Hoff Online Auctions
July Machinery Exchange 2018 - Thursday, July 5, 2018 Thursday, July 19, 2018- Starting at 10:00am Central

Item Description
1.Yale Model MEW2-45RT1452 Electric Cable Hoist. 1.5 Ton Capacity, 14 FPM Hoist Speed, 30 FPM Trolly Speed, Pendant Control, 460V 3-Phase, s/n: CK5354VK.
2.Torit Model VS100 Dust Collector. Filter Type, 8" Duct Connection, 3HP 208V 3-Phase Motor, s/n: TG20728. Approx 27"x29"x63" Seller Notes: Bought new, never used.
3.Dynamic Balancer Model MUG-T Wheel Balancer. 1 1/2" Diameber Beam, Approx 8" Center Between Beams, with Amplifier, 21 7/8"x14 1/4"x16 3/4"
4.Diatest Split Ball Bore Gage. .0625" to .1600 Measuring Range, Right Angle Adapter and Standards in Wooden Case
5.Flex-Arm Tool Support/Guide Arm. Approx 34" Reach
6.Heck Industries Model 4000 Bevel Mill. 3/4" Max Bevel, 15 to 45 Degree Bevel Angle, 110V, s/n: 5951
7.SMC Industries "Voltmaster" Moderl AR100 Generator. 9500 Watts, 79.2/39.6 Amp, 120/240V 1-Phase, 3600 RPM, Clockwise/Counter Clockwise Rotation, s/n: 00E3851. Approx 22"x12"x13"
9.Dumore Cat No. 5-021 Tool Post Grinder. 10,000 RPM, Extra Ball Bearing Spindle, (4) Assorted Belt Wheels, 115V, Metal Case
10.2005 Sharp Model 1340VS Removable Gap Engine Lathe. 13"/18 1/2" Swing Over Bed/In Gap, 40" Between Centers, 1 9/16" Hole Thru Spindle, 8 5/16" Swing Over Cross Slide, Variable Spindle Speeds: 40 to 2000 RPM, Will Cut (39) Standard Threads: 2 to 56 TPI, Will Cut (42) Metric Threads: .5 to 12mm, Hard Ways, 6" 3-Jaw Chuck, 4-Way Tool Post, Threading Dial, Foot Brake, Coolant Tailstock, 3HP 220/440V 3-Phase Motor and Controls, s/n: 43195. Approx 74"x27"x48" and 1600lbs
11.Dynabrade Model 11486 Pneumatic Belt Sander. 4250S SFPM, 1" Belt Width, s/n: 9460
12.Little Giant Model 22 "Dark Horse" Fiberglass Articulating Ladder. 9' 6" Max A-Frame Height, 18' 11" Max Extension Height, Moving Wheels, 300lb Capacity
13.New, Firepower 1442-0050 TIG Torch, 26 SWCUR 12.5' 50mm
14.Pexto Model 137-K Foot Shear. 16Ga X 36" Capacity in Soft Steel, Incomplete 28" Manual Back Gage, s/n: 12/56. Approx 46"x55"x42"
15.New/Lightly Used TIG Welding Foot Control
16.Jacobs Spindle nose Lathe Chuck
19.Taft-Pierce 5" Sine Bar with Wooden Case
21.Beere Tip Shear Deburring Machine, 110V. 18"x22"x10"
22.Hercules Model H-142 2-Wheel Platform Lift Cart. 750lb Capacity, 22"x20" Platform, 4' Max Platform Height, s/n: 3515
23.Big Bear Tool Holder Cart for 40-Taper Tools. (2) Levels, (50) Positions per Level, Solid Bottom Shelf, 36 1/2"x18 1/2"x37"
24.Jacobs .020" to .394" Capacity Keyless Chuck with R8 Shank and Esset Adjustable Table Mounted Work Stop
26.(7) Valenite Aluminum Master Mill Indexable Insert Face Mills, Approx. 5" Diameter, 1-1/2" Diameter Arbor
27.Starrett Weber Gage, Reference Bar, S/N 1.3173R5B1, 3-1/2"x2-1/2"x14" With Case, 20"x8"x8"
28.Electrovert 132 Solder Pot,500W, 120V,300-1000F Temperature Range. Includes Cutler-Hammer E45 48 Control and Assorted Accessories.
29.Marsh Model "S" 3/4" Manual Stencil Machine w/ Oilboard.
30.Sharpe CNC Knee Type Milling Machine, 2-Axis Machine, 9" x 42" Tee Slotted Table, 12" Cross Travel of Table, 28" Longitudinal Travel of Table, 5" Quill Travel, Variable Spindle Speeds: 60 to 4,200 RPM, with Proto Trak M2 CNC Control, 2-HP Main Motor & Controls, s/n: 30119333. Approx 64" x 60" x 84" and 2600lbs
31.XYCom Viewtronix Model SXT1811T Touch Panel. 18" Diagonal, VGA/S-Video/RCA Inputs, 110V, s/n: 698598-5J2. Approx 18 1/2"x15 3/4"x3 5/8"
32.Jacobs Model 16N Ball Bearing Super Chuck on #2 MT Shank. 1/8" to 5/8" Capacity
33. (19) Assorted Disk Brake Pads and Shoes, and (2) Disc Brake Calipers. See Pictures For Part Numbers.
34.(6) Assorted Vehicle Mirrors. Including F-250 and GM.
35.Northstar Reciprocating Type Air Compressor. 2-Stage Pump, Approx 40-Gallon Horizontal Receiver Tank, Honda GX 390 Gasoline Engine with Electric Start. Approx 52"x21"x42"
36.Press Type Spot Welder. 30" Throat, Robotron Controls, Water Cooled, Appros 40"x72"x90" (Height is Current State, Partially Disassembled)
37.Hydraulic Power Unit. 2600psi, 15/34GPM Flow Rate, 58"x28"x18" Reservoir, Heat Exchanger, 75HP 208-230/460V 3-Phase Motor. Approx 70"x36"x64"
38.Assortment of Automotive Seals, Bearings, and More.
39.33 1/4"x26" Plain Box Table. 20 1/4" High, 17 1/4" Vertical Face
40.Haas Model VF3 Vertical Machining Center. 48"x18" T-Slotted Table, 40" X-Axis Travel, 20" Y-Axis Travel, 25" Z-Axis Travel, Variable Spindle Speeds to 7500 RPM, 32-Position Tool Changer, Programmable Coolant Nozzle, Brushless Servos, Chip Auger, Thru Spindle Coolant, Coolant Tank & Pump, Full Enclosure, 15HP Spindle Motor, Haas CNC Control with Pendant, s/n: 10202. Approx 140"x110"x104" and 13,500lbs
41.Gast Model 3080-V128-T337 Vacuum Pump. 2HP 230/460V 3-Phase Motor, s/n: 980104011. 29"x16"x13"
42.Snapper Model 381451HBVE Rear Engine Rider Lawn Mower. 38" Mower Deck, Hydrostatic Transmission, 14.5HP Briggs & Stratton I/C Gasoline Engine, s/n: 95367849
43.(2) Equipto 16-Drawer Stackable Metal Utility Cabinets. 34"x12"x13 7/8" Each
44.(8) Assorted Machinist's Tools Including (2) Brown & Sharpe V-Blocks Nos 750-B 2 3/4"x2 1/2"x2" & 750-A, 1 5/8"x1 1/4"x1 1/4"; (1) Eclipse Magnetic Base Indicator Stand, 9 3/8" Tall, 1/2" Diameter Column; (5) Gage Blocks, 1" to 3"
45.Gagemaster Corp. Cast Iron Comparator Stand with Anvil. 5 7/8"x7 7/8"x 1 1/2" Base, 1 3/8"x9 1/2" Post, 2 1/2"x3 1/2"x1 1/2" Anvis with mitutoyo Digimatic .0001" Indicator with 1/2" Travel and (3) Assorted Tips
46.Bretford Metal 3 Shelf Media Cart with (2) Outlet 10A, 120V Power Strip. 30"x20"48"
47.(3) Indexable Insert Face Mills, Valenite. Approx. 6" Diameter, 1-1/2" Diameter Arbor.
48.Sony Magnescale LH10-2017, Digital Display Unit with Scales SR10-035A. Includes Instruction Manual.
49.Indicator Stand with Mitutoyo Digimatic Indicator .0001-1.2" 12"x14" Base, 12" Height.
50.Grob Model NS18 Vertical Band Saw. 18" Throat, 8 3/4" Max Under Guides, 24"x24" Slotted Compound Tilting Table, (10) Speeds: 50 to 2030 FPM, Blade Welder & Grinder, Bulk Blade Material, 3-Phase Motor and Controls, s/n: 8649. Approx 41"x36"x92"
51.HEIDENHAIN ND 530 Display Unit, Includes HEIDENHAIN 603C, and 303C Sealed Linear Encoders, Mounting Hardware, and Operating Manual.
52.Toro Model 38540 Powershift 824 Snow Blower. 2-Stage, 24" Cut, (4) Forward & (2) Reverse Speeds, Pneumatic Tires, 8HP Gasoline Engine with Plug-In Electric Start, s/n: 5900385
53.Columbian 4" Bench Vise
54.Powerstat Variable Transformer. 1.4kVA, 120V In, 0-140V Out
55.Wells Model 3022-01 4" Precision Machine Vise with Handle Way Guides and Pair of 6 1/2"x 2 3/8"x5/8" Steel Jaws and Manuals
56.Mitutoyo 18" Vernier Caliper
57.Rock of Ages 12"x12"x3" Granite Surface Plate, .000200" Accuracy, s/n: 5024-374.
58.Hammond Double End Buffer. 12" Wheel Capacity, Variable Speed, 3-Phase Motor and Controls, s/n: na. Approx 48"x36"x52"
59.Gast Model 4080-V102 Vacuum Pump. 3HP 208-230/460V 3-Phase Motor, s/n: na. 29"x16"x13"
61.Ames Cast Irono Comparator Stand. 12 1/2"x14 1/2"x1 7/8" with 20 3/4"x1 1/4" Post, Mitutoyo .0001" Digimatic Indicator with 2" Travel and Assorted Tips
62.Toro Model 38050 (724) Snow Blower. 2-Stage, 24" Cut, Pnematic Tires, 7HP Gasoline Engine with Plug-In Electric Start, s/n: 7002351
63.16 1/2"x30 1/2"x32" Metal Shop Cart
64.Pair of Geo. Scher Co. 3 11/16"x1 11/16"x15/16" Manetic Parallels with Wooden Case
65.Starrett No. 440 0-3" Depth Micrometer with Ratchet Thimble and Wooden Case
66.Moore Tool Model 17271 Double Joint Test Indicator Holder with Brown & Sharpe No. 7037-3 Bestest .0005" Indicator and Assorted Accessories in Wooden Case
67.Blak Mfg.. Co. Co-Ax Indicator with Assorted Tips, Instructions and Wooden case
68.Twistair Model A-025TAN4E Air Compressor. Rotary Screw Type, 125psi Max Pressure, Approx 80-Gallon Horizontal Receiver Tank, 25HP 460V 3-Phase Motor, s/n: 208237. Approx 55"x36"x70"
69.(2) Complete Sets of Parallels: (1) Amtos Ultra Thin Set, 1/2"x6" to 1 11/16"x6", .032" Thick; (1) 1/8" Thick, 1/2" to 1 5/8" Wide
70.Bliss Mode C45 OBI Punch Press. Flywheel Type, 45-Ton Capacity, Air Clutch, 12 1/4" Shut Height, 3" Stroke, 3" Slide Adjustment, 29 1/2"x18" Bed with 2 1/4" T-Slotted Bolster Plate, 15 1/2"x10 1/2" Ram with 2" Round Shank Hole, 13 3/4" Opening in Back, Dual Palm Buttons, Bijur Lube System, 3-Phase Motor and Controls, s/n: HP45688. Approx 48"x67"x104"

