Hoff Online Auctions
RVS - Former Assets of Superior Mfg - Tuesday, July 10, 2018 Tuesday, July 17, 2018 - Starting at 10:00am CDT

Item Description
1.Bridgeport Series I-2HP Vertical Milling Machine, 9"x42" Table, 22" Longitudinal Travel, 12" Cross Travel, Variable Spindle Speeds: 4200 RPM, R-8 Spindle Taper, One Shot Lubrication, Bridgeport Variable Speed Power Table Feed(Needs Repair), 2 HP, 220 Volt, 3 Phase, s/n: 206982 (New 1990's), Approx. 57"x60"x82", Approx. 2000 lbs.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

2.Mitutoyo 24" to 30" Micrometer Set with Standards, .001" Graduation.
3.DuMore Catalog No. 12-010 Tool Post Grinder, 8" x1" Wheel, 1 HP, 115 Volt, s/n: 8205, Needs New Switch-Always On.
3.1.Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.
3.2.Please click on this lot for Preview Times at the RVS Online Auction.
3.3.Please click on this lot for Rigging Information at the RVS Online Auction.
3.4.UPS Shipping Available for small items Click here for more information.
3.5.This auction features EXTENDED BIDDING! View this lot to learn more.
3.6.This auction STARTS TO CLOSE at 10:00 AM Central Time at a rate of 4 lots per minute. Click this lot to learn more.
3.7.How much time is left?
3.8.Click on This Lot For Important Removal Information at the RVS Online Auction.
4.Chicago Electric Item 69029 Arc Welder, 225 Amp, Max OCV 48 Volt, Duty Cycle 20% @ 225 Amp, Capacity 1/16" to 1/4" in Mild Steel, Input 240 Volt, 60 Hz, 47 Amp, s/n: 1813-37147-6149, Approx. 9"x17"x14".
5.Solid Carbide Seco Model SNR000625 60-16 Boring Bar, 1" Dia. Shank, 7-1/2" Shank Length.
6.Dumont Minuteman No. 40A Steel Broach Set in Wood Case.
7.CM Valustar 1/2 Ton Electric Chain Hoist with Pendant Control, 3-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
8.Famco Model 3-1/2R Arbor Press on Metal Stand, 1-3/4" x 1-3/4" Ram, 16" Max Under Ram, 3-1/2" x 4-1/2" Knockout, 9" Throat, 15" x 30" x 68" Overall.
9.Troyke Model U-15 15" Rotary Table.
10.Quincy Model QR-325 5 hp Reciprocating Type Air Compressor with Approx. 50 Gallon Vetical Receiver Tank, 460 volt, 3-Phase, s/n: QUO811190005, Approx. 32" x 28" x 77" Overall. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
11.Yuasa No. 585-005 5" 3-Jaw Lathe Chuck, Bolt-On Type, Approx. 1-1/4" Hole Thru, Extra Set of Jaws.
12.Large Assortment of New Fagersta Tool Bits, Mainly 1" and 3/4" Shank, Mainly 6" Length, Sizes as Shown In Photos.
13.6" Wide x 48" Belt Sander, 3/4 HP, 115 Volt, (5) New Belts, Approx. 14"x21"x55".
14.Huot 5-Drawer Number Drill Cabinet with Drill Bits.
15.Mitutoyo No. 511 Bore Mic Set, .7" to 1.4" Range, .0001" Graduation.
16.Dewalt Model DW756 6" Bench Grinder on Stand. 3450 rpm, 1-Phase, s/n: 201620YL28229.
17.H-Frame Hydraulic Shop Press. Tonnage Unknown, 2-1/4" Ram Diameter, 38-1/2" Between Uprights, 10" Bed Width, 3-Phase, 62" x 30" x 90" Overall. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
18.Kurt D-60 6" Precision Machine Vise w/ Swivel Plate, Includes Handle.
19.Meyer Model M-3 Gage Plug Set, .501-.625 Minus.
20.Powermatic Model 1200 Drill Press. 10" Throat, 18" x 16" Table, #3 MT Spindle, 100-2000 rpm, 1 hp, 230/460 volt, 3-Phase, s/n: 7920V041, Approx. 24" x 36" x 77".
21.Albrecht 1/32"-1/2" Keyless Drill Chuck.
22.(8) Assorted R8 Collets up to 3/4".
23.(20) Assorted 5C Collets. Sizes from 17/64" to 1-1/16".
24.(15) Insert Type Cutting Tools, Mostly 1" Square Shank, Average Shank Length 4-3/4".
25.Kurt Type 6" Swivel Base.
26.Kurt Type 6" Machine Vise with Swivel Base.
27.15" x 10" Adjustable Angle Plate.
28.Assorted Extra Length HSS Drills. Sizes up to 19-1/2" L.
29.Jacobs No. 20N Drill Chuck on #4 MT Shank, 3/8" to 1" Capacity.
30.Miller model Synchrowave 350LX CC AC/DC Synchrowave Power Source. Class I Output: 32 volt, 300 amps @ 60" Duty Cycle, 80 Max OCV. Class II Output: 34 volts, 350 amps @ 40% Duty Cycle, 80 Max OCV, 3-400 Weld Range AC/DC, Foot Switch, Gun, Chiller, Ground Clamp, Cart Mounted, 200/230/460 volt, 1-Phase, 17.4 kw, s/n: KK220417, Approx. 24" x 36" x 44" Overall. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
31.Assorted Inserts, Insert Type Endmill and Arbors.
32.(36) TG 100 Collets. Sizes up to 1".
33.(8) Assorted R8 Collets up to 3/4".
34.Assorted HSS Endmills up to 1" Diameter, Many are NEW.
35.Group of Assorted Carbide Burr Bits.
36.Large Assortment of HSS Cutters.
37.CM Valustar 1-Ton Eelctric Chain Hoist with Pendant Control, 1-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
38.(8) Assorted 5C Collets. (3) Hex, 5/8", 1/2", 11/16" and (5) square, 15/32", 1/2", 1/4", 3/8", 3/4".
39.VR Wesson EM-100-32 Indexable Endmill with Assorted Inserts. 3/4" Shank Diameter.
40.LeBlond Factory Raised Engine Lathe, Raised 4-1/2", 36"x72" Capacity, 36" Swing Over Ways, 28" Swing Over Cross Slide, 12 Speeds: 18 to 720 RPM, 2" Hole Thru Spindle, 4-Way Tool Post, Inch Threading, 18" 3-Jaw Chuck, 24" Face Plate, 12" Dog Drive Plate, Hardways, Coolant, 10 HP, 3 Phase, s/n: 5H752, Approx. 141"x51"x67"

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

41.Group of Assorted Carbide Endmills, Drills.
42.Assorted HSS Endmills up to 1-3/4" Diameter.
43.Assorted Carbide Endmills, Sizes up to 6" Length x 1/2" Diameter.
44.Criterion Model DBL-202 Adjustable Boring Head on 3/4" Diameter Shank.
45.Assorted Carbide Endmills, Sizes up to 4-1/2" Length x 11/16".
46.W.R. Brown 3" Pneumatic Vise with 6" Jaws.
47.(2) R8 Shank Tools. (1) Jacobs no. 34 Drill Chuck, 0-1/2" and (1) Adjustable Boring Head.
48.(19) Assorted 5C Collets (Many NEW) Sizes up to 47/64".
49.(12) Assorted HSS Taps, Sizes up to 2-1/2".
50.Ikeda Model RM1000 Radial Arm Drill, 4'10" Capacity, 12 Spindle Speeds: 30 to 1500 RPM, 4 Power Feeds: .003 to .040, #5 MT in Spindle, Power Elevation, Electric Clamping, Coolant, 5-HP Motor # Controls, s/n: 78202 (1978), Approx. 36"x72"x80", Approx. 5600 lbs., Note: Box Table Not Included, See Lot 61.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

51.Assorted HSS Drill Bits and Reamers, Mostly #2MT Shanks, Sizes up to 1-1/32".
52.Chandler-Duplex Model D71 Adjustable Boring Head on R8 Shank.
53.LW Chuck 6-1/2" Swivel Base.
54.Jacobs no. 14N Drill Chuck on #4 MT Shank, 0-1/2".
55.(27) HSS Drill Bits, Mostly 13/16" and Mostly #2MT Shanks.
56.Group of HSS Reamers, Sizes up to 13/16".
57.21" - 4-Jaw Chuck, Thread Mount.
58.Approx. (30) HSS Drill Bits, May Extra Length, Sizes up to 2" Diameter.
59.(19) Roughing Endmills, Some NEW, Sizes up to 1" Diameter.
60.Brown Master 12" Cut-Off Saw with Pneumatic Assisted Clamping. Stock Roller and Adjustable Stop, 220 volt, 3-Phase, 55" x 41" x 72". R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
61.Plain Box Table, 20-18/2"x16"x16-1/2".

