Keywords:
Bidding extended on Open items for 2 minutes since last bid.
Category: MACHINERY MISC (21 records) September 2012 Machinery Exchange - Thursday, September 6, 2012 Thursday, September 20, 2012 - Starting at 10:00am

Item Photo (Off) Description Bids High
Bidder
Current
Amount
Next Bid
Required
Your
Bid
Your
Maximum
62

more
pics

thumb_DSC09434L.JPGRhodes Mfg. Co. Mechanical Shaping Machine. 7" Stroke, (3) Belted Speeds, 7"x7" T-Slotted Table, 6 3/4" Longitudinal Table Travel, 9" Vertical Table Travel, 2 1/4" Vertical Head Adjustment, Rocker Style Tool Post, On Wheels, 1/2HP 110/220 Volt Motor, s/n: na. Approx 27"x36"x57"

Forklift for Hire has quoted $25 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

16 27981 600.66   ended
80

more
pics

thumb_DSC09008L.JPGUni-Hydro Model DT150-24 Hydraulic Iron Worker. 150-Ton Capacity, 1 7/8" Punch Capacity in 1" Steel, 24" Punch Station Throat, 1"x24" Flat Shear Capacity, 6"x6"x3/8" Angle Shear Capacity, Remote Foot Switch, Assorted Punches and Dies up to 1 5/8" 3,000psi Hydraulics, 7 1/2HP 3-Phase Motor and Controls, s/n: na. Approx 48"x100"x94" and 8,000 lbs.

Video Available. Click on lot to view.

Location: Fargo, ND

21 10892 6,600.00   ended
93

more
pics

thumb_DSC09176L.JPGG. U. K. Model TMA Diamond Blade Saw. 6" Blade Diameter, Hydraulic Feed, Coolant, 440 Volt 3-Phase Motor and Controls, s/n: 6011. Approx 50"x36"x76"

Forklift for Hire has quoted $50 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

10 26418 61.00   ended
95

more
pics

thumb_DSC08985L.JPGLinde Model CM-56 Flame Cutter. (4) Torch Heads, Approx 30'x12' Capacity, Oxy-Acetylene Fired, Water Table, UCNC-7 Control, 480 Volt 3-Phase, s/n: AXY31864180.

Location: North of Fargo Approximately 20 Miles. Bridge and Table are in different locations.

Buyer may take all or part of this machine.

3 27882 60.00   ended
130

more
pics

thumb_DSC08561L.JPGDo-All Model C-5A Automatic Horizontal Band Saw. 9"x10" Rated Capacity in Flats, 9 3/4" Capacity in Rounds, Variable Blade Speeds: 105 to 275 FPM, 1/8" to 14" Single Stroke Feed Length, 3/4" Blade, Hydraulic Down feed, Coolant System, 2HP 220/440 Volt 3-Phase Motor and Controls, s/n: 314-74270. Approx 67"x105"x51" and 900 lbs.

Forklift for Hire has quoted $50 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

24 8701 501.51   ended
170

more
pics

thumb_DSC09351L.JPGHardinge Model HC Single Spindle Automatic Chucker, 13" Swing Over Bed, 12" Longitudinal Travel of Turret, 5" Cross Travel of Turret, 8-Position Turret, 5C Collet Capacity, 125 to 3,000 RPM (3-Ranges), 1/4" to 10" IPM Feeds, 1-3/8" Hole Thru Spindle, 5C Collet Closer, Coolant, 1-1/2 HP, Three Phase Motor and Controls, s/n: HC-3441-M. Approx 72"x36"x74" and 2,000 lbs.

Forklift for Hire has quoted $100 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

13 23952 686.00   ended
205 1

more
pics

DSC01053H_SMALL.jpgCincinnati Model 50-4 75-Ton Mechanical Power Press Brake, 75-Ton Rated Capacity, 1/4" x 6' Mild Steel Bending Capacity, 6' Bed and Ram, 4' 6" Between Housings, 3" Stroke, 5" Motorized Ram Adjustment, 12" Shut Height, 8" Throat, 35-Strokes Per Minute, Hurco Model Autobend 7 CNC Back Gauge, Scientific Safety Light Curtain, Air Assist Foot Operated Clutch, Pendant Control, Flush Floor Mount, Currently on 5" I-Beams, (2) 48" Front Support Arms, 10-HP, 220/440 Volt, 3 PH, 60 hz Motor, Automatic Central Lubrication System, 1/2 HP Ram Adjustment Motor, s/n 26647, Approx. 13,000 lbs, 104" x 74" x 125"

Location: Sumner, WA

Video Available. Click on lot to view.

