Hoff Online Auctions
Liberty Machining, LLC - Tuesday, March 27, 2018 Tuesday, April 3, 2018 - Starting at 10:00am Central

Item Description
1.Bridgeport Series I Vertical Milling Machine, 9" x 42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 16" Vertical Knee Adjustment, R8 Spindle Taper, Variable Spindle Speeds: 60 to 4,200 RPM, One Shot Lube, 2 HP, Three Phase Motor and Controls, s/n 236598, Approx: 2,000 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

2.(11) R8 Collets with "The Swinger" Collet Holder. Sizes as Shown.
3.Equipto Work Bench with (4) Drawers and a (1) Door Cabinet. 72" x 29-1/2" x 1-3/4" Butcher Block Top. 36" Height. (Contents NOT Included)
3.1.Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.
3.2.Please click on this lot for Preview Times at the Liberty Machining Online Auction.
3.3.Please click on this lot for Rigging Information at the Liberty Machining Online Auction.
3.4.UPS Shipping Available for small items Click here for more information.
3.5.This auction features EXTENDED BIDDING! View this lot to learn more.
3.6.This auction STARTS TO CLOSE at 10:00 AM Central Time at a rate of 3 lots per minute. Click this lot to learn more.
3.7.How much time is left?
3.8.Click on This Lot For Important Removal Information at the Liberty Machining Online Auction.
4.Kennametal Model SS150DA Straight Shank Collet Holder, 1-1/2" Shank with (10) Assorted DA Collets
5.Winter Model 141511 Thread Roll Attachment with Adapter Plate for Acme AG-6 1-3/8" Screw Machine
6.Hardinge Model HV-4 5C Collet Snap Head
7.(2) Kennametal Type Straight Shank Collet Holders with 2" Diameter Shanks for DA400 Series Collets
8.Approx (20) Assorted DA180 Series Collets
9.Kennametal Model SS062DA Straight Shank Collets Holder on 5/8" Diameter Shank with (7) Assorted Collets
10.Kurt Anglock 6" Precision Machine Vise with Swivel Base.
11.Lift-Rite 5000 lb Capacity Pallet Jack. 48" x 7" Forks with 6-1/2" Between.
12.500 lb Capacity Floor Mount Jib Crane, 360 Degree Rotation, Approx. 6" Column Diameter, Approx. 7' Reach, 119" Under Top Arm, CM Lodestar 1/4 Ton Electric Chain Hoist, Pendant Control, 440 volt, 3-Phase.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

13.(13) Assorted Slater Tools Rotary Broaching Bits on 1/2" Shank with Slater Rotary Broach Tool Holder
14.Assorted Brown & Sharpe Turret Tooling, Including: (1) Box Tool on 3/4" Shank, (1) Box Tool on 5/8" Shank and (1) Knurling Tool on 5/8" Shank
15.Acme Gridley Model AG-6 Multiple Spindle Automatic Screw Machine, 1-3/8" Capacity, 6-Spindles, Collet Capacities: 1-3/8" Round, 31/32" Square and 1-3/16" Hexagon, 5" Standard Stock Feed, Flat End Slide, Spindle Speeds: 326 to 3,152 RPM, Air Clutches, Threading & High Speed Reaming, Pick Off & Back Finishing, Universal Chip Conveyor, Stock Reel & Stand, 30 HP, Three Phase Motor and Controls, s/n 1386047, Approx: 22,000 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

Click on lot for machine video.