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

62.Assorted HSS Endmills, Sizes up to 7/16".
63.Approx. (27) HSS Endmills (New), Sizes as Shown.
64.(17) Assorted 5C Collets. Sizes from 1/16" to 53/64".
65.Assorted HSS Taps, Sizes up to 3/8"-16.
66.(4) Sets of Lathe Jaws. (1) 5" Aluminum Pie Jaw Set, (2) 65-05-SP and (1) 65-05-HF.
67.CM Lodestar 1/4 ton Electric Chain Hoist, Pendant Control, 3-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
68.(20) Insert Type Cutting Tools, Mostly 1" Square Shank, Includes (1) New Kennametal 1.7802SR 100Z and More Shown.
69.(5) R8 Shank Tool Holders Including: (1) With 2-3/4" Shell Mill, (4) Endmill Holders.
70.Powermatic Model 1200 Drill Press. 10" Throat, 18" x 16" Table, #3 MT Spindle, 100-2000 rpm, 1 hp, 230/460 volt, 3-Phase, s/n: 220V32, Approx. 24" x 36" x 77".
71.Starrett No. 254 - 14" Master Vernier Height Gage, Hardened & Stabilized Master Bar, In Wood Case.
72.Trimos 12" Height Master.
73.Meyer Model M-2 Gage Plug Set, .251-.500 Minus. Set Not Complete.
74.Scherr-Tumico 6"-9" Tubular Micrometer, .001" Graduation, Includes Standards and Wood Case.
75.(16) Insert Type Cutting Tools, Mostly 1" Square Shank, Shank Length Mostly 5".
76.(9) Assorted 5C Collets, Sizes up to 63/64".
77.Hardinge Model 30A-HCX 5" 3-Jaw Chuck with Extra Jaws.
78.(4) Assorted 5C Collet Chucks.
79.(2) Jacobs Drill Chucks on #3 MT Shanks, (1) No. 34-06, 0-1/2" and (1) No. 6A, 0-1/2"
80.Milltronics Model VM24 Vertical Machining Center, 3-Axis Machine, 40" X-Travel, 24" Y-Travel, 24" Z-Travel, 8000 RPM, 20 Tool ATC, BT40 Spindle Taper, 4th Axis Ready, Full Enclosure, Coolant, Centurion VI CNC Control, 15 HP Motor & Controls, s/n: 4216 (New ), Indexer Not Included - See Lot 99 for Indexer. Approx. 116"x100"x120", Note: Buyer is Responsibe for Proper Blocking of Machine for Shipping.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

81.Assorted HSS Taps, Sizes up to 5/8".
82.(36) TG 100 Collets. Sizes up to 1".
83.Approx. (50) HSS Endmills, Sizes up to 1-1/2" Diameter.
84.Approx. (21) HSS Taps, Sizes up to 1-1/4"-12.
85.Assorted HSS Drill Bits, Sizes up to 2" Dia.
86.(6) Assorted 5C Collet Chucks.
87.C.C. Craley MFG. Adjustable Boring Head on R8 Shank, 3/4" Tool Holes.
88.Swivel Base for 6" machine Vise.
89.Wahlstrom Model 28-94 Keyless Drill Chuck on #2MT Shank with R8 Adapter, 1/32" to 1/2" Capacity.
90.Goodway Model GW-2660 Gap Engine Lathe, 26/35" Rated Capacity, 26" Swing Over Way, 18" Swing Over Cross Slide, 16" Gap Length, 12 Speeds: 15 to 1000 RPM, 4-1/4" Hole Thru Spindle, Inch/Metric Threader, 4-Way Tool Post, 12" 3-Jaw Chuck, Steady Rest, Change Gears, 15 HP 3 Phase, s/n: 72024, Approx.. 116"x40"x56".

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

91.Royal Products p/n: 10664 Live Center on #4MT Shank and (1) #4MT Shank Dead Center.
92.Pressure Micrometer, 0-1" Range, .0001" Graduation, Carbide Tipped Spindle and Anvil, Mfg NA.
93.Mitutoyo 24" Inside/Outside Vernier.
94.Scherr-Tumico No. 16 0054 - 18" Height Gage in Wood Case.
95.Scherr-Tumico 12"-16" Tubular Micrometer, .001" Graduation, Includes Standards and Wood Case.
96.Kitigawa Model HOB-5 5" 3-Jaw Lathe Chuck with Assorted Jaws.
97.CM Lodestar 1/2 Ton Electric Chain Hoist with Pendant Control, 1-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
98.(2) Jacobs Drill Chucks on #3 MT Shanks, (1) No. 14N, 0-1/2" and (1) No. 34-02, 0-1/2".
99.Haas Indexer with Servo Control, 7" T-Slotted Face Plate, Approx. 1-1/8" Thru Hole, Right Angle Plate and Fixture Plate Shown in Photo. s/n: 1850. Indexer Approx. 19"x5-1/2"x9".
100.Linde Model E25B Electric Fork Lift, 4600 lb. Capacity, 156" Vertical Lift Max., Up/Down/Tilt/Side Shift, 4"x48" Forks, 16" Carriage, 2531 Indicated Hours, Cushion Tires, Lights, Safety Cage, Also Includes Exide Depth Charger Model D3E-24-950, 48 Volt, 24 Cell, s/n: 2658-0526. Approx. 120"x44"x84", Approx. 7610 lbs.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

