Hoff Online Auctions
Barrett Automatic Products - Thursday, February 1, 2018 Thursday, February 8, 2018 - Starting at 10:00am Central

Item Description
1.Acme Gridley Model RA-6 Automatic Screw Machine, 9/16" Capacity, 6-Spindles, Collet Capacities: 9/16" Round, 25/64" Square, and 31/64" Hexagon, 5" Maximum Stock Feed Length, 5" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 321 to 2,895 RPM, Universal Chip Conveyor, Stock Reel & Stand, 10 HP, Three Phase Motor and Controls, s/n 22412-BM, Approx: 120" x 54" x 91" (Not Including 9' Stock Reel) and 11,100 Lbs
Please Note: Tooling Not Included
Location:Glenwood, MN

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

1A.Akro Bins Small Parts Rack with Contents of Stainless Steel Hardware, Hex Bolts, Washers, Nuts, Lock Washers, Nylock Nuts and More. 36" x 24" x 54" Overall.
2.Criterion Model: S-3E Adjustable Boring Head, 2-1/2" Diameter Shank.
Loc: T-10
3.1.Hoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.
3.2.Please click on this lot for Preview Times at the Barrett Automatic Products Online Auction.
3.3.Please click on this lot for Rigging Information at the Barrett Automatic Products Online Auction.
3.4.UPS Shipping Available for small items Click here for more information.
3.5.This auction features EXTENDED BIDDING! View this lot to learn more.
3.6.This auction STARTS TO CLOSE at 10:00 AM Central Time at a rate of 5 lots per minute. Click this lot to learn more.
3.7.How much time is left?
3.8.Click on This Lot For Important Removal Information at the Barrett Automatic Products Online Auction.
4.Milling Attachment for Acme with 3/4" Keyway, Model S83006
Loc: T-10
5.Mitutoyo Code no. 500-196-20 6" Digimatic Caliper, s/n: 13090348.
Loc: INS
6.(8) solid Carbide Cutting Tools. 3/4" Diameter, Lengths from 5" to 6".
Loc: T-3
7.Kurt Model D-6888 Precision Machine Vise
Loc: CNC
8.(14) Vermont Gage Go/No Go Plug Gages. Sizes as Shown
Loc: INS
9.Palmgren 4" Tilting Vise.
Loc: T-5
10.Double Deck Dovetail Tool Holder for 1-5/8" & 2" Acme, 1-1/4" Dovetail
Loc: T-10
11.Huot #13025 5-Drawer Drill Cabinet.
Loc: T-5
12.Double Decker Tool Holder for Acme 1-1/4", 1st Position, 5/8" Dovetail.
Loc: T-9
13.(6) Assorted Sets of RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 78/26, 76/28, 74/30, 72/32, 70/34 and 68/36
Loc: T-9
14.Landis Head No. 10JN-2520, 1-1/4" Threading Die Head. 1-1/2" Shank.
Loc: T-10
15.(6) Assorted Sets of Feed Change gears for 1-1/4" Acme. Including: 64/36,54/46, 52/48, 60/40, 56/44, & 58/42.
Loc: T-8
16.Double Deck Dovetail Tool Holder for 2-5/8" Acme, 1st Position
Loc: T-10
17.(4) Sets of RPM Gears for 1-1/4" Acme including: 52/24, 56/20, 40/36, 42/32.
Loc: T-8
18.Wilton Model 500 5" Bench Vice.
19.(5) Assorted Cut-Off Cams for 1-1/4" Acme
20.Setting Fixture for Flat End Slide Tooling with 3/4" Keyway, Counter Type Micrometer Head
Loc: T-10
21.12-Drawer Rolling Cabinet. 57" x 17" x 40".
22.(2) Drill Chucks, (1) LFA, 1/32 - 5/8" Cap. w/ MT#3 Shank, (1) Jacobs 6A-2A, 0 -1/2" Cap., w/ Jacobs Straight Shank Model A4002 Shank.
Loc: T-3
23.(3) Jacobs Drill Chucks on Assorted Shanks. (1) No. 11N, 0-3/8", (1) No. 34, 0-1/2" and (1) 0-3/8".
Loc: CNC
24.Procunier Model 2 Tapping Head, Series 12C67, s/n: EMS.
Loc: CNC
25.Summit Model 350-M Horizontal Band Saw, 13" x 17" Rated Capacity, 15' x 1-1/4" Blade Size, Angle Table Vise, Hydraulic Down Feed, Adjustable Work Stop, Belted Blade Speeds, On Casters, Three Phase, Approx: 104" x 50" x 71"

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

26.(12) solid Carbide Cutting Tools. Sizes from 2" L x 1/2" Dia. Up to 3-7/8" x 1/2".
Loc: T-3
27.(101) Assorted Carbide Drills Including Straight Shank, Silver Demming, MT#1-3, Dia. From 13/32" Up to 1", Flute Length From 2-1/2" Up to 6-1/2".
Loc: T-1
28.Large Assortment of Drills, Dia. From 1/16" Up to 1", Flute Length From 1" Up to 5-1/2".
Loc: T-3
29.(60) Assorted Taps From 1/4-20NC Up to 1-18.
Loc: T-3
30.(38) Mostly Carbide Tipped Boring Bars.
Loc: T-3
31.TruStone Corp Granite Surface Plate, Overall: 12"x12"x3-1/4".
Loc: CNC
32.Withdrawn By Seller

Future Products Drum Fan.

33.Rolling Work Station w/ Drawer, Overall: 34"x18"x32", Granite Surface Plates Not Included.
Loc: CNC
34.Fairbanks C-60 Johnson Bar, 6" Platform, Overall: 62" Tall.
35.(15) Shop Stools, Several Need Repair, Most Measure 14"x14"x24".
Loc: CNC
36.Rol-Lift 1,500 Rated Capacity Stacker, 55" Max Lift, 36" x 3" Forks, 44" Between Outriggers, s/n: 103134.
37.Lista Type 9 Drawer Cabinet, Overall: 28"x28-1/2"x 42", Each Ball Bearing Slide Drawer Measures 4" Deep.
Loc: CNC
38.(26) Mostly Hardinge 5C Collets w/ Tray, Also Includes (2) Dead Stops and More Shown.
Loc: T-4
39.(27) Assorted Wrenches Including Standard and Metric, Sizes From 3/8" Up to 1-1/4".
Loc: T-4
40.Heinrich Type 4" Pneumatic Vise with Foot Switch.
Loc: T-3
41.Large Assortment of Hand Tools Including: Pipe Bender, Files, Wrenches, Pneumatic ools, Screw Drivers, Wrenches, and More Shown.
Loc: CNC
42.Large Assortment of Standard and Metric Allen Wrenches From 1.5MM Up to 9/16".
Loc: T-4
43.Large Assortment of Cutting Tools Including Insert Type and Carbide Tipped, Endmills, Boring Bars, and More Shown.
Loc: T-4
44.(10) Solid Carbide Cutting Tools (Mostly new or Like New). (9) 3/4" Diameter with Lengths from 4" to 6" and (1) 1" Diameter and 5-3/4" Length.
Loc: T-3
45.Jones and Lamson Model PC-14 Optical Comparator. 14" Screen Diameter, 18" x 6" Table, Acurite Vue DRO, Power Table Elevation, J&L Lens Kit, Extra Screens, 40" x 50" x 70" Overall.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.
Loc: INS

46.Approx. (300) Mostly New Carbide Inserts Including (100) Coromant TPE-43-2R, and More Shown.
Loc: T-5
47.Republic 2-Door Storage Cabinet. 36" x 18" x 78".
48.(60) Assorted Drills Including Straight Shank and MT Shank, Many Customized to Step Drills, Inspect Closely. Dia. From Approx. 5/8" Up to 1-1/4".
Loc: CNC
49.(11) Shelf Unit w/ Contents, Unit Measures: 74"x18"x76". w/ Adjustable Height Shelves, Contents Include: Assorted Fasteners, Machine Parts, Tooling, and More Shown.
50.Acme Gridley Model RB-8 Automatic Screw Machine, 1-5/8" Capacity, 8-Spindles, Collet Capacities: 1-5/8" Round, 1-9/64" Square, and 1-13/32" Hexagon, 10" Maximum Stock Feed Length, 8" Maximum Turning Length, Falt End Slide, Spindle Speeds: 163 to 1,478 RPM, Auxillary 3rd Position Slide, Universal Chip Conveyor, Stock Reel & Stand, Approx 30 HP, Three Phase Motor and Controls, s/n 85509, Approx: 193" x 54" x 119" with 8' Reel and 30,600 Lbs

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

51.Group of Assorted Custom Cutting Tools, Mostly Carbide Tipped.
Loc: T-3
52.(35) Assorted Taps, Inspect Photos Closely for Condition.
Loc: T-3
53.Approx. (37) HSS Straight Shank Drill Bits. Sizes up to 1" Diameter.
Loc: T-3
54.Approx. (50) Mostly Carbide Tipped Step Down Endmills.
Loc: T-3
55.(32) Solid Carbide Cutting Tools. Lengths up to 5" and Diameters up to 1/2".
Loc: T-4
56.(34) Mostly MT#2 and MT#3 Drills, Inspect Closely for Condition.
Loc: T-1
57.Assorted HSS Cutting Tools, Boring Bars, Double End Endmills, Taps and More.
Loc: T-3
58.(15) HSS Drill Bits. Sizes 11/16"-1", Flute Lengths 3"-6".
Loc: T-5
59.(4) Peterson Tooling Dovetail Tooling. Including 7100-4 FORM, 7100-4-PL, 7100-4-P6 and Approx. (40) Forming and Shaving Cutting Inserts.
Loc: T-5
60.(28) Solid Carbide Endmills and tool Bits. Sizes up to 3-1/2" L and 1/2" Diameter.
Loc: T-4
61.(40) Assorted Taps. Sizes Range from 3/4"-16 to 1-1/4"-11-1/2", Cutting Length 3/4" - 2".
Loc: T-7
62.Approx. (30) 1-5/8 Collet Pads.
Loc: T-4
64.Approx. (16) 1-3/4" Collet Pads.
Loc: T-4
65.Approx. (90) HSS Taps up to 1-3/8"-12.
Loc: T-1
66.3-Tier Rolling Shop Cart. 37" x 19" x 48".
67.(13) Assorted Insert type Square Shank Turning Tools, Mostly 1", Makes Include: Kennametal NSR-163D, Seco DWLNR-16-4D-M, Tungalloy STCR 16-27 and More.
Loc: T-3
68.Assorted HSS Taps up to 1-1/4-11-1/2.
Loc: T-3
69.(15) Assorted Square Shank Insert Type Turning Tools Including: Sandvik STFCR 12 3B, STDCL 12 3B, Kennametal SCGCR-103 and More.
Loc: T-3
70.Gigong Live Center on #4MT Shank.
Loc: CNC
71.(9) Mostly 1" Square Shank Insert Type Cutting Tools, Some as Seen.
Loc: T-3
72.Approx. (12) 1-7/8" Collet Pads.
Loc: T-4
73.Approx. (16) 1-7/8" Collet Pads.
Loc: T-7
74.Approx. (26) 1-5/16" Collet Pads.
Loc: T-4
76.Approx. (25 ) 1-7/8" Collet Pads.
Loc: T-7
77.Large Group of HSS Drillbits up to Approx. 1/2" Dia.
Loc: T-1
78.Approx. (50) HSS Drill Bits up to 1-1/8" Dia.
Loc: T-3
79.Approx. (50) Square Shank Cutters with Carbide tips. 3"- 3-1/2" Shank Lengths.
Loc: T-7
80.(20) #3 MT HSS Drill Bits. 13/16"- 1-1/16", 6" Flute Lengths.
Loc: T-7
81.(20) #2 MT HSS Drill Bits. 7/16" - 25/32", 3"-7" Flute Lengths
Loc: T-5
82.(12) #4 MT HSS Drill Bits. 1-1/8" - 1-1/2", 3-1/2"-9" Flute Lengths
Loc: T-7
83.OTC Tools Model 7402, Universal Outside Thread Chaser. 1-1/4"- 5" O.D., Dimensions: 11"x6"x 1.5" .
Loc: T-5
84.(14) #4 MT HSS Drill Bits. 1-7/16" - 2-1/8", 2"-7" Flute Lengths.
Loc: T-7
85.Approx. (30) 2" Collet Pads.
Loc: T-4
86.(15) #3 MT HSS Drill Bits. 45/64" - 1-1/4", 3-1/2"-6" Flute Lengths.
Loc: T-4
87.Large Group of Assorted HSS Drillbits, Sizes up to 9/16".
Loc: T-3
88.(30) #2 MT HSS Drill Bits.. Sizes: 27/64" - 3/4", 3-1/2" - 6" Flute Lengths.
Loc: T-4
89.(30) #2 MT HSS Drill Bits.. Sizes: 7/16"- 45/64", 3-1/2"-6" Flute Lengths.
Loc: T-4
90.(12) #3 MT HSS Drill Bits. Sizes: 11/16" - 1-15/64" , 3-1/2" - 7" Flute Lengths.
Loc: T-5
91.(3) #5 MT HSS Drill Bits. (2) Include Straight Shank Adapters. (1) 1-17/36", (1) 1-45/64", (1) 1-5/8". Approx. 10" Flute Lengths.
Loc: T-5
92.(90) Assorted T-Slot Nuts. 1/2" & 5/8" Threads. 1-1/4" at Expansion, 3/4" slot.
Loc: T-5
93.(15) HSS Drill Bits. Sizes 39/64"-1", Flute Lengths 3"-5".
Loc: T-5
94.(4) #5 MT HSS Drill Bits. (3) Include 2-1/2" Straight Shank Adapters, 1-5/8"- 1-27/32" Sizes, 4"-8" Flute Lengths.
Loc: T-5
95.(12) #4 MT HSS Drill Bits. 1-39/64" - 1-1/8", 6"-11" Flute Lengths.
Loc: T-7
96.(20) #2 MT HSS Drill Bits, 11/16" - 3/4", 5" Flute Length.
Loc: T-7
97.Group of Assorted Collets.
Loc: T-3
98.Group of Specialty Cutters and More.
Loc: CNC
99.Kurt 6" Precision Machine Vise with Handle.
Loc: CNC
100.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 302 to 2,370 RPM, Electric Chip Conveyor, Logan Threading, Magazine Loader, Stock Reel & Stand, Approx 20 HP, Three Phase Motor and Controls, s/n 70840, Approx: 145" x 47" x 96" and 13,500 Lbs, Please Note: Machine Currently Set Up as Chucker