UM10850-1255

Location: Minneapolis, MN (Not Hoff Warehouse)

71.Set of (4) Mitutoyo No. 368 2-Point Bore Micrometers. .120" to .280" Measuring Range, Ratchet Thimble, (2) Standards, .0001" Divisions, Plastic Case
72.MB Walk-Behind Sweeper. 36" Brush Width, (5) FWD Speeds, 8.5HP Kohler Gasoline Engine
73.Albrecht 1/32" to 1/2" Capacity Keyless Chuck
74.Brown & Sharpe Digit-Hite Plus Digital Height Gage. 0-25" Measuring Range, 110V, s/n: 101080
76.Mitutoyo No. 368-921 Bore Gage Set. .275" to .500" Measuring Range, .0001" Divisions, Ratchet Thimble, 2 7/8" Extension, (2) Standards and Plastic Case
77.Helios 12" Dial Caliper with Wooden Case
78.(2) Vises: (1) Moore Tool No. 865 5 1/2" and (1) Unbranded 2 1/2" Angle Type
79.(2) Mitutoyo 3-Point Bore Micrometers: (1) .800" to 1.000" Range, (1) 1.000" to 1.200" Range, Ratchet Thimbles, .0002" Divisions, Wooden Cases
80.Wysong Model 1652 Pneumatic Shear. 16GA X 52" Capacity in Mild Steel, (2) Front Sheet Supports, s/n: F01-1728. Approx 64"x32"x52"

UM10104-1405

Location: Minneapolis, MN (Not Hoff Warehouse)