101.2 Door Cabinet w/ Contents Including(5) Multi Drawer Small Parts Containers, and More Shown, Overall 2 Door Measures 36"x18"x78".
102.(10) Assorted Dial Indicators For Repair or Parts.
103.Big Joe Model 1076S Electric Walk Behind Forklift, 2000 Lb. Cap, 42"x3" Forks, 24" Wide Carriage, 120V. Tender, Lifts Up to 70", Overall: 64"x26"x86". R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
104.Large Assortment of Mostly 3/8" Hold Down Hardware Including Bolts, T-Nuts, Washers, Step Blocks, and More.
105.Rolling Workstation w/ Contents of Assorted Drills, and Hold Down Hardware, Cart Measures 24"x30"x51".
106.Unit Hoist Model H1-2 Engine Lift, 2000 Lb. Max Cap. Reach From 6" Up to Approx. 91", Overall Footprint, 64"x48".
107.(2) Heavy Duty Large Jack Stands, 21" at Resting Height Up to 29".
108.(10) Drawer Rolling Tool Cabinet, Ball Bearing Slides, Overall: 19"x28"x53", Each Drawer Contains 2 Removable Pull Out Trays as Shown.
109.(14) HSS #5MT Drills, Flute Length From 3-1/2" Up to 10", Dia. From 1-19/32" Up to 2".
110.Model 64169741 1/2 hp Tool and Cutter Grinder, 6" Wheel Capacity, 12" x 6-3/4" Tables, 3400 rpm, 115 volt, 1-Phase, Approx. 24"x 14" x 46".
111.(11) HSS #5 MT Drills, Flute Length From 3-1/2" Up to 13", Dia. From Approx. 1-5/8" Up to 3".
112.(12) HSS #5 MT Drills, Flute Length From 6-1/2" Up to 12", Dia. From 2" Up to 2-3/4".
113.2 Door Cabinet w/ Contents of Mostly Hold Down Hardware and Components, Cabinet Measures 36"x18"x78".
114.(2) Mitutoyo Pitch Mics, Both are Partial Sets, (1) 2"-3" and (1) 3"-4", .001" Graduation, Ratchet Stop.
115.Etalon 20" Inside/Outside Vernier.
116.(3) Scherr & Tumico Inside Micrometer Sets, All Partial.
117.NSK 6" to 12" Micrometer Set, .001" Micrometer Set, Includes Standards and Wood Case.
118.(3) Micrometers, (1) Fowler 1"-2", Carbide Tipped Spindle and Anvil, .0001" Graduation, Ratchet Stop, (1) Fowler 3"-4" Carbide Tipped Spindle and Anvil, .0001" Graduation, (1) Etalon 2"-3" Carbide Tipped Spindle and Anvil, .001" Graduation.
119.Starrett No. 486P-5 Blade Type Micrometer, 3-1/2" to 4-1/2" Range, .001" Graduation.
120.Miller Model Deltaweld 452 CV DC Welding Power Source with 70 Series Dual Gun 24 V Wire Feeder. 38 volts, 450 amps @ 100% Duty Cycle, 44 max OCV, (2) Guns, Ground Clamp, Cart Mounted, 200/230/460 volt, 3-Phase, 21.1 kw, s/n: MD290075C, Approx. 27" x 64" x 49" Overall. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
121.Jacobs No 14N Super Chuck #4MT Shank In a #5 MT Sleeve.
122.Kurt 6" Anglock Precision Machine Vise with Handle.
123.Morgan 4" Benchtop Vise with Swivel base.
124.Pallet w/ Contents Including Truck Load Clamps, Couplings, Paint Sprayer, Light Bulbs, Fan, Abrasive Material, Files, Helicoil Thread Repair Kits, and More Shown.
125.Large Assortment of Grinding Wheels and Abrasize Stock Sanding Supplies Including Cup Wheels, Discs, Belts, Rolls, and Stones.
126.Huot 3-Drawer Letter Drill Cabinet with Drill Bits.
127.Jet 1/2 Ton Electric Chain Hoist, 3-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
128.(2) Tapping Heads. (1) Procunier Model E, Size 1, #3 MT Shank. And (1) SPI No. 76-005-8, #4 Capacity, #2MT Shank.
129.Pallet w/ Contents of Hand Tools and More Including Roller Chain, Level, Pipe Bender, Saws, Wire Cutters, and Assortment of Electrical Testing Equipment.
130.Geminis Model 1000 Gap Engine Lathe, 28/38" x 120" Rated Capacity, 28" Swing Over Way, 18" Swing Over Ways, 12" Gap Length, 18 Spindle Speeds: 16 to 1000 RPM. 3-1/4" Hole Thru Spindle, Inch/Metric/Whitworth Threading, Hardways, 20" 4-Jaw Chuck, Steady Rest, Follower, Change Gears, 15 HP, 220/440 Volt, 3 Phase, s/n: 4344, Approx. 192"x65",76"(Top of Steady Rest), Approx. 9800 lbs.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

131.20 Ton Bottle Jack.
132.(6) YMZ BT40 Collet Type Tool Holders, Type BT40-0TG150-135.
133.Assortment of Extended Reach Drill and Tap Holders.
134.Machine Products Co. Angle Plate, 6"x8"x1" Face and 6"x6"x1" Face.
135.(3) Partial Transfer Punch Sets from 3/32" Up to 17/32".
136.(29) New Fagersta Super High Speed Tool Bits From 1/2"x5/16"x4" Up to 1-3/4"x3/4"x5", Sizes as Shown In Pictures.
137.(2) Partial Scherr-Tumico Tubular Micrometer Sets, (1) 9-12" and (1) 6"-9", .001" Graduation, Ratchet Stop, Wood Case.
138.Rahn Granite Inspection Plate, 48"x36"x8" on Metal Stand.
139.Mitutoyo No. 104-152 Micrometer Set, 12" to 16" Range, .001" Graduation, Ratchet Stop, Standards and Wood Case.
140.Landis Type C Plain Cylindrical Grinder, 10"x72" Rated Capacity, 19" Max. Swing Over Table, Hydraulic Table Feeds, 3"x30" Wheel Size, Micrometer Infeed, Motorized Work Head, Tail Stock, 15 hp Grinder Head Motor, s/n: 24524, Approx. 176"x84"x84".

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

141.(2) Scherr & Tumico Inside Micrometer Sets, Both Partial. Also Includes Assorted Extensions.
142.(2) Huot Metal Drill Index Cases, Fractional & Letter, Filled with HSS Blanks.
143.Assorted Inspection Tooling, Includes 20" Height Stand, Brown & Sharpe .0005" Graduation. Indicator and More.
144.Approx. (35) Assorted Thread Plug Gages, Includes (9) Metric from M4x.7 to M14x1.5, (21) Standard from 4-40 to 1/2-20 and Assorted NPT.
146.2-Door Metal Cabinet, Approx. 36"x25"x35".
147.Wood Shop Bench w/ Metal Top, Overall: 48"x27"x46".
148.Kitigawa Model HJA6-10 10" 3-Jaw Lathe Chuck, Approx. 1-1/4" Hole Thru, Bolt-On Type.
149.Rohm 10" Dia. 3Jaw Chuck, Cam Lock Type, 3" Hole Through.
150.Ikeda Model RM-1300 4' x 13" Radial Arm Drill, 12-Spindle Speeds: 30 to 1440 RPM, 4 Power Feeds: 0.004" to 0.021" IPM, No. 5 Morse Taper Spindle, Power Elevation, Electric Clamping, Coolant System, 5 HP, Three Phase Motor and Controls, s/n 69255 (1969), Approx. 80"x36"x96", Approx: 8,000 Lbs. Note: Box Table Not Included, See Lot 161.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

151.Assorted HSS Blanks and (2) Huot Drill Index Cases.
152.(5) Pneumatic Tools Including (1) 3/8" Impact Wrench, (1) 1/2" Impact Wrench, and (3) Die Grinders.
153.(3) Jacobs Drill Chucks. (1) DC4661, 1/16" to 3/8", (1) MC1G41, 0-3/4" and (1) U4G61, 3/8"-24.
154.Kurt D60 6" Precision Machine Vise w/ Handle.
155.CM Lodestar 1/4 ton Electric Chain Hoist, Pendant Control, 3-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
156.(2) Partial Sets of Scherr-Tumico Tubular Micrometers, .001" Graduation, (1) 9"-12" & (1) 12"-16".
157.(2) Micrometers, (1) JT Slocomb 5"-6" Range, .001" Graduation, (1) Starrett 6"-7" Range, .001" Graduation, Ratchet Stop.
158.Mitutoyo 18" Inside/Outside Vernier.
159.Mitutoyo No. 537-511 - 24" Inside/Outside Vernier, .001" Graduation.
160.Shibaura Model TX-13 Vertical Boring Mill, 49" 4-Jaw Chuck, 53" Maximum Swing Inside Guards, Single Swiveling Turret Head, 41" Maximum Under Rail, 42" Horizontal Travel of Turret Head, 29" Vertical Travel of Turret Head, 12 Table Speeds: 4.5 to 200 RPM, All Power Feeds, Accurite 2-Axis DRO, 30-HP Motor and Controls, s/n: 8 (New 1978), Approx. 128"x112"x118", Approx. 18,000 lbs.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

161.Plain Box Table, 26"x18"x16.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

162.Wood Storage/Work Bench, Was Used in Inspection, Lower Section Approx. 96"x26"x36", Upper Section is 24" High, Contents Not Included but Does Included 2-Drawer Metal Cabinet.
163.Assortment of Cutting Tools Including Boring Bars, Insert Type Mini Shell Mills, Hole Saws, Centerholes, Drills, Endmills, and More.
164.2 Door Cabinet w/ Inside Dividers For Stock/Drills/etc. Overall: 36"x18"x72".
165.Approx. (60) Assorted Taps, Sizes From 1/4-20 NC Up to 3/4-10NC.
166.2 Door Cabinet, Overall: 36"x21"x78".
167.2 Door Cabinet, Overall: 36"x21"x78".
168.Approx. (50) HSS Endmills, Some Double End, Dia. From 1/4" Up to 1/2".
169.(35) New Fagersta Super High Speed Tool Bits From 3/8" Square Shank x 6" Length Up to 1"x2-1/2"x7-1/2", Sizes as Shown In Pictures.
170.Fortune V Turn 26 CNC Turning Center, 2-Axis Machine, 20.5" Swing Over Bed, 14.96" Maximum Turning Diameter, 10.24" Standard Turning Diameter,13.78" Swing Over Carriage, Fanuc 18T Control, Variable Spindle Speeds to 3500 RPM, Tailstock, 10 Position Turret,Approx. 3-1/4" Hole Thru Spindle, 12" 3-Jaw Chuck, Chip Conveyor, s/n: UA-172. Approx. 182"x63"x77", Approx 9300 lbs.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