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

101.Harig No. 1 Grindall Grinding Fixture with Case. 3" Center Height.
Loc: T-5
102.(15) 5C Collets. Sizes from 1/4" to 1".
Loc: T-5
103.Suburban Tool Inc. Model MCB-510-FP 5" x 10" Magnetic Chuck.
Loc: T-5
104.5C Collet Indexer.
Loc: T-5
105.Landis Model Lyndex 1-1/4 Threading Die Head on 3" Diameter Shank, Head # 10JN-1809
Loc: T-12
106.(5) Hammers Including: (2) Dead Blow, (3) Brass/ Copper, and More Shown.
Loc: T-4
107.(49) Assorted Wrenches Including Standard and Metric, Sizes From 1/4" Up to 1".
Loc: T-4
108.Approx. (50) 2-5/8" Collet Pads.
Loc: T-4
109.Approx. (36) 1-1/4" Collet Pads.
Loc: T-5
110.Approx. (20) 2-1/8" Collet Pads.
Loc: T-5
111.Approx. (24) 1-5/8" Collet Pads.
Loc: T-4
112.Approx. (24) 1-13/16" Collet Pads.
Loc: T-4
113.Approx. (26) 2.070 Collet Pads.
Loc: T-7
114.Mitutoyo No. 192-116 12" Dial Height Gage, .001-12".
Loc: INS
115.(2) Internal Dial Caliper Gages. (1) Intertest 71, .4-1.2", .001" (1) Scherr-Tumico 50-0139-01, .0005", .8"-1.3".
Loc: INS
116.(3) Dial Calipers. (1) Fowler 52-008-006, 6", .001" (1) Brown and Sharpe 6", .001" and (1) 8", .001".
Loc: INS
117.Approx. (68) Assorted 5C Collets.
Loc: CNC
118.Heinrich No. 1C Pneumatic 5C Collet Chuck with Foot Switch.
Loc: T-3
119.Approx. (52) Assorted 5C collets.
Loc: CNC
120.Brown and Sharpe Model 618 Micromaster Surface Grinder. Acurite 2-Axis DRO, 18" x 6" Electromagnetic Chuck with Walker Controller, Height of Work Ground w/ STD. 7? Wheel: 15-1/2? Maximum Longitudinal Travel: 22? Longitudinal Table Speed: 5 to 100 FPM Maximum Cross Travel: 7? Longitudinal Table Speed: 5 to 100 FPM Electrical: 230V/3PH Motor HP: 1.5

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

121.Group of Assorted Carbide Tipped Square Shank Turning Tools, Mostly 1/2" and 1" shanks.
Loc: T-1
122.LW Chuck Co. 8" 4-Jaw Lathe Chuck, Threaded Type, Approx. 1-1/2" Hole Thru.
Loc: T-3
123.Approx. (70) Assorted 5C Collets.
Loc: CNC
124.7" x 7" T-Slotted X-Y Positioning Table, 4-1/2" Surface Height.
Loc: T-3
125.Daewoo Model Lynx 200A CNC Turning Center, 11.02" Maximum Turning Diameter, 11.81" Maximum Turning Length, 1.75" Maximum Bar Capacity, 13.78" Swing Over Cross Slide, 18.11" Swing Over Bed, 6.3" X-Travel, 13.0" Z-Travel, 12-Position Turret, 5C Collet Nose, 5,000 RPM Spindle, Fanuc Series 21-T CNC Controls, Tailstock, Chip Pan, Coolant, Tool Presetter, Three Phase Motor and Controls, s/n L2000682 (New 1998), Approx: 72" x 68" x 62" and 6,500 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

Click on lot for machine video.

126.Approx. (40) Assorted Cutting Tools Including Endmills, Center Holes, and More Shown.
Loc: T-1
127.(39) Solid Carbide Tool Bits From 2 Flute Up to 5 Flute, Dia. From 3/16" Up to 3/8".
Loc: T-4
128.(3) Drill Chucks Including: (1) LFA 43-6A 2JT, 0 - 1/2" Cap., (1) Jacobs Multi-Craft Model MC4K61, 1/16" - 3/8" Cap., and (1) Supreme Model 4T, 0-1/4" Cap, 2 Taper Chuck.
Loc: T-1
129.Approx. (250) HSS Drills from 21/64" Up to 9/16", Flute Length From Approx. 1-1/2" Up to 4-1/2".
Loc: T-1
130.Assortment of Mostly Square Shank Cutting Tools, Some Carbide Tipped.
Loc: T-1
131.(28) Mostly MT#2 HSS Drills Dia. From 13/32" Up to 15/16", Flute Length From 2-1/2" Up to 6".
Loc: T-1
132.Approx. (150) HSS Drills, Many New, Dia. From 11/64" Up to 31/32".
Loc: T-1
133.Large Group of Cutting Tools Including Taps, Drills, Micro Carbide Tipped Boring Bars, Carbide Tipped Step Down Endmills, and More Shown.
Loc: T-1
134.4" Drill Press Vise.
Loc: T-1
135.(16) Solid Carbide Cutting Tools. Lengths up to 4" and Diameters up to 1".
Loc: T-4
136.(2) Depth Micrometers, (1) Starrett No. 445, (1) Presise 1/1000
Loc: INS
137.Mitutoyo No. 126-138 1-2" Screw Thread Micrometer, .001", s/n:9012916.
Loc: INS
138.Brown and Sharpe No. 607 Depth Micrometer with Wood Case.
Loc: INS
139.Starrett Model 1175 Dial Groove gage with Wood Case, .0005".
Loc: INS
140.(2) Granite Base Indicator Stands. (1) with Baker Model JB54 Dial Indicator.
Loc: INS
141.(4) Mag Base Indicator Stands with (3) Dial Indicators. (2) Teclock .001" and (1) Aerospace .001".
Loc: INS
142.(3) Assorted Indicator Stands. (2) Granite Base with Aerospace .001" Dial Indicators and (1) Cast Base with Mitutoyo no. 2802-10 Dial Indicator, .0001"-.025".
Loc: INS
143.(3) Assorted Micrometers. (1) Mitutoyo 122-126 1-2" .0001" Blade Mic, (1) brown and Sharpe 1-2", (1) 0-1".
Loc: INS
144.(4) Granite Base Indicator Stands with (4) .001" Dial Indicators. (1) Fowler, (1) Aerospace.
Loc: INS
145.(9) Assorted V-Blocks. (1) Pair 1-3/4" x 1-5/8" x 2-3/4", (1) Pair 1-3/4" x 1-7/8" x 2" and (1) Pair 1-1/2" x 1-1/2" x 2" and More.
Loc: INS
146.Approx. (40) 2-1/4" Collet Pads.
Loc: T-7
147.Approx. (46) 1-1/4" Hex Collet Pads.
Loc: T-7
148.2 Wheel Dolly, Pneumatic Tires, 14"x8-1/2" Platform, Overall: 21"x20"x51".
149.(2) 5C Collet Indexers.
Loc: T-4
150.Acme Gridley Model RB-6 Automatic Screw Machine, 2-5/8" Capacity, 6-Spindles, Collet Capacities: 2-5/8" Round, 1-27/32" Square, and 2-17/64" Hexagon, 9" Maximum Stock Feed Length, 8" Maximum Turning Length, Flat End Slide, Spindle Speeds: 101 to 1,065 RPM, Mechanical Threading, Universal Chip Conveyor, Stock Reel & Stand, Approx 40 HP, Three Phase Motor and Controls, s/n 84948, Approx: 178" x 55" x 104" with 8' Reel and 30,900 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

152.Large Assortment of Mostly Carbide Tipped Square Shank Cutting Tools, Square Shank From 3/8" Up to 1".
Loc: T-1
153.Group of Assorted 45/64" Drill Bits on #2 MT Shanks.
Loc: T-1
154.Rolled Thread Dies, Several As Seen.
Loc: T-1
155.(100) Assorted Cutting Tool Inserts.
Loc: T-1
156.Box of 9/16" and 11/16" No.2 MT Shank Drill Bits.
Loc: T-1
157.(3) Jacobs Chucks Including (1) No.30, 0 - 5/16" Cap., (1) model 2A, 0-3/8" Cap., and (1) Model 6A, 0-1/2" Cap., Shank Types As Shown.
Loc: T-1
158.Huot 3-Drawer Letter Drill Cabinet.
Loc: T-5
159.Standard No. 1X Dial Bore Gage with Wood Case.
Loc: INS
160.(2) Assorted Double Deck Tool Holders for 9/16" Acme, 5/8" Dovetail
Loc: T-9
160A.Rathbone Chucking Lathe, Approx 9" Swing, 12" Maximum From Spindle Face to Turret, 6-1/4" 3-Jaw Chuck, 8-Position Turret, Variable Spindle Speeds: 0 to 3,600 RPM, Variable Feeds, Coolant, 5C Collet Closer, Three Phase Motor and Controls, s/n na, Approx: 60" x 42" x 60"

Location: Glenwood, MN

161.Over (100) HSS Taps. Sizes as Shown.
Loc: T-4
162.(4) Granite Base indicator Stands.
Loc: T-4
163.Assorted Inspection for Repair or Parts.
Loc: INS
164.Starrett Grade B Pink Granite Surface Plate. Overall: 18"x12"x4".
Loc: CNC
165.Metal (7) Shelf Storage Rack w/ Contents. Overall: 36"x18"x84", Contents As Shown In Pictures.
166.(14) MT#4 and #5 Drills, Dia. From 1-5/32" Up to 1-5/8", Some New, Flute Length Mostly Averages 9".
Loc: CNC
167.(16) New MT#2 Drills.
Loc: CNC
168.Approx. (125) Cutting Tool Inserts Including (37) Carboloy TPMG 542E, and More Shown.
Loc: CNC
169.Approx. (85) New and Used Thread Chasers, From 5/16-24NF Up to 11/16-16 UN and More Shown.
Loc: CNC
170.Large Assortment of Carbide Tipped Tool Bits and Boring Bars
Loc: T-15
171.Approx. (30) Cobalt Spade Drill Insert Cutters.
Loc: T-3
172.5C Collet Indexer, 4" Center Height.
Loc: T-3
173.Large Assortment of Hold Down Hardware Including T-Slot Bolts/Nuts, Hold Down Straps, (2) Organizers, From 3/8" up to 5/8".
Loc: CNC
174.(23) TG100 Collets From 13/32" Up to 15/16".
Loc: T-3
175.Assortment of Specialty Tooling Including Machine Bushings, and More Shown.
Loc: T-1
176.(2) Make/Model Unknown Threading Heads on 5/8" Dia. Shanks.
Loc: T-4
177.Tool Bushings for CNC Lathe from 1/2" Up to 1-1/4".
Loc: T-3
178.Metal (7) Shelf Storage Rack w/ Contents. Overall: 36"x18"x84", Contents As Shown In Pictures.
179.Approx. (75) Taps, Many New, Sizes From M3x.5 Up to 1-1/4-18NEF.
Loc: CNC
180.Shelving Unit w/ Contents, Unit Measure: 74"x18""x76"" w/ Adjustable Height Shelves, Contents Include: MT Drills, Taps, Endmills, Square Shank Cutting Tools, Reamers, and More Shown. * Drawer Unit In Photos Not Included.
181.Clark Model CH-80 LP Powered Forklift, Approx 4,000 Lb Rated Capacity, Tilting Forks, Manual Transmission, Cushion Tires, s/n I6-2040
Please Note: Brakes are non operational, need repair. Engine Runs
182.Assortment of Hand Tools Including: Spanner Wrenches, Screw Drivers, 18" Pipe Wrench, Hack Saws, Snap Ring Pliers, and More Shown.
Loc: CNC
183.(3) Micrometers. (2) 2-3", (1) 1-2".
Loc: INS
184.Huot #13000 3-Drawer Drill Cabinet.
Loc: T-5
185.Microcentric Model 6-40 6" 3-Jaw Chuck
Loc: T-12
186.Group of Assorted Thread Roll Dies. Sizes as Shown.
Loc: T-5
187.Large Lot of Go/No GO Gage Holders.
Loc: INS
188.Rockwell Model 23-415 Double End Grinder, 1/2 hp, 208-220/440 Volt, 3-Phase, 24" x 16" x 46".
189.Wood Shelf With Contents of Grinding Components, Taps, Machine Parts and More.
190.Approx. (45) Mostly Large Dia. Drills, Dia. From Approx. 1/2" up to 1-1/4".
Loc: T-1
191.(24) Assorted HSS Drill Bits, #1-#4 MT Shanks. Sizes up to 1-5/8".
Loc: T-1
192.Assorted HSS Cutters Including Reamers, Center Drills, and More Shown.
Loc: T-3
193.Jacobs No, 36 Drill Chuck on R8 Shank. 3/16"-3/4".
Loc: T-3
194.Heinrich Type 4" Pneumatic Vise. 150 Lb. Max Holding.
Loc: T-3
195.Powermatic Model 1150 4-Spindle Drill Bank, 12" Throat, 19-3/4" x 65-1/2" T-Slotted Table, (5) Belted Speeds, (3) Heads with 1/2" Capacity Drill Chucks, (1) Drill with Procunier Model E Size 2 Tapping Attachment, Three Phase
Loc: CNC
196.(2) 5C Grinding Fixtures
Loc: T-5
197.69" Johnson Bar.
198.7" x 4-1/2" Demagnetizer.
Loc: T-1
199.General Accucount 200 lb Capacity Scale on Metal Stand. 28" x 26" x 64" Overall.
200.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 302 to 2,370 RPM, Air Over Electric Threading with Standard Threading Clutches, Universal Chip Conveyor, Stock Reel & Stand, 20 HP, Three Phase Motor and Controls, s/n 71117, (Please Note: Rebuilt By Ecorse in 1972), Approx: 152" x 42" x 104" with 9' Reel and 13,500 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

