Keywords:
Bidding extended on Open items for 2 minutes since last bid.
Category: ALL (258 records) D-Mold Builder - Tuesday, September 11, 2018 Tuesday, September 11, 2018 - Starting at 10:00am CDT

Item Photo Description Bids High
Bidder
Current
Amount
Next Bid
Required
Your
Bid
Your
Maximum
1

more
pics

thumb_DSC02369A.JPGMilltronics Model Partner "Microcut" CNC Vertical Milling Machine, 50" x 10" T-Slotted Table, 36" X-Travel, 16" Y-Travel, 5" Z-Travel, 16" Vertical Knee Travel, , 50-3750 rpm, Centurion V CNC Controls, Kurt Power Draw Bar, In-base Coolant Tank with Pump, 5 hp, 220 volt, 3-Phase, s/n: 2208, Approx. 84" x 78" x 90" and 2700 lbs Overall. (Note: CNC Operation is Not Functional. Machine is currently being used as a manual machine)
Click on Lot for Machine Video

TK Rigging has inspected this item and has Quoted $150 for a Basic Lift and Load of this Item. TK Rigging will be Onsite Thursday, Sept. 20th ONLY. Loadout on Any Other Day Will Result in Additional Fees. Please Contact Tom Kluge at 651-688-0384 for more information.

17 23700 1,881.00   ended
2

more
pics

thumb_DSC01939A.JPGKurt Model D688 6" Precision Machine Vise with Handle. s/n: 078461. 10 1027 300.01   ended
3

more
pics

thumb_DSC02089A.JPGH. Gerstner and Sons Oak Machinists Chest with (12) Drawers. 26" x 11" x 16" Overall. (Brand NEW Never Used) 29 34431 526.00   ended
3 1 thumb_15BP.jpgHoff Online Auctions will charge a 15% Buyer's Premium on all items at this sale. Click on this lot for more information.         ended
3 2 thumb_PREVIEW_BTD2.jpgPlease click on this lot for Preview Times at the D-Mold Builder Online Auction.         ended
3 3 thumb_rigger22.jpgPlease click on this lot for Rigging Information at the D-Mold Builder Online Auction.         ended
3 4 thumb_ups.jpgUPS Shipping Available for small items Click here for more information.         ended
3 5 thumb_eb.jpgThis auction features EXTENDED BIDDING! View this lot to learn more.         ended
3 6 thumb_3lpm.jpgThis auction STARTS TO CLOSE at 10:00 AM Central Time at a rate of 3 lots per minute. Click this lot to learn more.         ended
3 7 thumb_clock.jpgHow much time is left?         ended
3 8 thumb_removal.jpgClick on This Lot For Important Removal Information at the D-Mold Builder Online Auction.         ended
4

more
pics

thumb_DSC01954A.JPGAloris BXA 2-Sided Tool Post w/ BXA1 Quick Change Holder. 8 34455 165.00   ended
5

more
pics

thumb_DSC02007A.JPGKennedy 2-Piece Stackable Machinists Chest, 5-Drawer Top Cabinet, 8-Drawer Bottom, 28" x 19" x 52" Overall. 12 34457 330.00   ended
6

more
pics

thumb_DSC01967A.JPGHermann Schmidt 3" Toolmakers Vise with Work stop and Handle. 13 34228 157.00   ended
7

more
pics

thumb_DSC01926A.JPGHeavy Duty Mold Makers Bench with 6' x 3' x 3/16" Top Plate. 30" Table Height. (Contents NOT Included).

TK Rigging has inspected this item and has Quoted $50 for a Basic Lift and Load of this Item. TK Rigging will be Onsite Thursday, Sept. 20th ONLY. Loadout on Any Other Day Will Result in Additional Fees. Please Contact Tom Kluge at 651-688-0384 for more information.