16.5" Benchtop Vise with Pipe Jaws and Swivel Base.
17.(2) Brookfield Straight Shank Tool Holders with 1/16" to 3/4" Capacity on 1" Diameter Shank with 2" Diameter Bushings
18.Equipto Work Bench with (4) Drawers and a (1) Door Cabinet. 72" x 29-1/2" x 1-3/4" Butcher Block Top. 36" Height. (Contents NOT Included)
19.(2) Kennametal Model SS150DA Straight Shank Collet Holders, 1-1/2" Diameter Shanks with (2) DA180 Series Collets
20.(2) Kennametal Type Floating Straight Shank Collet Holders, 2" Diameter Shank for DA180 Series Collets
21.5/16" Geometric Threading Head on 5/8" Shank with (2) Sets of 5/16" Thread Chasers.
22.Criterion Model S-1 Adjustable boring Head on 5/8" Shank.
23.Hundreds Of Assorted Guhring HSS Drill Bits. 3/8", 7.100, 7.140, 6.530 and More.
24.Hundreds of Assorted HSS Taps. Sizes Include: 9/16-28NS, 7/16-28NEF, 3/8-32NEF and More.
25.Scherr-Tumico Model 22-1500 Optical Comparator, 14-1/2" Screen Diameter, 115 Volt, 1-Phase, 28" x 29" x 64".

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

26.(2) Rohm R8-12 Drill Chucks. 1/64" to 3/8" Capacity.
27.Jacobs No. 14N Drill Chuck on R8 Shank. 0-1/2".
28.(14) NuLine 5C Collets.
29.(2) Erickson Type Straight Shank Collet Holders, 2" Diameter Shank with (2) DA400 Series Collets
30.Acme Gridley Model RA-6 Automatic Screw Machine, 1" Capacity, 6-Spindles, Collet Capacities: 1" Round, 45/64" Square, and 55/64" Hexagon, 5" Maximum Stock Feed Length, 5" Maximum Turning Length, Flat End Slide, Spindle Speeds: 289 to 2,383 RPM, 4th Position Threading, Pick Off & Back Finishing, Universal Chip Conveyor, Stock Reel & Stand, 15 HP, Three Phase Motor and Controls, s/n A-23696, Approx: 11,300 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

Click on lot for machine video.

31.Approx (15) Assorted DA400 Series Collets
32.Approx (14) Assorted DA400 Series Collets
33.Adjustable Steel Shop Shelf with 5-Adjustable Shelves, Approx: 36" x 12" x 60", Contents Not Included
34.Adjustable Steel Shop Shelf with 3-Adjustable Shelves, Approx: 36" x 18" x 48-1/2", Contents Not Included
35.Fairbanks Model No. 25 Floor Scale, 32" x 36" x 41".
36.Group of Carbide Tipped Tool Bits. Mostly 1/2", 5/8" and 3/4".
37.Adjustable Steel Shop Shelf with 3-Adjustable Shelves, Approx: 36" x 18" x 48-1/2", Contents Not Included
38.(2) Sections of Steel Shelving, Approx: 72" x 12" x 61-1/2", Contents Not Included
39.Federal 10" Indicator Stand.
40.(2) Assorted 5C Collet Fixtures
41.(12) 5C Collets (sizes as Shown) and (2) Emergency Collets (As IS)
42.Set of (6) Hardinge Model S20 Master Collets for Acme RA-6 1" Screw Machine
43.(8) Assorted Hardinge & Hardinge Type Pick-Off Collets for Acme RA-6 1" Screw Machine
44.(7) Assorted Hardinge & Hardinge Type Pick-Off Collets for Acme RA-6 1" Screw Machine
45.MSO Type Rotary Index Machine, 3-Station Type, Bellows-Scholin 20" Indexing Table with (6) 5C Collet Fixtures, Including the Following Stations: (1) Tap Station with Procunier Size 3 Style AL Tapping Attachment, 1/2" Tap Capacity in Steel, (1) Drilling Station with HyPneuMat Model DO3500 11625-B Drill Spindle and (1) Oppsoing Milling Station with Pnematic Feed, with Extra HyPneuMat Spindle and Mount, Three Phase, s/n na.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