171.Pro Cut 3"-8 NPT HSS Tap.
172.Large Assortment of Cutting Tool Parts, and Replacement Components for Cutting Tools.
173.Group of Assorted Threaded Rod. Sizes up to 3/4"-16.
174.(2) Adjustable Height Shelving Units, Each Measures: 48"x24"x39".
175.(2) Sub Plates, (1) 22" Diameter x 4-1/2" Jaw Plate, (1) 24-3/4" Diameter Plate.
176.Approx. (150) Cutting Tool Inserts Including Seco, Carbaloy, Kennametal, and More Shown.
177.(9) Large Dia. Taps From 1-8NC Up to 1-3/4-12 NS-G.
178.(2) Vises, (1) 6" Palmgren Type Speed Vise, (1) 3-1/2" Machinist Vise.
179.Large Assortment of Taps and Tap Extensions, Sizes From M4x.7 Up to M16x2.0.
180.Kingston Model HR2000 Heavy Duty 34 Gap Engine Lathe, 25"x80" Capacity, 25" Swing Over Bed, 16 Speeds: 12 to 1200 RPM, 4" Hole Thru Spindle, Inch/Metric Threader, 37-1/2" Swing in Gap, 16" Swing Over Cross Slide, Cam Lock Spindle, 20" 3-Jaw Chuck, Hardways, Acurite 2-Axis DRO, Steady Rest, Foot Treadle, 15 HP, 3 Phase, s/n: 2M0306136 New: 2015.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

181.(12) Solid Carbide Tool Bits, Dia. From 1/4" Up to 5/16".
182.Multi Compartment Shelving Unit w/ Contents of Broaches, Bushings, R8 Shank Tooling w/ Large Assortment of Roughers and More Shown, Cabinet Measures 34-1/2"x17"x38".
183.Approx. (200) Cutting Tool Inserts, Mainly Spe-D-Cut and Carmet Brands.
184.Assortment of Drills and More Shown.
185.CM Lodestar 1/4 ton Electric Chain Hoist, Pendant Control, 3-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
186.Mitutoyo No. 104-153 Micrometer Set, 16" to 20" Range, .001" Graduation, Includes Standards and Wood Case.
187.(2) Mitutoyo Pitch Mics, Both are Partial Sets, (1) 2"-3" and (1) 3"-4", .001" Graduation, Ratchet Stop.
188.Fowler Pressure Micrometer, 1"-2" Range, .0001" Graduation, Carbide Tipped Spindle and Anvil.
189.Starrett No. 199 Master Precision Level, 1 Division = .0005 in/ft, In Wood Case.
190.Wellsaw Model W-20 Vertical Band Saw, 20" Throat Depth, 16" Maximum Under Blade Guides, 26"x26" Tilting Table, 3/4" Blade Width, 1-1/2 HP, 115 Volt, s/n: 1207, Approx. 29"x48"x83", Approx. 700 lbs.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

191.Make/Model Unknown 6" Double End Pedestal Grinder, 1-Phase, 21" x 14" x 50".
192.Approx. (200) Cutting Tool Inserts, Including Sandvik, Seco, Kennametal, Sumitoma, and More.
193.Assortment of Tooling for Fortune Lathe Including Tool Holders and More Shown.
194.12" Dog Drive Plate and Assorted Drive Dogs.
195.(2) Jacobs No. 14N Drill Chucks, 0-1/2" Capacity.
196.Assortment of MT Adapters and Tool Holders.
197.(14) HSS #4 MT Drills, Flute Length From 3-1/2" Up to 12", Dia. From 1-9/64" Up to 1-27/32".
198.(22) Assorted Slot Cutters, Overall Dia. From 3" Up to 7-3/4", Cutting Thickness From Approx. 1/8" Up to 1", Arbor Hole From Approx. 7/8" Up to 1-1/4".
199.Large Assortment of Mainly 3/8" Hold down Hardware Including: T-Nuts, Bolts, Parts Holder, Step Blocks, and More Shown.
200.Bridgeport Series I-2HP Vertical Milling Machine with Riser, 9"x42" Table, 22" Longitudinal Travel, 12" Cross Travel, Variable Spindle Speeds: 4200 RPM, R-8 Spindle Taper, One Shot Lubrication, Bridgeport Old Style Power Table Feed, 2 HP, 220 Volt, 3 Phase, s/n: 206955 (New1990's), Approx. 57"x60"x90", Approx. 2100 lbs.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

201.Assorted Inspection Tools, Includes (4) Indicators and (6) Magnetic Bases.
202.Kennedy Tool Chest with (7) Drawers.
203.Starrett No. 224 Micrometer Set, 6" to 12" Range, .001" Graduation, Includes Standards and Wood Case.
204.Eron Angle Plate, 8"x10"x12", Approx. 1-3/8" Thick.
205.Meyer Model M-1 Gage Plug Set, .061-.250 Minus. Set Not Complete, Also Includes (36) Piece Gage Block Set.
206.(3) Partial Sets of Inside Micrometers,
207.(20) Solid Carbide Endmills, Mostly 4 Flute, Dia. From Approx. 1/8" Up to 5/8".
208.(27) HSS MT#3 Drills, Flute Length From 1-1/2" Up to 6-1/2", Dia. From 1-7/32" Up to 1-19/32".
209.(16) Large Taps, and a Tap Handle, Taps From 3/4-14NPT Up to 1-7/8-12.
210.Excel Model E7575 Hydraulic Ironworker, 1/2" Shear Capacity, 12" Shear Blade, 1/4" - 5/8" Mild Steel Punch Capacity, 3/4" Max. Mild Steel Punch Capacity, 12" Punch Throat, Foot Treadle, 7.5 HP, 230/460 Volt, 3 Phase, s/n: 7016, Approx. 70"x28"x68", Approx. 3500 lbs.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

211.Kurt Model D675 Precision Machine Vise w/ Custom Chip Guard and Part Spacer.
212.Approx. (35) New Fagersta Super High Speed Tool Bits From 1-1/4"x1"x7" Up to 2-1/4"x1"x7", Sizes as Shown In Pictures.
213.(16) Assorted Plug Gages, .4999" to 1.233".
214.Bridgeport Horizontal Milling Attachment.
215.12" Drill Press Vise with 21" Jaws (No Handle)
216.Heavy Duty Work Bench with 60" x 29" x 1/8" Top Plate and 37" Table Height. Comes with 40 Taper Presetter and 6" Benchtop Vise with Swivel Base.
217.Floor Mounted Jib Crane with CM 1/4 ton Electric Chain Hoist, 1/4 hp, 16 fpm, 1-Phase, Pendant Control, 6" Column Diameter, 88" Max Under Rail, 96" Arm Length. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
218.(4) Assorted Milling Arbors and (5) Cutters.
219.(11) Adjustable Reamers up to 15-1/2" L x 2-3/4" Diameter, 2" Shank Diameter.
220.Dianichi Model DH-96 Gap Engine Lathe, 28/38"x96" Rated Capacity, 28" Swing Over Ways, 18" Swing Over Cross Slide, 10" Gap Length, 16 Spindle Speeds: 12 to 1200 RPM, 2" Hole Thru Spindle, Inch/Metric Threader, 4-Way Tool Post, Taper Attachment, Hardways, 12" 3-Jaw Chuck, Cam Lock Type, Steady Rest, Trava-Dial, Coolant/Chip Tanks (No Pump), 15 HP, 220/440 Volt, 3 Phase, s/n: 8135 (1973), Approx. 167"x55"x62"(Top of Steady Rest).