201.Phase II 5C Collet Indexer Stock No.. 225-205, Table to Center Height 4". S/N: R-0688, Also Includes 5C Parts Indexer.
Loc: CNC
202.Approx. (115) Cutting Tool Inserts.
Loc: T-3
203.Palmgren Type 3-1/2" Tilting Vise.
Loc: T-5
204.(25) 5C Collets. Sizes from 5/32" to 1-1/8".
205.Landis Model Lyndex 1-1/4 Threading Die Head on 1-1/2" Diameter Shank, Head # 10JN-1860
Loc: T-12
206.NPS Model 98 Touchmatic Gummed Tape Dispenser.
207.(2) Palmgren 4" Vises ( For Parts or Repair)
Loc: T-5
209.Approx. (24) 2-5/16" Collet Pads.
Loc: T-4
210.Approx. (24) 2-3/8" Collet Pads.
Loc: T-4
211.Approx. (40) 2-1/2" Collet Pads.
Loc: T-7
212.Approx. (28) 1-1/2" Collet Pads.
Loc: T-4
213.Approx. (20) 2-9/16" Collet Pads.
Loc: T-5
214.Approx. (30) Assorted Collet Pads. Sizes 1-7/8" - 2".
Loc: T-7
215.(3) Assorted Drill Chucks Including: (1) Jacobs 34-02, 0-1/2", (1) Jacobs 633C, 0-1/2" and (1) LFA 43-60, 0-1/2".
Loc: T-3
216.(26) Assorted HSS Straight Shank Drill Bits. Sizes up to Approx. 2" Diameter.
Loc: T-3
217.Approx. (100) Mostly Drills From Approx. 1/16" Up to Approx. 1-1/8".
Loc: T-3
218.Albrecht 3-16 Keyless Drill Chuck on Jacobs Straight Shank. 1/8-5/8" Capacity.
Loc: CNC
219.(2) Grinder Pedestals.
220.(2) Slitter and Slitter Type Shave Tool Holders Model 62-9, 1-1/4" to 2-5/8" Capacity with 71-93 and 71-105 Shave Blocks
Loc: T-15
221.Heavy Duty Rolling Shop Table. 34" x 33" x 26".
222.Miller Model Thunderbolt 225V Arc Welding power Source. 25 Volts, 225 Amps @ 20% Duty Cycle, 80 Max OCV, Gun and Ground Cable, 230 Volt, 3-Phase.
223.(6) Assorted Cut-Off Cams for 9/16" and 1' Acme
Loc: BS-13
224.Huot #13050 3-Drawer Letter Drill Cabinet.
Loc: T-5
225.Kia Model KIT 30B Gang Type CNC Lathe, 5.9" Maximum Turning Diameter, 5.9" Maximum Turning Length, 1.5" Bar Capacity, 6.69" Swing Over Cross Slide, 18.9" Maximum Swing Over Bed, 9.8" x-Travel, 15.7" Z-Travel, 7-3/4" x 19-1/2" T-Slotted Tooling Platen, 5,000 RPM Spindle, Yasnac CNC Controls, Kitagawa 6" Chuck, Chip Pan, Coolant, Three Phase Motor and Controls, s/n KIT30046 (New 1997), Approx: 57" x 55" x 68" and 6,000 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

Click on lot for machine video.

227.(5) Assorted Roll Rests for 9/16" & 1" Acme's with Humback End Slides
Loc: BS-13
228.(2) Assorted 5/8" Dovetail Double Decker Toolholders for 9/16" & 1" Acme's, Including: (1) 67-6 1st Position and (1) 6th Position
Loc: BS-13
229.WF Wells Model A-7 Horizontal Band Saw. s/n: 776531, 1-Phase, 54" x 26" x 33" Overall.
230.(5) Assorted Dial Calipers. (1) Brown and Sharpe 599-579-4, .001", 6". (1) Mitutoyo 505-626-50, 6", .001" and More.
Loc: INS
231.(3) Assorted micrometers. (1) Lufkin no. 1944, 3-4", (1) Starrett No. 486, 1-2" and (1) Brown and Sharpe 1-2".
Loc: INS
232.(4) Assorted Dial Indicators. (1) Baker Type JB54, .0005"-0.5", (1) Johnson No. 90733-A, .00025", (1) Mitutoyo No. 2922, .0005"-.125" and (1) Federal C6K, .0005"
Loc: INS
233.(3) Partial Gage Block Sets. (1) Starrett up to 1", (1) Workshop Grade, up to 4", (1) .050-4".
Loc: INS
234.(17) Insert Type Cutting Tools Including (2) 1/2" Square Shank, (5) 3/4" Square Shank, (2) 9/16" Square Shank, (4) 1" Square Shank, and More Shown.
Loc: T-1
235.(25) Mostly #4 MT Drills, From 1-3/16" Up to 1-5/8"., Condition As Is. Inspect Closely.
Loc: T-1
236.Large Assortment of Standard and Metric Sockets Including Deep Well, 12 Point, Sizes From 3/16" Up to 1-3/8".
Loc: CNC
237.Assortment of Cutting Tools Including: Many Endmills, Center Hole Drills, Carbide Tipped Boring Bars, and More Shown.
Loc: T-1
238.Group of Assorted Tool Bits.
Loc: T-3
239.Large Assortment of Mostly Used Taps, From 10-24H3 Up to 7/8-14 NF.
Loc: T-3
240.Approx. (50) Mostly MT#2 HSS Drills From 13/32" Up to 1-13/64".
Loc: T-1
241.Large Assortment of Mostly Straight Shank Dia. Drills, From Approx. 1/8" Up to 15/16".
Loc: T-1
242.(38) MT#3 Drills From 13/16" Up to 1-1/16", Flute Length From Approx. 2-1/2" Up to 6-1/2".
Loc: T-1
243.Approx. (20) Boring Bars Including Insert Type and Cemented Carbide Tipped.
Loc: T-3
244.Assorted Inspection Including: (3) .0005" Dial Indicators, Shars 6" Caliper and More. (Some as is)
Loc: INS
245.Assorted Inspection Including: (3) depth Gages, (2) Micrometers (1) 0-1", (1) 1-2", Standards and Radius Gage Set.
Loc: INS
246.(5) Teclock No. AI-921 Dial Indicators, .001"-1.0".
Loc: INS
247.Group of Assorted Inspection (Parts Only)
Loc: INS
248.(1) Indicator Stands. (1) Granite (1) Cast
Loc: INS
249.(12) Vermont Gage Go/No GO Plug Gages. Sizes as Shown.
Loc: INS
250.Acme Gridley Model RB-6 Automatic Screw Machine, 2-5/8" Capacity, 6-Spindles, Collet Capacities: 2-5/8" Round, 1-27/32" Square, and 2-17/64" Hexagon, 9" Maximum Stock Feed Length, 8" Maximum Turning Length, Flat End Slide, Spindle Speeds: 101 to 1,065 RPM, Auxillary Reaming, Auger Type Chip Conveyor, Stock Reel & Stand, Approx 40 HP, Three Phase Motor and Controls, s/n 84237-A, Approx: 188" x 54" x 114" with 8' Reel and 30,900 Lbs

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

251.(5) Assorted Low & High Block 5/8" Dovetail Toolholders for 9/16" & 1" Acme's
Loc: BS-13
252.Shave Toolholder for 9/16" & 1" Acme's Model 62-2
Loc: BS-13
253.(6) Assorted Flat Form Toolholders for 9/16" & 1" Acme and Box Tool for Humpback End Slide
Loc: BS-13
254.Double Deck Dovetail Toolholder Model FFD-38 For Acme Screw Machine
Loc: BS-13
255.(8) Assorted Cut Off Cams for 9/16" & 1" Acme
Loc: BS-13
256.Criterion Type Adjustable Boring Head on 1-1/2" Shank
Loc: BS-13
257.Criterion Model 3 Adjustable Boring Head on 1-1/2" Shank
Loc: BS-13
258.Slitters Model 58-1 Recess Toolholder on 1-1/4" Shank
Loc: BS-13
259.Federal Auto Recess Tool for Humback End Slide
Loc: BS-13
260.(2) Sets of Cams for 9/16" RA-6 Acme, Including (1) Double Stock Feed and (1) Lead Cam
Loc: T-2
261.(8) Sets of Assorted Stock Feed and Lead Cams for 1-1/4" Acme
Loc: T-3
262.(8) Sets of Assorted Loose Cams for 1-1/4" Acme
Loc: T-4
263.(6) Assorted Sets of Feed Gears for 1-1/4" Acme, Including: 72/28, 64/36, 52/48, 54/46, 56/44 and 58/42
Loc: T-8
264.(6) Assorted Sets of Feed Gears for 1-1/4" Acme, Including: 72/28, 56/44, 52/48, 54/46, 56/44 and 58/42
Loc: T-8
265.(6) Assorted Sets of Feed Gears for 1-1/4" Acme, Including: 60/40, (2) 54/46, 58/42, 52/48 and 60/40
Loc: T-8
266.(4) Assorted Sets of Feeds Gears for 1-1/4" Acme, Including: (2) 62/38, 52/48 and 56/44
Loc: T-8
267.(15) Assorted Feed Gears for 1-1/4" Acme with Sizes Between 30 and 66
Loc: T-8
268.Heavy Duty 5" Bench Vise
Loc: T-11
269.(5) Assorted RPM Gears for 1-1/4" Acme, Including: (3) 36/40, 38/38 and 34/42
Loc: T-8
270.(8) Assorted RPM Gears for 1-1/4" Acme from 22T
Loc: T-8
271.(8) Assorted Sets of Cross Slide Cams for 1-1/4" Acme
Loc: T-7
272.(7) Assorted Sets of Cross Slide Cams for 1-1/4" Acme
Loc: T-7
273.Turret Tool Holders for Daewoo Lynx.
Loc: CNC
274.Tool Blocks for CNC Gang Lathe.
Loc: CNC
275.Shelden Cat No. SEWQ Engine Lathe, 11" x 36" Rated Capacity, 11" Swing Over Bed, 7" Zswing Over Cross Slide, 36" Maximum Between Centers, 1-1/2" Hole Thru Spindle, 8-Spindle Speeds: 50 to 1,355 RPM, 8" 3-Jaw Chuck, Tailstock, Standard Threading, Three Phase Motor and Controls, s/n na

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.
Loc: CNC

276.Heinrich Pneumatic 4" Vice w/ Foot Pedal.
Loc: CNC
277.(68) Assorted Collets for 9/16" Acme. Sizes: 1/4"- 5/8".
Loc: T-2
278.Screw Machine Tool Co. Model 62-9 Shave Tool Holder with 71-63 Shave Block, 1-1/4" to 2-5/8" Capacity
Loc: T-12
279.Assortment of Used Carbide Inserts, Approx. 30lbs.
Loc: CNC
280.3" Pneumatic Vice.
Loc: CNC
281.Approx. (175) Assorted Feed Finger for 9/16" Acme.
Loc: T-2
282.Rite-Hete Type VR Melting Pot. 1-Quart Capacity.
Loc: INS
283.(6) Assorted Dial Indicators Incuding: Starrett 25-231, .0005" (As is), (2) Aerospace .001" and More.
Loc: INS
284.Flat Form Double Deck Toolholder Model FFD-5 for 9/16" & 1" Acme, 1st Position
285.(2) Slitters Model 62-9 Shave Tool Holders, 1-1/4" to 2-5/8" Capacity with 1-1/4" Dovetail
Loc: T-13
286.Heinrich Pneumatic 4" Vice w/ Foot Pedal.
Loc: CNC
287.Approx. (50) Mostly MT#2 HSS Drills, Dia. From 13/32" Up to 1-3/64".
Loc: T-1
288.Landis "Landex" 7/8" Threading Head on 1-1/2" Dia. Shank.
Loc: T-1
289.Large Assortment of Metric + Standard Allen Wrenches from 1.5MM Up to 9/16".
Loc: CNC
290.Approx. (150) Mostly Straight Shank Drills, Dia. From 3/32" Up to 45/64".
Loc: T-1
290A.Cincinnati No. 2 Tool and Cutter Grinder, 5-1/4" x 36" T-Slotted Table, 16" Longitudinal Table Travel, 8" Cross Travel of Table, 7 1/2" Vertical Adjustment of Spindle, Grinding Spindle Swivels 360 Degrees, 10" Maximum Swing Over Table, 27" Max Distance Between Centers, Centers, 3-Phase Motor and Controls, s/n: 74045, Approx: 2,300 Lbs

Location: Glenwood, MN

291.Landis 5/8" Threading Head with 1" Dia. Shank.
Loc: T-1
292.Approx. (55) Taps From #10-24 NC Up to 1/2-14 NPS.
Loc: T-3
293.(26) Assorted Go/No Go Plug Gages up to 1.6260-1.6290.
Loc: INS
294.Heinrich Pneumatic 4" Vice w/ Foot Pedal.
Loc: CNC
296.(2) Door Cabinet w/ Contents of Electrical Items, Cabinet Measures: 36"x18"x78".
Loc: BS-10
297.Torit Model 64 Dust Collector, 3/4 hp, 220/3-Phase, 24" x 24" x 63".
298.Baldor Cat No. 500 Drill Grinder. (Parts or Repair)
299.Magna Lock Model HR-612 6" x 12" Electromagnetic Chuck, 4" Surface Height, 110 Volt, s/n: 1164.
Loc: T-5
300.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 302 to 2,370 RPM, Air Over Electric Threading, Universal Chip Conveyor, Stock Reel & Stand, 25 HP, Three Phase Motor and Controls, s/n 71120, (Please Note: Rebuilt By Ecorse in 1972), Approx: 142" x 42" x 89" with 9' Reel and 13,500 Lbs