46.Assorted HSS Endmills and Drill Bits.
47.Harvard Model 8 Kidney Type Filtration System, 80 Max PSI Operating Pressure, 5 hp, s/n: 1727, Approx. 24" x 30" x 45".
48.Hundreds of Assorted HSS Drill Bits. Sizes up to 10.2mm.
49.(9) Assorted RPM/Feed Gears for Acme RA-6 1", Including: 54/26, 48/32, 46/34, 52/28 and (1) 48T
50.Winter Model 162-SA Thread Roll Attachment with Adapter Plate for Acme AG-6 1-3/8" Screw Machine
51.5/16" Geometric Threading Head on 5/8" Shank with (2) Sets of 5/16" Thread Chasers.
52.(30) Assorted Carbide Tipped Tool Bits. Mostly 5/8" and 3/4"
53.Assorted HSS Drill Bits, Mostly Reduced Shank. Sizes up to 7/8".
54.(2) Aro Model 8255-28 Self Feed Tools. 2800 rpm, 1-1/4" Shank.
55.Equipto Work Bench with (4) Drawers and a (1) Door Cabinet. 72" x 29-1/2" x 1-3/4" Butcher Block Top. 36" Height. (Contents NOT Included)
56.Set of (6) Hardinge .568" Collets for Acme RA-6 1" Screw Machine
57.Mist Collection System.
58.(2) Assorted Flat Form Toolholders for Acme RA-6 1", Including: (1) FF-11 1st Position and (1) No. 3174
59.(4) Assorted Clutches and Chain for Acme RA-6 1" Screw Machine
60.Acme Gridley Model AG-6 Multiple Spindle Automatic Screw Machine, 1-3/8" Capacity, 6-Spindles, Collet Capacities: 1-3/8" Round, 31/32" Square and 1-3/16" Hexagon, 5" Standard Stock Feed, Flat End Slide, Spindle Speeds: 326 to 3,152 RPM, Air Clutches, Threading & High Speed Reaming, Pick Off & Back Finishing, Universal Chip Conveyor, Stock Reel & Stand, 30 HP, Three Phase Motor and Controls, s/n 1386040, Approx: 22,000 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

Click on lot for machine video.

61.Group of Assorted Carbide tipped Tool Bits. Mostly 3/4" and 5/8".
62.Hundreds of Assorted HSS Twist Drills, Mostly Guhring, Sizes up to 7/16".
63.Cantilever Type Stoc Rack, 12" Arms, 34" x 84" x 72" Overall.
64.Cam Drum for Acme RA-6 1", 5/16" Late Pick-Off and Back Finish Cam
65.(2) Assorted Tools for Acme RA-6 1", Including: (1) FFD-7 Double Deck Flat Form Toolholder for 6th Position and (1) ZT-715420 5th Position Cut-Off Toolholder
66.(3) Assorted Toolholders for Acme RA-6 1", Including: (1) 2nd Position Adapter Plate for Circular Stamp Tool, (1) FF-3 Flat Form Tool with Square Shank Insert Turning Tool and (1) Collet Holder on 1" Dimaeter Shank
67.Set of (12) Hardinge Model S10 & B6 5/16" Round Collet & Pusher Pads for Acme RA-6 1"
68.Pennsylvania Scale Co. Model C-200-9 Scale, 50 lb Capacity, s/n: 80728, Approx. 34" x 22"x 25".
69.Set of (12) Hardinge Model S10 & B6 5/16" Hex Collet & Pusher Pads for Acme RA-6 1"
70.Double Deck Flat Form Tool Holder Model FFD-5 for Acme RA-6 1", 1st Position
71.Set of (12) Hardinge Model S10 & B6 3/8" Round Collet & Pusher Pads for Acme RA-6 1"
72.2-Sets of (12) Hardinge Model S10 & B6 7/16" Round and 7/16" Hex Collet & Pusher Pads for Acme RA-6 1"
73.(12) 5C Collets (sizes as Shown) and (2) Emergency Collets (As IS)
74.2-Sets of (12) Hardinge Model S10 & B6 1/2" Round and 1/2" Hex Collet & Pusher Pads for Acme RA-6 1"
75.K.O. Lee Model S714 Surface Grinder, 6" x 12" Rated Capacity, 14" Longitudinal Table Travel, 7-1/8" Cross Table Travel, 16" Maximum From Table Top to Spindle Centerline, 8" x 3/4" x 1-1/4" Standard Wheel Size, 6" x 12" Permanent Magnetic Chuck, Chuck Mount Wheel Dresser, Coolant Tank, Approx 1 HP, Three Phase Motor and Controls, s/n 10887-567, Approx 1,300 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

