4) Assorted Chart Recorders. Brands Include Honeywell and Yokogawa
7G
534.New, 24"x4"x12" Grinding Wheel
535.Multi-Compartment Organizer with Adjustable Shelves. 48"x15"x41"
7G
536.3-Sided Cart with Tongue
Out
537.Assorted Electrical Items: (1) Safetronics GP10 Vector AC Drive; (1) Honeywell DC3001-0-010-2-00-0111 Units; (1) Honeywell Controller
7G
538.(12) Rolls Printronix 220mmx625m Media
7G
539.(2) Omega 10-Position Selector Switches
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
540.(6) New Komet Z75.J930420C0072 1.6641" Carbide Reamer Heads
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
540.1.Mazak Model Quick Turn 10N Turning Center. 2.375" Bar Capacity, 10.236" Max Turning Diameter, 24" Machining Length, 17.3" Max Swing, Variable Spindle Speeds to 3,000 RPM, Chip Conveyor, 20HP Spindle Motor, s/n: 68023. NEEDS PARAMETERS Approx 120"x84"x84" and 9200lbs

Location: Albertville, MN

This item must be removed within (5) business days of the auction close or storage fees will be charged.

541.New 18"x5 1/2"x4 1/2" Heat Exchanger
Approximate Weight:15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
542.Assorted HSK 63 Cutters Including (4) 3-Step Reamers; (2) Solid 3-Step Reamers; (2) Solid 2-Step Reamers and (1) Komet Special Boring Head
7G
543.Numatics Flex Blok Valve Assembly with Gages. 20"x8"x8"
Approximate Weight:38lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
544.Associated Model 6065 Battery Charger. 15V 30A Output, Multiple Positive and Negative Connectors, 120V Input, s/n: 6065 0298. Approx 12"x11"x14 1/2"
7G
545.Bonfiglioli Gear Motor. 230/400V 3-Phase
Approximate Weight:32lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
546.(2) Ultrafilters and (1) Filter Rebuild Kit
Approximate Weight:22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
547.Misc Items Including Ear Plugs, Parts, Assemblies and More
7G
548.Assorted Items: Wheels, Connectors, Cables and More
3-3
549.20' of 6-Gauge 5-Conductor Cord. 1" Diameter
3-R2L
550.(2) 30lb Buckets of Grip Rite 16d 3 1/4" Coated Sinker Nails
2-3
550.1.Takisawa Model TX-20 Turning Center. 15.5" Swing, 7.08" Max Turning Diameter, 10" Max Turning Length, 1.25" Bar Capacity, Variable Spindle Speeds: 40 to 4500 RPM, 12-Station Turret, 8" 3-Jaw Chuck, Chip Conveyor, Fanuc 21T CNC Control, s/n: TKLV8404. Approx 84"x60"x72" and 6000lbs.

Location: Albertville, MN

This item must be removed within (5) business days of the auction close or storage fees will be charged.

551.(4) HSS Milling Cutters: (2) New K-Tool Co. 7"x1 1/4"x1 1/2; (1) National Twis Drill 8"x1 1/4"x1 1/2" and (1) 7"x3/4"x1 1/4"
Approximate Weight:31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
552.(6) New Komet Z75.J930420C0072 1.6641" Carbide Reamer Heads
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-R2R
553.Assorted Hold Down Hardware Including Bolts, Arms, Studs and More
Approximate Weight:33lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
554.Bison 6 1/4" 3-Jaw Chuck. Cam Lock Type, 1 1/2" Hole Thru
Approximate Weight:20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
555.White Horse Drill Chuck with MT2 Shank. 0-1/2" Capacity
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
556.Bison 6 1/4" 4-Jaw Chuck. Bolt-On Type, 1 5/8" Hole Thru
Approximate Weight:18lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
557.Buck 8 1/4" 3-Jaw Chuck. Cam Lock Type, 2 1/4" Hole Thru
Approximate Weight:52lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
558.Assorted Turning Tools: (1) 1"x1 1/8" Square Shank Insert Grooving Cutter; (1) Kennametal 1"x1 1/4" Shank Grooving Cutter; (3) Chuck Jaws and More
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
559.Approx (41) HSS Straight Shank Drill Bits. 3/8" to 1 3/8"
Approximate Weight:17lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
560.(6) Besly Extra Lengt Pipe Taps. 1/8-27 NPT to 3/4"-14. 6" Long
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
560.1.Emco Model Emcoturn 365MC Turning Center. Parts Machine, Turret & Chip Conveyor Complete, Main Spindle Motor Present, Coolant and Hydraulic Pumps Functional, Sub Spindle Motor Gone, Control Monitor and Other Components Gone. Approx 166"x72"x75"

Fork Lift for Hire has Quoted $300 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