81.Gast Model 3080-V128-T337 Vacuum Pump. 2HP 230/460V 3-Phase Motor, s/n: na. 29"x16"x13"
82.Ariens Model 924082 ST824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 047047.
83.Starrett/Webber Gage Block Set with Wooden Case. .050" to 4"
84.Ingersoll Rand Model SSR-EP40SE Screw Type Air Compressor, 153 CFM, Digital Controls, 40-HP Main Motor & Controls, s/n: JE3499U97059, Approx 48" x 52" x 56" and 2200lbs
85.Diatest Split Ball Bore Gage. .1800" to .3750" Measuring Range, Standards in Wooden Case
86.(5) Jacobs Dill Chucks: (1) No. 11N, 0-3/8" Capacity; (2) No. 8-Y2N, 0-1/4" Capacity; (2) No. 1A, 0-1/4" Capacity
87.Brown & Sharpe No. 7030 BesTest Indicator Set. .0005" Divisions with Accessories and Case
88.Suburban Tool 2" Precision Toolmaker's Vise
89.(2) Mitutoyo 3-Point Bore Micrometers: (1) No. 368-208, 1.2-1.4" Measuring Range, .0002" Divisions, Ratchet Thimble, Wooden Case; (1) No. 368-209, 1.4-1.6" Measuring Range, .0002" Divisions, Ratchet Thimble, Wooden Case
90.Schenck Model HS/H20 Balancing Machine. Includes (2) Beds, M480/450 Mectmeter, (4) Additional Supports, Testo Rotor with Belts & Pullies, Schneck MU6 with Motor and Controls
91.(3) Micrometers: (1) Mitutoyo No. 123-125A 0-1" Disc Type with Ratchet Thimble; (1) Mitutoyo No. 123-126A 1-2" Disc Type with Ratchet Thimble; (1) Brown & Sharpe 0-1" Depth Type with Ratchet Thimble
92.Craftsman Model 917.252561 Lawn Tractor. 42" Mower Deck, (6) Forward Speeds, 19HP Briggs & Stratton I/C Gasoline Engine, s/n: 082195C 010109
93.Diatest Split Ball Bore Gage. .380" to .830" Measuring Range, with Wooden Case
94.(7) 3' Deep Teardrop Style Pallet Rack Uprights: (4) 141 1/2" Tall, (3) 120" Tall
95.Assorted Inspection Tools: (1) Meyer Model M-0 Gage Pin Set, .011 to .060 Minus; (1) Moore Tool/Starret Taper Gage Set, .100" to .775" in Plastic Case; (1) JIR Circular Gage Block Set, .101 to 1" in Wooden case
96.Mitutoyo No. 505-628-50 Dial Caliper
97.PYH Model TEDM-1 Demagnetizer. 7"x4 1/2"x3 1/2", 110V
98.(5) Assorted Machinist's Tools: (1) Federal Model C815 Dial Indicator, 1" Range, .001" Divisions; (1) Mitutoyo Model 513-252 Test Indicator, .0005" Divisions; (1) Set of Craftsman Telescoping Gages up to 2 1/8"; (1) Unbranded Indicator Holder with 5/16" Shank, 7" Long with Casae; Assorted Height Gage Accessories and More
99.(2) Sets of Blocks: (1) CEJ Gage Block Set, .1001" to 4" with Wooden Case; (1) Anton Angle Block Set, 1/4 Degree to 30 Degree
100.Clark Model CGP25 Fork Truck. 4150lb Capacity, 189" Lift, Side Shift, Automatic Transmission, Solid Pneumatic Tires, 4 3/4"x60" Forks, LP Powered, 80 3/4" Closed Height, Cage, s/n: P365L-0040-9481FB. Note: Fuel Tank Not Included. Operational but has electrical issues.
101.(5) Command Model B4C6-0016 Collet Style BT40 Tool Holders
102.Ariens Model 924082 824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: na.
103.(5) Command Model B4C4-0016 Collet Style BT40 Tool Holders
104.(6) Command BT40 Tool Holders Including (5) End Mill Type From 1/8" to 5/8" Capacity and (1) Morse Taper Type
105.(2) Command Model B4P2-0001 BT40 Tapping Style Tool Holders and (1) Tap Collet
106.(3) BT40 Tool Holders: (1) Albrecht Hydraulic Type; (2) Nikken Collet Style
107.(10) Command End Mill Style BT40 Tool Holders. 1/4" to 3/4" Capacity
108.(10) Command End Mill Style BT40 Tool Holders. 1/2" to 1 1/4" Capacity
109.(5) Command Model B4C4-0032 Collet Style BT40 Tool Holders
110.Hardinge Model HC, Single Spindle Automatic Chucker, 13" Swing Over Bed, 12" Longitudinal Travel of Turret, 5" Cross Travel of Turret, 8-Position Turret, 5C Collet Capacity, 125 to 3,000 RPM (3-Ranges), 1/4" to 10" IPM Feeds, 1-3/8" Hole Thru Spindle, Threading Attachment, 5C Collet Closer, Coolant, 1-1/2 HP, 1 1/2HP 220V 3-Phase Motor and Controls, s/n: HC-259-A. Approx 70"x35"x66"
111.Gast Model 3080-V128-T337 Vacuum Pump. 2HP 230/460V 3-Phase Motor, s/n: na. 29"x16"x13"
112.Ariens Model 924075 ST724 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires with Chains, 7HP Gasoline Engine with Electric Start, s/n: 001978
113.(5) Collet Style BT40 Tool Holders Including (3) Command Model B4C4-0020, (2) Command Model B4C4-0016 and (1) Paralec for ER16 Collets
114.(7) End Mill Style BT40 Tool Holders from 3/8" to 1"
115.Telescopic Light with Magnifying Lens.
116.Electrovert 132 Solder Pot,500W, 120V,300-1000F Temperature Range. Includes Cutler-Hammer E45 48 Control and Ogden ETR-8090.
117.Sony Magnescale LM20 DRO, w/ Sony Magnascale SR-1711 59"L and 21" L.
118.(3) Indexable Insert Face Mills. Includes: (2) Ingersoll Indexable Insert Face Mills, Approx. 5-3/4" Diameter, 1-1/2" Diameter Arbor, (1) Spabo, Approx. 5-3/4" Diameter, 2" Diameter Arbor.
119.Dial Comparator Model 130, With Mitutoyo Digimatic Indicator. 12"x14"x23"
120.Whitney-Jensen Model 724 Mechanical Shear. 16GA X 42" Capacity in Mild Steel, s/n: 151747. Approx 55"x34"x48"

UM8510-1405

Location: Minneapolis, MN (Not Hoff Warehouse)

121.Metal Frame Cart with Storage Bins and Particle Board Top. 20"x24"x37"
122.Ariens Model 924082 ST824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 037777
123.Bessey Corner Clamp
124.(3) Power Tools: (1) Milwaukee VSR Drill with 3/8" Chuck; (1) Black & Decker Drill with 1/2" Chuck; (1) Jig Saw
125.Reid Model 618H Surface Grinder. Hand Feed Machine. 6"x18" Rated Capacity, 7" Wheel Capacity, 20" Longitudinal Table Travel, 8" Cross Table Travel, 12" Max Spindle Center to Chuck Distance, Brown & Sharpe 6 3/8"x18" Permanent Magnetic Chuck, 3-Phase Motor and Controls, s/n: 12636. Approx 52"x48"x74"
126.(2) Guardian Bottle Jacks: (1) Model 202, 20-Ton, 10" to 16" High; (1) Model 98, 8-Ton, 9 3/4" to 18 1/2" High
127.Hammond Model WS-2 Double End Grinder. 12"x2" Wheel capacity, 1730RPM, 2HP 208V 3-Phase Motor, s/n: 8469. Approx 39"x29"x58"
128.Baldor 40HP 230/460V 3-Phase Motor and (3) Hydraulic Cylinders
129.Assorted Clamps: (3) Thermo Corner Type, (1) Kant Twist, (1) Bar and More
130.Chevalier Model FM-3VK CNC Knee Type Milling Machine, 2-Axis Machine, 10" x 50" Tee Slotted Table, 15-1/2" Cross Travel of Table, 31-1/2" Longitudinal Travel of Table, 5" Quill Travel, Variable Spindle Speeds: 60 to 4,500 RPM, R-8 Spindle Taper, Power Draw Bar, with Proto Trak M2 CNC Control, 3-HP Main Motor & Controls, s/n: KM846591. Approx 72" x 62" x 89" and 2600lbs
131.Assorted Items Including Universal Automatic Drill Head, Electric Motors, Fixtures and More
132.Snapper Model 381451HBVE Rear Engine Rider Lawn Mower. 38" Mower Deck, Hydrostatic Transmission, 14.5HP Briggs & Stratton I/C Gasoline Engine, s/n: 21395437. Note: Roll Release Not Functional
133.(4) Corner Clamps, Approx 3 1/2" Capacity
134.Assorted Wire Wheels and Wire Cup Wheels
135.Trumpf Model TKFB100 Beveller 470 SPM, 110V
136.Western Enterprises Hose Repair Kit. Includes Brass Hardware and Vise Grip Tool in Plastic Case
137.Mitutoyo Micrometer Bore Gage Set of (2) 3-Point with Carbide Tips, Ratchet Thimble Dial with Setting Ring, 5 7/8" Extension, .500" to .800", .0002" Graduations, Plastic Case
138.Large Lot of Retail Shelving. Contents not Included. Disassembled and Palletized.
139.(2) Micrometers: (1) Mitutoyo 0-1" Pin Anvil Type; (1) Lufkin No. 613 Blade Type Depth Micrometer, 0-3" Range, Ratchet Thimble, Wooden Case
140.Walsh Model 45X OBI Punch Press. Flywheel Type, 45-Ton Capacity, Air Clutch, 14 1/2" Shut Height, 4" Stroke, 4" Slide Adjustment, 27"x20" Bed with (2) Bolster Plates, Inch/Single/Continuous, Lube System, Control Pedestal with Dual Palm Buttons, 3-Phase Motor and Controls, s/n: 12322.