3 28025 260.00   ended
220

more
pics

thumb_DSC08839L.JPGNantong Vertical Milling Machine. 10"x54" T-Slotted Table, 31" Longitudinal Table Travel, 15 1/2" Cross Table Travel, 15" Vertical Knee Adjustment, 5" Quill Travel, (16) Spindle Speeds: 78 to 4,800 RPM, R8 Spindle Taper, Power Longitudinal Feed, One-Shot Lube, Drill Chuck, 220 Volt 3-Phase Motor and Controls, s/n: na. Approx 75"x72"x88" and 2,500 lbs.

Location: Fargo, ND

Note: Riser available. See lot 724.

The seller has provided Hoff Online Auctions with proof of liability insurance and will load this item for $100.

12 8263 1,800.00   ended
225 1

more
pics

DSC00901H_SMALL.jpgJet Model TWSS-3-3 Single Spindle Shaper, with Mini-Power Feeder Model MPF-3-1, 1/3-HP, 13" x 36" Work Table Area, 36" x 36" Table Area, 2-HP, 1-Ph, 60-Hz Main Motor, 1/4-HP, 1-Ph, 60-Hz Feeder Motor, Forward and Reverse, 5-Speeds: 3,000 to 10,000-RPM with Belt Change, s/n 301026, 36" x 38" x 62", Approx. 1,000-Lbs.

Location: Sumner, WA

Video Available. Click on lot to view.

8 28025 416.00   ended
245 1

more
pics

DSC00918H_SMALL.jpgTennsmith Model PN-9 Corner Notcher, 8-Gauge x 9-1/2" x 9-1/2" Mild Steel Capacity, 7.5-HP, 230/460-Volts, 3-Ph, 1-Ph, 60-Hz, Inlaid Ruler Scales, Adjustable Stops, Foot Pedal Operation, Self-Contained Hydraulic Unit, Scrap Chute and Catch Bin, One Shot Lubrication, Replaceble Blades, s/n: 14964, 43" x 44" x 44", Approx. 1,200-Lbs,

Location: Sumner, WA

Video Available. Click on lot to view.

23 27082 2,600.00   ended
305 1

more
pics

DSC00949H_SMALL.jpgJet Model DE10 Cold Saw, 20" Blade, 10-HP, 230/460 Volts, 3 PH, 60 Hz Motor, Pnuematic Head Feed, Feed Pressure Control, s/n 1975-505, 53" x 46" x 65"

Location: Sumner, WA

2 27101 104.00   ended
390

more
pics

thumb_DSC09150L.JPGKalamazoo Model H9AW Horizontal Band Saw. 9"x16" Capacity in Flats, 9" Capacity in Rounds, (4) Belted Blade Speeds: 50 to 275 FPM, 1" Max Blade Width, Coolant, 1HP 3-Phase Motor and Controls, s/n: 13.823. Approx 66"x24"x41" and 800 lbs.

Forklift for Hire has quoted $40 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

15 8577 385.00   ended
400

more
pics

thumb_DSC09291L.JPGClausing Model 5938 Engine Lathe. 13" Swing Over Bed, 7 1/2" Swing Over Cross Slide, 36" Between Centers, 1 1/4" Hole Thru Spindle, (12) Spindle Speeds: 52 to 1700 RPM, 8 1/4" 3-Jaw Chuck, Tailstock, 3-Phase Motor and Controls, s/n: 530581. Approx 72"x30"x49"

Forklift for Hire has quoted $50 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