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

221.Approx. (37) Assorted Thread Ring Gages, 1/4-28 to 1 1/4-12, Most Go/NoGo, Also Includes Some NPT Gages.
222.(18) 11/16" HSS Drills, #2 MT Shank.
223.Huot 3-Drawer Fractional Drill Cabinet with Drill Bits.
224.(2) Partial L&I HSS Reamer Sets with Wood Cases. (1) .1570-.2280 and (1) .3593-.500
225.Heavy Duty Metal Bench, Contents Not Included, Approx. 57"x24"x31-1/2".
226.(2) Jacobs Drill Chucks on #3 MT Shanks. (1) no. 14N, 0-1/2" and (1) 3A-3, 0-1/2".
227.SPI Model 76-010-8 Tapping Head. 5/16" to 3/4" Capacity, 3/4" Shank DIameters and (7) Flex Collets.
228.(2) Partial Sets of Scherr-Tumico Tubular Micrometers, .001" Graduation, (1) 12"-16" & (1) 14"-18".
229.Mitutoyo No. 126-138 Pitch Micrometer, 1"-2" Range, .001" Graduation, Ratchet Stop, Set May Not be Complete.
230.Miller Deltaweld 650 Constant Potential DC Arc Welding Power Source, Output: 44 Volts, 650 Amps, 100% Duty Cycle, 60 Max OCV, Input: 230/460 Volt, 3 Phase, On 2-Bottle Cart, s/n: JE772201, Approx. 31"x56"x45".
231.Troyke Model U-9 9" Rotary Table, s/n: 2645-5.
232.(5) Assorted Micrometers, (1) Mfg NA, 1"-2" Range, .0001" Graduation, Ratchet Stop, (1) Starrett 2"-3" Range, .001" Graduation, Ratchet Stop, (1) JT Slocomb, 3"-4" Range, .001" Graduation, (1) JT Slocomb, 4"-5" Range, .001" Graduation, (1) Brown & Sharpe, 5"-6" Range, .001" Graduation.
233.Mitutoyo No. 511-163 Bore Mic Set, .7" to 1.4" Range, .0001" Graduation.
234.(4) Drill Index Stands, (1) Letter,(1) Number, and (2) Fractional, Includes Drills Shown.
235.(13) HSS MT#4 Drills, Flute Length From 3-1/2" Up to 9-1/2", Dia. From 1-3/32" Up to 1-3/4".
236.Assortment of Cutting Tools Including Slotting Cutters, Woodruff Cutters, Endmills, and More Shown.
237.Assortment of Endmills, From 7/64" Up to 7/8".
238.(15) HSS MT#4 Drills, Flute Length From 3-1/2" Up to 9-1/2", Dia. From 1-7/32" Up to 1-19/32".
239.(50) Assorted Slot Cutters, Overall Dia. From 2-3/4" Up to 5", Cutting Thickness From 1/4" Up to 3-1/8", Arbor Hole From 1" Up to 1-1/4".
241.1" Capacity Threading Head on 1-3/4" Shank with Assorted Thread Chasers.
242.Group of Machine Parts Including Air Fittings, Springs, Readouts, Electrical Items, and More.
243.Aloris DA Double Sided Tool Post with (1) DA1 and (1) DA2 Holders.
244.Jacobs no. 14N Drill Chuck on #3 MT Shank with #3-#4 MT Adapter, 0-12" Capacity.
245.6 Shelf Metal Storage Unit, Overall: 36"x18"x74, Contents Not Included.
246.Bridgeport Right Angle Milling Head, R8 Taper.
247.CM Lodestar 1/4 ton Electric Chain Hoist, Pendant Control, 3-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
248.(2) Jacobs 3A-3 Drill Chucks, 1/8" - 5/8" on #3MT Shank and (1) with #2MT Shank.
249.(3) Jacobs Drill Chucks on #3 MT Shanks. (1) no. 6A, 0-1/2", (1) No. 34, 0-1/2".
250.Ikeda Model RM-1300 4' x 13" Radial Arm Drill, 12-Spindle Speeds: 30 to 1440 RPM, 4 Power Feeds: 0.004" to 0.021" IPM, No. 5 Morse Taper Spindle, Power Elevation, Electric Clamping, Coolant System, 5 HP, Three Phase Motor and Controls, s/n 73112 (1973), Approx. 80"x36"x96", Approx: 8,000 Lbs. Note: Box Table Not Included, See Lot 261.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

251.(11) Assorted Thread Plug Gages, 1/4-28 to 1 1/2 -12.
252.Rohm Spiro 0-3/8" Keyless Drill Chuck on #2 MT Shank.
253.(15) Assorted HSS Reamers, Mostly Adjustable, Sizes up to 1-1/4".
254.Approx. (36) HSS Straight Shank Drill Bits, Sizes up to 1-1/4".
255.Approx. (30) HSS Reamers, Sizes up to 29/32".
256.Jacobs No. 18 Drill Chuck on 2" Shank, 1/8" to 3/4" Capacity.
257.(2) Metal 5 Shelf Storage Shelving Units, Each Measures 36"x12"x75".
258.Bridgeport Right Angle Milling Head, R8 Taper.
259.Approx. (70) HSS MT#2 Drills, Flute Length From 2" Up to 6", Dia. From 1/2" Up to Approx. 1-1/16".
260.Voest Model Apollo 524 Gap Bed Engine Lathe, 20/16"x60" Rated Capacity, 21" Swing Over Ways, 15" Swing Over Cross Slide, 12" Gap Length, 18 Spindle Speeds: 21 to 1500 RPM, 2-3/4" Hole Thru Spindle, 4-Way Tool Post, Inch/Metric Threader, Trav-A-Dial, 12" 3-Jaw Chuck, 16" Face Plate, 9-1/2" Drive Dog Plate, Hardways, Change Gears, Coolant, 10 HP, 3 Phase Motor & Controls, s/n: 1038-1.5-11022(1969), Approx. 109"x45"x54".

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

261.Plain Box Table, 26"x18"x16.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

262.(30) Assorted Slot/Slitting Cutters, Dia. From Approx. 1-3/4" Up to 6", Arbor Hole From Approx. 5/8" Up to 1-3/16".
263.Kurt 6" Anglock Precision Machine Vise with Handle.
264.Approx. (55) HSS #2 Drills, Flute Length From2" Up to 6", Dia. From 37/64" Up to 13/16".
265.(15) Mainly Large Dia. Taps, From 1-1/16-11 Up to 1-1/4-11 1/2NPS.
266.Assorted HSS Reamers, Sizes up to 21/32".
267.(3) Aloris DA1 Tool Post Tool Holders.
268.(2) Drill Chucks. (1) Supreme no. 23T3 on #4 MT Shank, 0-1/2", AS IS, and (1) Jacobs No. 14N, 0-1/2" on #2MT Shank.
269.(2) Metal Shelving Units, (1) 5 Shelf Measures 36"x36"x85", (1) 4 Shelf Unit Measures 42"x24"x61".
271.Mitutoyo Code No. 515-319 12" Height Master.
272.Scherr-Tumico 18"-24" Tubular Micrometer, .001" Graduation, Includes Standards and Wood Case.
273.(2) 26" x 25" x 35" 2-Door Cabinets and (2) 36" x 12" x 88" Metal Shelves (Contents NOT Included).
274.Etalon 40" Inside/Outside Vernier in Wood Case.
275.Scherr-Tumico Micrometer, 9" to 12" Range, .001" Graduation, Ratchet Stop, Missing (1) Standard, In Wood Case.
276.Jacobs No. 18 Drill Chuck, 1/8" to 3/4" Capacity.
277.CM Lodestar 1/2 Ton Electric Chain Hoist with Pendant Control, 3-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
278.Approx. (75) New Fagersta Tool Bits, From 3/4"x5/8"x4" Up to 1" Square Shank x5-1/2" Length.
279.36" x 18" x 61" Metal Shelf wih Several Sets of Custom Steel Chuck Jaws.
280.Hem Model H101A Horizontal Band Saw, 12-3/4"x12-3/4" Capacity, Variable Blade Speeds: 60 to 300SFPM, 1-1/4" Blade Width, Auto Bar Feed, 10' Roller Conveyor, Coolant, 5 HP Motor, 3 Phase. Approx. 108"x106"x72", Approx. 3500 lbs.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