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

301.WCS 6-1/2" 3-Jaw CNC Lathe Chuck, Approx. 2" Hole Thru.
Loc: CNC
302.Large Group of HSS Drillbits up to Approx. 1/2" Dia.
Loc: T-1
303.(2) 6-1/2" CNC Lathe Chucks (as is/for parts). (1) Howa HH037M6 and (1) Kitigawa HOB-6.
Loc: CNC
304.Kurt 6" Machine Vise for Parts.
Loc: CNC
305.ATS Workholding 5c Collet Chuck for CNC Lathe, Approx. 6-1/2" Diameter Mounting Plate.
Loc: CNC
306.Large Group of Assorted HSS Reamer, Sizes up to 1-1/4".
Loc: T-1
307.ATS Workholding A5 Spindle 16C Collet Holder with (2) 16C Collets.
Loc: CNC
308.(24) 1" Collet Pads.
Loc: T-7
309.Approx. (20) 1-3/8" Collet Pads.
Loc: T-7
310.Double Deck Dovetail Tool Holder for 1-5/8" Acme, 1-1/4" Dovetail with Slitter Model 62-6 Shave Tool Holder, 3/8" to 1-5/8" Capacity
Loc: T-9
311.Withdrawn By Seller
Patton 30" Industrial Fan. Model: 1010MP, Style #: ME-74SP, 120V, 60HZ, 350W, 3.0A, S/N 406267, 30"x 28" 73".
Loc: T-11
312.6 Drawer Metal Cabinet on Casters. 12x"20"x40".
Loc: T-2
313.Assorted Fingers Primarily for 1-1/4" Acme.
Loc: CNC
314.(16) Vermont Gage Go/No-Go Plug Gages. Sizes as Shown.
Loc: INS
316.Rolling 2 Drawer Cabinet, Overall: 18"x24"x36".
317.2 Wheel Dolly w/ Steel Tires, Platform Measures 11-1/2" x11-1/2", Overall: 16"x20"x50".
318.Scale Sensor Model LX7 Digital Scale, Includes DRO w/ Computer Output, Platform Measures: 23-1/2"x18".
319.Withdrawn By Seller
Aercology Model E-500 Mist/Smoke Fume Collector, Includes Hood and More Shown.
321.Custom Built Welding Table w/ Wilton 4" Bench Vise, Overall: Table Measures: 42"x20"x35-1/2", 3/8" Thick Steel Top, Vise has 0-8" Holding Cap.
Loc: BS-10
322.Republic (2) Door Cabinet w/ Contents, Cabinet Measures:36"x18"x78".
Loc: BS-10
323.(8) Go/No Go Gages up to .507-.512
Loc: INS
324.Nutting Cart w/ Steel Top. Overall: 56"x25-1/2"x16".
Loc: CNC
325.Matsuura Model MC-500V CNC Vertical Machining Center, 12.6" x 36.2" T-Slotted Table, 20" X-Travel, 13" Y-Travel, 18" Z-Travel, BT-35 Spindle Taper, 6,000 RPM Maximum Spindle Speed, 16-Tool Automatic Tool Changer, System M5G CNC Controls, Table Guarding, Three Phase Motor and Controls, s/n 81021682, Approx: 70" x 66" x 97" and 6,000 Lbs

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

326.Workstation Cabinet, Overall: 32"x20"x31".
Loc: BS-10
327.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 80/24, 72/32, 68/36, 60/44, 58/46 and 56/48
Loc: T-11
328.(6) Assorted Dovetail Tool Holders for RB 2-5/8" Acme, Including: (5) 1-1/4" Dovetail and (1) 5/8" Dovetail Holders
Loc: T-15
329.Criterion Model 3 Adjustable Boring Head, 1-1/2" Shank.
Loc: T-10
330.(9) Vermont Gage Go/No Go Plug Gages. Sizes as Shown.
Loc: INS
331.Approx. (24) 1-1/2" Collet Pads.
Loc: T-5
332.Approx. (24) 1-1/8" Collet Pads.
Loc: T-7
333.Approx. (20) 1-3/16" Collet Pads.
Loc: T-7
334.Approx. (24) 2-716" Collet Pads.
Loc: T-7
335.Shave Tool Holder Model ASH 5-3 with 4-3/4" x 3-3/4" x 2-1/2" Shave Block
Loc: T-13
336.(11) Go/No Go Thread Gages. Sizes up to 1-1/2 11-1/2 NPT
Loc: INS
337.(3) Criterion Type Adjustable Boring Heads, 1-1/2" Shank.
Loc: T-10
338.Approx. (24) 1-3/8" Collet Pads.
Loc: T-7
339.Approx. (24) 1-1/16" Collet Pads.
Loc: T-5
341.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 74/30, 68/36, 66/38, 64/40, 60/44 and 58/46
Loc: T-11
342.Assorted Tooling for 1-5/8" Acme, Including: (1) FDD-17 Double Deck Dovetail Tool Holder, (3) Assorted Flat Form Tool Holders, (1) 5/8" Dovetail and (2) Sets of Cams
Loc: T-14
343.Double Deck Dovetail Tool Holder Model FDD-11 for 1-1/4" Acme, 1st Position
Loc: T-9
344.Double Deck Dovetail Tool Holder Model FDD-11 for 1-1/4" Acme, 1st Position
345.Double Deck Dovetail Tool Holder Model FDD-11 for 1-1/4" Acme, 1st Position and FF-28 Flat Form Tool Holder
Loc: T-9
346.Double Deck Dovetail Tool Holder Model FDD-11 for 1-1/4" Acme, 1st Position
Loc: T-9
347.(9) Assorted BT35 Tool Holders Including: (2) Command B3C4-0016, Nikken WE3/4-60, Command B3E4-0500 and More.
Loc: CNC
348.(7) Assorted BT35 ER16 Collet Holders. (4) Command B3C4-0016, (3) Extra Length Holders.
Loc: CNC
349.(4) BT35 Quick Change Tapping Tool Holders, Some As is.
Loc: CNC
350.Acme Gridley Model RB-8 Automatic Screw Machine, 1-5/8" Capacity, 8-Spindles, Collet Capacities: 1-5/8" Round, 1-9/64" Square, and 1-13/32" Hexagon, 10" Maximum Stock Feed Length, 8" Maximum Turning Length, Flat End Slide, Spindle Speeds: 163 to 1,478 RPM, Universal Chip Conveyor, Stock Reel & Stand, Approx 30 HP, Three Phase Motor and Controls, s/n 85511, Approx: 186" x 55" x 120" with 8' Reel and 30,600 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

351.Slitter Model 62-5 Shave Tool Holder, 0 to 1-1/4" Capacity with 61-66S Shave Block
Loc: T-9
352.Auxillary Milling Attachment Model T-90168, Approx 4" x 5-3/4" x 5-1/8"
Loc: T-9
353.(5) Assorted Tools for 1-1/4" Acme, Including: (1) 69-1 Double Deck Dovetail Tool Holder with 1-1/4" Dovetail, (1) High Block Dovetail Holder, (1) Low Block Dovetail Tool Holder, (1) FF-30 Flat Form Tool Holder and (1) Roll Support for Flat End Slide
Loc: T-9
354.(2) Assorted Double Deck Dovetail Tool Holders for 1-1/4" Acme, Including: (1) 1st Position and (1) 6th Position with FD10A Dovetail Tool Holder
Loc: T-9
355.Contents of (18) Collets (Some with Pushers) on Shelf for 1-1/4" Acme, Including: (1) 3/8" Hex, (5) 7/16" Hex, (6) 1/2" Hex and (6) 5/8" Hex
Loc: BS-2
356.Contents of (19) Collets (Some with Pushers) on Shelf for 1-1/4" Acme, Including: (6) 17mm Rd, (6) 15/16" Hex, (1) 1" Hex, (1) 1-1/16" Hex and (6) 1-1/8" Hex
Loc: BS-3
357.Contents of (11) Collets (Some with Pushers) on Shelf for 1-1/4" Acme, Including: (4) 3/4" Hex, (1) 13/16" Hex, (5) 7/8" Hex and (1) 15/16" Hex
Loc: BS-2
358.Contents of (18) Collets (Some with Pushers) on Shelf for 1-1/4" Acme, Including: (2) 7/8" Hex, (1) 3/4" Hex, (1) 5/8" Hex, (1) 9/16" Hex, (1) 1-1/16" Rd, (1) 3/4" Rd, (6) 13/16" Rd and (5) 15/16" Rd
Loc: BS-3
359.Contents of (38) Collets (Some with Pushers) on Shelf for 1-1/4" Acme, Including: (9) 3/8" Rd, (8) 7/16" Rd, (4) 1/2" Rd, (7) 9/16" Rd and (12) 5/8" Rd
Loc: BS-2
360.Contents of (28) Collets (Some with Pushers) on Shelf for 1-1/4" Acme, Including: (6) 7/16" Hex, (6) 1/4" Rd, (6) 3/8" Rd and (10) 7/16" Rd
Loc: BS-3
361.Contents of (17) Collets (Some with Pushers) on Shelf for 1-1/4" Acme, Including: (8) 9/16" Rd, (7) 5/8" Rd and (2) 13/16" Rd
Loc: BS-3
362.Contents of (25) Collets (Some with Pushers) on Shelf for 1-1/4" Acme, Including: (5) 7/8" Rd, (6) 15/16" Rd, (7) 1" Rd, (6)1-1/16" Rd and (1) 1-1/8" Rd
Loc: BS-3
363.(18) Assorted RPM Gears for 9/16" & 1" Acme, Including Sizes Between 20 & 60 Teeth
Loc: BS-12
364.Slitters Model 62-105 Shave Tool Holder for 1-5/8" 6-Spindle Acme
Loc: T-10
365.Criterion Model S3 Adjustable Boring Head on 2-1/2" Diameter Shank
Loc: T-10
366.(8) Assorted Sets of RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 56/48, 68/46, 60/44, 50/54, 52/52, 62/42, 64/40 and 66/38
Loc: T-9
367.(4) Assorted 2" Diameter Shank Tool Holders, Including: (2) Collet Holders and (2) Ziegler Floating Tool Holders
Loc: T-10
368.(2) Assorted Ziegler Floating Type Tool Holders on 2" Diameter Shank
Loc: T-10
369.(3) Assorted Straight Shank Collet Holders on 2" Diameter Shank
Loc: T-10
370.Set of (6) Hardinge Model S-26 Master Collets for 2-5/8" Acme
Loc: T-10
371.(3) Assorted Sets of RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 66/38, 60/44 and 50/54
Loc: T-9
372.Slitter Model 62-7 Shave Tool Holder, 3/4" to 2" Capacity with 4th Position Block for 2-5/8" Acme
Loc: T-10
373.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 78/26, 76/28, 66/38, 64/40, 58/46 and 54/50
Loc: T-14
374.(6) Assorted Flat Form Tool Holders for 2-5/8" Acme, Including: (3) FF-64 4th Position, (2) FF-65 4th Position and (1) FF-56 1&2 Position
Loc: T-13
375.(5) Assorted Flat Form Tool Holders for 2-5/8" RB8, Including: (2) FF-62 7&8 Position and (3) FF-60 1&2 Position
Loc: T-13
376.Criterion Model S-3E Adjustable Boring Head on 2-1/2" Shank
Loc: T-10
377.Draw Back Style Recess Tool Holder No. 983571, 1" Tool Shank
Loc: T-13
378.(10) Assorted Knee Turners for 2-5/8" Acme with Flat End Slide
Loc: T-15
379.(10) Assorted Knee Turners for 2-5/8" Acme with Flat End Slide
Loc: T-15
380.(10) Assorted Knee Turners and Roll Supports for 2" & 2-5/8" Acme and (1) Manchester Type Cut Off Tool Holder
Loc: T-15
381.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 80/24, 76/28, 50/54, 56/48, 46/58 and 72/32
Loc: T-10
382.(5) Assorted BT35 ER16 Collet Holder, (3) Command B3C4-0016, (2) Make Unknown.
Loc: CNC
383.(10) BT35 Collet Type Tool Holders.
Loc: CNC
384.Tapmatic p/n 23958 BT35 Taper Holder with Adjustable Boring Head.
Loc: CNC
385.(5) BT35 Collet Type Tool Holders.
Loc: CNC
386.(10) Assorted BT35 Endmill Holders (Some Command), Sizes up to 3/4".
Loc: CNC
387.(12) Assorted BT35 Toolholders.
Loc: CNC
388.Box of Allen Wrenches.
Loc: CNC
389.(20) 1-3/8" Collet Pads.
Loc: T-7
391.Hand Pump for 55 Gallon Drum, Model HS-25.
392.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 64/40, 78/26, 64/40, 74/30, 72/32 and 70/34
Loc: T-11
393.Slitters Model 4-47A Box Tool for Flat End Slide
Loc: T-13
394.(24) 1-15/16" Collet Pads.
Loc: T-7
395.Approx. (70) 1-1/4" Dovetail Cutters.
Loc: T-1
396.Approx. (30) 3/4" Dovetail Cutters.
Loc: T-1
397.Approx. (50) Assorted 1-1/2" Dovetail Cutters.
Loc: T-1
398.Approx. (85) Assorted 1" Dovetail Cutters.
Loc: T-1
399.Approx. (70) 1-1/4" Dovetail Cutters.
Loc: T-10
400.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Flat End Slide, Spindle Speeds: 302 to 2,370 RPM, Universal Chip Conveyor, Stock Reel & Stand, 20 HP, Three Phase Motor and Controls, s/n 71335-B, Approx: 153" x 44" x 105" and 13,500 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