561.Bench Type Drill Press. 8 1/2" Throat, 9"x9" T-Slotted Table, (12) Spindle Speeds: 340 to 2800 RPM, 5/8" Capacity Chuck, 3/4HP 110V Motor. Approx 16"x28"x43"
Main
562.Safe/Secondary Safe with Single Door, (2) Drawers and Digital Lock. 16"x16"x21" Inside Main Chamber, 19"x19"x34 1/2" External Dimensions. Includes Combination and Key
Main
563.Yard Machines Edger. (6) Depth Positions, 3.5HP Gasoline Engine
7G
564.Valley Craft Pick-and-Place Steel Drum Snatcher
A51
565.(2) Power House Tool Model HDH.736x18.5C-C Speed Heaters. Fits 3/4" Hole, 18 3/8" Rod, 480V
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
566.Approx (40) 3 1/2"x23"x8" Plastic Bins
Ship
567.Auctioneer's Podium with Seat, On Wheels, 24"x54 1/2"x69 1/2"
568.Approx (37) Assorted 3" Wide Grinding Belts. Approx 48" Long, 180-Grit and 240-Grit
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
569.Sonic Wall Model 1RK14-053 NSA 2400 Network Security Appliance. 100 to 240V Input, s/n: 0017C515C6C8. 17"x10 10 1/4"x1 3/4"
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
570.Set Upper & Lower Press Brake Dies. Approx 48" Long
571.Set of Upper and Lower Press Brake Dies. 24" Long Upper, 36" Long Lower
572.Assortment of Electric Motors and Drives From 3HP Up to 5HP, Also Includes Goulds Water Pump and Vickers Hydraulic Pump.
Out
573.Century AC Unit and Pallet of Flourecent Light Fixtures.
Out
574.Pallet w/ Assortment of Mostly New Motors and Hydraulic Pumps.
Out
575.New Justrite 4 Gallon Sure-Grip EX Acids and Corrosives Storage Cabinet, Overall: 17"x17"x27".
Main
576.Pallet w/ Approx. (30) Milwaukee Cases, Cases Primarily Marked Milwaukee Fuel 3/8" Impact.
Ship
577.(4) Electric Motors Including (2) Baldor 15 HP, Baldor Super E 20 HP, Lincoln 15 HP.
Out
578.(2) Mitsubishi Type SJ-11AW42M Spindle Motors, 1-1/4" Output Shaft.
Ship
579.Fanuc Model 40 Type A06B-0582-B041 10008R AC Servo Motor, 40 Torque, 23 Amps, 135 Volts, 3PH., 1-1/4" Output Shaft.
580.Baldor Cat. No. M37141 10 HP Motor, 208-230/460 V. 3PH. 1725 RPM, `1-3/8" Shaft.
Out
581.Shop Made Lifting Boom. 88" Long
Out
582.Onan Model 5.5HGJAD-2138A Generator. 5.5KW 120V 45.8A Output, 5.5KVA Capacity, Gasoline Engine, s/n: a020328060. Approx 33"x22"x18"
Main
583.HPS 3-Phase Transformer. 45KVA, 480 HV, 208Y/120 LV, Approx 24"x25"x29" and 365lbs
Main

Fork Lift for Hire has Quoted $40 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

584.Blackhawk Portable Hydraulic Equipment Kit. 20-Ton Capacity, Pump, Accessories, Woden Crate
Main
585.Arrow Shop Crane. 1/2" to 2-Ton Capacity Depending on Boom Length, Removable Legs
7G
586.Carolina Model CRJ20 Low Profile Transmission Jack. 1200lb Capacity, Attachments, 6 1/2" to 31" Height
Main
587.Approx. (42) Collapsible Wire Containers, Most are 48"x40"x30".
Out

Fork Lift for Hire has Quoted $125 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

588.(10) Heavy Duty All Steel Carts, 3"x6" Steel Swivel Casters, (7) 36"x48"x11", (3) 36"x36"x11".
Out
589.Hyster Model W 40 XL Electric Walk Behind Pallet Jack, 4,000 lb. Capacity, 7-1/2"x48" Forks, 12" Gap Between Forks, 3733 Indicated Hours, 12 Volt, s/n: D 135K1527.E, Approx. 72"x33"x62", Approx.. 1700 lbs.
Out
590.Se-Cur-All (6) Tank LP Storage Cabinet, Approx. 43"x32"x32".
Out
591.(4) Rolling Safety Staircases, (1) Each of 61", 51", 39" and 29" to Top Step.
Out
592.Plastic Vertical Holding Tank, Approx. 46" Dia. X 84".
Out
593.(6) Collapsible Plastic Containers, Approx. 45"x48"x24".
Out
594.Withdrawn by Seller

Presto Model XZT50-40 Pallet Lift Table. 4000lb Capacity, 33" Max Height, 50"x48" Max Pallet Size, Pendant Control, 115/230V Motor, s/n: 145861. Approx 754"x53"x62"

Location: Albertville, MN

This item must be removed within (5) business days of the auction close or storage fees will be charged.

595.Thermo Scientific Model 3977 Mechanical Convection Incubator. 30"x24"x72' Inside, Adjustable Wire Shelving, 120V, s/n: 108534-164. Approx 36"x30"x93 1/2"
Ship
596.Single Spindle Production Drill Press. 7" Thraot, 12"x12" Drilled & Tapped Shuttle Table, Hy-Pneu-Mat Pneumatic Feed Spindle, 1/3HP 90V DC Motor, Rolling Stand with 1/2" Thick Steel Top, Approx 31"x47"x70"
Ship
597.MTMA Model LP20 Pallet Wrapper. 48"x48" Platform, 20" Film Capacity, 110V, s/n: 1080531. Approx 48"x92"x89"
Ship

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

598.96 1/4"x48" Cast Iron Surface Plate. 32 1/2" Surface Height
Main

Fork Lift for Hire has Quoted $125 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