281.(26) TG 100 Collets. Sizes up to 1".
282.(3) Jacobs Drill Chucks on #3 MT Shanks. (1) no. 34-02, 0-1/2", (1) No. 3A, 1/8" to 5/8" and (1) no. 14N, 0 to 1/2".
283.Bergmans Model 4100 10" 3-Jaw Lathe Chuck, Approx. 2-1/4" Hole Thru, Bolt-On Type.
284.Metal Frame Table, Overall: 54"x32"x32".
285.Lyon Metal Table, Overall: 60"x28"x34", Contents Not Included, Last Days Removal Only.
286.Multi Compartment MT Drill Index Shelving Unit, Overall: 34"x17-1/2"x62".
287.(40) Assorted HSS Taps, Sizes From 1/4-28NF Up to 1-12NF.
288.20 Drawer Organizer w/ Contents of Hundreds of Mainly New Taps, Overall: 18"x11"x11".
289.Custom Built Rolling Shop Cart, Overall: 40"x24"x37".
290.Dianichi Model DLG-50 Gap Bed Engine Lathe, 24/32"x54" Rated Capacity, 24" Swing Over Way, 12" Swing Over Cross Slide, 12" Gap Length, 12 Speeds: 34 to 1000 RPM, 2" Hole Thru Spindle, 4-Way Tool Post, Steady Rest, Follow Rest, Inch/Metric Threader, 12" 3-Jaw Chuck, 14" 4-Jaw Chuck, 20" Face Plate, Hard Ways, Tra-A-Dial, Change Gears, s/n: 5647 (New 1968), Approx 114"x50"x55".

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

291.(4) 120 V. 4-1/2" Angle Grinders, (2) Dewalt, (1) Freud, and (1) Appears Makita.
292.Cushman 10" 3-Jaw Lathe Chuck, Approx. 2-3/4" Hole Thru, Stamped "Fits Haas 3.25L SHCS".
293.Tool Post Grinder, Mfg NA, Needs New Switch, 1 HP, 115 Volt.
294.Jacobs No. 18N 1/8" to 3/4" Drill Chuck on 1-1/2" Shank.
295.(14) Mainly Dead Centers.
295.1.(5) Custom Made Metal Shelving Units / Work Stations.
296.Assortment of Drills, Dia. From 39/64" Up to 15/16".
297.2-Door Tennsco Shop Cabinet. 36" x 24" x 78" Overall and (2) Metal Shelves.
298.(2) Roller Stands, 12" Rollers, 40" Height.
299.Assortment of Tools and MT Adaptors.
300.Induma Model 1-S Vertical Milling Machine, 9"x42" Table, 33" Longitudinal Travel, 12" Cross Travel, Belted Spindle Speeds: 80 to 2713 RPM, R-8 Spindle Taper, 1-HP, 220 Volt, 3 Phase, s/n: 5465, Approx. 63"x67"x83", Approx. 2100 lbs.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

301.(11) HSS MT#4 Drills, Flute Length From 3" Up to 8", Dia. From 1-9/64" Up to 1-13/16".
302.Approx. (90) Drills and (2) Drill Holders, Flute Length From 1-1/2" Up to 4-1/2", Dia. From Approx. 1/16" Up to 7/16".
303.Kurt 6" Anglock Precision Machine Vise with Custom Set of Jaws.
305.Quin-Air 5 hp Reciprocating Type Air Compressor with Approx. 40 Gallon Horizontal Receiver Tank, Quincy Model 325 Head, 230/460 volt, 3-Phase, 62" x 28" x 54" Overall. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
306.Taiwan Made Drill Chuck with #3MT Adapter.
307.Northern Tool 1/2-Ton Manual Chain Hoist.
308.Assortment of HSS Toolbits. Mainly 5/16" Up to 1/4" Square Shank.
309.Assortment of Hold Down Hardware, Mainly 1/2".
310.Brown & Sharpe, Validator 50 Model 700-50-2010, Measuring Range: X-27", Y-20",Z-10", Work Capacity: X-29", Y-36", Z-10-1/2", Max. Load 3000 lbs., Readout Resolution - .0001", Also Includes Assorted Accessories, s/n: 700-50-620, Approx. 48"x38"x85"(Less Readout Stand), Approx. 1800 lbs.
311.(3) Assorted Drill Chucks, (2) No. 14N, 0-1/2" and (1) SF, 5/8".
312.SRM Precision Model HMP-10 10" 3-Jaw Lathe Chuck. 2-1/2" Hole Thru, Bolt-On Type.
313.Tru-Center Drill Stand Model 50-10 Mountable Drill Base w/ Milwaukee 1/2" Drill, 110V.
314.Assortment of Hand Tools Including Oilers, T-Handle Allen Wrenches, Hammer, Files, Wrenches, Levels, Adjustable Wrenches, and C-Clamps.
315.#5 MT Quick Change Tool Holder w/ Assorted Buchings Fro MT 2 + 3 Tools.
316.Assortment of Drills and Reamers, Including Reduced Shank Type, MT Type, Dia. From 1-1/32" Up to 2-5/8". Flute Length From 2" Up to 11-1/2".
317.Assortment of MT Adapters and Boring Bar Sleaves, Mainly w/ 2-1/2" Outside Dia.
318.Assortment of Hand Tools Including Files, Stamping Sets, Allen Wrenches, Wrenches, and C-Clamp.
319.Approx. (75) Assorted Mainly Larger Dia. Endmills, Dia. From 1/2" Up to 1-1/8".
320.Rockford Model "Hydraulic" Open side Planer, 21"x36" T-Slot Table, 36" Table Travel, Swiveling Rail Head, Side Head, Hydraulics, 10 HP, 220/440 Volt, 3 Phase, s/n: 73-HU-25, Approx. 117"x60"x84".

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

321.Approx. (5) Mostly Large Dia. Drills, Dia. From 1/2" Up to 1", Includes Index Shelf.
322.(12) Assorted Drills Including (6) Extra Length HSS MT#4 Drills, (5) Extended Length Straight Shank Drills, and (1) Insert Type Spade Drill, Overall Flute Length From 4" Up to 6-1/2", Dia. From Approx. 3/16" Up to 3".
323.Approx. (75) Assorted Mainly Endmills, Dia. From 7/32" Up to 1".
324.(9) Solid Carbide Endmills, 4 Flute, Dia. Appears Mainly 1/2".
325.Assortment of Cutting Tools and More Including Drils, Straight Shank, and MT, Tap, Reamers, and Adapters as Shown.
326.(12) Insert Type Cutting Tools, Mostly 1" Square Shank.
327.Approx. (100) Cutting Tool Inserts Including Seco, Mitsubishi, Carbaloy, and More.
328.50 Drawer Cabinet w/ Contents of Hundreds of Mainly New Drills, Mostly Smaller Dia.
329.Approx. (110) Cutting Tool Inserts Including Seco, Kennametal, Ceratip, and More Shown.
330.Induma Model MM300 Plain Horizontal Milling Machine, 14"x67" T-Slotted Table, 49" Longitudinal Travel, 14" Cross Travel, 19" Travel of Knee, 12 Speeds: 30 to 1500 RPM, 18 Feeds: 13/32" to 33 ipm, #50 Taper Spindle, Induma Model TV50 Vertical Head, Overarm Supports, Arbors, Tool Holders and More, 10 HP, 3 Phase, s/n: 733399, Approx. 91"x84"x75", Approx. 7900 lbs.

Click Lot for Video of this Machine.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

331.(4) 120 V. Power Tools Including (1) Black and Decker 7-1/4" Saw, (1) Milwaukee Cat. No. 5460 Angle Grinder, 5/8" Arbor, (1) Ridgid Model R7001 3/8" Drill Driver, and (1) Sioux Drill.
332.(5) 120 V Tools Including Angle Grinders, Dremel, Palm Sander, and More.
333.Assorted Taps, Mostly New, Sizes up to 7/8"-9.
334.Assortment of Grinding Wheels, Mostly Used.
335.Assortment of Inspection Items Including 120V. Miti-Mite ElectroMagnet Indicator Stand, Thread Measuring Wires, Yuasa No. 300-005 Dial Indicator, .001"-1.000", Scherr Tumico Depth Guage, Tesa ID Mic., .800"-1", .0002 Graduation, and 0-1" Pitch Mic.
336.(30) HSS MT#3 Drills, Flute Length From 2-1/2" Up to 6", Dia. From 23/32" Up to 1-5/32".
337.Zeks Model 18H3XXX 00 Heat Sink Compressed Air Dryer, 15"x 14" x 19". (Note: Currently Mounted Inline with Compressor Plumbing. Buyer is Responsible for Safe Disconnect and Removal of this Lot)
338.Large Assortment of Drills, Including MT, Extended Length, and More, Dia. From 1/4" Up to 1/2".
339.Assortment of Items Including (2) Retaining Ring Kits, (1) O-Ring Kit, and Assortment of Snap Coolant Fittings.
340.Hardinge Model HC Automatic Chucker, 1-11/26" Round Bar Capacity, 13" Swing Over Bed, 12" Longitudinal Travel of Turret, 5" Cross Travel of Turret, Variable Spindle Speeds: 125 to 3000 RPM, Collet Closer, 5" 3-Jaw Chuck, Coolant, 1-1/2 HP, 3 Phase Motor and Controls, s/n: HC6015T, Approx. 70"x30"x62", Approx. 2000 lbs.