401.Approx (10) Sets of Cams for Primarly RB 2-5/8" Acme
Loc: T-14
402.(27) Drawer Tooling Cabinet. Includes Contents Consisting of Assorted Drill Bits and Carbide Tipped Tools Bits. Dimensions: 30-1/2"x 13-1/2"x 37".
Loc: BS-12
403.(9) Assorted Flat Form Tool Holders for RB-6 2-5/8" Acme
Loc: T-15
404.8" Machine Vice, 10"x 21"x 6" .
Loc: T-9
405.Brown & Sharpe No. 2 "Ultramatic" Single Spindle Auomatic Screw Machine, 1-5/8" Bar Capacity, 6-Position Turret with 1" Diameter Holes, s/n 542-2-8036-1 5/8, Approx: 84" x 44" x 70"

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.
Loc: CNC

406.(10) Assorted Flat Form Tool Holders for Primarly 2-5/8" and Larger Acme's
Loc: T-15
407.(9) Assorted Tools for RA-6 2-5/8" Acme, Including: (3) Flat Form, (5) 1-1/4" Dovetail and (1) 5/8" Dovetail
Loc: T-15
408.(10) Assorted Cut Off Cams for 1-1/4" Acme
409.(6) Assorted Cut Off Cams
410.(11) Assorted End Slide Tools For 1-1/4" Acme with Humpback End Slide, Including: (10) Assorted Knee Turners and (1) RS-26 Roll Support
Loc: BS-9
411.(4) Assorted End Slide Tools for 1-1/4" Acme with Flat End Slide, Including: (2) Box Tools, (1) Roll Support and (1) Recess Tool with 3/4" Tool Shank
Loc: BS-10
413.Assorted Tooling for 1-1/4" Acme, Including: (1) FDD-10 Double Deck Dovetail Tool Holder, (1) High Block Dovetail Tool Holder, (1) Low Block Dovetail Tool Holder and (3) Assorted Flat Form Tool Holders
Loc: BS-9
414.Assorted Tooling for 1-1/4" Acme, Including: (1) Double Deck Dovetail Tool Holder, (3) Assorted 1-1/4" Dovetail Tool Holders and (3) Assorted Flat Form Tool Holders
Loc: BS-8
415.(2) Double Deck Flat Form Tool Holders for 1-1/4" Acme
Loc: BS-8
416.Assorted Tooling for 1-1/4" Acme, Including: (8) Flat Form Tool Holders, (4) Dovetail Tool Holders and Adjustment Plates
Loc: BS-8
417.Partial .626-.750 Minus pin Gage Set.
Loc: INS
418.Aerospace Model 111-811 6" Digital Caliper, .00005" Resolution, s/n: 060194
Loc: INS
419.(2) Mitutoyo No. 122-125 Blade Micrometers, .0001".
Loc: INS
420.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 302 to 2,370 RPM, Universal Chip Conveyor, Stock Reel & Stand, 25 HP, Three Phase Motor and Controls, s/n 71959, Approx: 160" x 44" x 91" and 13,500 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

421.Meyer Model M-2 .251-.500 Minus Pin Gage Set (Partial)
Loc: INS
422.(4) Assorted Micrometers Including: (1) Mitutoyo 103-178, (1) Brown and Sharpe 1-2" and (2) Unknown Maker 0-1".
Loc: INS
423.Assorted Inspection Including: Intertes No. 73, 1.2-2.0" Inside Dial Caliper, (1) Brown and Sharpe Depth Gage.
Loc: INS
424.(2) Mitutoyo Micrometers. (1) no. 103-180, 3-4", .001" and (1) No. 103-179, 2-3", .001".0
Loc: INS
425.Brown & Sharpe No. 2 Single Spindle Auomatic Screw Machine, 1-1/4" Bar Capacity, 6-Position Turret with 1" Diameter Holes, s/n 542-2-6885-1-1/4, Approx: 89" x 39" x 70"

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.
Loc: CNC

425A.Arboga/Prab Chip Processing System, Including: (1) Langley 1,000 Lb Capacity Tote Elevator/Tipper for 29-1/2" x 43" Chip Totes, (1) Arboga Type KB-20 Chip Grinder, 39-1/2" x 39-1/2" Opening, s/n KB397, (1) Prab Incline Chip Conveyor, 13" Wide x Approx 18', 11'6" Top Conveyor Height, (1) Centrifugal & Mechanical Industries Size CW20 Chip Wringer, (1) Adjustable Wet Chip Discharge Chute, (1) Prab Incline Exit Conveyor for Processed Chips, Approx 8' Tall
426.Starrett No. 216 1-2" Analog Micrometer.
427.(3) Assorted Dial Indicators Including: (1) Starrett No. 25-441, .001", (1) Mitutoyo No. 2802-10, .0001"- .025" and (1) Federal No. C71, .0005".
Loc: INS
428.(2) 0-1" Indicating Micrometers. (1) Mahr No. 40SF and (1) Fowler.
Loc: INS
429.Meyer Model M-2 .251-.500 Minus Pin Gage Set (Partial)
Loc: INS
430.(3) Assorted Micrometers. (1) Starrett No. 3, 0-1", (1) 2-3" and (1) 0-1".
Loc: INS
430A.Snow Model DR-1 Single Spindle Taper, 7-1/4" Throat, 18" x 10-3/8" Table, 8-Speeds: 950 to 6,750 RPM, Adjustable Table Height, s/n 33680-1, Approx: 24" x 31" x 67"

Location: Glenwood, MN

431.(6) Assorted Snap Gages Including: Standard Gage Company, Pratt and Whitney, Sheffield and More.
Loc: INS
432.(2) starrett No. 445 Depth Micrometers
Loc: INS
433.(2) Quicktest Inside Dial Caliper. (1) .80-1.20", .001" and (1) 1.20-1.60", 2-3", .001"
Loc: INS
434.Fowler 1-2" Pressure Micrometer, .0001"
Loc: INS
435.Assorted Inspection Including: (2) Unknown Maker 0-1" Micrometers, (1) intertest No. 71 Inside Dial Caliper, .001", (1) Mitutoyo No. 126-137 Screw Thread Micrometer with Interchangeable Anvils and More.
Loc: INS
436.Large Group of Assorted Pin Gages. Sizes up to Approx 1".
Loc: INS
437.(3) Warner Swasey Floating Tool Holders. (1) M-4384, 1" (1) M-254-51, 1-5/8" and (1) M-1464, 1-1/2".
Loc: CNC
438.Large Group of Assorted Pin Gages. Sizes up to Approx. 1/2"
Loc: INS
439.The National Acme Co. 13/16" Threading Head with 1-1/2" Shank Dia.
Loc: CNC
440.(7) Assorted 5C Collets
Loc: CNC
441.(7) Custom Solid Carbide Cutting Tools. Sizes up to 6" x 3/4".
Loc: CNC
442.29" x 34" x 13" Shop Cabinet with Contents.
Loc: CNC
443.Clausing Model 1686 Single Spindle Drill Press, 7-1/2" Throat, 17-7/8" x 12" Table, Variable Spindle Speeds: 330 to 4,000 RPM, No. 2 Morse Taper Spindle, 1/2" Capacity Drill Chuck, Three Phase, s/n 517459
Loc: CNC
444.25" x 12" x 72" Wood Shelf with Assorted Machine Parts, Tooling and More as Shown.
Loc: CNC
445.Brown & Sharpe No. 2G Single Spindle Auomatic Screw Machine, 1-1/2" Bar Capacity, 6-Position Turret with 1" Diameter Holes, s/n 542-2-1488, Approx: 69" x 37" x 60"

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.
Loc: CNC

446.(7) Assorted Floating Type Tool Holders Including: Glenco 3/4", 1", 11/16" and More.
Loc: CNC
447.Cross Slide Radius Cutter, Approx. 3-3/4" Dovetail Mount, Approx. 1/4" Tool Hole.
Loc: CNC
448.Snow model 3-UT Tapping Machine. 7-1/2" Throat, 16-1/2" x 10-1/2" Table, 1 hp, 220 volt, 3-Phase, s/n: 19665, Approx. 21" x 28" x 68" (Note: Appears to need Repair)

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

449.Flatbed Stock Cart, 56" x 26" x 17".
450.Acme Gridley Model RB-6 Automatic Screw Machine, 1-5/8" Capacity, 6-Spindles, Collet Capacities: 1-5/8" Round, 1-9/64" Square, and 1-13/32" Hexagon, 10" Maximum Stock Feed Length, 7" Maximum Turning Length, Flat End Slide, Spindle Speeds: 152 to 1,640 RPM, Auger Type Chip Conveyor, Stock Reel & Stand, Approx 25 HP, Three Phase Motor and Controls, s/n 41730, Approx: 175" x 50" x 93" with 10' Reel and 27,000 Lbs

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

451.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 60/44, 54/50, 52/52, 62/42, 66/38 and 74/30
Loc: T-10
452.Approx (12) Sets of Cams for Primarly RB 2-5/8" Acme
Loc: T-14
453.Double Deck Dovetail Tool Holder Model FDD-31 and FDA-31 Dovetail Tool Holder for 2-5/8" Acme
Loc: T-15
454.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 76/28, 72/32, 68/36, 64/40, 58/46 and 54/50
Loc: T-14
455.Double Deck Dovetail Tool Holder Model FDD-31 for 1st Position on 2-5/8" Acme
Loc: T-14
456.Rol-Air Vertical Receiver Tank, Approx. 60 gal., Overall Dimensions: 28"x 24"x 62".
457.Transformer, Model DT-3, 3 Phase, 60hz, Cat. No. 302-415, Dimensions: 20"x 14-1/2"x 30", 239lbs.
458.Double Deck Dovetail Tool Holder for 2-5/8" Acme
Loc: T-14
459.(2) Work Lights with Clamps.
Loc: T-5
460.(2) Assorted Flat Form Tool Holders with Cut-Off Tools for Acme's
Loc: T-15
461.(20) Assorted RPM Gears for 9/16" & 1" Acme, Including Sizes Between 24 & 56 Teeth
Loc: BS-12
462.(7) Assorted Sets of Feed Gears for 1-1/4" Acme, Including: (3) 48/52, 40/60, 44/56 and (2) 38/62
Loc: BS-12
463.RPM and Feed Gears for 1-5/8" - 2-5/8" Acme. Includes: (5) 58T, (2) 44T, (3) 42T, 40T, and 38T.
Loc: T-6
464.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 70/34, 68/36, 66/38, 64/40, 58/46 and 54/50
Loc: T-14
465.(7) Assorted Sets of RPM Gears for 1-1/4" Acme, Including: 56/20, 22/54, 52/24, 26/50, 28/48, 38/38 and 36/40
Loc: BS-12
466.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 50/54, 60/44, 64/40, 66/38, 70/34 and 74/30
Loc: T-11
467.(16) Assorted Feed Gears for 1-1/4" Acme with Sizes Between 36 and 74
Loc: BS-10
468.(8) Assorted Sets of RPM Gears for 1-1/4" Acme, Including: 56/20, (3) 54/22, 52/24, 50/26 and (5) Other Gears
Loc: BS-10
469.RPM and Feed Gears for 1-5/8" - 2-5/8" Acme. Includes: 52T, 60 LH, 68 LH, 58 LH, 70 LH, and 64L.
Loc: T-13
470.(7) Assorted Tool Holders for 1-1/4" Acme, Including: (3) High Block 1-1/4" Dovetail Holders and (4) Flat Form Tool Holders
Loc: BS-10
471.(10) Assorted Tool Holders for 2-5/8" Acme, Including: (3) 1-1/4" Dovetail Holders and (7) Flat Form Tool Holders
Loc: BS-10
472.Double Deck Dovetail Tool Holder for 2-5/8" Acme with 1-1/4" Dovetail
Loc: BS-10
473.Double Deck Dovetail Tool Holder for 2-5/8" Acme with 1-1/4" Dovetail, 1st Position
Loc: BS-10
474.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 54/50, 56/48, 58/46, 60/44, 68/36 and 72/32
Loc: T-14
476.RPM and Feed Gears for 1-5/8" - 2-5/8" Acme. Includes: 80T,(3) 52T, 48T, 38T, 34T, 32T,28T, & 26T.
Loc: T-6
477.Slater Tools 1-1/4" Capacity Shave Tool Holder with 71-505 Shave Block
Loc: BS-14
478.RPM and Feed Gears for 1-5/8" - 2-5/8" Acme. Includes: (3) 54T, 52T, (5) 48T, and (3) 42T.
Loc: T-6
479.RPM and Feed Gears for 1-5/8" - 2-5/8" Acme. Includes: (3) 68T, (2) 66T, 54T, 50T, (2) 40T, and (3)38T.
Loc: T-6
480.RPM and Feed Gears for 3-1/2" Acme. Includes: 42T, 48T, and 56T.
Loc: T-13
481.(6) Sets of Assorted RPM & Feed Gears for 1-5/8" & 2-5/8" Acme, Including: 80/24, 76/28, 74/30, 70/34, 68/36 and 66/38
Loc: T-14
482.(2) Assorted Slitter and Slitter Type Shave Tool Holders, Model 62-5, 0 to 1-1/4" Capacity with 71-36 Shave Blocks
Loc: BS-7
483.Assorted 9/16" & 1" Acme Tooling, Including: (1) 62-62H Shave Tool Holder, 1" Capacity with 71-10 Shave Block and (4) Assorted Flat Form Tool Holders
Loc: BS-7
484.(2) Ziegler 1" Floating Straight Shank Tool Holders with 2" Diameter Shank
Loc: BS-14
485.Shave Tool Holder Model 62-4, 1" Capacity with (2) 71-36 Shave Blocks
Loc: BS-14
486.Double Deck Dovetail Tool Holder Model FDD-21 for 1-5/8" & 2" Acme, 1st Position
Loc: BS-14
487.(3) Ziegler 1" Floating Straight Shank Tool Holders with 2" Diameter Shank
Loc: BS-10
488.(4) Assorted Drill Chucks on 2" Diameter Bushings, Including: (1) 5/8" and (3) 1/2" Capacity
Loc: BS-10
489.Landis Model Landmatic 7/8 Threading Die Head on 1-1/2" Shank
Loc: BS-14
490.(4) Assorted Straight Shank Collet Holders on 1-1/2" to 2" Diameter Shanks
Loc: BS-10
491.(4) Assorted Straight Shank Collet Holders for Acorn Type Collets with Shanks up to 2" Diameter, (1) Live Center on 1-1/2" Shank and (1) Ratchet Type Holder for 1" Tool Shank
Loc: BS-10
492.(3) Assorted Large DA-TypeStraight Shank Collet Holders, Including: (2) 2-1/2" Diameter Shanks and (1) 1-3/4" Diameter Shank
Loc: BS-10
493.(5) Assorted Kennametal and Kennametal Type Straight Shank Collet Holders for DA400 Series Collets, 2" Diameter Shanks
Loc: BS-10
494.(5) Assorted Acorn Type Straight Shank Collet Holders on 1-1/2" Diameter Shanks
Loc: BS-10
495.(4) Assorted Ziegler Floating Tool Holders, Including: (1) 1-1/8" on 2" Diameter Shank, (1) 1" on 1-1/2" Diameter Shank, (1) 1" on 2" Diameter Shank and (1) 3/4" on 1-1/2" Diameter Shank
Loc: BS-10
496.(7) Assorted Straight Shank Collet Holders for DA400 Collets on Shanks up to 2" Diameter Shanks
Loc: BS-10
497.(5) Assorted Tool Holders for 1-5/8" Acme, Including: (2) 6th Position 1-1/4" Dovetail Holders, (1) 39-29 1-1/4" Dovetail Holder and (2) Assorted Flat Form Tool Holders
Loc: BS-10
498.Slitter Model 69-4 Double Deck Dovetail Tool Holder for 1-5/8" Acme, 1st Position
Loc: BS-10
499.Slitter Type Double Deck Dovetail Tool Holder for 1-5/8" Acme
Loc: BS-10
500.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 302 to 2,370 RPM, Stock Reel & Stand, Stock Depletion, Pick Off (No Back Finishing) 25 HP, Three Phase Motor and Controls, s/n 71313-A, (Rebuilt in 1980) Approx: 147" x 47" x 105" with 12' Reel and 13,500 Lbs