599.Bison 7 1/2" 2-Piece Vise
Approximate Weight:60lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
600.Universal Dividing Head. 5 1/4" Center Height @ Horizontal, (3) Dividing Plates, Change Gears, Tailstock & Instructions
2-1
601.Ridgid No. 25 1/" to 4" Pipe Vise.
Approximate Weight:26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
602.70 lb Anvil, 7" Horn Length, 18" x 7" x 9-3/4" Overall.
Approximate Weight:72lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
603.Craftsman Model 921.153101 1.5 hp Air Compressor, 125 Max PSI, 3-Gallon Tank, s/n: 179530
Approximate Weight:41lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
604.Horton Sales Company Box Stapler.
605.Assorted Wheels, Sizes as Shown.
606.Gorbel 500lb. Jib Crane, 11'6" Arm, Approx. 10' Clearance Under Arm.
Out

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

607.Generac Model G1000 Gas Powered Generator, 12 volt DC, 120 Volt AC, 75 Watts, 3600 rpm, 1-phase, s/n: 076255, Approx. 16"x 11" x 16".
Approximate Weight:50lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
608.(12) Fire Extinguishers
609.Eastwood Model 90/50 Abrasive Blaster with Gun. 9-1/2" Dia x 11" Tank.
Approximate Weight:15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
610.Assorted Lifting Chains, Bottle Jacks, Lifting Straps and More.
611.Assorted Hoses, Tarps, Tool Racks, Jumper Cables and More.
612.Assorted Torch Nozzles, Regulators and Hose.
Approximate Weight:36lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
613.18 5/8"x6" T-Slotted XY Table. 11" Longitudinal Travel, 3 1/4" Cross Table Travel, 1/2" T-Slots
Approximate Weight:53lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
614.10"x7" Adjustable Angle Table with (3) 1/2" T-Slots
Approximate Weight:42lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
615.Central Machinery Item #45707 3/4" Universal Cutter Grinder. 3/4" max Stock Diaemter, 1" Max Grinding Diameter, 4' Cup Wheel, 3600 RPM, Assorted Collets and Accessories in Kennedy T ool Box
2-1
616.(6) Collapsible Plastic Containers, Approx. 45"x48"x24".
Out
617.Palmbren 4" Milling Attachment for Lathes
Approximate Weight:33lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
618.Assorted Morse Taper Adapters nad (1) #4 MT Chuck Arbor. Adapters Include (1) Each 3-4, 4-5, and 5-6
Approximate Weight:11lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
619.56" x 46" x 1-1/4" Metal Plate.
Ship
620.Assorted Carts, Stools, Shop Light, Roller Stand.
Ship
621.Baldor Cat No. 8123M Double End Grinder on Stand, 3/4 hp, 208-230/460 volt, 3-Phase, 24" x 18" x 48".
A51
622.Pallet with Assorted Small Parts Bins, Uline H541 Mtela Truck Seals, and Tweco 300 Amp Electrode Holders.
A51
623.Advance Lifts Model AL-436 Hydraulic Lift Table, 4000 lb Capacity, 48" x 48" x 18" Platform, Foot Pedal, 3-phase, s/n: 11394593D.
A51
624.Pair of 48" x 4" Forks, 16" Carriage.
Out
625.Pallet of Assorted Abrasives Including: Belts, 4-1/2" Angle Grinder Buffing Pads, Wire Wheels, and More Shown.
Ship
626.Pallet w/ Large Assortment of Hardware Including Bolts, Rivets, Nylon Straps, Nuts, Springs, and More Shown.
Ship
627.(2) Global Industrial Computer Carts, 25" x 23" x 64".
A51
628.(2) Global Industrial Media Carts, 25" x 19" x 42" Each.
A51
629.Mitutoyo No. 103-907A 1" to 6" Micrometer Set with Wood Case, Carbide Tipped Anvils, .0001"
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
630.(2) Skids of 37" x 44" Black Corrugated plastic Sheet, 38" x 45" x 49" Each Skid.
Out
631.Rolling Stock Rack 39" x 32" x 84" with (6) Powered Conveyors (As Is), Conveyor Lengths up to 96" L x 10" w.
Out
632.Steeltrak Model 23 2-1/2, 721 Powered Conveyor, 12" Track Width, 89" Run, 54" Drop off Height, 1/2 hp, 208-220/440 volt, 3-Phase, s/n: 96-41187-4.
Out

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

633.Metal Bench with 5" Vise, 76" x 24" x 96".
Out

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

634.(3) Custom Roller Feed Tables, 9" Roller Width, 25" Height.
Out
635.Approx. (22) Steel Stock Holders, Approx. 34" x 24" Each.
Out
636.Metal Bench with 5" Vise, 76" x 24" x 96".
Out
637.(5) 9-Compartment Locker Units, 45" x 15" x 78" Each.
Out
638.Steeltrak Model T3-721-24 Powered Conveyor. 24" Belt Width, 10' run, 48" Drop Off Height, 1/2 hp, 115/230 volt, 1-Phase, s/n: 12-100322 (2012)