DM7353

Location: Minneapolis, MN (Not Hoff Warehouse)

141.(2) Mitutoyo Holtest Series 368 3-Point Internal Micrometers. Interchangable Anvil Capabilities, No. 210 1.600" to 1.800 Range, 1.800 to 2.000 Capacity, .0002" Divisions, Wood Boxes
142.Ariens 2-Stage Snow Blower. 24" Cut, Pneumatic Tires with Chains, Gasoline Engine with Plug-In Electric Start, s/n: 7-10M143911
143.Edsal Metal Cart with Lower Shelf. 30"x16"x28 1/4"
144.(5) Command Model B4C6-0016 Collet Style BT40 Tool Holders
145.(5) Command Model B4C4-0016 Collet Style BT40 Tool Holders
146.(5) Command Model B4C4-0016 Collet Style BT40 Tool Holders
147.(5) Command Model B4C4-0016 Collet Style BT40 Tool Holders
148.(4) Collet Style BT40 Tool Holders: (2) Command Model B4C4-0020, (1) Command Model B4C4-0032 and (1) Parlec B40-20ER4
149.(3) Command Model B4C6-0016 Collet Style BT40 Tool Holders
150.Unknown Mfr. Powered Roll. 18-20 GA X 5' Capacit, 4 3/4" Diameter Top Roll, 3 1/2" Diameter Bottom Roll, Manual Open End, 220V 3-Phase. Approx 100"x30"x50"

UM9185-148

Location: Minneapolis, MN (Not Hoff Warehouse)

151.(10) Command End Mill Style BT40 Tool Holders. 1/4" to 1" Capacity
152.Ariens Model 924082 ST824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 044872
153.(5) ER32 Collet Style BT40 Tool Holders: (4) Techniks and (1) Parlec
154.(5) Command Model B4C4-0016 Collet Style BT40 Tool Holders
155.(5) Command Model B4C4-0016 Collet Style BT40 Tool Holders
156.Herman Stone Granite Surface Plate. 24"x18"x2 1/4"
157.CNC Enhancements Model AutoBar400, Magazine Type Bar Feed Machine, 1/4"- 4" Bar Capacity Range, 60" Bar Capacity Length, 3,500 Lbs Capacity 40" x 60" Material Rack, Controller, 3/4 H.P., 3-Phase Motor And Controls, Serial No. 144. Approx 86"x60"x70"
158.Approx (30) Assorted 1/2-13 T-Slot Hold Down Bolts up to 8 7/8"; Greese Guns; (6) HSS Cutters; Approx (100) Used Carbide Inserts and More
159.(2) 14'x4' Teardrop Style Pallet Rack Uprights
160.Kalamazoo Model H205A Horizontal Band Saw. Automatic Type, 8"x8" Square Capacity, 8" Round Capacity, Variable Blade Speeds: 65" to 400 FPM, 150"x1"x.035" Blade Size, 3HP 440V 3-Phase Motor and Controls, s/n: 77198.

UM7223-133

Location: Minneapolis, MN (Not Hoff Warehouse)

161.Numeridex 3-Tier Carousel with 36-Place Tool Holder Index with Approx (36) SPI No. 74 and Universal Kwick Swithc Tool Holders. Mostly End Mill Type up to 3/4" Capacity, (1) Universal Adjustable Boring Head; (7) Drill Chucks. Approx 65" Tall
162.Ariens Model 924108 ST824LE Snow Blower. 2-Stage, 24" Cut, Cab, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 009600
163.(13) Assorted Universal Engineering Kwick Switch 80-Series Tool Holders. (9) End Mill up to 1 1/4" Capacity; (3) Shell Mill and (1) Jacobs Taper
164.Dapra Corp. 8" Hydraulic machine Vise with Extra Pair of Jaws and Handle. 26 1/2"x11 3/4"x6 1/2"
165.2008 Silvan Vertical Receiver Tank. Approx 1000 Gallon Capacity, MAWP: 150psi @ 450 Degrees F, Approx 157"x54" Includes Custom Cart
166.Acme Transformer Catalog No. T-2-53013-S 1-Phase Transformer. 3KVA, 240/480V Primary, 120/240V Seconday, Mounted on Rolling Platform, Approx 25"x15"x12"
167.XYCom Viewtronix Model SXT1811T Touch Panel. 18" Diagonal, VGA/S-Video/RCA Inputs, 110V, s/n: 2106075. Approx 18 1/2"x15 3/4"x3 5/8"
168.New in Box, SMC MY2HT40G-400H Rodless Cylinder Actuator
169.Emerson Model DXA-455 Positioning Servo Drive. 240V 1-Phase Input, 240V 3-Phase Output, s/n: 95455020
170.Rousselle Model 6W48 Double Crank Adjustable Bed Gap Press. Geared Type, 60-Ton Capacity, 16"x48" Bed, 8"x36" Opening in Bed, 2" Stroke, 7" to 17 1/2" Shut Height, 16"x36" Slide Area, 3" Adjustment of Slide, 50SPM, Inch/Single Controls, 5HP 3-Phase Motor, s/n: 24994. Aprox 70"x53"x100" and 8000lbs

Location: Minneapolis, MN (Not Hoff Warehouse)

171.(25) Omron E2E2-X10B1 Proximity Switches. 12-24VDC, New
172.Ariens Model 924100 ST824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 008548
173.27 1/2"x15 3/4"x4 1/4" Electromagnetic Chuck with Walker Variable Power Control. 115V
174.Marsh Model "S" 3/4" Manual Stencil Machine w/ Oilboard.
175.(14) Klaas Model W Punch Presses with Floor Stands. (5) 4-Ton, (4) 3-Ton, (5) Unknown Tonnage, Likely 3-Ton; 25"x25"x57", 220V 3-Phase.

UM866-125, UM8668-125, UM7831-125, UM7823-125, UM7825-125, UM7825-125, UM7826-125, UM7825-125, UM7825-125, UM7826-125, UM9931-125C, UM9930-125C, UM7615-125, UM9929-125C, UM8663-125, UM7611-125, UM7618

Location: Minneapolis, MN (Not Hoff Warehouse)

176.(2) 1" Diameter Solid Carbide Insert Type Boring Bars: (1) 8 7/8" Long and (1) 6 13/16" Long
177.(6) Assorted Insert Type Boring Bars with Replacible Boring Heads. 1 1/2" Diameter, up to 15 3/8" Long
178.SECO B25-Right Handed No. D116147, 1019 60-Taper Tool Holder. 15" Arbor, 3 1/2" Diameter Down to 1 3/4" with 3/4" Thread
179.5C Collet Angle Grinding Attachment
180.Pexto Model X280A Circle Shear. 18-Ga Capacity in Mild Steel, 24-Ga Capacity in Stainless, 3" Minimum Square Piece to Circle, 48" Maximum Square Piece to Circle, s/n: 44. Approx 55"x24"x51"

UM7235-136

Location: Minneapolis, MN (Not Hoff Warehouse)