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

501.Rolling Chip Hopper, Approx. 29" x 42" x 24". (Contents NOT Included)
502.24"x 62" x 11" Wood Shelf with Assorted Vise Jaws, Motly 6" (Some Aluminum)
Loc: CNC
503.Reid Model 2-2 Surface Grinder. 18" x 6" Permanent Magnetic Chuck, 8" Max Wheel Capacity, 3-Phase, 52" x 42" x 74".

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

504.Rolling Chip Hopper, Approx. 29" x 42" x 24". (Contents NOT Included)
505.Assorted Humpback End Slide Tooling for 1-1/4" Acme, Including: (2) Recess Tools, (1) Knurling Tool and (6) Assorted Knee Turners
Loc: BS-10
506.(10) Microcentric RS67 Collets. 1-1/2", 1-3/4", 1-7/8".
Loc: T-15
507.Metal Chip Cart. 28-1/2" x 47" x 33".
508.Jones and Lamson Model PC-14 Optical Comparator. 14" Screen Diameter, 18" x 6" Table, 30" x 50" x 70" Overall.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

509.Eastern machine Screw Co. Style D Size 1 Threading Head on 1-1/2" Shank.
Loc: T-15
510.Pair of 5-1/2" Dia. 2-Jaw Microcentric Chucks.
Loc: T-15
511.(8) Insert Type Cutting Tools Including: (3) Madison 2206-005-00625, (1) Madison 2212-505-00875, (4) Marked "T-55956", 1" Shank Diameter.
Loc: T-15
512.Rolling Chip Hopper, Approx. 29" x 42" x 24". (Contents NOT Included)
513.Metal Chip Cart. 28-1/2" x 47" x 33".
514.Metal Chip Cart. 28-1/2" x 47" x 33".
515.Assorted Collet Pads Including: 17/32", 9/16", 2-1/4", 1/2" and More.
Loc: BS-7
516.(2) Assorted Reaming Attachments believed to be for 9/16" or 1" Acme
Loc: BS-10
517.(9) Assorted Flat End Slide Knee Turners Primarly for 2-5/8" Acme
Loc: BS-12
518.(3) Assorted Shave Tool Holders, Including: (2) 62-5 with 1-1/4" Capacity and (1) 62-4H, 1" Capacity with 71-64 Shave Block
Loc: BS-10
519.(2) Assorted Shave Tool Holders, Including: (1) 62-5, 1-1/4" Capacity with 71-64 Shave Block and (1) 62-4H, 1" Capacity with 71-36 Shave Block
Loc: BS-13
520.Group of Assorted HSS Reamers, Drill Bits. Sizes up to 1-1/2" Dia.
Loc: T-15
521.Snow Model TA1 Tapping Machine. Size 1 Tapping Head, 0-1/4" Capacity, 25-1/2" x 10-1/2" Table, 1/2 hp, 440/3-Phase, s/n: M40454, Approx. 31" x 32" x 66".

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

522.(6) Hardinge 2-5/8" Master Collet Bases for Flex Collet Heads.
Loc: T-15
523.(12) Hardinge Flex Collet Heads for 2-5/8" acme, 1-3/16", 1-1/4"
Loc: T-15
524.Continental Model DPF-24-1000 Floor Standing Drill Press. #3 MT Spindle, 12" Throat, 1" capacity, 16" x 15" Table, 1 hp, 208-220/440 volt, 3-Phase, s/n: 911010, Approx. 20" x 36" x 72" Overall.
525.Acme Gridley Model RB-6 Automatic Screw Machine, 1-5/8" Capacity, 6-Spindles, Collet Capacities: 1-5/8" Round, 1-9/64" Square, and 1-13/32" Hexagon, 10" Maximum Stock Feed Length, 7" Maximum Turning Length, Flat End Slide, Spindle Speeds: 152 to 1,640 RPM, Mechanical Chip Conveyor, Stock Reel & Stand, 20 HP, Three Phase Motor and Controls, s/n 41767, Approx: 27,000 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

526.Federal Auto Recess Tool for Flat End Slide, 3/4" Keyway
Loc: BS-14
527.(20) Microcentric RS67 Collets. 7/8", 1-1/4", 1-1/2".
Loc: T-15
528.(15) Hardinge Pushers for 2-5/8" Acme. Sizes up to 2-5/8" Round and 1-3/4" Hex.
Loc: T-15
529.(5) New Namco Collets for 2-5/8" Acme, 5/8" Hex
Loc: CNC
530.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 302 to 2,370 RPM, Paddle Type Chip Conveyor, Stock Reel & Stand, 25 HP, Three Phase Motor and Controls, s/n 71381-A, Approx: 139" x 44" x 93" and 13,500 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

531.(9) Assorted Master Collets for 2-5/8" Acme
Loc: CNC
532.(24) Assorted Collets for 2-5/8" Acme (Some with Pushers), Including: (6) 1" Rd, (12) Baruk F-1733 Cone Type and (6) Other Baruk Cone Type
Loc: BS-5
533.(20) Assorted Collets for 2-5/8" Acme (Some with Pushers), Including: (7) 2-7/16" Rd, (7) 2-9/16" Rd and (6) 2-5/8" Rd
Loc: BS-6
534.(15) Assorted Collets for 2-5/8" Acme (Some with Pushers), Including: (3) 2" Rd, (7) 2-1/4" Rd and (5) 2-11/16"
Loc: BS-6
535.(4) Erickson #400 Straight Shank Collet Holders. 1-3/4" Shank Dia.
Loc: T-15
536.(7) Assorted Straight Shank Collet and Tool Holders. 2" Shank Dia.
Loc: T-15
537.(12) Hardinge Flex Collet Heads for 2-5/8" acme, 1-7/8"
538.(12) Hardinge Flex Collet Heads for 2-5/8" Acme. 1" and 1-1/8".
Loc: T-15
539.Rolling Chip Hopper, Approx. 29" x 42" x 24". (Contents NOT Included)
541.Clausing Model 1763 Single Spindle Drill Press, 7-1/2" Throat, 17-7/8" x 12" Plain Table, 10-Belted Speeds: 260 to 5,400 RPM, with Clausing Model 1617 Pneumatic Feed Attachment, Three Phase, s/n 124999
542.(10) Microcentric RS67 2-1/4" Collets.
Loc: T-15
543.(12) Hardinge Flex Collet Heads for 2-5/8" Acme. 2-3/16" and 1-1/2".
Loc: T-15
544.Metal Chip Cart. 28-1/2" x 47" x 33".
545.Metal Chip Cart. 28-1/2" x 47" x 33".
546.Metal Chip Cart. 28-1/2" x 47" x 33".
547.Metal Chip Cart. 28-1/2" x 47" x 33".
548.Metal Chip Cart. 28-1/2" x 47" x 33".
549.Metal Chip Cart. 28-1/2" x 47" x 33".
550.Acme Gridley Model RB-6 Automatic Screw Machine, 3-1/2" Capacity, 6-Spindles, Collet Capacities: 3-1/2" Round, 2-15/32" Square, and 3-1/32" Hexagon, 9" Maximum Stock Feed Length, 8" Maximum Turning Length, Flat End Slide, Spindle Speeds: 82 to 471 RPM, Auxillary Slides on 4th & 5th Position, Auger Type Chip Conveyor, Stock Reel & Stand, Approx 40 HP, Three Phase Motor and Controls, s/n 94760, Approx: 198" x 55" x 107" and 34,700 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

551.(8) Erickson #400 Straight Shank Collet Holders. 2" Shank Dia.
Loc: T-15
552.(7) Erickson #400 Straight Shank Collet Holders. 2" Shank Dia.
Loc: T-15
553.(11) Assorted Cutoff Tool Holders.
554.(17) Assorted Cutoff Tool Holders.
Loc: T-15
555.(9) Assorted Straight Shank Tool and Collet Holders. 1-3/4", 2", 2-1/2", 3" Shanks.
Loc: T-15
556.(6) Boring Bars. (1) BB-3200 Adjustable Boring Head on 2-1/2" Shank, Others from 1-1/2" to 2-1/2" Shank Dia.
Loc: T-15
557.(7) Assorted Cutoff Tool Holders. Some Empire Tool.
Loc: T-15
558.(12) Hardinge Flex Collet Heads for 2-5/8" Acme. 1-3/4" Hex, 1-3/8" Round.
Loc: T-15
559.(12) Assorted Cutoff Tool Holders. Some Empire Tool.
Loc: T-15
560.Hardinge Model DSM-59 Second Operation Lathe. 9" Swing Over Bed, 28" Bed Length, 1 1/4" Hole Thru Spindle, 5C Collet Closer, Gusher Coolant Pump, 1HP 220 Volt 3-Phase Motor and Controls, s/n: NA. Approx 68"x30"x59" and 1,500 lbs.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

561.(11) Hardinge Flex Collet Heads for 2-5/8" Acme. 2-1/4" Round, 1-1/4" Hex.
Loc: T-15
562.(12) Hardinge Flex Collet Heads for 2-5/8" Acme. 1-5/8" and 2-5/8"
Loc: T-15
563.Rolling Chip Hopper, Approx. 29" x 42" x 24". (Contents NOT Included)
564.(9) Hardinge Flex Collet Heads for 2-5/8" Acme, 1-1/2" Hex, 1-1/2" Round.
Loc: T-15
565.Double Deck Flat Form Tool Holder for 3-1/2" Acme
Loc: T-14
566.Large Group of Round and Hex Spacers for 2-5/8" Acme.
Loc: T-15
567.(11) Assorted Cutoff Tool Holders. Some Empire Tool.
Loc: T-15
568.(7) Assorted Cutoff Tool Holders including: Manchester, Empire Tool.
Loc: T-15
569.(7) Manchester and Manchester Type Cutoff Tool Holders Including: 206-322, 206-323 and More.
Loc: T-15
570.Pair of 5-1/2" Dia. 2-Jaw Microcentric Chucks.
Loc: T-15
571.Reed Model B36 Thread Roll Attachment, s/n:2792.
Loc: T-15
572.National Acme Co. Model C-5310-D 6-1/2" 3-Jaw Microcentric Chuck.
Loc: T-15
573.Geometric Threading Head Stamped "1-1/2 KD No.C46127A" on 2-3/4" Shank.
Loc: T-15
574.24-Drawer Shop Cabinet, Approx. 73" x 28" x 48". Contents NOT Included.
Loc: T-15
575.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Falt End Slide, Spindle Speeds: 302 to 2,370 RPM, Auger Type Chip Conveyor, Stock Reel & Stand, 25 HP, Three Phase Motor and Controls, s/n 71529-A, Approx: 13,500 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