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

639.Sioux Double End Bench Griner with Pedestal. 10"x1" Wheel Capacity, 1Hp 220/440V 3-Phase Motor, s/n: 51143. Approx 27"x17"x52"
640.Metal Bench with 5" Vise, 76" x 24" x 96".
Out
641.Lincoln Chassis Lubricant Grease Pump. Includes: Barrel, Roller Base, and Grease. 18"x18"x45".
A51
642.Welding Curtain and metal Frame. 78"x71".
A51
643.AEGIS Glass Handler in Case.
644.Pheonix Dry Rod Model 1. Type 10B, Temp Range 300 Degrees F. Avg., 110W, 110V.
Approximate Weight:14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
645.Assortment of Screwdrivers, Nut Drivers, Flat and Round Files, and Hacksaws.
Approximate Weight:30lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
646.(3) Braces Drills with Large Selection of Bits and Chisles.
Approximate Weight:40lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
647.Large Assortment of Tools, Including Wrenches, Pliers, Sockets, Double End Grinder without Motor, and More
Approximate Weight:7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
648.(35) Assorted Wrenches Up To 2-1/4" and Other Misc. Hand Tools.
2-3
649.Box O' Bolts. Approx. 1/2" x 1" Length of Threads. Box: 8"x8"x5".
Approximate Weight:28lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
650.Mikron Model 120.01 Gear Hobber. Parts Machine, 40mm Max Hobbed Diameter, 40mm Max Hobbing Length for Spur Gears, 6 to 250 Teeth, 250 to 1830 Hob RPM, Manuals. Approx 29"x22"x55"
A51

Fork Lift for Hire has Quoted $40 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

651.Assorted Parts for Mikron A62 Hob Sharpener Including (2) Spindle Motors, (1) Hydraulic Motor and More
A51
652.Hardinge Single Tube Bar Feeder. 1 1/16"x12' Capacity, s/n: BF-1596
A51
653.Crate of Allen Bradley Circuit Boards as Used on Hardinge CHNC
Main
653.1.Allen Bradley 7370 Control for Hardinge Lathe. Parts Unit.
654.Mikron Model 102.05 Gear Hobber. Parts Machine, 4 3/4" Max Diameter of Spur and Spiral Gears, 5 1/8" Max Hobbed Length, 6 to 400 Teeth, 12DP Max Pitch, Manuals. Approx 46"x27"x62"
A51

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

655.(11) Assorted Fellows Shank Type Gear Shaper Cutters
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
656.(10) Assorted Fellows Shank Type Gear Shaper Cutters
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
657.(7) Assorted 1/2" Straight Shank Key Cutters. (4) HSS, (3) Carbide, Sizes: .126" to .190"
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
658.(10) Assorted Fellows Shank Type Gear Shaper Cutters
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
659.(12) Assorted Mostly Fellows Shank and Disc Type Gear Shaper Cutters
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
660.Mikron Model 79 Gear Hobber. 46mm Max Cut Diameter with 18mm Diameter Cutter, 46mm Max Path of Cutter Slide, 38mm Max Length of Cut with Collet Chuck, 32mm Max Length of Cut with Mandrel, 34mm Max Betweem 24mm Cutter and Axis of Operating Spindle, 70mm Max Between Spindle and Tailstock, 6 to 390 Teeth, .07 to .87mm Feeds per Rotation of Workpiece, 5mm Max Displacement of Cutter Spindle, Variable Speed Spindle Drive, 1/2HP Motor, Manuals s/n: 4159. Approx 30"x24"x51" and 460lbs

Video Available. Click on lot to view.
A51

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

661.Walker Mfg 10-Ton Capacity Floor Jack. 6" to 22" Range, s/n: 93658
7G
662.J&L Model MBS-71200M horizontal Hans Saw. 7"x12" Rectangular Capacity, 7" Round Capacity, (4) Blade Speeds: 85 to 235 FPM, 1/2" Blade Width, Coolant, On Wheels, 1HP 110/220V Motor, s/n: 079663. Approx 50"x20"x42"
Main
663.Scissor Lift Table. Estimated 1000lb Capacity, 44"x48" Diamond Plate Top, 23" to 50 7/8" Height, On Wheels, 110V
Ship
664.Makita Model 2414NB Chop Saw. 14" Blade Capacity, Vise, 3800RPM, Mounted on Rolling Bench, 46"x27"x52"
Ship
665.Central Machinery Belt Sander. 4"x36" Belt, Vertical/Horizontal Orientation, 110V. 10"x18"x11"
Approximate Weight:22lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
666.VersaGage CF Digital Caliper. 18" Measuring Range, .0005" Resolution, Padded Wooden case
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
667.(2) Dock Lights and (1) Halogen Work Light
Main
668.(2) Wall Mount Enclosed Dry Erase Boards
A51
669.(10) Assorted Fellows Shank Type Gear Shaper Cutters
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
670.Hydraulic Lift/Turn Table, 48"x42" Steel Top, Max. Lift Approx. 40".
Ship
671.(11) Assorted Mostly Fellows Gear Shaper Cutters. (5) Shank Type, (1) Arbor Button Type; (4) Button Cutters
Approximate Weight:15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
672.(10) Assorted Fellows Shank Type Gear Shaper Cutters
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
673.(8) Assorted Fellows/Isoform Button Type Gear Shaper Cutters
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
674.Assorted Mikron Tooling and Parts
Approximate Weight:14lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
675.Approx (25) Mikron Gears. Possibly 1980's Type
Approximate Weight:19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
676.(16) Assorted Barber Colman/Illinois Tool Works and Similar Gear Hob Cutters. 120DP 20-Degree Up to 6-2DP 20-Degree
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
677.Approx (85) Assorted Illinois & Type Small diameter Taper Hobs and More
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
678.(9) Assorted Mostly Fellows & Isoform HSS Button Type Gear Shaper Cutters with 1 1/4" Diameter Arbor
Approximate Weight:7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
679.(11) Assorted Mostly Fellows Gear Shaper Cutters. (7) Button Type, (2) Shank Cutters with 1 1/4" Button Arbor
Approximate Weight:7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
680.Timesavers Model 137-1HDMW Wide Belt Grinder. Wet Type, 37" Wide Grinding Belt, 35 3/8" Wide Feed Belt, Variable Feed Speed, Air Knife, Paper Filtration, Assorted Belts, 3-Phase Motor and Controls, s/n: 23670. Approx 80"x90"x88" (Machine) 51"x86"x25" (Tank) 44"x33"x52" (Blower)
Ship