76.2-Sets of (12) Hardinge Model S10 & B6 5/8" Round and 5/8" Hex Collet & Pusher Pads for Acme RA-6 1"
77.(4) Assorted Flat End Slide Tools for Acme AG-6 1-3/8", Including: (2) Knee Turners and (2) Custom Tools
78.(2) Back Chamfer Tool for Acme AG-6 1-3/8" Screw Machine
79.(2) Adjustable Dovetail Tool Holders for Acme AG-6 1-3/8", Including: (1) ZG-16692 1-1/4" Dovetail and (1) ZG-16716 5/8" Dovetail, Both with ZG-16697 Bases
80.(2) Assorted Toolholders for Acme AG-6 1-3/8", Including: (1) ZG-16692 1-1/4" Adjustable Dovetail Toolholder with ZG-16715 Base and (1) ZG-145640 Flat Form Toolholder
81.Set of (6) Namco A14664 Master Collets and Pushers for Acme AG-6 1-3/8"
82.Set of (6) Namco 1-3/8" Round Collets & Pushers for Acme AG-6 1-3/8"
83.Slater Tools Model BRA-1121 Broaching Attachment for Acme AG-6 1-3/8" Screw Machine with Hardware and Drive Spindle
84.(2) Assorted 5/8" Adjustable Dovetail Toolhodlers for Acme AG-6 1-3/8" Screw Machine, Including: (1) 4th Position and (1) 6th Position
85.RPM Reducer Pulley Model AG-14734 for Acme AG-6 1-3/8" Screw Machine
86.Set of (6) Namco 1" Round Collets & Pushers for Acme AG-6 1-3/8"
87.(2) Sets of Turret Cams for Acme AG-6 1-3/8", Including: (1) 3/8" and (1) 1"
88.(2) Sets of Turret Cams for Acme AG-6 1-3/8", Including: (1) 1/2" and (1) 11/16"
89.(2) Sets of Turret Cams for Acme AG-6 1-3/8", Including: (1) 5/8" and (1) 3/16"
90.Brown & Sharpe Model 00 Single Spindle Automatic Screw Machine, 1/2" Capacity in Rounds, 200 to 6,000 RPM, 6-Position Turret with 5/8" Holes, Front & Rear Slides, Vertical Slide, Coolant System, Stock Tube & Stand, Three Phase Motor and Controls, s/n 542-00-6512, Approx: 2,200 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

Click on lot for machine video.

91.5/8" Adjustable Dovetail Tool Holder for 1st Position on Acme AG-6 1-3/8" Screw Machine
92.Set of (6) Hardinge .317" Collets for Acme AG-6 1-3/8" Screw Machine
93.Assorted Collet and Pusher Pads for Acme RA-6 1", Including: (6) 1" Collet Pads, (6) 3/4" Round Collet Pads, (6) 29/32" Round Collet Pads and Set of (12) Hardinge S10 & B6 25/32" Round Collet & Pusher Pads
94.(12) Hardinge 1" Feed Fingers for Acme RA-6 1" Screw Machine
95.(5) Hardinge Model S15 Master Collets for Acme AG-6 1-3/8" Screw Machine
96.(6) Assorted Pick-Off Collets for Acme AG-6 1-3/8" including: 1/4", 5/16", 3/8", 7/16", 9/16" and 5/8"
97.(7) Assorted Pick-Off Collets for Acme AG-6 1-3/8" including: 3/4", 31/64", 49/64", 11/16", 3/8", 7/8" and 15/16"
98.(8) Assorted Pick-Off Collets for Acme AG-6 1-3/8" including: 1", 1.015", .862", .703", .472", .5937" and (2) Others
99.Set of (6) Namco .375" Round Collets for Acme AG-6 1-3/8" Screw Machine
100.Hyster Space Saver Model OT-20 LP Powered Lift Truck, 36"x 4" Forks, Pneumatic Tires, s/n: 42181.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