576.Metal Shop Cart with Contents of Assorted Hold Down Hardware, Fasteners and More. 36" x 18" x 47".
Loc: T-15
577.Large Group of MT Drill Bushings.
Loc: T-13
578.Approx. (29) Insert Type Square Shank Turning Tools Including: Sandvik MSDNN 16 4D, CTFPR 164, CTFPR 164D, SEP-64A, CSDPN-85-6 and More.
Loc: T-11
579.Approx. (72) HSS Taps up to 1-5/16-12.
Loc: T-11
580.Pair of 5-1/2" Dia. 2-Jaw Microcentric Chucks.
Loc: T-15
581.Metal Chip Cart. 28-1/2" x 47" x 33".
582.Metal Chip Cart. 28-1/2" x 47" x 33".
583.Metal Chip Cart. 28-1/2" x 47" x 33".
584.(8) Assorted Collets for 2-5/8" Acme (Some with Pushers), Including: (2) Master Collets and (6) 1-5/8" Rd with Pushers
Loc: BS-6
585.Rolling Chip Hopper, Approx. 29" x 42" x 24". (Contents NOT Included)
586.Approx (35) Assorted Pusher Collets for 2-5/8" Acme, Including: (11) 1-5/8" Rd, (7) 1-1/4" Rd, (5) 1-5/16" Rd, (6) 1-1/4" Hex and (6) 1-9/16" Rd
Loc: BS-6
587.Large Capacity DA Type Straight Shank Collet Holders on 2-1/2" Shank
Loc: CNC
588.Clausing Model 1686 Drill Press on Gang Type Table, 30" x 20" table Size, 7-1/2" Throat, #2 MT Spindle, 330-4000 rpm, s/n: 517458, Approx. 36" x 32" x 72" Overall.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

589.Contents of 2-Shelves, Including Assorted Collets and Pushers for 2-5/8" Acme, Including: (5) 1.654" Rd, (6) 1.8025" Rd, (1) 5/8" Hex Collet, (1) Master Collet, (29) Master Pushers and (5) 2-1/4" Hex Pushers
Loc: BS-6
590.Huge Group of Assorted HSS Taps and Drill Bits.
Loc: BS-1
591.Approx (33) Pushers for 2-5/8" Acme, Primarly 2-1/2" Rd
Loc: BS-5
592.Metal Chip Cart. 28-1/2" x 47" x 33".
593.Approx (38) Assorted Pushers for 2-5/8" Acme, Including: (8) 2-9/16" Rd, (16) 2-7/16" Rd, (4) 2-3/8" and (10) Others
Loc: BS-5
594.Approx (38) Assorted Pushers for 2-5/8" Acme, Including: (16) 2-1/4" Rd, (6) 2-1/16" Rd, (3) 2-1/8" Hex, (1) 2-1/8" Rd, (6) 1-7/8" Rd and (6) 1-15/16" Rd
Loc: BS-5
595.Approx (23) Assorted Pushers for 2-5/8" Acme, Including: 1-13/16" Rd, (1) Master, (7) 1-3/4" Rd Spiral and (5) 1-11/16" Rd and 3) Others
Loc: BS-5
596.Metal Chip Cart. 28-1/2" x 47" x 33".
597.Metal Chip Cart. 28-1/2" x 47" x 33".
598.Metal Chip Cart. 28-1/2" x 47" x 33".
599.Approx (48) Assorted Pushers for 2-5/8" Acme, Including: (5) 1-1/2" Rd, (5) 1-1/2" Hex, (6) 1-7/16" Rd, (10) 1-3/8" Rd, (6) 1-9/32" Rd, (6) 2-1/4" Hex and (8) Other
Loc: BS-5
600.Acme Gridley Model RA-6 Automatic Screw Machine, 1-5/8" Capacity, 6-Spindles, Collet Capacities: 1-5/8" Round, 1-9/64" Square, and 1-13/32" Hexagon, 10" Maximum Stock Feed Length, 7" Maximum Turning Length, Flat End Slide, Spindle Speeds: 152 to 1,640 RPM, Universal Chip Conveyor, Stock Reel & Stand, Approx 20 HP, Three Phase Motor and Controls, s/n 40760, Approx: 175" x 50" x 94" with 9' Reel and 23,200 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

601.(14) Assorted Carms for 3-1/2" Acme, Primarly Cross Slide Cams
Loc: BS-1
602.(14) Sets of Assorted Cross Slide Cams for 2-5/8" Acme
603.(16) Assorted Feed Gears for 1-1/4" Acme, Including: (3) 72, (2) 66, (3) 64, (2) 62, (1) 56, (1) 54, (1) 46, (1) 38, (1) 36 and (1) 34
Loc: CNC
604.(12) Assorted RPM Gears for 1-1/4" Acme, Including: 56, 52, 50, (2) 48, 46, 44, 39, 36, 30, 26 and 24
Loc: CNC
605.(12) Assorted Change Gears for 2-5/8" Acme, Including: 68/36, 60/44, (2) 56/48, 54, 40, 32 and 30
606.(22) Assorted Change Gears for Variety of Acme Screw Machines with Sizes up to 70
Loc: CNC
607.(6) Assorted Flat End Slide Tools for 1-5/8" & 2" Acme's, Including: (2) RS-41 Roll Supports, (1) 1st Position Roll Support, (1) 6th Position Roll Support, (1) RS-42 Roll Support and (1) Knee Turner
Loc: CNC
608.(10) Assorted Flat End Slide Tools, Primarly for 2-5/8" Acme, Including: (3) 3rd Position Roll Supports, (2) RSS-81 Roll Supports, (3) Box Tools and (2) Knee Turners
Loc: CNC
609.(3) Assorted Slater Flat End Slide Tools, Including: (2) Box Tools and (1) Roll Support, Believed to be for 2-5/8" Acme
Loc: CNC
610.Dove Tail Type Shave Tool Holder, Approx 1" Capacity
Loc: BS-14
611.(2) Salvo Tool Model CBL Threading Attachments, (1) With Head Block
Loc: CNC
612.(5) Assorted Ortman Pneumatic Cylinders with Strokes up to 1-3/4", (2) w/ Adapter Plates
Loc: CNC
613.Approx (31) Assorted Pushers for 2-5/8" Acme, Including: (3) 41/64" Rd, (6) 7/8" Rd, (5) 5/16" and (17) 2-1/2"
Loc: BS-4
614.Shelf of Assorted Spacers up to 3-1/2"
Loc: BS-4
615.Shelf of Assorted Spacers up to 2-1/4"
Loc: BS-4
616.(36) Assorted Collets for 1-1/4" Acme, Including: (7) 1-1/4" Rd, (9) 1-3/16" Rd, (7) 17/64" Rd and (13) 0.990" Rd, Some with Pushers
Loc: BS-3
617.Approx (44) Assorted Collets for 1-5/8" Acme, Including: (23) Master Collets, (8) 9/16" Rd, (10) 5/8" Rd and (2) Other
Loc: BS-1
618.Approx (48) Assorted Collets (Most with Pushers) for 1-1/4" Acme, Including: (6) 1" Hex, (8) 1-1/16" Hex, (7) 1" Rd, (10) 1-1/8" Rd, (8) 1-1/4" Rd and (9) 1.062" Hex
Loc: BS-2
619.(13) Assorted Sets of Cams, Primarly for 2-5/8" Acme, Including: Guard, Cross Slide and More
Loc: BS-7
620.(17) Assorted Sets of Cams for 2-5/8" & 3-1/2" Acme's
Loc: BS-8
621.Salvo Model 2"-12 Thread Roll Attachment
Loc: BS-13
622.(7) Master Collets and Pushers for 1-5/8" Acme
Loc: BS-13
623.(12) Master Collets for 1-1/4" Acme
Loc: BS-12
624.(3) Assorted Boring Tools, Including: (1) Bokumatic on 3" Diameter Shank, (1) Bokumatic with 1" Stroke on 2" Diameter Shank and (1) with 1" Diameter Shank
Loc: BS-14
625.Tolhurst Size 26 Chip Wringer, 26" Diameter basket Size, 950 RPM Basket Speed, Foot Pedal, Three Phase, s/n T-18982
625A.Acme Gridley Model RA-6 Automatic Screw Machine, 1" Capacity, 6-Spindles, Collet Capacities: 1" Round, 45/64" Square, and 55/64" Hexagon, 5" Maximum Stock Feed Length, 5" Maximum Turning Length, Flat End Slide, Spindle Speeds: 289 to 2,383 RPM, Auger Style Chip Conveyor, Stock Reel & Stand, 15 HP, Three Phase Motor and Controls, s/n A23474, Approx: 99" x 42" x 96" and 11,300

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

626.(6) Assorted Knee Turners for 3-1/2" Acme with Flat End Slide
Loc: BS-12
627.Assorted Tooling for 1-5/8" 8-Spindle Acme, Including: (1) Double Deck Dovetail Tool Holder 1st Position and (1) 4th Position Flat Form Tool Holder, Both with Knurling Tools
Loc: BS-13
628.Double Deck Dove Tail Tool Holder Model FDD-126 for 1-5/8" 8-Spindle Acme
Loc: BS-13
629.Double Deck Dovetail Tool Holder Model FDD-31 for 2-5/8" Acme, 1st Position
Loc: BS-10
630.Double Deck Dovetail Tool Holder for 2-5/8" Acme, 1-1/4" Dovetail Size
Loc: BS-13
631.(4) Assorted Ziegler and Glenco Floating Tool Holders on 1-1/2" & 2" Diameter Shanks with Tool Shank Sizes to 1"
Loc: BS-13
632.Double Deck Dovetail Tool Holder for 9/16" Acme, with 5/8" Dovetail Size
Loc: BS-14
633.(3) Assorted Slitters Shave Tool Holders, Including: (2) 62-12 4" Capacity and (1) 62-104 with 1" Capacity
Loc: BS-13
634.Screw Machine Tool Co. Model 54-58 Recess Tool Holder, 5/8" Tool Shank Size
Loc: BS-14
635.Large Lot of Assorted Tooling, Including: (4) Drill Chucks up to 1/2", Ziegler Floating Tool Holders, Acorn Type Straight Shank Collet Holders, DA-Type Straight Shank Collet Holders, 5C Collet Bushing and More
Loc: BS-14
636.Approx (45) Assorted 1-5/8" Acme Collets, Including But Not Limited To: 1-1/4" Rd, 1-3/8" Hex, 1-5/16" Hex, 5/8" Rd, Masters and Large Assortment of Pushers
Loc: BS-9
637.Approx (72) Assorted Collets and Pushers for 2-5/8" Acme, Including: (3) 2-1/8" Collets, (1) 2-1/4" Collet, (2) Master Collets, (6) 1-1/8" Rd Pushers, (6) 1-1/8" Hex Pushers, (5) 1" Pushers, (5) 2-5/8" Pushers, (5) 1-3/16" Pushers, (5) 1-1/16" Pushers, (6) 1-3/8" Hex, (6) 2-1/8" Rd, (12) Master Type Pushers and (10) Others
Loc: BS-9
638.Approx (38) Assorted Collets for 1-1/4" Acme, Including But Not Limited To: 1-1/4" Rd, 1-1/8" Rd, 1-1/64" Rd and More with Assortment of Pushers
Loc: BS-15
639.(14) Assorted Collets for 2" Acme, Including: (6) 1-13/16" Rd (5-with Pushers) (4) 1" Rd, (3) 2" Rd and (1) 1-11/16" Rd
Loc: BS-7
640.Assorted Tooling for Variety of Acme Screw Machines, Including: (15) Fingers for 1-1/4" Acme, (5) Assorted Die Yokes, (4) Roller Fingers and (7) Finger Cams
Loc: BS-14
641.Double Deck Circular Tool Holder for 1-1/4" Acme
Loc: BS-14
642.Reed Model 1000G2A Thread Roll Attachment with 3/4" Keyway
Loc: BS-12
643.(4) Assorted Shave Tool Holders, Including: (1) 62-6 with 71-32 Shave Block, 1-5/8" Capacity, (1) 62-7 with 2" Capacity and Block and (2) with Approx 1" Capacity and Blocks
Loc: BS-14
644.(7) Assorted Tool Holders for 1-1/4" Acme, Including: (5) Flat Form Tool Holders and (2) Circular Type
Loc: BS-13
645.Assorted End Slide Tooling for 1-1/4" Acme, Including: (4) Box Tools and (1) Roll Support for Flat End Slide and (4) Roll Supports for Humpback End Slide
Loc: BS-13
646.Contents of Metal Shelf Including: Nuts, Bolts, Washers, Lock Washers, Allen Head Bolts and More.
Loc: BS-12
647.Large Lot of Assorted Collet Pads. 1-1/8", 1", 7/8", 1-7/16" and More.
Loc: BS-10
648.Group of Assorted Collet pads. 2-1/2", 2-1/4", 9/16", 1-3/16" and More.
Loc: BS-9
649.Large Group of Assorted Collet Pads. 1/2", 1-1/4", 3-1/8", 3-1/4" and More.
Loc: BS-8
650.Acme Gridley Model RA-6 Automatic Screw Machine, 9/16" Capacity, 6-Spindles, Collet Capacities: 9/16" Round, 25/64" Square, and 31/64" Hexagon, 5" Maximum Stock Feed Length, 5" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 321 to 2,895 RPM, Universal Chip Conveyor, Stock Reel & Stand, 7-1/2 HP, Three Phase Motor and Controls, s/n 22009-B, Approx: 120" x 54" x 91" (Not Including Stock Reel) and 11,100 Lbs