6 34443 130.00   ended
8

more
pics

thumb_DSC01945A.JPGSuburban Tool co. Model MC-66-S1 Magnetic Sine Chuck. 6" x 6" x 4-1/2", s/n: 230-0002. 21 34228 395.00   ended
10

more
pics

thumb_DSC01972A.JPGKomet "Urma" Adjustable Boring Head on Command C4U3-0004 Cat 40 Taper Holder. Comes with (6) Assorted Boring Bars (4) Are Carbide and Assorted Inserts. 8 13372 160.00   ended
11

more
pics

thumb_DSC01994A.JPG(30) 5C Collets with Caddy. Sizes up to 1-1/16". 7 34456 42.00   ended
12

more
pics

thumb_DSC00447Y.JPGAccupro Rockwell Hardness Tester w/ Calibration Blocks and Anvils, Stock No. 06534051, 5" Throat, 4" Max Holding Cap., Includes (5) Calibration Stones, and (3) Platforms, Overall: 8"x18"x25". 19 20934 435.00   ended
13

more
pics

thumb_DSC00758Y.JPGHuot 3 Drawer #13050 Letter Drill Index Cabinet w/ Contents of Drills. 13 30350 65.00   ended
14

more
pics

thumb_DSC02155A.JPGSuburban Tools Model MG-5-CV-S1 Powered Master Grind Index Fixture with 15" L Fitted Base, Tailstock. 6-1/2" Max Between Centers, 3" Center Height, 5C Spindle, 5" Dia. Mag Chuck, 1/15 hp Variable Speed Motor, 1725 max rpm, s/n: 2503-9404. 28 1136 1,050.00   ended
15

more
pics

thumb_DSC02484A.JPGMiller Model Synchrowave 180 SD CC AC/DC Squarewave Power Source. 180 amps, 15 volts, @10% Duty Cycle (Wire), 180 amps, 27 volts @ 10% Duty Cycle (Stick), Cart Mounted with Ground Clamp, Wire and Stick Guns, Foot Switch Controlled, 230 volt, 20" x 36" x 34" Overall.

TK Rigging has inspected this item and is prepared to give rigging quotes. TK Rigging will be Onsite Thursday, Sept. 20th ONLY. Loadout on Any Other Day Will Result in Additional Fees. Please Contact Tom Kluge at 651-688-0384 for more information.

18 32579 701.00   ended
16

more
pics

thumb_DSC01988A.JPGDake Model No. 1 Arbor Press. 1-1/2" x 1-1/2" Ram, 11-1/2" Max Under Ram, 7" Throat, 14" x 18" x 23" Overall. 14 34443 145.00   ended
17

more
pics

thumb_DSC01959A.JPGHermann Schmidt Clearview Radi-Angle Form Wheel Dresser. 29 34228 577.00   ended
18

more
pics

thumb_DSC02267A.JPG(7) Accupro p/n: 0615498 2.6" x 1" Tool makers Vises. (NEW) 19 34228 210.00   ended
19

more
pics

thumb_DSC01980A.JPGNikken NX5 BT40 Taper Spindle Speeder. 15000 Max RPM, .0004" Concentricity, SK-10 Collet Set and Wood Case. 16 32154 445.00   ended
20

more
pics

thumb_DSC01998A.JPGDarex 1/3 hp Drill Sharpener, 1/16" to 3/4" Capacity, 3450 rpm, 115 volt, s/n: 531609C, Approx. 16"x 16" x 44". 13 34423 640.00   ended
21

more
pics

thumb_DSC02046A.JPGFowler No. 52-553-001 ID Dial Caliper Gage, .001", 3/8" to 1-3/8". 11 13372 114.00   ended
22

more
pics

thumb_DSC02049A.JPG(2) Interapid .0005" Dial Indicators, (1) 312B-2, (1) 312B-2V. 11 14480 120.00   ended
23

more
pics

thumb_DSC02056A.JPG(2) Assorted Dial Calipers. (1) Brown and Sharpe 579-1, .001", 6" and (1) Mitutoyo No. 505-645-50, .001", 12". 4 27480 50.00   ended
24

more
pics

thumb_DSC00629Y.JPG(2) Small Angle Plates, (1) Challenge 4"x5"x1" Thick, (1) 4-1/2"x3"x1/2" Thick. 6 34348 32.50   ended
25

more
pics

thumb_DSC00524Y.JPGApprox. (50) Solid Carbide Endmills and Tool Bits, Dia. From Approx. 1/32" Up to 5/8". 19 32136 75.00   ended
26