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.

341.(30) HSS MT#3 Drills, Flute Length From 2-1/2" Up to 5-1/2", Dia. From 27/32" Up to 1-7/64".
342.Assorted Shop Supplies Including: Grinding Wheels, Allen Wrenches, Oil Mister and More.
343.(4) Angle Grinders, (2) Dewalt, (1) DW840, (1) D28474, (1) Ridgid Model R1020, and (1) Milwaukee Needing Brush Repair.
344.Senco Model DS275-18V, 18V. Automatic Drill w/ Feed Belt, Charger, Case, and Many Extra Feed Belts.
345.Approx. (250) Cutting Tool Inserts Including Spe-D-Cut, Carmet, and More Shown.
346.Kurt 6" Anglock Precision Machine Vise with Handle.
347.Assorted Letter and Number Stamps.
348.Approx. (120) Cutting Tool Inserts, Including: Sumitoma, Kennametal, Seco, and More.
349.Cushman 10" 3-Jaw Lathe Chuck, Approx. 3" Hole Thru, Extra Jaws, Bolt-On Type.
350.Setco Industries Model 102 Double End Grinder, 8" Wheel Capacity, Eye Shields, Work Light, 2 hp, 220 volt, 3-Phase, 33" x 22" x 48" Overall. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
351.(8) Custom Insert Type Cutting Tools, Mostly 1" Square Shank.
352.145" x 39" x 35" Wood Frame Shop Table. (Vise NOT Included)
353.Assorted HSS Drill Bits, Easy Outs and More.
354.(11) Insert Type Boring Bars, Shank Dia. From 3/8" Up to 1", Length From 1-1/2" Up to 8".
355.Assorted Hold Down Hardware, Lathe Jaws and More.
356.Assorted Taps, Dies and Die Handles.
357.(15) Assorted Boring Bars and (1) Boring Bar Collet Type Sleave, Shank Dia. From 5/8" Up to 1", Shank Length From 1-1/2" Up to 9-1/2".
358.(14) Assorted BT40 Taper Tool Holders. (Note: Lot Tag in Photo is not the Actual Lot Number)
359.CM Lodestar 1/2 Ton Electric Chain Hoist, Pendant Control, 330 volt, 3-Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
360.Assortment of Carbide Misc. Inserts, and More.
361.Assorted Sprockets. (7) 4-3/16" Dia, 1-1/2" Arbor, (2) 8" Diameter with 2-3/8" Arbor and (1) 8" Diameter with 1-1/4" Arbor.
362.(3) Favor Dead Centers. 3/4" Shanks.
363.(2) NMTB 40 Taper Boring Bar Tool Holders.
364.(7) Command B4C4-1000 BT40 Collet Holders.
365.(3) Regulator Valves. (2) Smiths and (1) Union Carbide.
366.(6) BT40 Endmill Type Tool Holders, Dia. From Approx. 5/16" Up to 1-1/4".
367.(3) Metal Frame Work Stations.
368.Boston Cat. No. F730B4OX353 Worm Gear Speed Reducer, 4:1 Ratio, 1-1/4" Shaft Diameter.
369.(5) Cat 40 End mill Type Tool Holders, Dia. From Approx. 1/4" Up to 3/4".
370.Troyke 9" 3-Jaw Lathe Chuck, Appros. 2-3/4" Hole Thru, Bolt-On Type.
371.Palmgren 4" Drill Press Vise.
372.BT40 Criterion Model DBL-203 Adjustable Boring Head w/ (2) Extra Length Collet Holders, Dia. 11/16".
373.(2) Flatbed Shop Carts, (1) 24" x 40" and (1) 27" x 48".
374.(2) 48" x 24" x 39" Wire Shelves.
375.60 Drawer Organizer w/ Contents of Hundreds of Mainly New Letter Drills.
376.(2) BT30 Taper Holders. (1) Command B3X3-0003 Microbore, (1) Command B3T4-0002 Quick Change Tap Holder.
377.Group of Assorted Maintenance Items Including: Fasteners (Some Stainless), Fittings, 34" x 12" x 42" Pigeon Hole Cabinet and More.
378.(55) Assorted Collets Including (11) DA20 and More Shown.
379.Criterion Model DBL-204 Adjustable Boring Head on BT40 Shank.
380.Waida Model DW-31 Tool and Cutter Grinder, 6" Wheel Capacity, 17" x 8-1/2" Table, 10-1/4" x 9" Table, 220 volt, 3-Phase, 33" x 22" x 44" Overall. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
381.(20) ER-16 Collets From 5-4 Up to 5-10.
382.36" x 25" x 37" Foremans Desk and (2) Metal Shelves.
383.(2) All-Steel 2-Door Cabinets. 36" x 18" x 78" Each.
384.(2) BT40 Tapping Head Tool Holders, (1) B4T4-0002, (1) B4T4-0001, w/ (23) Assorted Collets From XTC1-0006 up to XTC1-0562.
385.(15) Assorted BT30 Endmill Holders.
386.Continental Model DPF14-500 Drill Press. 5/8" capacity, #2MT Spindle, (12) Speeds from 280-3650 RPM, 7" throat, 9-3/4" x 9-3/4" Table, 3/4 hp, 115 volt, 1-Phase, 16" x 26" x 67" Overall.
387.(4) Command BT40 Tool Holders, (2) B4C4-1000 Collet Type, and (2) MT Tool Holders (1)MT3, (1) MT4.
388.(3) Small Parts Cabinets with Contents. (1) 34" x 11" x 10" and (2) 18" x 11" x 11".
389.12" 3-Jaw Lathe Chuck, Approx. 3" Hole Thru, Bolt-On Type.
390.(6) Command BT40 Shell Mill Type Tool Holders.
391.(9) Assorted BT30 Taper Tool Holders.
392.Large Group of Assorted Inserts, Makes/Models as Shown.
393.Assortment of Countersinks.
394.(4) Assorted Quick Change Tap Holders. (1) BT30 and (1) BT40
395.Assorted Insert Type Boring Bars Including: Kennametal A24U-MWLNR4-NE6, A20-DCLNR4 and More.
396.(8) Mainly Comand BT40 Endmill Type Tool Holders, Dia. From Approx. 1/8" Up to 5/8".
397.Buck 12" 3-Jaw Lathe Chuck, Approx. 3" Hole Thru, Bolt-On Type.
398.Do All Grade B 24" x 18" x 3" Granite Inspection Plate on Metal Stand.
399.(5) Mainly Command BT40 Collet Type Tool Holders, Including: (4) B4C4-0016 Extended Reach, and (1) B4C4-0016 Normal Length.
400.(13) Assorted BT30 Taper Collet Holders.
401.Metal Frame Wood Top Table. Approx. 48"x32"x33".
402.(1) Heavy Duty Metal Table, Top is 1/4" Plate, Approx. 22"x24-1/2"x33-1/2" and (1) Mobile Metal Cart, Wood Top, Approx. 19-1/2"x24"x35".
403.2-Door Metal Cabinet, Approx. 36"x18"x72".
404.Mobile Work Table, Metal Frame, 43-1/2"x25"x38".
405.Heavy Duty Shelf Unit, Steel Frame, 23"x18-1/4"x72".
406.Heavy Duty Rolling Shop Bench with 45" x 25" x 3/8" Top Plate. 41" Bench Height, Contents NOT Included.
407.Metal Framed Shop Bench. 41" x 24" x 40".
408.Large Assortment of New Cutting Tools Including Fagersta Tool Bits, Dove Tail Form Blanks, Dove Tail Shave Blanks, Types as Shown In Photos.
409.Assortment of New Fagersta Super High Speed Tool Bits, From 3/8" Square Shank x 4" Length Up to 2"x1"x7-1/2".
410.Approx. (75) Fagersta Super High Speed Boring Bar Blanks, Dia. From 1/4" Up to 1", Length From 3" Up to 11".
411.8 Drawer Parts Cabinet, Each Drawer Has (2) Removable Trays, Overall: 23"x28-1/2"x52".