Fork Lift for Hire has Quoted $200 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

681.(1) Kent-Moore Universal Breakout Box, J39700.
(1) ServiceGard Breakout Box Adapter harness Kit, JT07327. 15"x15"x7" ea.
Approximate Weight:19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
682.Large Amount of Specific Use Automotive tools, Wrenches, Sockets, and More. See Pictures for more Details.
Ship
683.Metal Cabinet With Two Shelves. Has Lock and Key. 14"x13"x30".
Approximate Weight:20lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
684.(4) Citizen Dot Matrix Printers, Model iDP-3111. (2) Seiko Thermal Printers, (2) Electrical Boxes, (2) Machine Switch Boxes, (4) OTC 3305-100 Basic Update Kits.
685.(2) Metal Storage Units. Including (1) Shelving Unit with Two Shelves, 34"x15"x29".
(1) 2 Drawer Cabinet, 17"x12"x12".
Ship
686.(2) OTC Diagnostic Systems- Monitor 4000 Enhanced.
Approximate Weight:26lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
687.(3) Chrysler CE5500 EATX Programmer Kits.
(2) OTC Mind Reader Scan Tools.
2-3
688.(3) J-42598- Vehicle Data Recorders. (2) OTC System 2000 Engine Monitors. (1) OTC 4-Gas Monitor, Digital gas Analyzer.
Ship
689.(2) OTC 3050B Deluxe Noid-Light Kit For fuel Injector Testing. (1) Vacuum Gauge, (1) Pressure Gauge, (1) ISC/IAC Motor Tester.
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
690.(2) Telesis "Pinstamp" Pin Marking Systems. Model TMP1700 Marking Heads with Pins, (1) Handle, Model TMC470 Controllers, s/n: 19147 & 16667
691.(2) OTC Manuals, (1) Box Import terminals for Computers and Sensors. (3) Event retrieval Cartridge Kits, And More.
692.Milwaukee Heavy Duty Wet/Dry Vacuum
693.Assorted Rakes, Shovels and More
694.Heavy Duty Pole Stand with Assorted Cords, Hoses and More. 20" Diameter Base, 75" Tall
695.Nordson Powder Coat Equipment, Includes (2) Model Encore Powder Spray System, (2) Encore Gun Controllers, (4) Model NHR-2-50 Hoppers and (2) PN: 1102650 Powder Guns.
Main
696.Heavy Duty Pole Stand with Assorted Hoses. 20" Diameter Base, 75" Tall
697.36"x44" Man Lift Basket on Wheels
Out
698.(3) Hydraulic Powered Winches and (2) 2" Receiver Hitches
699.Stihl Model 056AV Chainsaw Powerhead. No Bar
Approximate Weight:19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
700.(2) Telesis "Pinstamp" Pin Marking Systems. Model TMP1700 Marking Heads with Pins, (1) Handle, (1) Set of Feet, Model TMC470 Controllers, s/n: 19500 & 18605
701.Parts Cabinet, Overall: 24"x24"x66".
702.Assorted Items Including Small Parts Cabinet Measuring 20"x18"x14", Spool of 1/4" ID Pneumatic Hose, 30" Tall Stand, and (2) 18" Tall Rolling Stools.
703.Siemens Catalog No. 3F3Y075TP1 Dry Type Energy Efficient Transformer, 75 KVA, High Voltage: 480, Low Voltage: 208/120, Approx. 27"x21"x32".
Ship

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

704.(4) 2 Post Die Shoes, (2) 10" Betweeen Mounting Holes, (1) 7" Between Mounting Holes, and (1) 12" Netween Mounting Holes.
1-1
705.Dake Number 1B Arbor Press, 7" Throat, 7-1/2" Ram, No Handle.
2-1
706.Hammond Power Model NMK075KB Dry Type Step Down Transformer, 480V. 3Ph High Voltage, 208Y/120V Low Loltage, Overall: 26"x22"x38". 565 Lbs.
Ship

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

707.Kurt D60-1 6" Precision Machine Vise w/ Handle.
2-1
708.System 3R Mini-Block 20MM Tool Holder. 2-3/4"x2-3/4"x2-3/4".
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
709.Geprufte Sicherheit Model SU232.1.0037 Deckel SO Collet Drill Grinder, 4" Dia. Cup Size, Includes (6) Collets From 1/8" Up to 5/8", 120 V.
2-1
710.Fujie Manual Surface Grinder. 10"x4" Capacity, 7" Wheel Capacity, 10"x4" Permanent Magnetic Chuck, One-Shot Lube, 3-Phase Motor and Controls, s/n: 1619. Approx 40"x32"x53"
7G

Fork Lift for Hire has Quoted $40 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