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

651. Metal Chip Cart. 30" x 59" x 28".
652. Metal Chip Cart. 28" x 47" x 33".
653. Metal Chip Cart. 30" x 48" x 36"
654.(19) HSS Taps. Sizes from 1-1/4-11 to 1-1/2-11-1/2.
Loc: T-11
655.(2) Geometric Threading Heads. (1) AS IS, (1) Landis "Landex" 1-1/4" and (1) Jones and Lamson Model 22-23.
Loc: T-12
656.Group of Assorted HSS Drillbits, Carbide Tipped Cutters, Reamers and More.
Loc: T-11
657.Assorted Drill Bushings.
Loc: T-11
658.(16) Hardinge Flex Collet Heads for 2-5/8" Acme. 1-5/6" Hex, 2-1/4" and 2-1/8" Round.
Loc: T-12
659.(5) Assorted Circular Cutting Tools with Stamping Dies.
Loc: T-10
660.(4) Pairs of Cams for Mostly 2-5/8" Acme. 3/4", 1/4", 5/16".
Loc: T-8
661.Box of Assorted Dovetail Cutters
Loc: CNC
662.Group of Assorted Carbide Tipped Square Shank Turning Tools.
Loc: CNC
663.(3) Assorted Tapping Heads Including: (1) Snow Size 3, 10-1/2 Capacity, (1) Procunier Size no.2, 1/2" Brass, 3/8" Cast, 5/16" Steel and (1) Procunier size no. 3, 3/4" Brass, 5/8" Cast, 1/2" Steel (As is)
Loc: T-12
664.Group of Assorted Dovetail Cutters. Mostly 1-1/4".
Loc: CNC
665.Group of Assorted Carbide Tipped Square Shank Turning Tools.
Loc: CNC
666.(5) Assorted Geometric Threading Heads Including: (2) Eastern Machine Screw Co. Style D Size 101, 3/4" Shank.
Loc: T-15
667.Large Group of Assorted Collet Pads.
Loc: CNC
668.Large Group of Assorted Collet Pads.
Loc: CNC
669.Group of Assorted Thread Chasers and Blocks. Sizes as Shown
Loc: T-12
670.(2) Kennametal KM50 Taper Milling Attachments with (21) KM50 Taper Tool holders.
Loc: CNC
671.Circular Cutting Tool with (8) Stamping Dies.
Loc: T-10
672.Metal Shop Cart with Contents of Assorted Fasteners, Pipe Fittings, Hold Down Hardware and More. 36" x 18" x 47".
Loc: T-15
673.(3) 5-1/2" 3-Jaw Microcentric Chucks.
Loc: T-15
674.Assorted HSS Drill bits up to 1-1/2" Dia. Straight Shank and MT # 2,3,4 Taper.
Loc: T-12
675.Group of Assorted Collet Pads.
Loc: T-12
675A.Almco Type Vibratory Finishing Mill, Approx 35" x 17" x 16" Urathane Lined Tub, 5 Hp, Three Phase, s/n na
676.Assorted Knurling Tool Holders with Hundreds of Knurling Dies.
Loc: T-11
677.(24) Somma Tool CO. Collet Pad Sets. Sizes as Shown.
Loc: T-12
678.Assorted Threading Head Parts and Thread Chasers.
Loc: T-12
679.(15) Collets for 1-5/8" Acme. 9/16", 1/2" Hex Sizes, Round up to 1-11/16".
Loc: BS-11
680.(15) Assorted Collets for 1-5/8" Acme. 1/2" and 15/16" Hex Sizes. 1-11/16" Round.
Loc: BS-11
681.(15) Collets for 1-1/4" Acme. 9/16" and 3/4" Hex Sizes, 1-7/64", 3/8", 1-1/32", 1-1-1/64" Round Sizes.
Loc: BS-11
682.(14) Collets for 1-5/8" Acme. Hex Sizes: 15/16", 1-1/4", 1-3/8". Round Sizes: 1-3/8", 1-9/16", 1-5/8", 1-21/32".
Loc: BS-11
683.(2) Kennametal KM50 Taper Milling Attachments with (24) KM50 Taper Tool holders.
Loc: CNC
684.(14) Collets for 1-1/4" Acme. Hex Sizes: 1.032". Round Sizes: 3/4", .990", .625" and More.
Loc: BS-11
685.(10) Assorted Collets for 1-5/8" Acme.
Loc: BS-11
686.Pair of 5-1/2" Dia. 2-Jaw Microcentric Chucks.
Loc: BS-14
687.(7) Hardinge S20 Collets. 1-1/4" Hex and 2" round.
Loc: BS-11
688.(32) Pushers, Mostly 1-5/8".
689.(32) Pushers, Mostly 1-5/8".
Loc: BS-11
690.(49) Pushers. Mostly 1-1/4".
Loc: BS-11
691.(49) Pushers. Mostly 1-1/4".
Loc: BS-11
692.(28) Pushers for 1-5/8" Acme.
Loc: BS-11
693.(32) Pushers for 1-5/8" Acme.
Loc: BS-11
694.(5) Drawer Cabinet with Contents as Shown.
Loc: T-2
695.Nutting Flat Bed Shop Cart.
696.Group of Tooling for Brown and Sharpe Single Spindle.
Loc: CNC
697.(32) Pushers for 1-1/2" and 1-5/8" Acme.
698.(2) Drawer Cabinet with Contents as Shown.
Loc: T-1
699.(32) Pushers for 1-5/8" Acme.
Loc: BS-11
700.Acme Gridley Model RA-6 Automatic Screw Machine, 1-5/8" Capacity, 6-Spindles, Collet Capacities: 1-5/8" Round, 1-9/64" Square, and 1-13/32" Hexagon, 10" Maximum Stock Feed Length, 7" Maximum Turning Length, Flat End Slide, Spindle Speeds: 152 to 1,640 RPM, Mechanical Threading, Stock Reel & Stand, Approx 20 HP, Three Phase Motor and Controls, s/n 40240, Approx: 147" x 48" x 106" with 8' Reel and 23,200 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

701.Assortment of HSS Drills, Fasteners and More.
Loc: CNC
702.Large Group of Assorted Winter Thread Roll Components and Repair Parts.
Loc: T-13
703.Western Model WP1000 Floor Scale, 1000 lb Capacity, s/n: 062383-9 and Approx. 24" x 36" x 46".
704.Harding Model AHC Parts Machine. 88" x 50" x 72".

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

705.Flatbed Shop cart with Wood Decking. 32" x 48" Bed Size.
Loc: CNC
706.Large Group of Assorted Hold Down Hardware, Collets, Cutters, Machine Parts and More.
Loc: T-2
707.Banding Cart with 5/8" Steel Banding, tensioner, Crimper, Cutter and Clips.
Loc: CNC
708.Assorted Pushers for 1", 1-1/4", 1-5/8" Acme.
709.Nichols Horizontal Milling Machine. 21" x 4" Table, 3-Phase, 44" x 36" x 63".

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

710.Custom Made Hydraulic Press. 2" Throat, 4" Max Under Ram, Dual Palm Switches, 30" x 26" x 62".
711.(12) Collets for 7/8" Acme.
Loc: BS-11
712.Rolling Stock Cart. Contents NOT Included)
713.Pushers for 1-1/4" Acme.
Loc: CNC
714.(30) Collets for 9/16" Acme.
Loc: CNC
715.(12) Collets for 1" Acme.
Loc: BS-11
716.(24) Pushers for 1" Acme.
Loc: CNC
717.(10) Collets for 1" Acme.
Loc: CNC
718.(36) Collets for 9/16" Acme.
Loc: CNC
719.(13) Pushers for 1-1/4" Acme.
720.(30) Collets for 9/16" Acme.
Loc: CNC
721.Enco Model 151-3070 Dust Collector. 2 hp, 1-Phase, 40" x 24" x 46".
722.(15) Pushers for 2" Acme.
Loc: BS-11
723.Pallet of Assorted Spindle Bearings.
Loc: CNC
724.Brown and Sharp Dust Collector.
725.(17) Pushers for 1-5/8" Acme.
Loc: BS-11
726.Contents of Pallet Including: Hydraulic Power Unit, Baldor Double End Grinder and More.
Loc: CNC
727.Shelf with Contents of Assorted Automotive Supplies, Paints, Chemicals and More.
728.Crate of Assorted Cams for Various Acme Screw Machines.
Loc: CNC
729.Johnson Model 3A8 Gas Powered Forge. 14" x 9" x 8" Chamber Size, 23" x 15" x 19" Overall.
730.Quincy Model 350 Compressor Head with Approx 80-Gallon Receiver Tank.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

731.Massive Lot of Buckets.
732.Tennant Model 465 Floor Scrubber.

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

733.Matsuura Model MC500 Vertical Machining Center for Parts Only. s/n: 81041842 (New in 1991) Approx: 70" x 66" x 97" and 6,000 Lbs

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

734.Acme Gridley 6-Spindle Screw Machine for Parts. Approx: 115" x 44" x 91"

Kanga Machinery has inspected this item and is prepared to give rigging quotes. Please Contact Jack at (701) 899-0543 for more information.

735.Assorted Machine parts for Acme Screw Machines.
Loc: BS-7
736.Pallet of Assorted Machine Parts, Tooling and More.
737.Large Group of Assorted Push Tubes for Acme Screw Machines.
738.Pallet of Assorted Collet Pads, Pusher Pads, for Assorted Acme Screw Machines.
739.Large Lot of Assorted Push Tubes for Various Sizes of Acme Screw Machines.
740.Large Lot of Assorted Tooling for Acme Screw Machines Including: Collet Pads, Pushers, Dovetail Cutters and More.
741.(2) Adjustable Boring Heads on 1-1/2" Shank. 1" Tool Holes.
Loc: T-13
743.(9) Flatform Toolholders and (1) Knurling Attachment for 4" Acme.
744.Pallet of Assorted Machine Parts for Acme Gridley Screw Machines.
750.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 302 to 2,370 RPM, Stock Reel & Stand, Approx 20 HP, Three Phase Motor and Controls, s/n 71433-A, Approx: 114" x 42" x 92" and 13,500 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

751.(3) Tapping Heads, Some for Parts or Repair.
Loc: CNC
752.3-1/2" Small Machinists Vise.
Loc: CNC
753.(2) Rolling Shelf Units w/ Adjustable Height Shelves, (1) 36"x18"x56" w/ 6 Shelves, (1) 36"x16"x47" w/ 5 Shelves, Contents Not Included.
754.2 Wheel Dolly w/ Steel Wheels, Platform Measures 13"x11", Overall: 13"x20"x50".
755.Assortment of Mostly Hardinge 22C Collets.
Loc: CNC
756.Assorted Cams For Acme Screw Machine Including 1", 1-1/4", 1-3/8", 1-1/2".
759.Meco Model W12D 55 Gallon Drum Dolly, 1000 Lb. Max Cap.
760.Synchronized Milling Attachment for 1-5/8" Acme.
Loc: CNC
761.Large Group of Assorted Custom Cutters, MT Shank Drill Bits, Fasteners and More.
762.Assorted Humpback End Slide Tooling for 2-5/8" Acme.
Loc: T-4
763.Assorted Cams for 1-5/8" and 2-5/8" Acme.
Loc: CNC
764.Assorted Tooling and Parts for Acme Screw Machines.
765.Assortment of Machine Tooling.
Loc: CNC
766.Withdrawn By Seller

Approx. 55' Run of Buss Bar with (8) Junction Boxes. Buyer Responsible for Disconnect and Removal.

767.Withdrawn By Seller

Approx. 55' Run of Buss Bar with (14) Junction Boxes. Buyer Responsible for Disconnect and Removal.

768.Withdrawn By Seller

Approx. 35' Run of Buss Bar with (10) Junctions. Buyer Responsible for Disconnect and Removal.

778.Stock Cart, Overall: 60"x24" , Platform Height 27-1/2", Upright Bars 12" Tall.
Loc: CNC
779.Ceco Model 44DP Cart, Overall: 44"x25"x29-1/2".
780.Assortment of Acme Cams Including: 1/4", 5/8", 1", and More.
781.16 Drawer Parts Cabinet, Overall: 34"x12"x10-1/2".
782.Pallet of Assorted Tooling and Parts Including: Collet Pads, Collets, Hold Down Hardware, Machine Parts, Fasteners, Springs, and More Shown.
783.Metal Chip Cart, Overall 28-1/2"x47"x33".
785.Taft-Pierce Mfg. Metal Surface Plate, Overall: 18"x14"x4-1/8".
Loc: CNC
788.Assortment of Acme Cams Primarly for 1-5/8" Acme
789.Large Assortment of Acme Cams from 3/8" Up to 1-1/4", Primarly for 2-5/8" Acme
790.Assorted Cross Slide and Other Cams Primarily for 1-1/4" Acme Gridley
800.Acme Gridley Model RA-6 Automatic Screw Machine, 1-1/4" Capacity, 6-Spindles, Collet Capacities: 1-1/4" Round, 7/8" Square, and 1-3/32" Hexagon, 7" Maximum Stock Feed Length, 6" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 302 to 2,370 RPM, Auger Type Chip Conveyor, Stock Reel & Stand, Approx 20 HP, Three Phase Motor and Controls, s/n 70274, Approx: 143" x 48" x 88" with 9' Reel and 13,500 Lbs

Click on lot for machine video.

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

850.Acme Gridley Model RA-6 Automatic Screw Machine, 1" Capacity, 6-Spindles, Collet Capacities: 1" Round, 45/64" Square, and 55/64" Hexagon, 5" Maximum Stock Feed Length, 5" Maximum Turning Length, Flat End Slide, Spindle Speeds: 289 to 2,383 RPM, Paddle Type Chip Conveyor, Stock Reel & Stand, 15 HP, Three Phase Motor and Controls, s/n A-23877, Approx: 116" x 43" x 91" and 11,300

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.

900.Acme Gridley Model RA-6 Automatic Screw Machine, 2-5/8" Capacity, 6-Spindles, Collet Capacities: 2-5/8" Round, 1-27/32" Square, and 2-17/64" Hexagon, 10" Maximum Stock Feed Length, 8" Maximum Turning Length, Humpback End Slide, Spindle Speeds: 101 to 1,065 RPM, Mechanical Threading Clutches, Universal Chip Conveyor, Stock Reel & Stand, Approx 40 HP, Three Phase Motor and Controls, s/n 84535, Approx: 159" x 55" x 102" with 8' Reel and 29,100 Lbs

Kanga Machinery Movers is prepared to give a basic lift and load quote for this item. Please contant Jack at 701-899-0543 with questions.