181.Hardinge No. 5C Speed Collet Chuck
182.Ariens Model 924082 ST824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 037470
183.Jacobs No. 18N Ball Bearing Super Chuck. 1/8" to 3/4" Capacity with #4MT Shank
184.(6) Assorted Insert Type Replacable Head Type Boring Bars: (4) 2" Diameter up to 18 1/2" Long and (2) 1 3/4" Diameter up to 14" Long
185.Mahr Precision Hole Gage. .400 to .72" with Standard and Wood Case
186.(3) Solid Carbide Boring Bars: (1) 3/4"x3 3/4"; (1) 1/2"x3 5/8" and (1) 3/8"x3 7/16"
187.(16) Assorted Hardinge 2J Collets. 1/16" to 1"
188.Set of (6) Jacobs Rubber Flex Collets. 1/16" to 5/8" and 1 3/8" Diameter
189.Procunier Size 2 High Speed Tapping Attachment. 1/2" Capacity in Brass, 3/8" Capacity in Cast Iron, 5/16" Capacity in Steel, #3MT Shank
190.DoAll Model C-3300 NC Automatic Horizontal Bandsaw. 13"x 13" Rectangle Capacity, 13" Round Capacity, 13.2" Max Vise Opening, 161" x 1-1/4" x .042" Blade Size, 40-360 fpm Blade Speeds, UniOp Digital PLC Controls, 116" x 28" x 33" Outfeed Infeed Conveyor, 6.5 hp, 460 volt, 3-Phase, s/n: 521-01331, Approx. 96" x 86" x 54" Overall and 4,500 lbs.
Location: Blaine, MN
191.Assorted Welder/Wire Feeder Repair Parts
192.Ariens Model 924082 ST824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 005299
193.Assorted Items Including Angle Plates, Welding Supplies, Gas Regulators, Gas Hoses, Wheels & More
194.Jacobs No. 14N Heavy Duty Ball Bearing Drill Chuck. 0-1/2" Capacity, R8 Shank
195.(7) Assorted 1" to 2" Lathe Dogs
196.New ACCEL MPC-2000 CEP-114E CPU Printed Circuit Board
197.(3) SMC Components: (1) MSUB7-90D Rotary Actuator; (1) MSUB20-90S Rotary Actuator and (1) MSQB20RX-F9NL-X65 Rotary Table
198.New in Box, SMC My1C40-500L-Y59B Pneumatic Cylinder
199.(2) Pneumatic Grinders and (1) Abrasive Disc Shaper
200.Grob Model 4V-18 Vertical Band Saw. 18" Throat, 10 1/2" Max Under Guides, 24"x28" Tilting Table, Variable Blade Speeds: 40 to 5000 FPM, Blade Welder Grinder, 3-Phase Motor and Controls, s/n: 1964. Approx 51"x45"x78"
201.Pallet of Assorted Items: Heaters, Motors, Brake Shoes and More
202.Gravely Model 985103 Walk-Behind Sweeper. 48" Brush, High/Low Drive Speeds, Pneumatic Drive Tires, Gasoline Engine, s/n: 000114. Approx 52"x91"x46"
203.Pallet of Assorted Items: Backer Rod, Gear Box and More
204.Propane Cylinder Storage Rack. (12) Cylinder Capacity, Approx 62 1/4"x32 1/2"x51"
205.(2) Pallets of Assorted Valves, Light Fixtures and More
206.(7) SMC Valves Including: (3) VQ1A01NY-5; (3) VQ1200NY-5; and (1) VQ1101NY-5
207.New ACCEL MIO-1616 CEP-121C I/O Printed Circuit Board
208.New, Unticor Oart No. UPT-4X20N-001 "PowerText" Panel. Includes Documentation, Cable and Installation Hardware, s/n: 0252T1086
209.Assorted Components Including: (1) SMC MXS6-10F Cylinder Slide Table; (2) SMC MXP12-15 Cylinder Slide Tables; (1) SMC RB2725 Shock Absorber
210.Wilton Model 7040 Horizontal Band Saw. 10"x10" Square Capacity, 9"x16" Rectangular Capacity, 10" Round Capacity, Variable Blade Speeds: 100 to 350FPM, 1" Blade Width, Coolant, On Wheels, 2HP 220/440V 3-Phase Motor and Controls, s/n: 010321. Approx 77"x36"x48" and 750lbs
211.(15) SMC MXS6-10 Guided Cylinders
212.Ariens Model 924019 Snow Blower. 2-Stage, 32" Cut, Pneumatic Tires, 8HP Gasoline Engine with Plug-In Electric Start, s/n: 10864
213.Walker Turner Radial Drill Press. 28" Max Between Spindle and Column, 17" Max Under Spindle, (4) Belted Speeds, 26"x18" T-Slotted Table, Tilting Head, 3-Phase Motor and Controls, s/n: na. Approx 32"x58"x71"

XXX

Location: Minneapolis, MN (Not Hoff Warehouse)

214.Riveting Macine. 8" Throat, Foot Control, Feeder, Approx 18"x30"x65"

XXX

Location: Minneapolis, MN (Not Hoff Warehouse)

215.Chicago Model 131 Press Brake. 11-Ton Capacity, 4' Bed and Ram, 31" Between Housings, 5 1/2" Throat, Front Operated Manual Back Gage, Manual Bed Adjustment, Manual Clutch with Air Assist, 220V 3-Phase, s/n: na. Approx 48"x28"x73"

UM9141-107

Location: Minneapolis, MN (Not Hoff Warehouse)

216.National Rivet Model 500 Riveter. 10" Throat, Feeder, 110V, Incomplete, s/n: 1706H1. Approx 20"x30"x64"

XXX

Location: Minneapolis, MN (Not Hoff Warehouse)

217.Approx 625lbs Assorted Press Brake Dies
220.Quincy Model QMT25ACA34D Air Compressor. Rotary Screw Type, Approx 100CFM Output, Sound Enclosure, 80-Gallon Horizontal Receiver Tank, 25HP 230/460V 3-Phase Motor, s/n: 83914. Approx 80"x48"x75" When Assembled
221.(8) Pedestal Tables, (7) Approx 36"x47"x29" and (1) Approx 24"x36"x29"
222.Ariens Model 932101 824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 005772
223.Powered Roller. Stand Mounted, 1/2HP 230/440V 3-Phase Motor, Approx 25"x32"x54"

XXX

Location: Minneapolis, MN (Not Hoff Warehouse)

225.Pexto Model U-152 Mechanical Shear. 16GA X 52" Capacity, Back Gage, (2) Front Sheet Supports, 2HP 208-220/440V 3-Phase Motor and Controls, s/n: na. Approx 79"x62"x66"

UM10898-1405

Location: Minneapolis, MN (Not Hoff Warehouse)

227.Bridgeport No. 2 Adjustable Boring Head Kit with R8 Shank, Accessories and Boring Bars in Metal Case
228.Assorted Omiron Vision Components Including (2) F200-P Power Supplies; (2) F300-A22S Camera I/F Units; (1) F300-FM2 MMI Unit; (1) F200-C12E Image Processing Unit; Cableing; F300-KP Consoles
229.Robbins Co. Magn-Sine Model 10 Permanent Magnetic Chuck. 11 1/2"x6"x 4 1/4", s/n: 13415
230.Piranha Model SEP120 Single Station Punch. 120-Ton Capacity, Will Pun 1 1/2" Hole in 1" Mild Steel, 21" Throat, Fence, Assorted Punches & Dies, 10HP 208-230/460V 3-Phase Hydraulic Unit, s/n: SEP120-500. Approx 24"x60"x74" (Machine, 30"x27"x41" (Hydraulic Unit)
231.Pedrzzoli Super Brown Cold Saw. 12" Blade Capacity, Pneumatic/Manual Swivel Vise, .5/3 HP 3-Pase Motor and Controls, s/n: na. Approx 34"x46"x73"

XXX

Location: Minneapolis, MN (Not Hoff Warehouse)

232.Ariens Model 924075 ST724 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires with Chains, 7HP Gasoline Engine with Electric Start, s/n: 004209
233.Chicago Model SB414 Apron Brake. 14GA X 4' Capacity in Mild Steel, s/n: na. Approx 80"x24"x53"

UM10267-104

Location: Minneapolis, MN (Not Hoff Warehouse)

234.Titan Flo-Trac Lug HF-3, High Flotation Tire. 31x15.50-50 .
235.New, Allen-Bradley 855E-24TL5 855E24TLS Light Module
236.(9) SMC MXS6C-10AS Guided Cylinders
237.Assorted Components Including (2) 10' Sections of Roller Chain, Engine Hour Meter, Electrical Components and Moer
238.Assorted Components Including: Foot Control, Photoelectric Switches, Proximity Switches
239.(3) SMC Components: (1) EM6QL25-20 Cylinder Guide; (2) MXQ12-40AS Cylinder Slide Tables
240.W.F. Wells Model B-25-3A3CNC Horizontal Bandsaw with CNC Shuttle Barfeed. 25" H x 40" W x 25.5" Round Capacity, 60-500 SFPM Blade Speed, 35" Work Height, 17" Vise Jaw Height, 15 Gallon Coolant Capacity, 20 Gallon Hydraulic Capacity, 15 hp Blade Drive, 2" x .063" x 26' Blade Size, 230/460 Volt, 3-Phase, s/n: A3103/B0502, Approx. 170" x 102" x 105" and 11,500 lbs.
Location: Hudson, WI

R&R Machinery Movers has inspected this item and is prepared to give rigging quotes. Please Contact Brian at (651) 457-0227 for more information.