101.Poly-Choke Model PC-101 Tap and Drill Sharpening Fixture.
102.Diamond Tipped Wheel Dresser.
103.5C Collet Fixture
104.Set of (6) Namco 5/8" Round Collets for Acme AG-6 1-3/8" Screw Machine
105.Sheffield Model 121 Microform Grinder, 6" X-Travel, 2-1/4" Y-Travel, 7" x 7" Table, 6" Max Wheel Diameter, Pantograph Attachment, Viewing Microscope, 1/2 hp, 3-Phase, s/n 2-159, Approx: 2,500 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

Click on lot for machine video.

106.Set of (6) Namco 7/8" Round Collets for Acme AG-6 1-3/8" Screw Machine
107.Auxillary Spindle Cam for Acme AG-6 1-3/8" with Assorted Cams and Arms
108.2-Wheel Dolly, Solid Tires.
109.(4) Sets of Winter Thread Roll Dies, (1) 1/2-20, (3) 3/8-32.
110.Assorted Thread Roll Dies Including: (2) Winter 7/16-20, (1) 9/16-28 and (2) Sets of Form Rolls.
111.Assorted Winter Thread Roll Dies Including: (2) 5/8-18, 1/4-28, 3/8-32, 3/8-24 and Assorted Form Rolls.
112.Group of Assorted Carbide tipped Tool Bits. Mostly 1/2" and 5/8".
113.Assorted Dovetail Cutters.
114.(4) Matched Sets of Assorted Cams for Acme RA-6 1" and (2) Loose Cams
115.Metal Office Desk, 60" x 30" x 31".
116.HP Photosmart C4280 All-In-One Printer, Scanner, Copier.
117.Canon Fax Phone L80 Fax Machine.
118.146" Wide 6-panel Garage Door, 2- Height Sections.
119.Assorted Inserts and Knurling Dies.
120.Brown & Sharpe Model 00 Single Spindle Automatic Screw Machine, 1/2" Capacity in Rounds, 200 to 6,000 RPM, 6-Position Turret with 5/8" Holes, Front & Rear Slides, Vertical Slide, Coolant System, Stock Tube & Stand, Three Phase Motor and Controls, s/n 542-00-6715, Approx: 2,200 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

Click on lot for machine video.

121.Recess Tool Holder with 3/8" Tool Shank and 2" Diameter Shank
122.(2) Assorted Flat Form Tool Holders for Acme AG-6 1-3/8", Including: (1) ZG-145640 and (1) ZG-14560
123.(2) Assorted Tools for Acme AG-6 1-3/8", Including: (1) 2nd Position Adapter for Circular Stamp Tool and (1) Flat Form Tool Holder Model ZG-14560
124.Pair of Cams for Acme AG-6 1-3/8" Screw Machine
125.Wheeler Model PB-35BT Hexing Attachment for Acme AG-6 1-3/8" Screw Machine, 2nd Position, Including: .343", .250" and (1) Other Hexing Dies with Drive Spindle and Extra Parts
126.(4) sets of Gears for Acme AG6 1-3/8" Machine. 35/86, 98/23, 92/29, 82/39.
127.(4) sets of Gears for Acme AG6 1-3/8" Machine. 90/31, 68/53, 66/55, 70/51.
128.(4) sets of Gears for Acme AG6 1-3/8" Machine. 78/43, 59/62, 74/47, 64/57.
129.(5) Assorted Gears for Acme AG6 1-3/8" Machine. 98, 57, 62, 86, 70.
130.Dovetail Shave Tool Holder for Acme AG-6 1-3/8" Model SF-3195 with Block No. SF-3212 for 1-1/4" Dovetail
131.Mitutoyo Code No. 229-127 4" Digit Depth Micrometer. 2-1/2" Base.
132.Scherr-Tumico 0-1" Indicating Micrometer, Carbide Tipped Anvils.
133.Setting Indicator for Winter 151 Series Thread Roller.
134.Setting Indicator for Winter 160 Series Thread Roller.
135.Barrett Model 402 Carrier Type Chip Spinner, 23" Diameter x 15" Deep Basket Size, 2.1 Cu/Ft Capacity, 225 Lb Maximum Load Capacity, 1,200 RPM, Top Load, Approx 6 HP, Three Phase Motor and Controls, s/n 4021599E, Approx: 2,000 Lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