711.Cincinnati Dividing Head w/ Accessories, Approx. 5-1/2" To Center.
1-1
712.Ammco Model 4000 SafeTurn Brake Lathe w/ Disc Brake Facing Mechanism, SN: 15228, 120V. Mounted to Wood Bench, Includes Different Facing Accessories.
Ship

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

713.(2) New London Engineering Model 200-18"-5' 18" Powered Conveyor Belts, 5' Lengths, 115V. 27" Tall.
Out
714.Assortment of Fasteners, Includes (4) Boxes of 1/4"-20x2" Flange Screw Plain Finish and Pre-Packaged Kits with Bolt & Nuts.
Ship
715.Moog Hydraulic Valave for Strippit Turret Punch. New.
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
716.6" Belt Grinder. Vertical/Horizontal Orientation, 14 3/4"x7 1/4" Slotted Tilting Table, 110V, Approx 19"x19"x56"
7G
717.(2) Powered Conveyor Units, (1) Steeltrak T2 721-24, 24" Width, 16' Run, 20" Dropoff Height, s/n: 12-100321 and (1) Make/Model Unknown, 12' Run, 12" Wide.
Out

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

718.FG Fred Folding Gate Security Fence Enclosures, Model PFG-2085, (2) Separate Fences Spans 18' -20' Gap, 8' Tall Closed.
Out
719.Approx. (70) 20MM Sinker EDM Electrode Holders and Large Assortment of Misc. Graphite Pieces.
2-1
720.(8) R8 Collets From 3/16" Up to 5/8".
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
721.Atlas Model 7664 Wheel Balancer, 230V. 3Ph 6000RPM.
722.Campbell-Hausfeld Reciprocating Air Compressor.
Ship
723.Kent-Moore Model J3811-C Refrigerant Recovery & Recycling System, Overall: 19"x24"x46".
A51
724.Jancy/Arboga No. 17525 6" Adjustable Tilt/Height Belt Sander, 4.8 HP, 220V. 3Ph. Overall: 28"x36"x42".
Ship
725.(6) Assorted Pneumatic Sanders
Approximate Weight:16lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
726.Assortment of Items Including Jack, Heater, Trouble Light, Wire, and More.
727.Approx (24) 36" PIG Absorbant Socks
Approximate Weight:32lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
728.(2) Atlas Welding Model 1200 Dual Speed Pipemate, 1" to 17" Diameter Pipe and Tube Capacity, 1200lb Max. Load, 115 Volt, s/n's: 3542 & 3539.
Main
729.Accupro Stock No. 06534051 Rockwell Hardness Tester with Accessories, s/n: 1778, Approx. 6"x18"x25", Packaged in 33"x41"x33" Wood Crate.
A51
730.Sullair Model RN-150-115-1-60-A, PN: 02250193-818, Refrigerated Compressed Air Dryer, 134a Refrigerant, Max. Air Pressure: 230 PSiG, Max. Inlet Temperature: 150 Degrees, 115 Volt, s/n: 0513SA00201.
A51
731.New London Engineering Model 200-18"-50" Power Conveyor, 18" Wide x 58" Long Belt Area, .75 HP, 115/230 Volt, s/n: 11-96871 Mfg: 3/10/11, Approx. 60"x28"x29"(On 6" Risers).
A51
732.Hundreds of New Swivel Casters with Brake, 3"x3/4", Also Includes Mounting Insert for Approx. 1-1/2" ID Tubing.
A51
733.Baldor No. 33198113 Dual Shaft Motor, 2 HP, 1800 RPM, 5/8" Diameter Shafts, 230/460 Volt, 3 Phase, New In Box.
Approximate Weight:44lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-2
734.Industrial Magnetics Lifting Magnet. Permanent Type, Unknown Capacity, 11"x6 1/2" Magnet Area, Cam Release
Approximate Weight:50lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
735.Assorted Indexing Punches for Strippit Turret Punch
Main
736.Dozens of 1 1/4" Dies for Strippit Thick Turret Turret Punches
Main
737.Assorted Tooling For Thin Turret Strippit Turret Punch: Full Body Style Punches; 5/8" Drop-In Punch Heads
Main
738.(3) Nihon Parkerizing Co. Type GX304 Powder Guns Controls with Hoses and more.
Main
739.Assortment of Banding Tools and More Shown.
Approximate Weight:32lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
740.Assorted Turret Punch Tooling: 1 1/4" Fab Style Easy Set Heads; Springs, Urethane For Form Tools
Approximate Weight:31lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
741.Banding Cart With Custom Welded Tray Added. 25" Dia. Reel.
Ship
742.Banding Cart . 25" Dia. Reel.
Ship
743.Banding Cart . 25" Dia. Reel. Includes Tools
Ship
744.Banding Cart . 25" Dia. Reel. Includes Plastic Banding and Tools.
Ship
745.Uline Banding Cart . 25" Dia. Reel.
Ship
746.Banding Cart With Custom Welded Tray Added. Includes Banding Tools. 25" Dia. Reel.
Ship
747.(9) Assorted Extra Length HSS Roughing End ills up to 1 1/2" and (1) Extra Length Side Milling/Key Cutter, 1 1/4"x3/16"x3 1/4
Approximate Weight:23lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
748.Approx (70) Assorted Carbide Inserts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
749.Approx (49) Assorted Side Milling Cutters. Mostly 3"x5/16" with 1" Arbor Hole
750.Approx (140) Mostly Tool Flo Carbide Inserts
Approximate Weight:4lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
751.Appros (145) Assorted Kennametal Carbide Inserts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
752.Approx (165) Assorted Iscar Carbide Inserts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
753.Approx (135) Assorted Carbide Inserts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
754.(5) Assorted Large HSS Clev-Forged & Nartional Type Drill Bits and (1) Core Drill up to 2" Diameter. Core Drill had #5MT, #4MT on Others
Approximate Weight:27lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
755.Autoquip Hydraulic Lift Table, Model NA, 4000 lb Max Load, 72"x36"x1/2" Steel Top.
A51
756.(2) Telesis "Pinstamp" Pin Marking Systems. Model TMP 1700 Marking Heads with Feet and Handles, (1) Pin, (1) Controller, s/n: 18691 & na; and (1) TMP 4100 Pin Stamp Marker without Controller
757.2-Branch Lifting Cable. Approx 10' Long, 3/4" Diameter Cable
Main
758.(29) Assorted British Standard Pipe Thread Taps, 55 Deg. Mod Whit, 1/8-28 to 3/8-19.
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
759.Approx. (150) Drill Inserts From 7/16" Up to 2-3/8".
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
760.Assortment of Cutting Tools Including Approx. 6-3/4" Face Mill Marked VR/Wesson Co. FCR6-3006, and (4) Insert Type Endmills, and (1) 1" Dia. Boring Bar.
Approximate Weight:19lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
761.(10) Assorted Fellows & Type Button Type Gear Shaper Cutters with 1 1/4" Diameter Arbors
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
762.(10) Assorted Fellows Button Style Gear Shaper Cutters with 1 1/4" Arbor
Approximate Weight:9lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
763.(10) Assorted Fellows Button Style Gear Shaper Cutters with 1 1/4" Arbor
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
764.(10) Assorted Fellows, Dathan, Parker and More Disc Type Gear Shaper Cutters with 3/4" and 1 1/4" Arbors
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
765.(10) Assorted Gear Tools, Iso-Form and Morel Disc Type Gear Shaper Cutters with 1 14/" Diameter Arbors
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
766.(9) Assorted Mostly Fellows Disc Type Gear Shaper Cutters with 1 1/4" Diameter Arbors and (1) Long Shank Gear Cutter
Approximate Weight:13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
767.(10) Assorted Mostly Fellows Disc Style Gear Shaper Cutters with 1 1/4" Arbor, (1) with 3/4" Arbor
Approximate Weight:15lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
768.Brown & Sharpe Digit-Hite IV Model No. 599-1012-4 32" Tall Height Gage, s/n: 10548
Approximate Weight:24lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
3-3
769.(2) Diamond Grinding Wheels: (1) Darex, 6 1/2" Diameter, .650" Arbor; (1) New Norton, 7" Diameter, 2" Arbor
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
770.Tietzmann Tool Corp 4-Piece Set of 6"x2 1/2"x1/4" Ball Bearing Parallels in Wooden Case
Approximate Weight:5lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
771.Approx (50) HSS Reamers. .110" to .6693"
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
772.(16) Assorted Side Milling Cutters. 1 3/4" to 5 1/4" Diameter
Approximate Weight:10lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
773.(32) HSS Endmills From 3/4" Dia. Up to 1-1/4", Some Double End.
Approximate Weight:27lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
774.Porta-Lift Hydraulic Lift Table, Model NA, 48"x96".
A51