412.Multi Shelf Parts Organizer, Overall: 74"x18"x85".
413.(3) Custom Built Tables, Includes (12) Sets of Legs Legs Measure 30" Wide x 32" Tall, Contents of Tables Not Included.
414.7 Shelf Storage Rack, Overall: 36"x36"x85".
415.Assortment of Plastic and Vinyl Stock Lengths, Including Approx. (25) 42" 3/4" PVC Dia Tubing, with one End Threaded, and Approx. (700) Pieces of White Vinyl Tubing, Approx. 120" Lengths, 1/2" Dia, and More Shown.
416.Lincoln Electric Welding Mask with Viking Lens.
417.Assorted Welding Rod Including: Weldcote ER308/308L and More.
418.(13) Assorted Insert Type Cutting Tools, Including Boring Bars, and Square Shank Cutters, and Bit Type Bars.
419.(2) Custom Built Metal Frame Work Stations, (1) 37"x28"x52", (1) 42"x25"x36", Contents Not Included.
420.Contents of Table Including Large Assortment of mainly 5/8" Hold Down Hardware, Including Threaded Rods, T-Nuts, Bolts, Feet, Straps, Risers, and More Shown. Table Not Included.
421.(7) Insert Type Boring Bars, Dia. From 1/2" Up to 2", Shank Length From 5-1/2" Up to 14".
422.(2) #4MT Drill Chucks, (1) Jacobs 14N 1/2" Cap, (1) 3/4" Cap.
423.Approx. (115) Cutting Tool Inserts, Including Mitsubishi, Sandvik, Seco, and More.
424.Approx. (200) Cutting Tool Inserts, Including Sandvik, Kennametal, Mitsubishi, Sumitoma, Seco, and More.
425.Ritten #5 MT Live Center.
426.(8) Cutting Tools Including (1) Dceratip Indexable 1" Square Shank Cutting Tool.
427.(25) Insert Type Cutting Tools, Mostly 1" Square Shank, Average Shank Length 4-3/4", Includes (1) Appears New Seco CRGNL-16-4 Cutting Tool, and Many More Shown.
428.Heavy Duty Welding Table with 47" x 36" x 7/16" Top Plate, 31" Table Height. R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (763) 347-8650 for more information.
429.(4) 96" Wide x 75" H Metal Framed Welding Curtains.
430.(3) Stock Pieces of Aluminum, 6061-T651, .075 Thickness, Type 200 Tooling Plate, Sizes (1) 16-1/2"x12-1/2", (1) 61-1/2"x11", (1) 125"x11".
431.(2) 55 Gallon Drum Dollies, 15"x10" Platform.
432.Metal 55 Gallon Drum Dolly with Latch Top.
433.(2) Wheel Barrows.
434.(5) Welding Curtains w/ Stands, (4) 95"x74", (1) 72"x75".
435.Stock Rack With Contents of Large Assortment of Metal Stock Including Flat Stock, Bars, Stainless, Galvanized, Round Stock, and More, Length From 20" Up to 252", Rack Measures: 160"x40"x112".
436.(3) Bar Clamps From 40" Up to 50".
437.(23) Clamps, Primary Use for Welding Including (11) 4" Throat Vise Grips, (5) 4"Cap. X 3" Throat C-Clamps, and More Shown.
438.Stock Metal on Floor Including Bar Stock and Flat Stock, Flat Stock Length From 20"x6"x9/16" Up to 242"x6"x9/16", Round Stock From 30-3/4" x 6" Dia. Up to 117"x2-1/4" Dia.
439.2-Wheel Torch Cart with Regulator, Hose and Hose Reel.
440.Lot of Assorted Abrasives including: Klingspor KM613 Wheels, Drums, Sait A24R-BF Grinding Wheels and More.
441.Assorted PPE Including: (3) Jackson Weld Masks and (3) Face Shields.
442.(3) Spools of .045" Welding Wire. (2) Postalloy 2898-SPL, 33 lb and (1) Washington Alloy TN9917, 33 lb.
443.(3) Spools of Welding Wire. () Crown Alloy ER316L, .045", 13 lb. (1) Postalloy 97-SPL, .045", 5 lb and (1) Harris 00SIBF5, .035", 10 lb.
444.Assorted Welding Consumables as Shown.
445.Heavy duty Metal Framed Welding Table with 30" x 20-1/2" x 1" Top Plate. 34" Table Height.
446.Large Group of Assorted Hand Tools.
447.6" Belt Sander. 12" x 6" Table, 1-Phase, 22" x 26" x 54".
448.Assortment of Welding Items Including Welding Stick Clamp, (1) Appears New Bernard Cat. No. Q4015AE8EMC Tig Welding Gun and Hose, Regulators, Oxy-Acetelene, Torch Components, and More.
449.Large Assortment of Grinding, Cutting Discs. Dia. From 4-1/2" Up to 16".
450.Assortment of Welding and Brazing Rods.
451.Stand w/ Assortment of Mig Welding Wire.
452.Assortment of Stock Metal and Rack. Bar Stock From 5-1/2"x4"x1" Up to 42-1/2"x5"x1-1/2", Round Stock From 1-1/2"x6" Dia. Aluminum Up to 17-1/2" x4-5/16" Steel, Also Includes Multiple 32"x13" Dia. Pipe Pieces, and More Shown, Rack Measures 41"x18"x73".
453.Work Station, Overall: 35"x27"x33-1/2" Table, Back Goes Up to 67".
454.55 Gallon Drum Dolly, 10"x15" Platform, Overall: 42" Tall.
455.36" x 24" x 78" 2-Door Cabinet.
456.Metal Framed Shop Bench. 60" x 24" x 30".
457.Approx. 50 lb Propane Tank with Torch Head.
458.Heavy Duty Welding Table wit 60" x 42" x 1-1/4" Top Plate. 36" Table Height.
459.18" Shop Fan on Pestal Base.
460.Group of Assorted Extension Cords.
461.(2) 8' A-Frame Ladders. (1) Wood and (1) Husky Model 01-4800-1.
462.Group of Fagersta Inc. Plaine Cut Off Tool Blanks From .070 Up to 5/8"-11.
463.(3) Pedastal Tables, 42"x42"x30" and (3) Retro Chairs.
464.(2) 4 Drawer Small Parts Cabinets, Each Measures 19-1/2"x17-1/2"x10-1/2".
465.Contents of Office Including Desk 66"x36"x24", Credenza 76"x20"x29", (2) Chairs, Couch, (2) End Tables, and More Shown.
466.Contents of Room Including Lateral File Cabinet, Drafting Table, Coat Rack, Desk, and More Shown. Computer Not Included.
467.Contents of Room Including (2) Desks, Chairs, and More Shown, Computer Not Included.
468.Contents of Room Including L-Shaped Desk, Chair, and 2 Drawer Lateral File Cabinet.
469.Contents of Room Including Desk 72"x36"x29", Rolling File Cart, and Credenza 42"x20"x29".
470.Contents of Office Including Desk 72"x36"x29", Lamp, Chair, and Artwork.
471.L-Shaped Desk, Overall FotPrint 60"x66"x30".
472.CM Loadstar Series 627 Model F , 1/2 Ton Electric Chain Hoist, w/ Pendant Control , 110/120V Single Phase. (Note: Buyer is Responsible for SAFE Disconnect of Power and Take Down of this Lot)
473.Metal Bench, Overall: 88"x24"x33".
474.Justrite 21 Gallon Oily Waste Can.
475.Dual Transformer Power Bank w/ Shut Off Box. 240/480V, 120/240V Overall Unit Measures 22"x9"x24".
476.Sellers Tool and Cutter Grinder