11 20129 1,010.10   ended
410

more
pics

thumb_DSC09409L.JPGM.G. Industries Apollo HSG-6CNC Plasma/Oxy-Fuel Cutting System with System 80 CNC Control, Including 512k Memory, Short Haul Modems, CNC Drive System Providing 3 to 250 IPM, 6' Max Cut Width, 31' Max Cut Length, Dual HI/Lo Preheat Control Panel with Automatic Pierce Rate Control, Victormultiple Oxy Fuel Torches, Thermal Dynamics PAK-15XC Plasma System with Rhapsody Torch Height Control and CNC Plasma Interface, Speedaire Model 5Z656 3-in-1 Air Dryer, AP6P-HSG-NC-93-2680. New 1993. Cuts up to 5"

Forklift for Hire has quoted $125 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

14 20480 1,150.00   ended
425

more
pics

thumb_DSC09537L.JPGHermle Model FW 801 Plain Horizontal Milling Machine. 8 1/2"x31 1/2" T-Slotted Table, 14" Longitudinal Table Travel, 4 3/4" Cross Table Travel, 13" Vertical Knee Adjustment, Variable Spindle Speeds on Main Spindle: 50 to 3150 RPM, 2nd Independent Spindle with (8) Speeds: 85 to 1080 RPM, 40-Taper in Spindles, Hydraulic Clamping Fixture, 3-Phase Motor and Controls, s/n: 5553. Approx 54"x60"x70"

Forklift for Hire has quoted $75 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

7 16751 121.00   ended
430

more
pics

thumb_DSC09420L.JPGMupem Model TR 16 Single Spindle Cam Lathe. 16mm Round Bar Capacity, 70mm Max Turning Length, 770 to 3400 RPM Spindle, 35mm Cross Slide Stroke, 35mm Vertical Slide Stroke, 80mm Turret Storke, 6-Position Turret, 460 Volt 3-Phase Motor, s/n: 1223. Approx 55"x30"x57"

Forklift for Hire has quoted $50 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

4 1356 47.75   ended
435

more
pics

thumb_DSC09506L.JPGEverett Model 20 22 Abrasive Cut-Off Machine. 20" Blade Capacity, 1" Arbor, Hydraulic Feed, Will Cut Up To 3" Solids, 20HP 208-230/460 Volt 3-Phase Motor, s/n: 7440-6. Approx 48"x58"x67"

Forklift for Hire has quoted $75 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

14 27101 309.01   ended
530

more
pics

thumb_DSC09512A.JPGBridgeport Model 1J Vertical Milling Machine. 9"x42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 13" Vertical Knee Adjustmnet, 5" Quill Travel, Chrome Ways, Power Longitudinal Feed, Sony Millman 2-Axis DRO, 1HP 220 Volt 3-Phase Motor and Controls, s/n: 45537. Approx 60"x60"x78" and 2200 lbs.

Forklift for Hire has quoted $100 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

8 14366 1,921.32   ended
560

more
pics

thumb_DSC09537A.JPGHardinge Model DSM-59 Second Operation Lathe. 1-1/16" Round Bar Capacity, 13" Swing Over Bed, 30" Bed Length, Variable Spindle Speeds: 3500 RPM, 5C Collet Closer, Cross Slide, Vertical Cuto-Off Attachment, Coolant, 1HP Spindle Motor & Controls, Serial No. DV-59-8339. Approx 70"x33"x70" and 2,000 lbs

Forklift for Hire has quoted $75 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

7 21916 131.00   ended
580

more
pics

thumb_DSC09525A.JPGNichols Plain Horizontal Milling Machine. 8 3/4"x36" T-Slotted Table, 20" Longitudinal Table Travel, 4" Cross Table Travel, 6" Vertical Knee Adjustment, (3) Belted Speeds, 40-Taper in Spindle, 1 1/2HP 220/440 Volt 3-Phase Motor and Controls, s/n: 8-E-8008. Approx 53"x45"x65" 8 27981 360.00   ended
664

more
pics

thumb_DSC09576A.JPGBarker Model PMD Plain Horizontal Milling Machine. 4"x12" T-Slotted Table, 4" Head Travel, 2080220/440 Volt 3-Phase, s/n: 2292. Approx 29"x24"x50"

Forklift for Hire has quoted $40 to load this item. Please contact Dan Castonguay with loading questions 612-803-4350

5 18156 25.25   ended

Bidder number Password - Increments