Fork Lift for Hire has Quoted $125 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

775.(2) Telesis "Pinstamp Pin Marking Systems. Model TMP1700 Marking Heads with Pins, (1) Handle, (1) Set of Feet, Model TMC470 Controllers, s/n: 15752 & na
776.Assorted Reamers, Drill Bits and More.
Approximate Weight:35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
777.Approx. (150) Cutting Tool Inserts Including (75) RTW Style RNMG-43E Grade 918, and More Shown.
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
778.Approx. (60) Assorted High Speed End Mills, 9/64" to 1".
Approximate Weight:12lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
779.Large Assortment of Insert Type Drill Inserts From 21/32" Up to 1-7/8".
Approximate Weight:7lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
780.Large Assortment of Mostly Used DoAll Band Saw Blades Including 1/2x18Tx64-1/2, and More Shown.
781.55 Gallon Drum Dolly.
Main
782.Banding Cart.
Ship
783.(2) Plastic Coating Melting Pots w/ Plastic.
Approximate Weight:13lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
784.(5) Rubbermaid Waste Canister Dollies, 23-1/2" Holding Dia. Cap.
Main
785.Cutter Master Model HDT-30 Endmill Tool Grinder, 1/16" to 3.0" Diameter Capacity, Air Bearing Spindle, (2) Extra CBN Cup Wheels, 115 Volt, s/n: I4764007, Approx. 28"x28"x20", Approx. 120 lbs.
Main
786.(47) Large Dia. Taps From 1/8-12 NF Up to 1-3/8-12 NF.
Approximate Weight:35lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
787.(2) Flatbed Carts: (1) 48"x54" and (1) 42"x60"
Out
788.(1) Tapmatic No. 700U Tap Head (Needs Repair), (1) Jarvis Model 303 Tap Head with #2 MT Shank, 5/16" to 5/8" Capacity and (1) Heinrich Speed Clamp.
Approximate Weight:28lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-2
789.Approx (140) Assorted Valenite and Korloy Carbide Inserts
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
790.Hobart Motor Generator. 8,835 Hours on Meter, 600A 28.5V Output, 6-Cylinder Gasoline Engine, s/n: DWT-528. Approx 42"x111"x54" Seller Notes: Last ran four years ago. Stored indoors.
Out