241.Assorted Cables and Switches
242.Ariens Model 932101 824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 014890
243.(12) New in Box Omron E3S-AT91 Photoelectric Switches. 10 to 30 VDC,
244.(2) Components: (1) Millipore 047 20 and (1) Matsushita Electric GMX-7MC019B
245.Smart Torq Error-Proofer II, s/n: 071709B
246.New in Box, Festo SLT-20-50-P-A Slide Cylinder with Port Seals
249.Titan Bead Seating Tool, Model CH-5. 5 Gallon ASME Certified Steel Tank .
250.L&J No. 36 OBI Punch Press. Flywheel Type, 36-Ton Capacity, 14" Shut Height, 6" Stroke, 3" Ram Adjustment, Air Clutch, 26 1/2"x15" Bed with 1 3/4" Bolster, 14 1/4" Opening in Back, Dual Palm Buttons, 3-Phase Motor and Controls, s/n: 420348. Approx 38"x54"x102" and 3700lbs
251.Chicago Double Riveter. 9" Throat, Foot Control, Factory Stand, Common Drive Shaft, 110V, Approx 41"x30"x65"

UM10906-129

Location: Minneapolis, MN (Not Hoff Warehouse)

252.Set of (5) Jacobs Rubber Flex Collets. 1/16" to 5/8" with Collet Nose Piece and (1) Collet Approx 1 1/16"
255.(2) Jacobs No. 14N Ball Bearing Super Chucks. 0-1/2" Capacity, #4MT Shanks
256.Victor 6 1/2" Diaemter 3-Jaw Chuck. 1 3/4" Hole, 5 1/8" Diameter Ring Set, Bolt-On Type
257.Snap-On Computer Wheel Balancer, Model WB-700, 805V, 1.5A, Includes Accessories: Lug Adapters, Hub Cones, Rim Width Measuring Tool, Approx. 25lbs. Wheel Weights, and Large Husky Bin w/ Wheels and Retractable Handle.
259.(2) Printed Circuit Boards: (1) Panadac 767A-01 Mag Loader/Unloader Board/PFA 767A-01 #g28E-MD3C20117436-8C; (1) CPU FSC-253-B
260.Summit Model 250M Horizontal Band Saw. Approx 8"x11" Rectangular Capacity, 8" Round Capacity, (4) Blade Speeds: 60 to 220FPM, 1" Blade Width, Infeed Conveyor, 3-Phase Motor and Controls, s/n: 10AFQ5. Approx 70"x70"x45"
261.(4) New, SMC MHKL2-20C1S Parallel Wedge Cam Grippers.
262.Toro Model 38050 (724) Snow Blower. 2-Stage, 24" Cut, Pnematic Tires, 7HP Gasoline Engine with Plug-In Electric Start, s/n: 7002817. Note: Recoil needs repair.
263.Assorted SMC Components Including: (3) MXS6-10ASF Guided Cylinders; (3) MXS6L-10 Guided Cylinders; (1) MGPL16-75 Guided Cylinder and (8) MXS6-10 Guided Cylinders
264.Assorted SMC Components Including: (1) NCDGBN25-0200 Cylinder; (1) CDQ2F40-20DC Cylinder; (1) CDQ2WB20-10DC Cylinder; (1) MGQL40-50-Z73 Cylinder; (1) MHL2-10D-X28 Cylinder; (1) MXS16L-20B Cylinder Slide Table; (1) MGPM25-20 Cylinder; (1) CDUJB8-8DM Cylinder and (1) 12-CXSL6-20-Y59A Cylinder
266.Coats Rim Clamp 5030 Tire Mounting Machine. 32"x41"x62".
267.Titan Flo-Trac Lug Tire on 8 Lug Rim. 38x18-20 .
268.Mighty Mite Manual Bender

UM10920-1025

270.Hydraulic Ironworker. Unknown Make/Model, 10 1/2" Punch Station Throat, Approx 3"x3"x1/4" Angle Station Capacity, 1" Bar Station Capacity, 6"x1/4" Flat Shear Capacity, 3-Phase Motor and Controls, s/n: na. Approx 45"x52"x72"
271.Ralmike's Tool-A-Rama No. 033-11-1 Lathe Boring Accessories with Wooden case
272.Ariens Model 832101 824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 020059. Note: Chute repair needed
273.Procunier Size 2 High Speed Tapping Attachment. 1/2" Capacity in Brass, 3/8" Capacity in Cast Iron, 5/16" Capacity in Steel
275.Gary Model 3350 Gang Slitter. 16GA Capacity with (1) Cut, 48" Max Material Width, (3) Sets of Slitter Blades, 110V, s/n: 48339. Approx 61"x40"x48"

UM10020-141

Location: Minneapolis, MN (Not Hoff Warehouse)

280.Di-Acro No. 18 Power Turret Punch. 18" Throat, 18-Station, Foot Trip, On Wheels, 115/208-230V Motor, s/n: BF-1025. Approx 48"x48"x72"
282.Ariens Model 924110 ST824DLE Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 001671. Note: Chute repair needed
284.Chicago Rivet & Machine Type 913 Foot Press. 5" Throat, Assorted Punches, s/n: 976. Approx 16"x20"x52"

UM10926-1235

Location: Minneapolis, MN (Not Hoff Warehouse)

285.Chicago Riveter. 8 1/2" Throat, Feeder, Pedestal Stand, 110V, Approx 28"x67.

UM10905-1295

Location: Minneapolis, MN (Not Hoff Warehouse)

286.Ingersoll Rand Model 7765-B Double End Bench Grinder with Pedestal. 1/4HP 3600 RPM Motor, 110V

XXX

Location: Minneapolis, MN (Not Hoff Warehouse)

290.Sunnen Model MBB-1600 Precision Honing Machine, .060-6.5" Capacity, 6" Length, 1/2 hp, 115/230 volt, s/n: 42793, 33" x 40" x 64" Overall. Comes with 34" x 28" x 64" Cabinet Full of Assorted Tooling as Shown.
291.Emil Wohlehaupter Adjustable Boring Head with #3 MT Shank. 3/4" Diameter Hole, with Accessories, Wooden Case
292.Ariens Model 832101 824 Snow Blower. 2-Stage, 24" Cut, Pneumatic Tires, Tecumseh 8HP Gasoline Engine with Plug-In Electric Start, s/n: 005770. Note: No Chute, No Light
293.(5) Assorted Hardinge Chucker Lathe Precision Threading Lead Screws with Followers. Metric Pitches: 1.5, 12, 14, 16 & 20mm
294.(7) Assorted Hardinge Chucker Lathe Precision Threading Lead Screws with Followers. Metric Pitches: 18, 24, 28, 32, 40, 48, 56mm
301.No. 1 Arbor Pres. 4" Throat, 5 1/2" Max Under Ram, (3) Throat Plates.