Click on lot for machine video.

136.Large Group of Winter Thread Roller Repair Parts.
137.(2) Kennametal Model SS150DA Straight Shank Collet Holders, 1-1/2" Diameter Shanks with (2) DA180 Series Collets
138.Kennametal Type Straight Shank Collet Tool Holders on 1-1/2" Diameter Shanks with (13) Assorted DA180 Series Collets
139.Threading Clutch for Acme AG-6 1-3/8" Screw Machine, 3rd Position
140.23" Dia. X 15" Height Chip Basket with Cart.
141.23" Dia. X 15" Height Chip Basket with Cart.
142.23" Dia. X 15" Height Chip Basket with Cart.
143.Pick-Off Assembly for Acme AG-6 1-3/8"
144.(3) Sets of Round Pusher Pad Sets for Acme AG-6 1-3/8", Including: 5/16", .318" and 3/8"
145.Spindle Speeder for Acme AG-6 1-3/8"
146.Assorted 7/16" Round Collet and Pusher Pads, Including: Set of (6) Collet and Pusher Pads and (15) Bronze Pusher Pads
147.Assorted Round Collet and Pusher Pad Sets for Acme AG-6 1-3/8", Including: (6) 3/4" Round Collet Pads, (4) 3/4" Round Pusher Pads, (6) 13/16" Collet Pads and (6) 13/16" Pusher Pads
148.Assorted Round Collet and Pusher Pad Sets for Acme AG-6 1-3/8", Including: (6) 25/32" Round Collet Pads, (6) 25/32" Round Pusher Pads, (6) 25/32" Hex Collet Pads and (6) 7/8" Round Pusher Pads
149.Threading Clutch for Acme AG-6 1-3/8" Screw Machine, Believed to be 5th Position
150.Quincy 325-12 5 hp Reciprocating Type Air Compressor with Approx. 60-Gallon Horizontal Receiver Tank, 480 Volt, 3-Phase, s/n: 54-4988L, Approx. 64"x 24" x 50".

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701)899-0543 for more information.