Fork Lift for Hire has Quoted $125 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

791.Telescoping Microscope Stand, 27" Tall.
Approximate Weight:53lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-3
792.Approx (120) Assorted Carbide Thread Type Inserts
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
793.Approx (130) Assorted Carbide Thread Type Inserts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
794.Approx (144) RTW Thread Type Carbide Inserts
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
795.Approx (200) Assorted Carbide Inserts
Approximate Weight:3lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
796.Approx (160) Assorted Carbide Inserts
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
797.Approx (175) Assorted Carbide Inserts
Approximate Weight:6lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
798.Approx (160) Assorted Carbide Inserts
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
799.Approx (280) Assorted Carbide Inserts
Approximate Weight:8lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
800.Approx (165) Assorted Carbide Thread Cutting Inserts
Approximate Weight:2lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
801.EGA Products Rolling Safety Stair. 300lb Capacity, 89 3/4" Top Tread Height, 23 1/2" Tread Width, 121 1/2" Overall Height
Out
802.Arrow Model 1002399 Fork Spreader. 8300lb Capacity, 7"x60" Fixed Forks, 4"x60" Adjustable Forks, 15 1/4" Fork Movement, 86" Overall Width of Attachment, 38" Center Distance Between Fixed Fork Pockets, s/n: FS-24495.
Out

Fork Lift for Hire has Quoted $50 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

803.MMK Matsumoto 4th Axis CNC Rotary Indexer, 9" T-Slotted Faceplate, 2-1/2" Through hole, 16-Pin & 14-Pin Cables, Serial Number N/A. includes (2) tailstocks, approx 14" x 24" x 12", 250 lbs
Ship
804.Bell & Gosset Hydro-Flo Model 2AB Centrifugal Pump. 110GPM, 30Ft 1.5HP
Ship
805.Tsudakoma 4th Axis/Indexer. 12 1/2" T-Slotted Face Plate, 9 1/4" Center Height, 1 9/16" Hole Diameter, Inclinable, Approx 37"x12"x21"
Ship
806.Withdrawn by seller.

Presto Model XZT50-40 Pallet Lift Table. 4000lb Capacity, 33" Max Height, 50"x48" Max Pallet Size, Pendant Control, 115/230V Motor, s/n: 107242. Approx 754"x53"x62"

Location: Albertville, MN

This item must be removed within (5) business days of the auction close or storage fees will be charged.

807.Standard Tool Co. Cherry Picker w/ 3 Ton Lifting Ram Jack, Feach From 48" Up to Approx. 120", Overall Retracted Dimensions Measure: 70"x38"x66".

Location: Princeton MN

808.Novatec Model NPH-HOPPER Media Hopper. 400lb Capacity, Cone Bottom, On Wheels, s/n: 3A2324-1072. Approx 29"x29"x101"
Main

Fork Lift for Hire has Quoted $75 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

809.RB Mfg Co Flat Bed Cart with (3) 28" High Panel Rails and Extra Rail. 24"x48"x38"
810.Conair Franklin Model 1805-390500 Dryer/Hopper. Approx 1200lb Capacity, s/n: D41505. Approx 36"x36"x120"
Out

Fork Lift for Hire has Quoted $100 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

811.(8) Pieces of 20'x3/4" Steel: (3) 1/8" Thick and (5) 1/4" Thick.
Out
812.Reliance Electric Motor, Model # P18G3897B, 1755 RPM, 1.5HP, 460 V, 60HZ, Phase 3, 2 Amps, Continuous Duty. 15"x13"x14"
Ship
813.Sheldon Mfg Model 1350FM Oven. 18"x18"x16" Inside, 110V, s/n: 04098207. Approx 27"x25"x32"
Ship

Fork Lift for Hire has Quoted $40 to Load This Item. To minimize your wait, please contact Dan prior to your arrival if you plan to use his services at 612-803-4350

814.(6) 36"x13"x66 1/2" Metal Shelf Units with Large Assortment of Pull-Out Bins. (6) Pallets
Out
815.New, Concentric Hydraulic Power Unit with 1HP 208-230/460V 3-Phase Motor. 22 1/2"x10"x8"
Approximate Weight:42lbs. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
816.RB Mfg Co Flat Bed Cart with (3) 28" High Panel Rails and Extra Rail. 24"x48"x38"
817.Budget Molders Model PSB-24 Powered Conveyor. 24" Wide, 18" Run, 2 3/4" Flexible Spides, Adjustable Height Frame, 110V, s/n: PSB2401620801
818.RB Mfg Co Flat Bed Cart with (3) 28" High Panel Rails and Extra Rail. 24"x48"x38"
819.(3) New Linear Rail Slides. Approx 25' Long
Out
820.Set of 1924 Minnesota License Plates
Approximate Weight:1lb. The weights are approximate before packaging. Please note that when calculating shipment some items may be subject to dimensional shipping charges.
2-1
821.Cincinnati Milacron Model DD-202 Media Dryer. Approx 600lb Capacity, On Wheel, 460V 3-Phase, s/n: 3933A02-99037. 62"x36"x100"
Main
999.Sink
7G