UM10914-1195

302.Miller Model Dialarc 250 Constant Current AC/DC Welding Power Source. 250A 30V Rated Output @ 30% Duty Cycle, Stick Clamp, Ground Clamp, On Wheels, 200/230/460V 1-Phase, s/n: JD674098. Approx 20"X34"x36"
303.(2) Rotary Model Rs859S Trailer Stands. 8-Ton Capacity, 51" to 90" Height
304.(3) Collapsable Wire Crates
307.Assortment of Mostly Motorcraft and For Auto Parts. Including Wheel Cylinders, Switches, Spring Assemblies, and MoreSee Pictures for Part Numbers.
308.Approx. (5) Seat Belt Sets, and Automotive Door Trim.
309.(6) Kleer-flo, Full-Flow Filter Cartridges for Parts Washer. Part No. F-100.
311.PIG Item# RNG202 Absorbant Wringer. 12" Rolls, Hand Crank, Approx 26"x30"x30"
316.Aro Spot Welder. 20KVA, 9" Throat, 440V 1-Phase
317.Radiodetection Limited Model PDL2FA1 Utility Locator
322.Miller Model Deltaweld 650 Welder. 44 volts, 650 amps @ 100% Duty Cycle, 60 Max OCV, 203/460 volt, 3-Phase, Comes with 24V Wire Feeder, Cart Mounted, s/n: JB544209, Approx. 27" x 52"x 50".
323.(2) Tanaka Gasoline Powered Drills with 1/2" Capacity Chucks: (1) 262R and (1) 262L
324.Assorted Items: Heaters, Hoses, Chainsaw Case, Wager Jug
325.Assorted Work Lights Including (1) LED Capable of Cordless Operation
326.(18) Assorted U-Joints. See Pictures for Part Numbers.
328.(18) Assorted Engine Block and Lower Radiator Hose Heaters. Assorted Sizes.
329.(10) Sets Spark Plug Wires, (2) Pkgs. Spark Plug Boots. 4,6, and 8 Cyl.
331.Daiken NDR Model NDR151-1022-30 Rotor Pak. 6.9MPa Max Pressure, Approx 32"x15"x15"
332.NDJ Model NDJ159-152-20 Hydraulic Unit. 1.5kW, 25 l/m Flow Rate, 35 kgf/cm2 Max Pressure, Approx 14"x14"x24; 2.5Gal Pressure Tank
333.Chance Model 570 Capstan Hoist. 750lb Capacity, 8.2 Cubic Inch Engine, s/n: 191101
334.Large Assortment of Auto Parts, Mostly Brake Parts, Including Spring/Hardware Kits, Wheel Cylinders, and Swivels. Also Includes Various Case Parts.
335.Large Assortment of Automotive Parts. Including: Flashers, Relays, Switches, and More.
336.Automotive Exhaust System Parts. Includes: (22) Muffler/Exhaust Clamps, Sizes: 1-1/8" to 3-1/2", Hangers, Brackets, and More.
338.(4) AC Delco Windshield Wiper Motors, (1) Wiper Module.
339.Miller model CP-200 CP DC Welder with Millermatic 10A Wire Feeder and Miller S-52E Feeder, 200 amps, 28 volt @ 100% Duty Cycle, 39 Max OCV, 230/460 volt, 3-Phase, s/n: 71564169, Mounted on Bernard Boom Cart, 46" x 76" x 89" Overall.
341.Hyster Model S100XL LP Powered Forklift. 9800 lb Rated Capacity, Sideshift, 59"x 6" Forks, 2-Stage Mast, s/n: D004V07201P. (Note: Wheel Assembly was removed for Use on Another Lift. Forklift Runs but is Sold AS SHOWN in Photos)
Location: Blaine, MN
342.Smokemaster Electrostatic Type Air Cleaner. 380V 3-Phase, Approx 30"x31"x31"
343.Assorted Thermostats and Gaskets.
344.(25) Assorted Automotive Caps. Mostly Fuel and Oil.
345.Misc. Surplus Auto and Tractor Parts. See Photos.
346.Large Lot of Misc. Auto and Truck Parts. GM Hose Assemblies, Lift Gate Cables, International Switchs, Winterfronts, and more.
348.Leland Gifford Sliding Head Drill Press. 10" Throat, 27" Max Under Spindle, 330"x20" Plain Production Table with 46"x26"x3/4" Plate, Variable Spindle Speeds: 450 to 1800 RPM, #2 MT Spindle Taper, 220V 3-Phase Motor and Controls, s/n: na. Approx 46"x48"x78"
349.(2) Machine Parts: (1) 32" Wide Timesaver Roller; (1) Hyneumatic Automatic Drilling Unit
351.Cushman Type 12 Volt Shop Cart. 30" x 84" x 42" Overall.
Location: Blaine, MN
352.Double End Wire Wheel Machine. 14" Wheel Capacity, Heavy Duty Stand, 220/440V 3-Phase Motor. Approx 46"x41"x53"
353.Presto Model AX40-4856 Lift Table. 4000lb Capacity, Pneumatic Type, 48"x56" Table Top with 48" Diameter Lazy Susan, Control Pedestal, 9 1/2" Collapsed Height, s/n: 126475 04.
354.Reliable Crane Model USP-2-3 Bridge Crane. 2-Ton Capacity, Approx 10' 8" Span, Underslung, Includes Cart
355.(2) Hydraulic Power Units: (1) With 20HP 230/460V 3-Phase Motor, 39"x34"x52"; (1) With Unknown HP Motor, Likely 3-Phase, Approx 52"x23"x60"
356.Electric Box Stapler. 10" Throat, Foot Switch, 110V
357.Hydraulic Power Unit with 1.5kW 200V 3-Phase Motor. Approx 25"X18"x31"
358.Bernard Boom Cart with Lincoln LN-22 Squirt Welder and Miller S-22A Wire Feeder. 32" x 49" x 100" Overall.
359.American Lincoln Tech Model 576-506 Floor Sweeper. Lp Powered, 1940/8 Hours, s/n: 630757 (New in 2002), 48" x 92" x 50" Overall.
Location: Blaine, MN
361.Tennant Model 220 Power Sweeper. Ride-On Type, 36" main Broom, Side Broom, Compressed Natural Gas
362.Cuda Model H20 Parts Washer. Carousel Type, 24" Basket Diameter, 14 1/2" Under Lower Arm, 30" Under Upper Arm, Heater, Skimmer, Timer, 230V 1-Phase, s/n: H20-3862.
363.Dedtru Centerless Grinding Attachment with Surface Grinder. 4" Max Part Length, Dedtru Power Supply, Approx 42"x42"X66"
364.Wissota Model E7XF 7" Double End Grinder on Pedestal Stand, 1/2 hp, 3450 rpm, 115 volt, 1-Phase, 30" x 20" x 52"
365.Woodward Air Drive H-Frame Hydraulic Press. Estimated 20-Ton Capacity, 26" Between Uprights, 26" Max Under Ram, 6" between Bed Rails, 1HP 115/230V Motor, Approx 39"x31"x85"
366.(2) Items: (1) 36"x36"x6" Granite Surface Plate with Stand 35" High; (1) Coolant Tank and Pump, 20"x12"x10"
367.(13) General Motors Door Hinges. Assorted Part Numbers, Shown In Images.
368.Assorted Automotive Ignition Parts, Including Distributor Caps, Ignition Coils, and Coil Resistors.
369.(8) Automotive Gas Shock Absorbers, Mostly General Motors.
371.(2) Chrome Mopar Fuel Caps, NOS. P/N 2585387 & 3906653
372.Approx. (100) Automotive Spark Plugs. Autolite, AC Delco, and Motorcraft.
373.Assorted Automotive Parts, Including (2) GM Control HSG ASM Pkgs, LH For 89-90 Chevy K10, Electric Fuel Pumps and strainers, Battery Cables, Delco Turn Signal Switch, and more
374.Thermotron Model S-H Minimax Environmental Chamber. 20" x 20" x 20" Chamber dimensions, 230 volt, 3-Phase, s/n: 25-1029, Approx. 35" x 36" x 80".