151.(2) Assorted 1-1/4" Adjustable Dovetail Toolholders for Acme AG-6 1-3/8"
152.Assorted Brown & Sharpe Single Spindle Tooling, Including: (4) Somma Slide Toolholders, (1) Box Tool on 5/8" Shank and (1) Knurling Tool with Extra Dies on 5/8" Shank
153.(2) 1-1/4" Adjustable Dovetail Toolholders for Acme AG-6 1-3/8", No Bases
154.(2) 5/8" Adjustable Dovetail Toolholders for Acme AG-6 1-3/8", No Bases
155.Theodor Jopp Model JOC Series Cam Cutter/Grinder for Brown & Sharpe Single Spindle Automatics
156.Assorted Collet Pads, Pusher Pads and Feed Fingers for Acme AG-6 1-3/8", Including: (8) 5/8" Round Pusher Pads, (5) 21/32" Collet Pads, (6) 21/32" Feed Fingers and (6) 11/16" Collet Pads
157.Assorted Collet & Pusher Pads for Acme AG-6 1-3/8" Including: (6) 29/32" Round Collet Pads and (6) Sets of 15/16" Round Collet & Pusher Pads
158.Assorted Toolholders for Acme AG-6 1-3/8", Including: (2) 1-1/4" Adjustable Dovetail Toolholders without Bases, (1) 5/8" Dovetail Toolholder without Base and (1) ZG-14573 Flat Form Toolholder
159.(5) Assorted Cross Slide Cams for Acme AG-6 1-3/8" Primarly for 2nd & 5th Position
160.Assorted Tooling For Single Spindle Brown and Sharpe.
161.(4) Assorted Cross Slide Cams for Acme AG-6 1-3/8", Including: (3) for 3rd & 4th Position and (1) Blank
162.5th Position Auxillary Slide Toolholder for Acme AG-6 1-3/8"
163.Large Group of Brown and Sharpe Single Spindle Automatic Cams.
164.Powered Drill Head, Belt Driven, 0-1/4" Chuck, 1/4 hp, 1725 rpm, 115 Volt, 1-Phase.
165.(10) Assorted Gear Box Bushings for Acme AG6.
166.Electric Clutch for Acme AG6.
167.Assorted Acme AG6 Change Gears, 42T, 71T, 45T, 65T, 25T and More.
168.Large Group of Assorted Acme AG6 Tooling as Shown.
169.Assorted Acme AG6 Parts Including: Bushing, Feed Finger and more.
170.(4) Deltronic Plug Gages. (1) 20.4725mm/.8060, () .8070, (1) .8090, (1) .8080
171.Powered Drill Head, Belt Driven, 1/3 hp, 3450 rpm, 2-8-220/380-440 volt, 3-Phase.
172.(5) Push Tubes For ACME AG6, 33-1/4" In Length.
173.Bennett Drum Hand Crank Barrel Pump.
174.Kennametal Model SS200DA401906 Collet Holder.
175.(6) RA8 Collets, Mostly 3/4" and 11/16".
176.Assortment of Fasteners, Threaded Rod and More.
177.Assorted Tooling, Collets, Holders, Bushings and More.
178.6th Position Tool Holder for Acme AG6, Stamped ZG14438 and (2) Custom Riser Plates.
179.(5) Assorted Cut-Off Tools for Acme AG6 and Assorted T-Slot Clamps and More.
180.KP Mfg. Hand Crank Drum/Barrel Pump.
181.Assortment of Machine Parts Including: Switches, Filters, Springs, Fasteners. Mostly Parts for Acme AG6.
182.Assorted Tool Holders for Acme AG6.
183.Assorted Tooling for Brown and Sharpe Single Spindle Automatics.
184.Metal Frame Table w/ Overhead Storage, Table Measures 72"x36"x29", Upper Storage Cabinet Measures: 60"x15"x36". Contents Not Included.
185.Metal Frame Laminate Top Table w/ Drawer, Overall: 60"x30"x30".
186.(3) 2 Drawer Verticle File Cabinets.
187.2 Door Cabinet, Overall: 36"x18"x72".
188.Section of (6) Lockers, Each Locker Measures 9"x14"x29" Internal Dimensions, Overall: 27"x15"x66".
189.4 Drawer Verticle File Cabinet.
190.2 Door Cabinet, Overall: 36"x18"x72".
191.Large Metal Liquid Coolant Tank, Overall: 122"x13"x38".
192.Laminate Top Desk w/ (2) 2 Drawer Verticle File Cabinets and Middle Drawer, Overall: 70"x30"x28-1/2".
193.Little Giant Pump Co. Model SE-CIM 115V. Pump.
194.Wood Work Bench, Overall: 38"x28"x30".
195.(2) Tool Shop 1/4" x 25' Air Lines. (New)
196.Slater Tool Model 24324-21 Recess Tool, 1" Shank Dia.
197.Assortment of Reamers From .121 to .4995.
198.Assortment of Stock Holding Racks Including (6) Blue w/ Base, Mostly 16"x12"x22", (2) Rolling Two Teir, Overall: 22" x 18" x 34", and (4) 14" Wide x15" Tall.