more
pics

thumb_DSC00603Y.JPG(2) J C Busch Co. #2712 Angle Plates, 6-1/4"x10" 90 Degree Plate, 6-1/4"x6" Bottom Plate, 5/8" Thick. 7 32362 47.50   ended
27

more
pics

thumb_DSC00652Y.JPG(24) TG100 Collets From 1/16" Up to Approx. 7/8". 6 34018 19.48   ended
28

more
pics

thumb_DSC00533Y.JPGApprox. (150) HSS Reamers, Many New, Dia. From 3/32" Up to 1-1/8". 9 32362 185.00   ended
29

more
pics

thumb_DSC00598Y.JPGWood 2 Door Cabinet w/ Contents, Overall: 48"x25"x33". 1 34348 1.00   ended
30

more
pics

thumb_DSC02461A.JPGAirflow Systems Model PC1000-PG7-A/P Dust Collector, Cartridge Type, 3450 rpm, 2 hp, 230 volt, 3-Phase, s/n: 93339 (New in 1994), Approx. 46" x 30" x 85" Overall. (Note: Buyer Responsible for Removal. Item is Located in a Room and will need to be Tipped to remove)

TK Rigging has inspected this item and has Quoted $150 for a Basic Lift and Load of this Item. TK Rigging will be Onsite Thursday, Sept. 20th ONLY. Loadout on Any Other Day Will Result in Additional Fees. Please Contact Tom Kluge at 651-688-0384 for more information.

3 34443 211.00   ended
31

more
pics

thumb_DSC04719W.JPG(55) 2 Flute, Mostly Double end, HSS Endmills.1/16"- 1/8" 7 32136 32.50   ended
32

more
pics

thumb_DSC04725W.JPGWater Connectors, 1/8" Pipe, 1/4" Pipe, 3/8" and 1/2" Plugs, and More. 8 32362 22.50   ended
33

more
pics

thumb_DSC04734W.JPGWater Connectors 1/8" Pipe, Misc. Air Fittings. 4 17647 4.00   ended
34

more
pics

thumb_DSC02059A.JPGAssorted Inspection Including: Starrett No. 436 4"-5" Micrometer, Mitutoyo no. 117-107 0-1" Blade Micrometer, .0001" (1) Mitutoyo No. 123-125A Disk Micrometer and Angle Gage Set. 10 27568 110.50   ended
35

more
pics

thumb_DSC02064A.JPGAssorted Indicator Stands Including: Starrett No. 657, Enco, Noga and More. 10 34423 62.00   ended
36

more
pics

thumb_DSC02052A.JPG(2) .0005" Dial Indicators, (1) Brown and Sharpe 7030-5 Best Test and (1) Interapid 312B-1. 13 32362 70.00   ended
37

more
pics

thumb_DSC01931A.JPGRock of Ages 48" x 36" x 8" Single Lip Granite Inspection Plate on Metal Stand, .0003" Accuracy, s/n: 5066-304-2, 36" Height and Approx. 1250 lbs.

TK Rigging has inspected this item and has Quoted $75 for a Basic Lift and Load of this Item. TK Rigging will be Onsite Thursday, Sept. 20th ONLY. Loadout on Any Other Day Will Result in Additional Fees. Please Contact Tom Kluge at 651-688-0384 for more information.

8 13837 630.00   ended
38

more
pics

thumb_DSC04741W.JPG(20) Water Baffles, Assorted Sizes. 5 32362 27.50   ended
39

more
pics

thumb_DSC04748W.JPGPerformax Welding Helmet. Auto-Dimming 4 6088 28.50   ended
40

more
pics

thumb_DSC04754W.JPGMisc. Hand Tools. Includes Files, Allen Wrenches, Box End Wrenches, and More. 3 34443 14.50   ended
41

more
pics

thumb_DSC04760W.JPG(60+) Carbide Endmills, Mostly 4 Flute, Sizes 1/32"-3/8". 24 32136 300.00   ended
42

more
pics

thumb_DSC04770W.JPGFastener Assortment. Mostly Socket Head Cap Screws. 7 33522 47.50   ended
43

more
pics

thumb_DSC04783W.JPGAssortment of Hand Tools. Including Channel-lock Nut Drivers, Sockets, Hand Drill, and More. 2 14622 2.00   ended

Bidder number Password - Increments

Select page to view: p1