375.Cincinnati No. 2M Plain Horizontal Milling Machine. 10 1/2"x52 1/2" T-Slotted Table, 25" Longitudinal Table Travel, 10" Cross Table Travel, 18" Vertical Knee Adjustment, (12) Spindle Speeds: 20 to 419 RPM, (12) Feeds: 1/2 to 20 IPM, NMTB Spindle Taper, Vertical Head Attachment, Overarm Support, 6" Vise with Swivel Base, 3-Phase Motor and Controls, s/n: na. Approx 63"x67"x64" and 3500lbs
376.Rockwell Model NA 7" Double End Grinder on Pedestal Stand. Lighted Eye Shields, 22" x 16" x 48"
377.Miller Model CP-250TS MIG Welder with Millermatic 10A Wire Feeder, Cart Mounted, s/n: HK328475, 480 volt, 3-Phase, 34" x 56" x 64".
378.RTI Model TC2670 Refrigerant Management System, R-22 Type, 130/261 PSIG, 115 volt, 28" x 32" x 43".
379.Aamco Model Uknown Brake Lathe with No. 6900 Twin Facing Tool and Assorted Tooling. 115 volt, 1-Phase, 56" x 42" x 58".
381.Coats Model 40-40S Tire Mounting Machine with Assorted tooling, s/n: 40-40S-11667, Approx. 68" x 22" x 50".
382.Van Norman Model 304H Brake Drum Lathe. 1/2 hp, 208-220/440 volt, 3-Phase, s/n: 3945-870, Approx. 64"x 40" x 50".
383.Bostitch Model FC95 "Golden" Belt Box Bottomer. s/n: 4749, Approx. 48" x 16" x 52".
384.Racine Hydraulic Power Unit with 15 hp, 230/460 volt, 3-Phase Motor, Thermal Transfer Products Cooling Unit and More. 60" x 27" x 16" Tank, 60" x 33" x 62" Overall.
385.72" Run of Dormer 4100 Series Belt Conveyor. 12" Belt Width, 36" Height.
386.Chicago Power Tools Model AI-14 Drill Press. 6-1/2" Throat, 12" Table Diameter, 440-2350 rpm, 3/4 hp, 208/230 volt, 3-Phase, 18" x 24" x 67".
387.(3) Items: (1) Craftsman Horizontal Band Saw, Approx 4"x4" Capacity, 110V; (2) Motorized Stock Reels
388.Numerex Model 2428-18 CMM, 24" x 28" x 18" Measuring Envelope, Renishaw PH1 Probe, 45" x 40" x 6" Granite Base with 5/16" Drilled and tapped Holes, 54" x 55" x 84" Overall.
389.(10) ProFax 25'x1/16" Wire Conduits
391.Assortment of AC Delco and GM Switches, relays, and more.
392.(2)Marmon-Herrington Double cardan steering joint P/N MT221147, (1) Ford Radiator Tank P/N E2HZ-8A080-B, (1) Rockwell AY-BKT-CHMBR (AIR BRAKE - CHAMBER BRACKET) D27 3299 Q 6257.
393.(3) Alternators, (3) Starters, (1) Water Pump, (1) GM Air Injection Pump Assy.
394.(3) Motor Mounts (3) CUSHION, Radiator.
395.(1) AC Delco Fuel Pump/Sending Unit, (2) GM Lamp Assemblies (1) Case Lamp.
396.(2) GM Tensioners, (1) GM Pully, (2) Idler Pully/Tensioners, (1) International Water Pump.
397.GM 6 Bolt Hub assembly, NationalHub Assembly, GM 6 Bolt Center Cap and (5) Lug Caps.
398.(2) GM Exhaust Manifolds for Eight Cyl. Engine, (2) GM Exhaust Gaskets, (1) Rockwell Camshaft, and (1) GM Hinge Kit.
399.(7) Assorted Motors. Mostly AC Delco Blower/heater Motors.
416.Tweco Auto Gun Welding Gun Head
418.Approx 800lbs of Assorted Welding Rod
419.(8) Assorted Auto Handles, Mostly GM. (4) GM Windsheild Washer Arms.
422.LIFTek L25 Series Radio Anti-Two Block System.
424.Assorted Welding Wire and More
425.Approx 1000lb Assorted Welding Rod
434.Miller Model Ramrod Welding Power Source. 200A 28V Rated Output @ 40% Duty Cycle, 80 Max OCV, 250 Max Amperage, On Wheels, 230/460V 3-Phase, s/n: JE761834. Approx 28"x33"x38"
435.Esab Model DC600 CPT Constant Potential Welder, 600 amps, 40 volts @ 100% Duty Cycle, 45 Max OCV, Esab WFU 50 Wire Feeder, Cart Mounted, 230/460 volt, 3-Phase, s/n: H2911-784-211, 26" x 50" x 60".
436.New/Lightly Used TIG Welding Foot Control
441.Lincoln Idealarc CV-300 DC Arc Welding Power Source. 400 amps, 36 volts @ 60% Duty Cycle. 208-230/460 Volt, 3-Phase, s/n: U1940801028, Comes with Lincoln LN-7 Wire Feeder, 24" x 44"x 40".
449.Kaufman Single Spindle Tapping Machine. 9 1/2" Throat, 3/4" Tapping Capacity, 21 1/2"x15 3/4" T-Slotted Table, (2) Spindle Speeds: 375/500 RPM, 1HP 220/440V 3-Phase Motor and Controls, s/n: 5126. Approx 32"x48"x72"
451.Helmel Model Checkmaster 112-104 Coordinate Measuring Machine. Approx 12"x18"x8" Measuring Envelope, Renishaw TP-ES Probe, Cabinet Base, s/n: 99-76. Approx 41"x32"x72"
452.Miller Deltaweld 300 CV/DC Welding Power Source, 32 volts, 300 amps @ 100% Duty Cycle, 40 Max OCV, with Miller S-540 Wire Feeder, Cart Mounted, 200-230/460 volt, 3-Phase, s/n: KB134169, Approx. 24" x 45" x 50".
453.Dumore Duplex Grinder with Assorted Bits and Wooden Case
454.(2) Items: (1) Chatillon 10KG x 100g Force Gage with Plastic Case; Assorted Gage Blocks with Wooden Case
455.Cole Parmer Model 8520 Digi-Sense Thermistor Thermometer. -30 to 100C Measuring Range with Probes & Plastic Case. 110V
456.Cleco Balance Arm. Approx 30" Long, 31" Column Height
457.(2) Tools: (1) Flam 600 RPM Pneumatic Driver; (1) Tapping Head with 1/2" Straight Shank
458.(2) Wilkerson Pneumatic Filter Regulators and (1) Watts Pneumatic Filter
459.4" Quick Acting Drill Press Vise
461.Miller Model CP-250TS MIG Welder with Millermatic 10A Wire Feeder, Cart Mounted, s/n: HK328474, 480 volt, 3-Phase, 34" x 56" x 64".
462.Rockwell Model A Pneumatic Drill Head with 1/32" to 1/2" Capacity Chuck. 450 RPM
463.Western Model 4-12BM Sliding Head Drill Press. 12" Throat, 26" Max Under Spindle, 24"x22" Table wth T-Slotted Plate, (18) Speeds: 75 to 1425 RPM, #4MT Spindle Taper, 3-Phase Motor and Controls, s/n: na. Approx 32"x50"x98"
468.Miller Legend CC AC/DC Welding Power Supply/Generator, AC: 25 volts, 225 amps, @ 100% Duty Cycle, 80 Max OCV, DC: 25 volts, 200 amps @ 100% Duty Cycle, 72 Max OCV, 5 KW, 120/240 volt, 1-Phase, s/n: KF988829, Approx. 19" x 48" x 35".
474.Miller model CP200 Welder, 20 volts, 200 Amps @ 100% Duty Cycle, 39 Max OCV, with Miller Wire Feeder, Cart Mounted, 208/230 volt, 3-Phase, s/n: HD661458, Approx. 14" x 44" x 46".
475.Miller Dialarc 250-AC/DC Arc Welding Power Source. (AC: 250 amps, 30 volts @ 30% Duty Cycle, 75 Max OCV) (DC: 260 amps, 30 Volts @ 30% Duty Cycle, 76 Max OCV) 208-230/460 volt, 3-Phase, s/n: HF873849, Approx. 21" x 29" x 27".
484.Delco Cleaning Systems Steam Cleaner/Pressure Washer, 57" x 28" x 38".
486.Lincoln Idealarc CV-300 DC Arc Welding Power Source. 400 amps, 36 volts @ 60% Duty Cycle. 208-230/460 Volt, 3-Phase, s/n: U1940801029, 24" x 44"x 40".
491.Torit Dust Collector, 23" x 26" x 35".
499.Torit Model 54 Dust Collector. 220/440 volt, 3-Phase, 1/2 hp, s/n: H2517, 22" x 20" x 27".